| Age | Commit message (Collapse) | Author |
|---|
|
When Priority Mask Hint Enable (PMHE) == 0b1, the GIC may use the PMR
value to determine whether to signal an IRQ to a PE, and consequently
after a change to the PMR value, a DSB SY may be required to ensure that
interrupts are signalled to a CPU in finite time. When PMHE == 0b0,
interrupts are always signalled to the relevant PE, and all masking
occurs locally, without requiring a DSB SY.
Since commit:
f226650494c6aa87 ("arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clear")
... we handle this dynamically: in most cases a static key is used to
determine whether to issue a DSB SY, but the entry code must read from
ICC_CTLR_EL1 as static keys aren't accessible from plain assembly.
It would be much nicer to use an alternative instruction sequence for
the DSB, as this would avoid the need to read from ICC_CTLR_EL1 in the
entry code, and for most other code this will result in simpler code
generation with fewer instructions and fewer branches.
This patch adds a new ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap which is
only set when ICC_CTLR_EL1.PMHE == 0b0 (and GIC priority masking is in
use). This allows us to replace the existing users of the
`gic_pmr_sync` static key with alternative sequences which default to a
DSB SY and are relaxed to a NOP when PMHE is not in use.
The entry assembly management of the PMR is slightly restructured to use
a branch (rather than multiple NOPs) when priority masking is not in
use. This is more in keeping with other alternatives in the entry
assembly, and permits the use of a separate alternatives for the
PMHE-dependent DSB SY (and removal of the conditional branch this
currently requires). For consistency I've adjusted both the save and
restore paths.
According to bloat-o-meter, when building defconfig +
CONFIG_ARM64_PSEUDO_NMI=y this shrinks the kernel text by ~4KiB:
| add/remove: 4/2 grow/shrink: 42/310 up/down: 332/-5032 (-4700)
The resulting vmlinux is ~66KiB smaller, though the resulting Image size
is unchanged due to padding and alignment:
| [mark@lakrids:~/src/linux]% ls -al vmlinux-*
| -rwxr-xr-x 1 mark mark 137508344 Jan 17 14:11 vmlinux-after
| -rwxr-xr-x 1 mark mark 137575440 Jan 17 13:49 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -al Image-*
| -rw-r--r-- 1 mark mark 38777344 Jan 17 14:11 Image-after
| -rw-r--r-- 1 mark mark 38777344 Jan 17 13:49 Image-before
Prior to this patch we did not verify the state of ICC_CTLR_EL1.PMHE on
secondary CPUs. As of this patch this is verified by the cpufeature code
when using GIC priority masking (i.e. when using pseudo-NMIs).
Note that since commit:
7e3a57fa6ca831fa ("arm64: Document ICC_CTLR_EL3.PMHE setting requirements")
... Documentation/arm64/booting.rst specifies:
| - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
| all CPUs the kernel is executing on, and must stay constant
| for the lifetime of the kernel.
... so that should not adversely affect any compliant systems, and as
we'll only check for the absense of PMHE when using pseudo-NMIs, this
will only fire when such mismatch will adversely affect the system.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230130145429.903791-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There are cases where a context synchronization event is necessary
between an IRQ being raised and being handled, and there are races such
that we cannot rely upon the exception entry being subsequent to the
interrupt being raised. To fix this, we place an ISB between a read of
IAR and the subsequent invocation of an IRQ handler.
When EOI mode 1 is in use, we need to EOI an interrupt prior to invoking
its handler, and we have a write to EOIR for this. As this write to EOIR
requires an ISB, and this is provided by the gic_write_eoir() helper, we
omit the usual ISB in this case, with the logic being:
| if (static_branch_likely(&supports_deactivate_key))
| gic_write_eoir(irqnr);
| else
| isb();
This is somewhat opaque, and it would be a little clearer if there were
an unconditional ISB, with only the write to EOIR being conditional,
e.g.
| if (static_branch_likely(&supports_deactivate_key))
| write_gicreg(irqnr, ICC_EOIR1_EL1);
|
| isb();
This patch rewrites the code that way, with this logic factored into a
new helper function with comments explaining what the ISB is for, as
were originally laid out in commit:
39a06b67c2c1256b ("irqchip/gic: Ensure we have an ISB between ack and ->handle_irq")
Note that since then, we removed the IAR polling in commit:
342677d70ab92142 ("irqchip/gic-v3: Remove acknowledge loop")
... which removed one of the two race conditions.
For consistency, other portions of the driver are made to manipulate
EOIR using write_gicreg() and explcit ISBs, and the gic_write_eoir()
helper function is removed.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513133038.226182-3-mark.rutland@arm.com
|
|
We used to use a set of macros to provide support of vgic-v3 to 32bit
without duplicating everything. We don't need it anymore, so drop it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
|
|
V{PEND,PROP}BASER registers are actually located in VLPI_base frame
of the *redistributor*. Rename their accessors to reflect this fact.
No functional changes.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200206075711.1275-7-yuzenghui@huawei.com
|
|
GICv4.1 defines a new VPE table that is potentially shared between
both the ITSs and the redistributors, following complicated affinity
rules.
To make things more confusing, the programming of this table at
the redistributor level is reusing the GICv4.0 GICR_VPROPBASER register
for something completely different.
The code flow is somewhat complexified by the need to respect the
affinities required by the HW, meaning that tables can either be
inherited from a previously discovered ITS or redistributor.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20191224111055.11836-6-maz@kernel.org
|
|
The __iomem attribute should go before the * in the
prototype. Move to silence the following sparse
warnings:
./arch/arm/include/asm/arch_gicv3.h:340:15: warning: incorrect type in argument 1 (different address spaces)
./arch/arm/include/asm/arch_gicv3.h:340:15: expected void const volatile [noderef] <asn:2> *addr
./arch/arm/include/asm/arch_gicv3.h:340:15: got void *
./arch/arm/include/asm/arch_gicv3.h:343:17: warning: incorrect type in argument 2 (different address spaces)
./arch/arm/include/asm/arch_gicv3.h:343:17: expected void volatile [noderef] <asn:2> *addr
./arch/arm/include/asm/arch_gicv3.h:343:17: got void *
./arch/arm/include/asm/arch_gicv3.h:350:37: warning: incorrect type in argument 2 (different address spaces)
./arch/arm/include/asm/arch_gicv3.h:350:37: expected void volatile [noderef] <asn:2> *addr
./arch/arm/include/asm/arch_gicv3.h:350:37: got void *[noderef] <asn:2> addr
drivers/irqchip/irq-gic-v3-its.c:2832:46: warning: incorrect type in argument 2 (different address spaces)
drivers/irqchip/irq-gic-v3-its.c:2832:46: expected void *[noderef] <asn:2> addr
drivers/irqchip/irq-gic-v3-its.c:2832:46: got void [noderef] <asn:2> *
./arch/arm/include/asm/arch_gicv3.h:340:15: warning: incorrect type in argument 1 (different address spaces)
./arch/arm/include/asm/arch_gicv3.h:340:15: expected void const volatile [noderef] <asn:2> *addr
./arch/arm/include/asm/arch_gicv3.h:340:15: got void *
./arch/arm/include/asm/arch_gicv3.h:343:17: warning: incorrect type in argument 2 (different address spaces)
./arch/arm/include/asm/arch_gicv3.h:343:17: expected void volatile [noderef] <asn:2> *addr
./arch/arm/include/asm/arch_gicv3.h:343:17: got void *
./arch/arm/include/asm/arch_gicv3.h:350:37: warning: incorrect type in argument 2 (different address spaces)
./arch/arm/include/asm/arch_gicv3.h:350:37: expected void volatile [noderef] <asn:2> *addr
./arch/arm/include/asm/arch_gicv3.h:350:37: got void *[noderef] <asn:2> addr
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191017113341.13778-1-ben.dooks@codethink.co.uk
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- some cleanups
- direct physical timer assignment
- cache sanitization for 32-bit guests
s390:
- interrupt cleanup
- introduction of the Guest Information Block
- preparation for processor subfunctions in cpu models
PPC:
- bug fixes and improvements, especially related to machine checks
and protection keys
x86:
- many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations
- AVIC fixes
Generic:
- memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits)
kvm: vmx: fix formatting of a comment
KVM: doc: Document the life cycle of a VM and its resources
MAINTAINERS: Add KVM selftests to existing KVM entry
Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()"
KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()
KVM: PPC: Fix compilation when KVM is not enabled
KVM: Minor cleanups for kvm_main.c
KVM: s390: add debug logging for cpu model subfunctions
KVM: s390: implement subfunction processor calls
arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
KVM: arm/arm64: Remove unused timer variable
KVM: PPC: Book3S: Improve KVM reference counting
KVM: PPC: Book3S HV: Fix build failure without IOMMU support
Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"
x86: kvmguest: use TSC clocksource if invariant TSC is exposed
KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start
KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter
KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns
KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes()
KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children
...
|
|
We previously incorrectly named the define for this system register.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
|
|
Mask the IRQ priority through PMR and re-enable IRQs at CPU level,
allowing only higher priority interrupts to be received during interrupt
handling.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add helper functions to access system registers related to interrupt
priorities: PMR and RPR.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We would like to reset the Group-0 Active Priority Registers
at boot time if they are available to us. They would be available
if SCR_EL3.FIQ was not set, but we cannot directly probe this bit,
and short of checking, we may end-up trapping to EL3, and the
firmware may not be please to get such an exception. Yes, this
is dumb.
Instead, let's use PMR to find out if its value gets affected by
SCR_EL3.FIQ being set. We use the fact that when SCR_EL3.FIQ is
set, the LSB of the priority is lost due to the shifting back and
forth of the actual priority. If we read back a 0, we know that
Group0 is unavailable. In case we read a non-zero value, we can
safely reset the AP0Rn register.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Booting a crash kernel while in an interrupt handler is likely
to leave the Active Priority Registers with some state that
is not relevant to the new kernel, and is likely to lead
to erratic behaviours such as interrupts not firing as their
priority is already active.
As a sanity measure, wipe the APRs clean on startup. We make
sure to wipe both group 0 and 1 registers in order to avoid
any surprise.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
A new feature Range Selector (RS) has been added to GIC specification
in order to support more than 16 CPUs at affinity level 0. New fields
are introduced in SGI system registers (ICC_SGI0R_EL1, ICC_SGI1R_EL1
and ICC_ASGI1R_EL1) to relax an artificial limit of 16 at level 0.
- A new RSS field in ICC_CTLR_EL3, ICC_CTLR_EL1 and ICV_CTLR_EL1:
[18] - Range Selector Support (RSS)
0b0 = Targeted SGIs with affinity level 0 values of 0-15 are supported.
0b1 = Targeted SGIs with affinity level 0 values of 0-255 are supported.
- A new RS field in ICC_SGI0R_EL1, ICC_SGI1R_EL1 and ICC_ASGI1R_EL1:
[47:44] - RangeSelector (RS) which group of 16 TargetList[n] field
TargetList[n] represents aff0 value ((RS*16)+n)
When ICC_CTLR_EL3.RSS==0 or ICC_CTLR_EL1.RSS==0, RS is RES0.
- A new RSS field in GICD_TYPER:
[26] - Range Selector Support (RSS)
0b0 = Targeted SGIs with affinity level 0 values of 0-15 are supported.
0b1 = Targeted SGIs with affinity level 0 values of 0-255 are supported.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
When masking/unmasking a doorbell interrupt, it is necessary
to issue an invalidation to the corresponding redistributor.
We use the DirectLPI feature by writting directly to the corresponding
redistributor.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
V{PEND,PROP}BASER being 64bit registers, they need some ad-hoc
accessors on 32bit, specially given that VPENDBASER contains
a Valid bit, making the access a bit convoluted.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Wire-up flush_dcache, readq- and writeq-like gic-v3-its assessors, so
GICv3 ITS gets all it needs to be built and run.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Pull KVM updates from Radim Krčmář:
"All architectures:
- move `make kvmconfig` stubs from x86
- use 64 bits for debugfs stats
ARM:
- Important fixes for not using an in-kernel irqchip
- handle SError exceptions and present them to guests if appropriate
- proxying of GICV access at EL2 if guest mappings are unsafe
- GICv3 on AArch32 on ARMv8
- preparations for GICv3 save/restore, including ABI docs
- cleanups and a bit of optimizations
MIPS:
- A couple of fixes in preparation for supporting MIPS EVA host
kernels
- MIPS SMP host & TLB invalidation fixes
PPC:
- Fix the bug which caused guests to falsely report lockups
- other minor fixes
- a small optimization
s390:
- Lazy enablement of runtime instrumentation
- up to 255 CPUs for nested guests
- rework of machine check deliver
- cleanups and fixes
x86:
- IOMMU part of AMD's AVIC for vmexit-less interrupt delivery
- Hyper-V TSC page
- per-vcpu tsc_offset in debugfs
- accelerated INS/OUTS in nVMX
- cleanups and fixes"
* tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits)
KVM: MIPS: Drop dubious EntryHi optimisation
KVM: MIPS: Invalidate TLB by regenerating ASIDs
KVM: MIPS: Split kernel/user ASID regeneration
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
KVM: arm64: Require in-kernel irqchip for PMU support
KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL
KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie
KVM: PPC: BookE: Fix a sanity check
KVM: PPC: Book3S HV: Take out virtual core piggybacking code
KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread
ARM: gic-v3: Work around definition of gic_write_bpr1
KVM: nVMX: Fix the NMI IDT-vectoring handling
KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive
KVM: nVMX: Fix reload apic access page warning
kvmconfig: add virtio-gpu to config fragment
config: move x86 kvm_guest.config to a common location
arm64: KVM: Remove duplicating init code for setting VMID
ARM: KVM: Support vgic-v3
...
|
|
A new accessor for gic_write_bpr1 is added to arch_gicv3.h in 4.9,
whilst the CP15 accessors are redifined in a separate branch.
This leads to a horrible clash, where the new accessor ends up with
a crap "asm volatile" definition.
Work around this by carrying our own definition of gic_write_bpr1,
creating a small conflict which will be obvious to resolve.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
vgic-v3 save/restore routines are written in such way that they map
arm64 system register naming nicely, but it does not fit to arm
world. To keep virt/kvm/arm/hyp/vgic-v3-sr.c untouched we create a
mapping with a function for each register mapping the 32-bit to the
64-bit accessors.
Please, note that 64-bit wide ICH_LR is split in two 32-bit halves
(ICH_LR and ICH_LRC) accessed independently.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
Headers linux/irqchip/arm-gic.v3.h and arch/arm/include/asm/kvm_hyp.h
are included in virt/kvm/arm/hyp/vgic-v3-sr.c and both define macros
called __ACCESS_CP15 and __ACCESS_CP15_64 which obviously creates a
conflict. These macros were introduced independently for GIC and KVM
and, in fact, do the same thing.
As an option we could add prefixes to KVM and GIC version of macros so
they won't clash, but it'd introduce code duplication. Alternatively,
we could keep macro in, say, GIC header and include it in KVM one (or
vice versa), but such dependency would not look nicer.
So we follow arm64 way (it handles this via sysreg.h) and move only
single set of macros to asm/cp15.h
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
Currently, when running on FVP, CPU 0 boots up with its BPR changed from
the reset value. This renders it impossible to (preemptively) prioritize
interrupts on CPU 0.
This is harmless on normal systems since Linux typically does not
support preemptive interrupts. It does however cause problems in
systems with additional changes (such as patches for NMI simulation).
Many thanks to Andrew Thoelke for suggesting the BPR as having the
potential to harm preemption.
Suggested-by: Andrew Thoelke <andrew.thoelke@arm.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Commit 1a1ebd5 ("irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is
visible on redestributor") fixed the missing barrier on arm64, but
forgot to update the 32bit counterpart, which has the same requirements.
Let's fix it.
Fixes: 1a1ebd5 ("irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Both the 32bit and 64bit versions of the GICv3 header file are using
barriers, but neglect to include barrier.h, leading to an interesting
splat in some circumstances.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1449483072-17694-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Implement the system and memory-mapped register accesses in
asm/arch_gicv3.h for 32bit architectures.
This patch is a straightforward translation of the arm64 header. 64bit
accesses are done in two times and don't need atomicity: TYPER is
read-only, and the upper-word of IROUTER is always zero on 32bit
architectures.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
