summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/mach-pca100.c
AgeCommit message (Collapse)Author
2016-09-20ARM: imx legacy: pca100: move peripheral initialization to .init_lateVladimir Zapolskiy
The change moves some of peripheral registrations and initializations (all peripherals dependent on GPIOs) from .init_machine to .init_late level, this allows to safely shift the shared GPIO controller driver initialization level after init level of i.MX IOMUXC driver. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2014-07-18ARM: imx: move EHCI platform defines out of platform_data headerShawn Guo
The platform_data header usb-ehci-mxc.h has a lot of stuff used by only IMX platform code. They shouldn't be really in this header but a IMX platform local header. Create ehci.h and move these stuff into it. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-12ARM: i.MX: Setup IRQ handler from IRQ driverAlexander Shiyan
This patch moves IRQ handler setup to the its corresponded IRQ driver (AVIC, TZIC). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-12ARM: i.MX27 pca100: remove deprecated IRQF_DISABLEDJuan Solano
This flag is a NOOP and can be removed now. Signed-off-by: Juan Solano <jsm@jsolano.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2013-12-19treewide: Fix typos in printkMasanari Iida
Correct spelling typo in various part of kernel Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-30misc: (at24) move header to linux/platform_data/Vivien Didelot
This patch moves the at24.h header from include/linux/i2c to include/linux/platform_data and updates existing support accordingly. It also fixes the following checkpatch warning: WARNING: please, no space before tabs #436: FILE: include/linux/platform_data/at24.h:31: + * ^Iu8 *mac_addr = ethernet_pdata->mac_addr;$ Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-06-17ARM: imx: Remove mxc specific ulpi access opsMarkus Pargmann
There are ulpi access ops implemented in drivers/usb/phy/phy-ulpi.c. mxc access ops implement the same access operations within mach-imx. This patch removes the mxc ulpi file and uses phy-ulpi instead for imx_otg_ulpi_create. phy-ulpi successfully tested with i.MX27 Phytec phyCARD-S (pca100). Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-24ARM: delete struct sys_timerStephen Warren
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-15ARM: imx: include hardware.h rather than mach/hardware.hShawn Guo
It moves a bunch of header files included in hardware.h and itself from mach-imx/include/mach to mach-imx, and updates users to include hardware.h rather than mach/hardware.h. The files in mach-imx/devices will need to include "../hardware.h". Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-15ARM: imx: include ulpi.h rather than mach/ulpi.hShawn Guo
Rename mach-imx/include/mach/ulpi.h to mach-imx/ulpi.h, and update users to include ulpi.h rather than mach/ulpi.h. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-15ARM: imx: include common.h rather than mach/common.hShawn Guo
Rename mach-imx/include/mach/common.h to mach-imx/common.h and update all users to include common.h rather than mach/common.h. It also removes an unneeded inclusion to common.h in mach-imx/devices/devices.c. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-15ARM: imx: move iomux drivers and headers into mach-imxShawn Guo
The board files in mach-imx are the only users of iomux drivers and headers. Move them into mach-imx from plat-mxc. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-07-23Merge tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc sparse IRQ conversion from Arnd Bergmann: "The I.MX platform is getting converted to use sparse IRQs. We are doing this for all platforms over time, because this is one of the requirements for building a multiplatform kernel, and generally a good idea." * tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx: select USE_OF ARM: imx: Fix build error due to missing irqs.h include ARM: imx: enable SPARSE_IRQ for imx platform ARM: fiq: change FIQ_START to a variable tty: serial: imx: remove the use of MXC_INTERNAL_IRQS ARM: imx: remove unneeded mach/irq.h inclusion i2c: imx: remove unneeded mach/irqs.h inclusion ARM: imx: add a legacy irqdomain for mx31ads ARM: imx: add a legacy irqdomain for 3ds_debugboard ARM: imx: pass gpio than irq number into mxc_expio_init ARM: imx: leave irq_base of wm8350_platform_data uninitialized dma: ipu: remove the use of ipu_platform_data ARM: imx: move irq_domain_add_legacy call into avic driver ARM: imx: move irq_domain_add_legacy call into tzic driver gpio/mxc: move irq_domain_add_legacy call into gpio driver ARM: imx: eliminate macro IRQ_GPIOx() ARM: imx: eliminate macro IOMUX_TO_IRQ() ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()
2012-07-06ARM: imx: remove unused pdata from device macrosBenoît Thébaudeau
Many imx device macros have a meaningless pdata. This patch removes those. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-01ARM: imx: remove unneeded mach/irq.h inclusionShawn Guo
Remove unneeded mach/irq.h inclusion from imx platform code. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-07-01ARM: imx: eliminate macro IRQ_GPIOx()Shawn Guo
This patch changes all the static gpio irq number assigning with IRQ_GPIOA() ... IRQ_GPIOF() to run-time assigning with gpio_to_irq call, and in turn eliminates these macros. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-06-13ARM: imx: cleanup otg_modeBenoît Thébaudeau
Cleanup the code for the otg_mode command line param: * Use the bool type as it applies here. * Qualify otg_mode_host with __initdata since this variable is only used in this context. * The __setup functions are not supposed to return a status code, but a boolean indicating whether the param has been handled. See obsolete_checksetup() in init/main.c. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-03-06ASoC: imx: move phycore audmux call into ASoC machine driverShawn Guo
It moves phycore audmux configuration call from board file into ASoC machine driver phycore-ac97 to ease converting audmux into a platform driver later. It moves phycore audmux configuration call from board file into ASoC machine driver phycore-ac97, so that it gets aligned with wm1133-ev1 and mx27vis-aic32x4, and more importantly it will ease the moving of audmux into sound/soc/imx as a platform driver later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-05ARM: restart: mxc: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-01Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits) ARM: tegra: update defconfig arm/tegra: Harmony: Configure PMC for low-level interrupts arm/tegra: device tree support for ventana board arm/tegra: add support for ventana pinmuxing arm/tegra: prepare Seaboard pinmux code for derived boards arm/tegra: pinmux: ioremap registers gpio/tegra: Convert to a platform device arm/tegra: Convert pinmux driver to a platform device arm/dt: Tegra: Add pinmux node to tegra20.dtsi arm/tegra: Prep boards for gpio/pinmux conversion to pdevs ARM: mx5: fix clock usage for suspend ARM i.MX entry-macro.S: remove now unused code ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER ARM i.MX tzic: add handle_irq function ARM i.MX avic: add handle_irq function ARM: mx25: Add the missing IIM base definition ARM i.MX avic: convert to use generic irq chip mx31moboard: Add poweroff support ARM: mach-qong: Add watchdog support ARM: davinci: AM18x: Add wl1271/wlan support ... Fix up conflicts in: arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-mx5/devices-imx53.h arch/arm/plat-mxc/include/mach/memory.h
2011-09-26ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLERSascha Hauer
Also, add handle_irq callbacks to machine descriptors. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-21ARM: mach-imx: convert boot_params to atag_offsetNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-06-06gpio/mxc: Change gpio-mxc into an upstanding gpio driverShawn Guo
The patch makes necessary changes on gpio-mxc as below to turn it into an upstanding gpio driver. * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Change mxc_gpio_init into mxc_gpio_probe function * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to be public at all, and also make some other cleanup on plat-mxc/include/mach/gpio.h at the same time And the patch then migrates mach-imx and mach-mx5 to the updated driver by adding corresponding platform devices. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-19ARM: imx: remove #includes already available from devices-common.hUwe Kleine-König
Most machine files include "devices-imxXX.h" which in turn includes <mach/devices-common.h>. The latter already includes many headers that the machine files don't need to include again. These were found by: $ grep \#include arch/arm/plat-mxc/include/mach/devices-common.h > tmpfile $ git grep -l 'devices-imx' arch/arm | xargs grep -f tmpfile -F (but I kept linux/init.h, linux/kernel.h and linux/platform_device.h) LAKML-Reference: 1298912674-15153-2-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceiversSascha Hauer
The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops, both are only present if CONFIG_USB_ULPI is set. To remove the need of ifdefs in the board code introduce a imx_otg_ulpi_create functions which expands to a static inline function if compiled without ulpi. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11ARM i.MX ehci: do ehci init in board specific functionsSascha Hauer
The mxc-ehci driver calls SoC specific phy initialization right after calling board specific initialization. To offer greater flexibility for boards to setup the phy and to get rid of some unnecessary flags in platform data this patch lets the boards call the SoC specific phy initialization and remove it from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: imx: use .init_early to initialize cpu type and reset addressUwe Kleine-König
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX27 pca100: remove unnecessary CONFIG_SPI_IMX ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-17ARM: imx: remove now empty devices.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate fsl-usb2-udc devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mxc-ehci devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically register mxc-mmc devicesUwe Kleine-König
... plus a trivial simplification of mx21ads_sdhc_init() Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically register imx-fb devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate imx2-wdt devicesUwe Kleine-König
Currently there is no platform data used in the driver. In case this changes and for consistency NULL is passed unused to the soc specific functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mxc_w1 devicesUwe Kleine-König
Currently there is no platform data used in the driver. In case this changes NULL is passed unused to the soc specific functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-11ARM: imx: dynamically register fec devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx/pca100: only specify i2c device type onceUwe Kleine-König
The first argument to I2C_BOARD_INFO is used to assign .type, so it should not be specified a second time. For the rtc-pcf8563/pcf8563 entry gcc preferred pcf8563, so did I. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: make all pin lists const and signed, move to .init where possibleUwe Kleine-König
Making the lists signed fixes sparse warnings like: arch/arm/mach-imx/mach-mx27_3ds.c:94:31: warning: incorrect type in argument 1 (different signedness) arch/arm/mach-imx/mach-mx27_3ds.c:94:31: expected int const *pin_list arch/arm/mach-imx/mach-mx27_3ds.c:94:31: got unsigned int static [toplevel] *<noident> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: fix name of macros to add imx-i2c devicesUwe Kleine-König
This is a follow up to c698715 (ARM: imx: dynamically register imx-i2c devices (imx27)) 2b92084 (ARM: imx: dynamically register imx-i2c devices (imx21)) 6348e6b (ARM: imx: dynamically register imx-i2c devices (imx1)) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-09-27ARM: imx: dynamically allocate imx-ssi devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-08-23ARM: imx: fix build failure concerning otg/ulpiUwe Kleine-König
The build failure was introduced by 13dd0c9 (USB: otg/ulpi: extend the generic ulpi driver.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10ARM: 6322/1: imx/pca100: Fix name of spi platform dataUwe Kleine-König
Commit 7536cf9 (ARM: imx: dynamically register spi_imx devices (imx27)) introduced a variable named "pca100_spi0_data" but passed "&pca100_spi_0_data" to imx27_add_spi_imx0. This wasn't noticed earlier because both SPI_IMX and MACH_PCA100 are not enabled in mx27_defconfig. This fixes a build failure: arch/arm/mach-imx/mach-pca100.c: In function 'pca100_init': arch/arm/mach-imx/mach-pca100.c:411: error: 'pca100_spi_0_data' undeclared (first use in this function) arch/arm/mach-imx/mach-pca100.c:411: error: (Each undeclared identifier is reported only once arch/arm/mach-imx/mach-pca100.c:411: error: for each function it appears in.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Uwe Kleine-König
into HEAD There are some more conflicts than detected by git, namely support for the newly added cpuimx machines needed to be converted to dynamic device registration. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Conflicts: arch/arm/mach-imx/Makefile arch/arm/mach-imx/devices.c arch/arm/mach-imx/devices.h arch/arm/mach-imx/eukrea_mbimx27-baseboard.c arch/arm/mach-mx2/Kconfig arch/arm/mach-mx25/Makefile arch/arm/mach-mx25/devices.c arch/arm/plat-mxc/include/mach/mx25.h arch/arm/plat-mxc/include/mach/mxc_nand.h
2010-06-30ARM: imx: dynamically register imx-uart devices (imx27)Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register spi_imx devices (imx27)Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register imx-i2c devices (imx27)Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: Change the way nand devices are registered (imx27)Uwe Kleine-König
Make use of new mechanism to register a nand device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: rename mxc_uart_devicex to follow a common naming schemeUwe Kleine-König
Addionally remove an unneeded include. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: imx: rename mach dir for mx21 and mx27 to mach-imxUwe Kleine-König
Finally all imx code should end up there, start with mach-mx2. While touching all files rename some files to use a hyphen instead of an underscore. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>