summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/pm-imx6.c
AgeCommit message (Collapse)Author
2017-06-07ARM: imx6ull: Make suspend/resume work like on 6ulLeonard Crestez
Suspend and resume on imx6ull is currenty not working because of some missed checks where behavior should match imx6ul. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-02-28ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbolFlorian Fainelli
All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-10-07Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - We get support for running in big-endian mode on two platforms: sunxi (Allwinner) and s3c24xx (old Samsung). - The recently added Uniphier platform now uses standard PSCI methods for SMP booting and we remove support for old bootloader versions that did not support it yet. - In sunxi, we gain support for the "Nextthing GR8" SoC, which is a close relative of the Allwinner A13 and R8 chips. - PXA completes its move over to the generic dmaengine framework and removes its old private API - mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC with integrated 802.11ac wireless networking" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: imx legacy: pca100: move peripheral initialization to .init_late ARM: imx legacy: mx27ads: move peripheral initialization to .init_late ARM: imx legacy: mx21ads: move peripheral initialization to .init_late ARM: imx legacy: pcm043: move peripheral initialization to .init_late ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late ARM: imx legacy: vpr200: move peripheral initialization to .init_late ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late ARM: imx legacy: qong: move peripheral initialization to .init_late ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late ARM: imx legacy: pcm037: move peripheral initialization to .init_late ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late ARM: imx legacy: mx31ads: move peripheral initialization to .init_late ARM: imx legacy: mx31lite: move peripheral initialization to .init_late ARM: imx legacy: kzm: move peripheral initialization to .init_late MAINTAINERS: update list of Oxnas maintainers ARM: orion5x: remove extraneous NO_IRQ ARM: orion: simplify orion_ge00_switch_init ...
2016-08-30ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sxAnson Huang
i.MX6SX has bypass PMIC ready function, as this function is normally NOT enabled on the board design, so we need to bypass the PMIC ready pin check during DSM mode resume flow, otherwise, the internal DSM resume logic will be waiting for this signal to be ready forever and cause resume fail. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Fixes: ff843d621bfc ("ARM: imx: add suspend support for i.mx6sx") Cc: <stable@vger.kernel.org> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-29ARM: imx: rename imx6q_set_int_mem_clk_lpm() functionAnson Huang
Let's rename the function imx6q_set_int_mem_clk_lpm() to imx6_set_int_mem_clk_lpm() since it's actually common for all i.MX6 SoCs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-15ARM: imx6: add missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ulPeter Chen
There is a missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ul, without it, the "standby" mode can't work well, the system can't be resumed. With this commit, the "standby" mode works well. Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Anson Huang <anson.huang@nxp.com> Cc: <stable@vger.kernel.org> Fixes: ee4a5f838c84 ("ARM: imx: add suspend/resume support for i.mx6ul") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-01-28ARM: imx6: fix cleanup path in imx6q_suspend_init()Jean-Christophe Dubois
The wrong pointer is passed to the ioumap function in the cleanup path Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-09-17ARM: imx: add suspend/resume support for i.mx6ulAnson Huang
This patch adds suspend function for i.MX6UL, it supports "standby" and "mem" mode, for "standby" mode, SoC will enter STOP mode only, while for "mem" mode, SoC will enter STOP mode and DDR IO will be set to low power mode. As i.MX6UL contains a "Cortex-A7" ARM core which has no PL310, so we need to avoid any PL310 operations during suspend/resume, also, we need to flush Cortex-A7's inernal L2 cache before suspend. Signed-off-by: Anson Huang <b20788@freescale.com>
2015-09-04genalloc: add name arg to gen_pool_get() and devm_gen_pool_create()Vladimir Zapolskiy
This change modifies gen_pool_get() and devm_gen_pool_create() client interfaces adding one more argument "name" of a gen_pool object. Due to implementation gen_pool_get() is capable to retrieve only one gen_pool associated with a device even if multiple gen_pools are created, fortunately right at the moment it is sufficient for the clients, hence provide NULL as a valid argument on both producer devm_gen_pool_create() and consumer gen_pool_get() sides. Because only one created gen_pool per device is addressable, explicitly add a restriction to devm_gen_pool_create() to create only one gen_pool per device, this implies two possible error codes returned by the function, account it on client side (only misc/sram). This completes client side changes related to genalloc updates. [akpm@linux-foundation.org: gen_pool_get() cleanup] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30genalloc: rename dev_get_gen_pool() to gen_pool_get()Vladimir Zapolskiy
To be consistent with other genalloc interface namings, rename dev_get_gen_pool() to gen_pool_get(). The original omitted "dev_" prefix is removed, since it points to argument type of the function, and so it does not bring any useful information. [akpm@linux-foundation.org: update arch/arm/mach-socfpga/pm.c] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Mark Brown <broonie@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alan Tull <atull@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-03ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlierShawn Guo
Commit 4631960d26da ("ARM: imx6: set initial power mode in pm function") moves imx6_set_lpm() from clock init function into imx6_pm_common_init(). This causes a hang when cpuidle support is enabled. The reason for that is ARM core clock is shut down unexpectedly by WAIT mode. It happens with the following call stack: cpuidle_register_governor() cpuidle_switch_governor() cpuidle_uninstall_idle_handler() synchronize_sched() wait_rcu_gp() wait_for_completion() When wait_for_completion() is called as above, all cores are idle/WFI. Hence, the reset value of CCM_CLPCR_LPM - WAIT mode, will trigger a hardware shutdown of the ARM core clock. To fix the regression, we need to ensure that CCM_CLPCR_LPM is initialized into RUN mode earlier than cpuidle governor registration, which is a postcore_initcall. This patch creates function imx6_pm_ccm_init() to map CCM block and initialize CCM_CLPCR_LPM into RUN mode, and have the function called from machine .init_irq hook, which should be early enough. Reported-by: Kevin Hilman <khilman@kernel.org> Fixes: 8fb76a07e2cb ("ARM: imx6: set initial power mode in pm function") Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx6: let pm code map CCM block on its ownShawn Guo
We are about to move imx6 clock driver into drivers/clk, so let's get imx6 pm code map CCM block on its own rather than relying on clock driver to do the mapping. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx6: set initial power mode in pm functionShawn Guo
Rather than setting initial low-power mode in every single i.MX6 clock initialization function, we should really do that in pm code. Let's move imx6q_set_lpm(WAIT_CLOCKED) call into imx6_pm_common_init(). While at it, let's rename the function to imx6_set_lpm() since it's actually common for all i.MX6 SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30ARM: imx6: convert GPC to stacked domainsMarc Zyngier
IMX6 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the fact that the GPC block is actually the first interrupt controller in the chain, kernels with this patch applied wont have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-01-05ARM: imx: support arm power off in cpuidle for i.mx6sxAnson Huang
This patch introduces an independent cpuidle driver for i.MX6SX, and supports arm power off in idle, totally 3 levels of cpuidle are supported as below: 1. ARM WFI; 2. SOC in WAIT mode; 3. SOC in WAIT mode + ARM power off. ARM power off can save at least 5mW power. This patch also replaces imx6q_enable_rbc with imx6_enable_rbc. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-01-05ARM: imx: remove unnecessary setting for DSMAnson Huang
Now we support DSM in OCRAM for all i.MX6 SoCs, the resume entry point is set in asm code of suspend-imx6.S, so no need to set the resume entry point for SRC in pre-suspend flow. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-12-09Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support, notable changes include: - bcm: brcmstb SMP support initial iproc/cygnus support - exynos: Exynos4415 SoC support PMU and suspend support for Exynos5420 PMU support for Exynos3250 pm related maintenance - imx: new LS1021A SoC support vybrid 610 global timer support - integrator: convert to using multiplatform configuration - mediatek: earlyprintk support for mt8127/mt8135 - meson: meson8 soc and l2 cache controller support - mvebu: Armada 38x CPU hotplug support drop support for prerelease Armada 375 Z1 stepping extended suspend support, now works on Armada 370/XP - omap: hwmod related maintenance prcm cleanup - pxa: initial pxa27x DT handling - rockchip: SMP support for rk3288 add cpu frequency scaling support - shmobile: r8a7740 power domain support various small restart, timer, pci apmu changes - sunxi: Allwinner A80 (sun9i) earlyprintk support - ux500: power domain support Overall, a significant chunk of changes, coming mostly from the usual suspects: omap, shmobile, samsung and mvebu, all of which already contain a lot of platform specific code in arch/arm" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits) ARM: mvebu: use the cpufreq-dt platform_data for independent clocks soc: integrator: Add terminating entry for integrator_cm_match ARM: mvebu: add SDRAM controller description for Armada XP ARM: mvebu: adjust mbus controller description on Armada 370/XP ARM: mvebu: add suspend/resume DT information for Armada XP GP ARM: mvebu: synchronize secondary CPU clocks on resume ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume ARM: mvebu: Armada XP GP specific suspend/resume code ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume ARM: mvebu: implement suspend/resume support for Armada XP clk: mvebu: add suspend/resume for gatable clocks bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration bus: mvebu-mbus: suspend/resume support clocksource: time-armada-370-xp: add suspend/resume support irqchip: armada-370-xp: Add suspend/resume support ARM: add lolevel debug support for asm9260 ARM: add mach-asm9260 ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf power: reset: imx-snvs-poweroff: add power off driver for i.mx6 ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A ...
2014-12-04ARM: imx6: fix bogus use of irq_get_irq_dataMarc Zyngier
The imx6 PM code seems to be quite creative in its use of irq_data, using something that is very much a hardware interrupt number where we expect a virtual one. Yes, it worked so far, but that's only luck, and it will definitely explode in 3.19. Fix it by using a pair of helper functions that deal with the actual hardware. Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-23ARM: imx: replace cpu type check with ddr type checkAnson Huang
As the DDR/IO and MMDC setting are different on LPDDR2 and DDR3, we used cpu type to decide how to do these settings in suspend before which is NOT flexible, take i.MX6SL for example, although it has LPDDR2 on EVK board, but users can also use DDR3 on other boards, so it is better to read the DDR type from MMDC then decide how to do related settings. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: add standby mode support for suspendAnson Huang
Add standby mode support for suspend, to enter standby mode: echo standby > /sys/power/state; Use UART or RTC alarm to wake up system, when system enters standby mode, SOC will enter STOP mode with ARM core kept power on and 24M XTAL on. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: mem bit must be cleared before entering DSM modeAnson Huang
According to hardware design, mem bit must be clear before entering DSM mode, as ARM core will be power gated in DSM mode. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: add suspend support for i.mx6sxAnson Huang
Add suspend support for i.MX6SX. To enter suspend, echo mem > /sys/power/state. To exit suspend, using RTC alarm or enable debug UART wakeup. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-05Merge tag 'soc-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "Lots of changes specific to one of the SoC families. Some that stick out are: - mach-qcom gains new features, most importantly SMP support for the newer chips (Stephen Boyd, Rohit Vaswani) - mvebu gains support for three new SoCs: Armada 375, 380 and 385 (Thomas Petazzoni and Free-electrons team) - SMP support for Rockchips (Heiko Stübner) - Lots of i.MX changes (Shawn Guo) - Added support for BCM5301x SoC (Hauke Mehrtens) - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn and Sebastian Hesselbarth doing the final part of a long journey) - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd Bergmann)" * tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits) ARM: sunxi: Select HAVE_ARM_ARCH_TIMER ARM: cache-tauros2: remove ARMv6 code ARM: mvebu: don't select CONFIG_NEON ARM: davinci: fix DT booting with default defconfig ARM: configs: bcm_defconfig: enable bcm590xx regulator support ARM: davinci: remove tnetv107x support MAINTAINERS: Update ARM STi maintainers ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE ARM: bcm21664: Add board support. ARM: sunxi: Add the new watchog compatibles to the reboot code ARM: enable ARM_HAS_SG_CHAIN for multiplatform ARM: davinci: remove da8xx_omapl_defconfig ARM: davinci: da8xx: fix multiple watchdog device registration ARM: davinci: add da8xx specific configs to davinci_all_defconfig ARM: davinci: enable da8xx build concurrently with older devices ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME ARM: shmobile: APMU: Fix warnings due to improper printk formats ...
2014-03-05ARM: imx6: rename pm-imx6q.c to pm-imx6.cShawn Guo
The pm-imx6q.c works for all i.MX6 SoCs, so let's rename it to pm-imx6.c and have the build controlled by option CONFIG_SOC_IMX6. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>