| Age | Commit message (Collapse) | Author |
|---|
|
In order to minimize potential confusion regarding numbered labels
appearing in a different order in the assembler output due to the use of
subsections, use a named local label to jump back into the vector
handler code from the associated loop8 mitigation sequence.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The loop8 mitigation for Spectre-BHB only requires a CPU local DSB
rather than a systemwide one, which is much more costly. And by the same
reasoning as why it is justified to omit the ISB after BPIALL, we can
also elide the ISB and rely on the exception return for the context
synchronization.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The BPIALL mitigation for Spectre-BHB adds a single instruction to the
handler sequence that doesn't clobber any registers. Given that these
sequences are 10 instructions long, they don't fit neatly into a
cacheline anyway, so we can simply move that single instruction to the
start of the unmitigated one, and rearrange the symbol names accordingly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
ARMv7 has MOVW/MOVT instruction pairs to load symbol addresses into
registers without having to rely on literal loads that go via the
D-cache. For older cores, we now support a similar arrangement, based
on PC-relative group relocations.
This means we can elide most literal loads entirely from the entry path,
by switching to the ldr_va macro to emit the appropriate sequence
depending on the target architecture revision.
While at it, switch to the bl_r macro for invoking the right PABT/DABT
helpers instead of setting the LR register explicitly, which does not
play well with cores that speculate across function returns.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In Thumb2, 'b . + 4' produces a branch instruction that uses a narrow
encoding, and so it does not jump to the following instruction as
expected. So use W(b) instead.
Fixes: 6c7cb60bff7a ("ARM: fix Thumb2 regression with Spectre BHB")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.
The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.
The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().
Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.
The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.
Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.
v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Patch series "Convert vmcore to use an iov_iter", v5.
For some reason several people have been sending bad patches to fix
compiler warnings in vmcore recently. Here's how it should be done.
Compile-tested only on x86. As noted in the first patch, s390 should take
this conversion a bit further, but I'm not inclined to do that work
myself.
This patch (of 3):
Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter.
s390 needs more work to pass the iov_iter down further, or refactor, but
I'd be more comfortable if someone who can test on s390 did that work.
It's more convenient to convert the whole of read_from_oldmem() to take an
iov_iter at the same time, so rename it to read_from_oldmem_iter() and add
a temporary read_from_oldmem() wrapper that creates an iov_iter.
Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With SIGTRAP on perf events, we have encountered termination of
processes due to user space attempting to block delivery of SIGTRAP.
Consider this case:
<set up SIGTRAP on a perf event>
...
sigset_t s;
sigemptyset(&s);
sigaddset(&s, SIGTRAP | <and others>);
sigprocmask(SIG_BLOCK, &s, ...);
...
<perf event triggers>
When the perf event triggers, while SIGTRAP is blocked, force_sig_perf()
will force the signal, but revert back to the default handler, thus
terminating the task.
This makes sense for error conditions, but not so much for explicitly
requested monitoring. However, the expectation is still that signals
generated by perf events are synchronous, which will no longer be the
case if the signal is blocked and delivered later.
To give user space the ability to clearly distinguish synchronous from
asynchronous signals, introduce siginfo_t::si_perf_flags and
TRAP_PERF_FLAG_ASYNC (opted for flags in case more binary information is
required in future).
The resolution to the problem is then to (a) no longer force the signal
(avoiding the terminations), but (b) tell user space via si_perf_flags
if the signal was synchronous or not, so that such signals can be
handled differently (e.g. let user space decide to ignore or consider
the data imprecise).
The alternative of making the kernel ignore SIGTRAP on perf events if
the signal is blocked may work for some usecases, but likely causes
issues in others that then have to revert back to interception of
sigprocmask() (which we want to avoid). [ A concrete example: when using
breakpoint perf events to track data-flow, in a region of code where
signals are blocked, data-flow can no longer be tracked accurately.
When a relevant asynchronous signal is received after unblocking the
signal, the data-flow tracking logic needs to know its state is
imprecise. ]
Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220404111204.935357-1-elver@google.com
|
|
Pull ARM fixes from Russell King:
- avoid unnecessary rebuilds for library objects
- fix return value of __setup handlers
- fix invalid input check for "crashkernel=" kernel option
- silence KASAN warnings in unwind_frame
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0'
ARM: 9187/1: JIVE: fix return value of __setup handler
ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
|
|
|
|
The following KASAN warning is detected by QEMU.
==================================================================
BUG: KASAN: stack-out-of-bounds in unwind_frame+0x508/0x870
Read of size 4 at addr c36bba90 by task cat/163
CPU: 1 PID: 163 Comm: cat Not tainted 5.10.0-rc1 #40
Hardware name: ARM-Versatile Express
[<c0113fac>] (unwind_backtrace) from [<c010e71c>] (show_stack+0x10/0x14)
[<c010e71c>] (show_stack) from [<c0b805b4>] (dump_stack+0x98/0xb0)
[<c0b805b4>] (dump_stack) from [<c0b7d658>] (print_address_description.constprop.0+0x58/0x4bc)
[<c0b7d658>] (print_address_description.constprop.0) from [<c031435c>] (kasan_report+0x154/0x170)
[<c031435c>] (kasan_report) from [<c0113c44>] (unwind_frame+0x508/0x870)
[<c0113c44>] (unwind_frame) from [<c010e298>] (__save_stack_trace+0x110/0x134)
[<c010e298>] (__save_stack_trace) from [<c01ce0d8>] (stack_trace_save+0x8c/0xb4)
[<c01ce0d8>] (stack_trace_save) from [<c0313520>] (kasan_set_track+0x38/0x60)
[<c0313520>] (kasan_set_track) from [<c0314cb8>] (kasan_set_free_info+0x20/0x2c)
[<c0314cb8>] (kasan_set_free_info) from [<c0313474>] (__kasan_slab_free+0xec/0x120)
[<c0313474>] (__kasan_slab_free) from [<c0311e20>] (kmem_cache_free+0x7c/0x334)
[<c0311e20>] (kmem_cache_free) from [<c01c35dc>] (rcu_core+0x390/0xccc)
[<c01c35dc>] (rcu_core) from [<c01013a8>] (__do_softirq+0x180/0x518)
[<c01013a8>] (__do_softirq) from [<c0135214>] (irq_exit+0x9c/0xe0)
[<c0135214>] (irq_exit) from [<c01a40e4>] (__handle_domain_irq+0xb0/0x110)
[<c01a40e4>] (__handle_domain_irq) from [<c0691248>] (gic_handle_irq+0xa0/0xb8)
[<c0691248>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x94)
Exception stack(0xc36bb928 to 0xc36bb970)
b920: c36bb9c0 00000000 c0126919 c0101228 c36bb9c0 b76d7730
b940: c36b8000 c36bb9a0 c3335b00 c01ce0d8 00000003 c36bba3c c36bb940 c36bb978
b960: c010e298 c011373c 60000013 ffffffff
[<c0100b0c>] (__irq_svc) from [<c011373c>] (unwind_frame+0x0/0x870)
[<c011373c>] (unwind_frame) from [<00000000>] (0x0)
The buggy address belongs to the page:
page:(ptrval) refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x636bb
flags: 0x0()
raw: 00000000 00000000 ef867764 00000000 00000000 00000000 ffffffff 00000000
page dumped because: kasan: bad access detected
addr c36bba90 is located in stack of task cat/163 at offset 48 in frame:
stack_trace_save+0x0/0xb4
this frame has 1 object:
[32, 48) 'trace'
Memory state around the buggy address:
c36bb980: f1 f1 f1 f1 00 04 f2 f2 00 00 f3 f3 00 00 00 00
c36bba00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>c36bba80: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
c36bbb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c36bbb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
There is a same issue on x86 and has been resolved by the commit f7d27c35ddff
("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to arm architecture too.
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Reported-by: He Ying <heying24@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add invalid input check expression when 'crashkernel=0' is specified
running kdump.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
|
|
Pull ARM updates from Russell King:
"Updates for IRQ stacks and virtually mapped stack support, and ftrace:
- Support for IRQ and vmap'ed stacks
This covers all the work related to implementing IRQ stacks and
vmap'ed stacks for all 32-bit ARM systems that are currently
supported by the Linux kernel, including RiscPC and Footbridge. It
has been submitted for review in four different waves:
- IRQ stacks support for v7 SMP systems [0]
- vmap'ed stacks support for v7 SMP systems[1]
- extending support for both IRQ stacks and vmap'ed stacks for all
remaining configurations, including v6/v7 SMP multiplatform
kernels and uniprocessor configurations including v7-M [2]
- fixes and updates in [3]
- ftrace fixes and cleanups
Make all flavors of ftrace available on all builds, regardless of
ISA choice, unwinder choice or compiler [4]:
- use ADD not POP where possible
- fix a couple of Thumb2 related issues
- enable HAVE_FUNCTION_GRAPH_FP_TEST for robustness
- enable the graph tracer with the EABI unwinder
- avoid clobbering frame pointer registers to make Clang happy
- Fixes for the above"
[0] https://lore.kernel.org/linux-arm-kernel/20211115084732.3704393-1-ardb@kernel.org/
[1] https://lore.kernel.org/linux-arm-kernel/20211122092816.2865873-1-ardb@kernel.org/
[2] https://lore.kernel.org/linux-arm-kernel/20211206164659.1495084-1-ardb@kernel.org/
[3] https://lore.kernel.org/linux-arm-kernel/20220124174744.1054712-1-ardb@kernel.org/
[4] https://lore.kernel.org/linux-arm-kernel/20220203082204.1176734-1-ardb@kernel.org/
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (62 commits)
ARM: fix building NOMMU ARMv4/v5 kernels
ARM: unwind: only permit stack switch when unwinding call_with_stack()
ARM: Revert "unwind: dump exception stack from calling frame"
ARM: entry: fix unwinder problems caused by IRQ stacks
ARM: unwind: set frame.pc correctly for current-thread unwinding
ARM: 9184/1: return_address: disable again for CONFIG_ARM_UNWIND=y
ARM: 9183/1: unwind: avoid spurious warnings on bogus code addresses
Revert "ARM: 9144/1: forbid ftrace with clang and thumb2_kernel"
ARM: mach-bcm: disable ftrace in SMC invocation routines
ARM: cacheflush: avoid clobbering the frame pointer
ARM: kprobes: treat R7 as the frame pointer register in Thumb2 builds
ARM: ftrace: enable the graph tracer with the EABI unwinder
ARM: unwind: track location of LR value in stack frame
ARM: ftrace: enable HAVE_FUNCTION_GRAPH_FP_TEST
ARM: ftrace: avoid unnecessary literal loads
ARM: ftrace: avoid redundant loads or clobbering IP
ARM: ftrace: use trampolines to keep .init.text in branching range
ARM: ftrace: use ADD not POP to counter PUSH at entry
ARM: ftrace: ensure that ADR takes the Thumb bit into account
ARM: make get_current() and __my_cpu_offset() __always_inline
...
|
|
When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit b6506981f880 ("ARM: unwind: support unwinding across multiple
stacks") updated the logic in the ARM unwinder to widen the bounds
within which SP is assumed to be valid, in order to allow the unwind to
traverse from the IRQ stack to the task stack. This is necessary, as
otherwise, unwinds started from the IRQ stack would terminate in the IRQ
exception handler, making stacktraces substantially less useful.
This turns out to be a mistake, as it breaks asynchronous unwinding
across exceptions, when the exception is taken before the stack frame is
consistent with the unwind info. For instance, in the following
backtrace:
...
generic_handle_arch_irq from call_with_stack+0x18/0x20
call_with_stack from __irq_svc+0x80/0x98
Exception stack(0xc7093e20 to 0xc7093e68)
3e20: b6a94a88 c7093ea0 00000008 00000000 c7093ea0 b7e127d0 00000051 c9220000
3e40: b6a94a88 b6a94a88 00000004 0002b000 0036b570 c7093e70 c040ca2c c0994a90
3e60: 20070013 ffffffff
__irq_svc from __copy_to_user_std+0x20/0x378
...
we need to apply the following unwind directives:
0xc099720c <__copy_to_user_std+0x1c>: @0xc295d1d4
Compact model index: 1
0x9b vsp = r11
0xb1 0x0d pop {r0, r2, r3}
0x84 0x81 pop {r4, r11, r14}
0xb0 finish
which tell us to switch to the frame pointer register R11 and proceed
with the unwind from that. However, having been interrupted 0x20 bytes
into the function:
c09971f0 <__copy_to_user_std>:
c09971f0: e59f3350 ldr r3, [pc, #848]
c09971f4: e243c001 sub ip, r3, #1
c09971f8: e05cc000 subs ip, ip, r0
c09971fc: 228cc001 addcs ip, ip, #1
c0997200: 205cc002 subscs ip, ip, r2
c0997204: 33a00000 movcc r0, #0
c0997208: e320f014 csdb
c099720c: e3a03000 mov r3, #0
c0997210: e92d481d push {r0, r2, r3, r4, fp, lr}
c0997214: e1a0b00d mov fp, sp
c0997218: e2522004 subs r2, r2, #4
the value for R11 recovered from the previous frame (__irq_svc) will be
a snapshot of its value before the exception was taken (0x0002b000),
which occurred at address __copy_to_user_std+0x20 (0xc0997210), when R11
had not been assigned its value yet.
This means we can never assume that the SP values recovered from the
stack or from the frame pointer are ever safe to use, given the need to
do asynchronous unwinding, and the only robust approach is to revert to
the previous approach, which is to derive bounds for SP based on the
initial value, and never update them.
We can make an exception, though: now that the IRQ stack switch is
guaranteed to occur in call_with_stack(), we can implement a special
case for this function, and use a different set of bounds based on the
knowledge that it will always unwind from R11 rather than SP. As
call_with_stack() is a hand-rolled assembly routine, this is guaranteed
to remain that way.
So let's do a partial revert of b6506981f880, and drop all manipulations
for sp_low and sp_high based on the information collected during the
unwind itself. To support call_with_stack(), set sp_low and sp_high
explicitly to values derived from R11 when we unwind that function.
The only downside is that, while unwinding an overflow of the vmap'ed
stack will work fine as before, we will no longer be able to produce a
backtrace that unwinds the overflow stack itself across the exception
that was raised due to the faulting access to the guard region. However,
this only affects exceptions caused by problems in the stack overflow
handling code itself, in which case the remaining backtrace is not that
relevant.
Fixes: b6506981f880 ("ARM: unwind: support unwinding across multiple stacks")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
After simplifying the stack switch code in the IRQ exception handler by
deferring the actual stack switch to call_with_stack(), we no longer
need to special case the way we dump the exception stack, since it will
always be at the top of whichever stack was active when the exception
was taken.
So revert this special handling for the ARM unwinder.
This reverts commit 4ab6827081c63b83011a18d8e27f621ed34b1194.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The IRQ stacks series made some changes to the unwinder, to permit
unwinding across different stacks. This is needed because otherwise, the
call stack would terminate at the point where the stack switch between
the task stack and the IRQ stack occurs, which would defeat any
diagnostics that rely on timer interrupts, such as RCU stall detection.
Unfortunately, getting the unwind annotations correct turns out to be
difficult, given that this now involves a frame pointer which needs to
point into the right location in the task stack when unwinding from the
IRQ stack. Getting this wrong for an exception handling routine results
in the stack pointer to be unwound from the wrong location, causing any
subsequent unwind attempts to cause all kinds of issues, as reported by
Naresh here [0].
So let's simplify this, by deferring the stack switch to
call_with_stack(), which already has the correct unwind annotations, and
removing all the complicated handling of the stack frame from the IRQ
exception entrypoint itself.
[0] https://lore.kernel.org/all/CA+G9fYtpy8VgK+ag6OsA9TDrwi5YGU4hu7GM8xwpO7v6LrCD4Q@mail.gmail.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
When e.g. a WARN_ON() is encountered, we attempt to unwind the current
thread. To do this, we set frame.pc to unwind_backtrace, which means it
points at the beginning of the function. However, the rest of the state
is initialised from within the function, which means the function
prologue has already been run.
This can be confusing, and with a recent patch from Ard, can result in
the unwinder misbehaving if we want to be strict about the PC value.
If we correctly initialise the state so it is self-consistent (in other
words, set frame.pc to the location we are initialising it) then we
eliminate this confusion, and avoid possible future issues.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h.
While doing that rename tracehook_notify_resume to resume_user_mode_work.
Update all of the places that included tracehook.h for these functions to
include resume_user_mode.h instead.
Update all of the callers of tracehook_notify_resume to call
resume_user_mode_work.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Rename tracehook_report_syscall_{entry,exit} to
ptrace_report_syscall_{entry,exit} and place them in ptrace.h
There is no longer any generic tracehook infractructure so make
these ptrace specific functions ptrace specific.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Make the arm and arm64 code more concise and less confusing by
renaming the architecture specific tracehook_report_syscall to
report_syscall.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
It was missing a semicolon.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 25875aa71dfe ("ARM: include unprivileged BPF status in Spectre V2 reporting").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ARM spectre fixes from Russell King:
"ARM Spectre BHB mitigations.
These patches add Spectre BHB migitations for the following Arm CPUs
to the 32-bit ARM kernels:
- Cortex A15
- Cortex A57
- Cortex A72
- Cortex A73
- Cortex A75
- Brahma B15
for CVE-2022-23960"
* tag 'for-linus-bhb' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: include unprivileged BPF status in Spectre V2 reporting
ARM: Spectre-BHB workaround
ARM: use LOADADDR() to get load address of sections
ARM: early traps initialisation
ARM: report Spectre v2 status through sysfs
|
|
The mitigations for Spectre-BHB are only applied when an exception
is taken, but when unprivileged BPF is enabled, userspace can
load BPF programs that can be used to exploit the problem.
When unprivileged BPF is enabled, report the vulnerable status via
the spectre_v2 sysfs file.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Commit 41918ec82eb6 ("ARM: ftrace: enable the graph tracer with the EABI
unwinder") removed the dummy version of return_address() that was
provided for the CONFIG_ARM_UNWIND=y case, on the assumption that the
removal of the kernel_text_address() call from unwind_frame() in the
preceding patch made it safe to do so.
However, this turns out not to be the case: Corentin reports warnings
about suspicious RCU usage and other strange behavior that seems to
originate in the stack unwinding that occurs in return_address().
Given that the function graph tracer (which is what these changes were
enabling for CONFIG_ARM_UNWIND=y builds) does not appear to care about
this distinction, let's revert return_address() to the old state.
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Fixes: 41918ec82eb6 ("ARM: ftrace: enable the graph tracer with the EABI unwinder")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Corentin reports that since commit 538b9265c063 ("ARM: unwind: track
location of LR value in stack frame"), numerous spurious warnings are
emitted into the kernel log:
[ 0.000000] unwind: Index not found c0f0c440
[ 0.000000] unwind: Index not found 00000000
[ 0.000000] unwind: Index not found c0f0c440
[ 0.000000] unwind: Index not found 00000000
This is due to the fact that the commit in question removes a check
whether the PC value in the unwound frame is actually a kernel text
address, on the assumption that such an address will not be associated
with valid unwind data to begin with, which is checked right after.
The reason for removing this check was that unwind_frame() will be
called by the ftrace graph tracer code, which means that it can no
longer be safely instrumented itself, or any code that it calls, as it
could cause infinite recursion.
In order to prevent the spurious diagnostics, let's add back the call to
kernel_text_address(), but this time, only call it if no unwind data
could be found for the address in question. This is more efficient for
the common successful case, and should avoid any unintended recursion,
considering that kernel_text_address() will only be called if no unwind
data was found.
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Fixes: 538b9265c063 ("ARM: unwind: track location of LR value in stack frame")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Workaround the Spectre BHB issues for Cortex-A15, Cortex-A57,
Cortex-A72, Cortex-A73 and Cortex-A75. We also include Brahma B15 as
well to be safe, which is affected by Spectre V2 in the same ways as
Cortex-A15.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Provide a couple of helpers to copy the vectors and stubs, and also
to flush the copied vectors and stubs.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
As per other architectures, add support for reporting the Spectre
vulnerability status via sysfs CPU.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Pull ARM fixes from Russell King:
- Fix kgdb breakpoint for Thumb2
- Fix dependency for BITREVERSE kconfig
- Fix nommu early_params and __setup returns
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9182/1: mmu: fix returns from early_param() and __setup() functions
ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSE
ARM: Fix kgdb breakpoint for Thumb2
|
|
On some architectures, access_ok() does not do any argument type
checking, so replacing the definition with a generic one causes
a few warnings for harmless issues that were never caught before.
Fix the ones that I found either through my own test builds or
that were reported by the 0-day bot.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The kgdb code needs to register an undef hook for the Thumb UDF
instruction that will fault in order to be functional on Thumb2
platforms.
Reported-by: Johannes Stezenbach <js@sig21.net>
Tested-by: Johannes Stezenbach <js@sig21.net>
Fixes: 5cbad0ebf45c ("kgdb: support for ARCH=arm")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Enable the function graph tracer in combination with the EABI unwinder,
so that Thumb2 builds or Clang ARM builds can make use of it.
This involves using the unwinder to locate the return address of an
instrumented function on the stack, so that it can be overridden and
made to refer to the ftrace handling routines that need to be called at
function return.
Given that for these builds, it is not guaranteed that the value of the
link register is stored on the stack, fall back to the stack slot that
will be used by the ftrace exit code to restore LR in the instrumented
function's execution context.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The ftrace graph tracer needs to override the return address of an
instrumented function, in order to install a hook that gets invoked when
the function returns again.
Currently, we only support this when building for ARM using GCC with
frame pointers, as in this case, it is guaranteed that the function will
reload LR from [FP, #-4] in all cases, and we can simply pass that
address to the ftrace code.
In order to support this for configurations that rely on the EABI
unwinder, such as Thumb2 builds, make the unwinder keep track of the
address from which LR was unwound, permitting ftrace to make use of this
in a subsequent patch.
Drop the call to is_kernel_text_address(), which is problematic in terms
of ftrace recursion, given that it may be instrumented itself. The call
is redundant anyway, as no unwind directives will be found unless the PC
points to memory that is known to contain executable code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Fix the frame pointer handling in the function graph tracer entry and
exit code so we can enable HAVE_FUNCTION_GRAPH_FP_TEST. Instead of using
FP directly (which will have different values between the entry and exit
pieces of the function graph tracer), use the value of SP at entry and
exit, as we can derive the former value from the frame pointer.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Avoid explicit literal loads and instead, use accessor macros that
generate the optimal sequence depending on the architecture revision
being targeted.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Tweak the ftrace return paths to avoid redundant loads of SP, as well as
unnecessary clobbering of IP.
This also fixes the inconsistency of using MOV to perform a function
return, which is sub-optimal on recent micro-architectures but more
importantly, does not perform an interworking return, unlike compiler
generated function returns in Thumb2 builds.
Let's fix this by popping PC from the stack like most ordinary code
does.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Kernel images that are large in comparison to the range of a direct
branch may fail to work as expected with ftrace, as patching a direct
branch to one of the core ftrace routines may not be possible from the
.init.text section, if it is emitted too far away from the normal .text
section.
This is more likely to affect Thumb2 builds, given that its range is
only -/+ 16 MiB (as opposed to ARM which has -/+ 32 MiB), but may occur
in either ISA.
To work around this, add a couple of trampolines to .init.text and
swap these in when the ftrace patching code is operating on callers in
.init.text.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The compiler emitted hook used for ftrace consists of a PUSH {LR} to
preserve the link register, followed by a branch-and-link (BL) to
__gnu_mount_nc. Dynamic ftrace patches away the latter to turn the
combined sequence into a NOP, using a POP {LR} instruction.
This is not necessary, since the link register does not get clobbered in
this case, and simply adding #4 to the stack pointer is sufficient, and
avoids a memory access that may take a few cycles to resolve depending
on the micro-architecture.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Using ADR to take the address of 'ftrace_stub' via a local label
produces an address that has the Thumb bit cleared, which means the
subsequent comparison is guaranteed to fail. Instead, use the badr
macro, which forces the Thumb bit to be set.
Fixes: a3ba87a61499 ("ARM: 6316/1: ftrace: add Thumb-2 support")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Only SMP systems use the secondary startup path by definition, so there
is no need for SMP conditionals there.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Rework the vmalloc_seq handling so it can be used safely under SMP, as
we started using it to ensure that vmap'ed stacks are guaranteed to be
mapped by the active mm before switching to a task, and here we need to
ensure that changes to the page tables are visible to other CPUs when
they observe a change in the sequence count.
Since LPAE needs none of this, fold a check against it into the
vmalloc_seq counter check after breaking it out into a separate static
inline helper.
Given that vmap'ed stacks are now also supported on !SMP configurations,
let's drop the WARN() that could potentially now fire spuriously.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Avoid using R9 in the IRQ handler code, as the entry code uses it for
tsk, and expects it to remain untouched between the IRQ entry and exit
code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Use the SMP_ON_UP patching framework to elide HWCAP_TLS tests from the
context switch and return to userspace code paths, as SMP systems are
guaranteed to have this h/w capability.
At the same time, omit the update of __entry_task if the system is
detected to be UP at runtime, as in that case, the value is never used.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Nathan reports the group relocations go out of range in pathological
cases such as allyesconfig kernels, which have little chance of actually
booting but are still used in validation.
So add a Kconfig symbol for this feature, and make it depend on
!COMPILE_TEST.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
When onlining a CPU, switch to swapper_pg_dir as soon as possible so
that it is guaranteed that the vmap'ed stack is mapped before it is
used.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
