summaryrefslogtreecommitdiff
path: root/arch/arm/mach-integrator
AgeCommit message (Collapse)Author
2016-12-15Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - Added support for the TI DRA71x family of SoCs in mach-omap2, this is an new variant of the the DRA72x/DRA74x automotive infotainment chips we already supported for a while. - Added support for the ST STM32F746 SoC, the first Cortex-M7 based microcontroller we support, related to the smaller STM32F4 family. - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see http://elinux.org/RZ-G - SMP is now supported on the OX820 platform - A lot of code in mach-omap2 gets removed as a follow-up to removing support for board files in the previous release - Davinci has some new work to improve USB support - For i.MX, the performance monitor now supports profiling the memory controller using 'perf'" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits) ARM: davinci: da830-evm: use gpio descriptor for mmc pins ARM: davinci: da850-evm: use gpio descriptor for mmc pins ARM: davinci: hawk: use gpio descriptor for mmc pins ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6 ARM: davinci: da8xx: Fix ohci device name ARM: oxnas: Add OX820 config and makefile entry ARM: oxnas: Add OX820 SMP support ARM: davinci: PM: fix build when da850 not compiled in ARM: orion5x: remove legacy support of ls-chl ARM: integrator: drop EBI access use syscon ARM: BCM5301X: Add back handler ignoring external imprecise aborts ARM: davinci: PM: support da8xx DT platforms ARM: davinci: PM: cleanup: remove references to pdata ARM: davinci: PM: rework init, remove platform device ARM: Kconfig: Introduce MACH_STM32F746 flag ARM: mach-stm32: Add a new SOC - STM32F746 ARM: shmobile: document SK-RZG1E board ARM: shmobile: r8a7745: basic SoC support ARM: imx: mach-imx6ul: add imx6ull support ARM: zynq: Reserve correct amount of non-DMA RAM ...
2016-12-07gpio: pl061: move platform data into driverLinus Walleij
No boardfile defines any PL061 platform data anymore: the Integrator IM/PD-1 includes the file but is not making use of the struct. Let's delete the include and all references, then move the platform data into the driver for later consolidation into the driver state container. The only resource defined by the IM/PD-1 is the IRQ which is passed through the AMBA PrimeCell bus abstraction struct amba_device. Cc: arm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-17ARM: integrator: drop EBI access use sysconLinus Walleij
The EBI lookup is not longer in use: this has been moved to the NAND chip driver. The syscon node is better accessed indirectly using the regmap like the NAND chip driver does, so let's use the syscon to set the modem control signals RTS/CTS through the dedicated syscon register. We also migrate the decoder status "SC_DEC" register that enumerate the logic modules using syscon. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-07Merge tag 'armsoc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) ARM: dts: lpc32xx: add device node for IRAM on-chip memory ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes ...
2016-09-21ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantlyKishon Vijay Abraham I
*MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. Don't select it redundantly in all ARCH_MULTIPLATFORM based machines. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-08-31ARM: integrator: read counter using syscon/regmapLinus Walleij
Look up the core module base address from the device tree and register a sched_clock() using the regmap to the core module on the Integrator/CP. MFD_SYSCON is selected by the arch so it is always available. This further makes it possible to remove one more static map. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-31ARM: integrator: cut down on static mapsLinus Walleij
This removes all the unused static maps on the Integrator/AP and Integrator/CP and also take this opportunity to strip down a big list of unused #includes from each boardfile. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-31ARM: integrator: delete some auxdataLinus Walleij
There is just a few auxdata entries still needed on the Integrators: - UART RTS/CTS callbacks for Integrator/AP - MMC/SD special card detect quirk for Integrator/CP Delete the rest. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-31ARM: integrator: move CP CLCD display to DTSLinus Walleij
The Integrator/CP CLCD VGA display can now be registered fully from the device tree. Delete the board file code and add the display definition to the DTS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-02treewide: replace obsolete _refok by __refFabian Frederick
There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-01Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "The cleanup branch keeps going down in size as we've completed a lot of the major legacy platform removals and conversions. A handful of changes this time around, some of the themes or larger sets are: - A bunch of i.MX cleanups around platform detection, init call cleanups - Misc fixes of missing/implicit includes - Removal of ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) ARM: mps2: fix typo ARM: s3c64xx: avoid warning about 'struct device_node' bus: mvebu-mbus: make mvebu_mbus_syscore_ops static bus: mvebu-mbus: fix __iomem on register pointers ARM: tegra: Remove board_init_funcs array ARM: iop: Fix indentation ARM: imx: remove cpu_is_mx*() ARM: imx: remove last call to cpu_is_mx5* ARM: imx: rework mx27_pm_init() call ARM: imx: deconstruct mx3_idle ARM: imx: deconstruct mxc_rnga initialization ARM: imx: remove cpu_is_mx1 check ARM: i.MX: Do not explicitly call l2x0_of_init() ARM: i.MX: system.c: Tweak prefetch settings for performance ARM: i.MX: system.c: Replace magic numbers ARM: i.MX: system.c: Remove redundant errata 752271 code ARM: i.MX: system.c: Convert goto to if statement ARM: Kirkwood: fix kirkwood_pm_init() declaration/type ARM: Kirkwood: make kirkwood_disable_mbus_error_propagation() static ARM: orion5x: make orion5x_legacy_handle_irq static ...
2016-07-30Merge tag 'devicetree-for-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - remove most of_platform_populate() calls in arch code. Now the DT core code calls it in the default case and platforms only need to call it if they have special needs - use pr_fmt on all the DT core print statements - CoreSight binding doc improvements to block name descriptions - add dt_to_config script which can parse dts files and list corresponding kernel config options - fix memory leak hit with a PowerMac DT - correct a bunch of STMicro compatible strings to use the correct vendor prefix - fix DA9052 PMIC binding doc to match what is actually used in dts files * tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table" xtensa: Fix build error due to missing include file MIPS: ath79: Add missing include file Fix spelling errors in Documentation/devicetree ARM: dts: fix STMicroelectronics compatible strings powerpc/dts: fix STMicroelectronics compatible strings Documentation: dt: i2c: use correct STMicroelectronics vendor prefix scripts/dtc: dt_to_config - kernel config options for a devicetree of: fdt: mark unflattened tree as detached of: overlay: add resolver error prints coresight: document binding acronyms Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties of: use pr_fmt prefix for all console printing of/irq: Mark initialised interrupt controllers as populated of: fix memory leak related to safe_name() Revert "of/platform: export of_default_bus_match_table" of: unittest: use of_platform_default_populate() to populate default bus memory: omap-gpmc: use of_platform_default_populate() to populate default bus bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus ...
2016-06-28clocksource/drivers/integrator-ap: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_INTEGRATOR_AP_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-23arm: use of_platform_default_populate() to populateKefeng Wang
Use helper of_platform_default_populate() in linux/of_platform when possible, instead of calling of_platform_populate() with the default match table. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Roland Stigge <stigge@antcom.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Ray Jui <rjui@broadcom.com> Cc: Viresh Kumar <vireshk@kernel.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Rob Herring <robh@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-03ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-04ARM: integrator: move flash registration to device treeLinus Walleij
The flash on the Integrator was already defined by the device tree, but VPP control and flash protection was in the boardfiles. Simply add the compatible string "arm,versatile-flash" and the special add-on code for flash programming voltage and protection kicks in in the MTD layer. Remove the board file code and augment the device tree in one go for seamless transition. Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-08ARM: integrator: remove redundant select in KconfigMasahiro Yamada
All of these are already select'ed by ARCH_MULTIPLATFORM. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-08ARM: drop unused Makefile.boot of Multiplatform SoCsMasahiro Yamada
The variable "MACHINE" is empty if CONFIG_ARCH_MULTIPLATFORM=y, so these Makefile.boot files are never included. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com> (for Zynq) Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-18Merge branch 'treewide/cleanup' into next/multiplatformArnd Bergmann
The realview multiplatform series has a trivial conflict with one of the treewide cleanups, let's just merge that in to avoid having to resolve this later. * treewide/cleanup: ARM: use "depends on" for SoC configs instead of "if" after prompt ARM/clocksource: use automatic DT probing for ux500 PRCMU ARM: use const and __initconst for smp_operations ARM: hisi: do not export smp_operations structures Conflicts: arch/arm/mach-integrator/Kconfig
2015-12-18ARM: integrator: use explicit core module optionsArnd Bergmann
For consistency with the other platforms, this remove the CPU selection logic in mm/Kconfig that was only used by integrator, and adds specific options for each available core tile and core module, which in turn select the correct CPUs. This is consistent with the new way that we do it for realview and all other platforms. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01ARM: use "depends on" for SoC configs instead of "if" after promptMasahiro Yamada
Many ARM sub-architectures use prompts followed by "if" conditional, but it is wrong. Please notice the difference between config ARCH_FOO bool "Foo SoCs" if ARCH_MULTI_V7 and config ARCH_FOO bool "Foo SoCs" depends on ARCH_MULTI_V7 These two are *not* equivalent! In the former statement, it is not ARCH_FOO, but its prompt that depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO is selected by another, but ARCH_MULTI_V7 is still disabled. As it is not unmet dependency, Kconfig never warns. This is probably not what you want. The former should be used only when you need to do so, and you really understand what you are doing. (In most cases, it should be wrong!) For enabling/disabling sub-architectures, the latter is always correct. As a good side effect, this commit fixes some entries over 80 columns (mach-imx, mach-integrator, mach-mbevu). [Arnd: I note that there is not really a bug here, according to the discussion that followed, but I can see value in being consistent and in making the lines shorter] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jun Nie <jun.nie@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Halasa <khc@piap.pl> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-06-02ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusionSudeep Holla
The header asm/hardware/arm_timer.h is included in various machine specific files to access TIMER_CTRL and initialise to a known state. This patch introduces a new function sp804_timer_disable to disable the SP804 timers and uses the same for initialising the timers to known(off) state, thereby removing the dependency on the header asm/hardware/arm_timer.h This change is in prepartion to move sp804 timer support out of arch/arm so that it can be used on ARM64 platforms. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-29ARM: integrator: Convert PCI to use generic config accessorsRob Herring
Convert the integrator PCI driver to use the generic config access functions. This changes accesses from __raw_readX/__raw_writeX to readX/writeX variants. The spinlock is removed because it is unnecessary. The config read and write functions are already protected with a spinlock and no access can occur during the .pre_init function. [arnd: remove unused "flags"] Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> CC: Russell King <linux@arm.linux.org.uk> CC: linux-arm-kernel@lists.infradead.org
2014-11-13soc: move SoC driver for the ARM IntegratorLinus Walleij
This creates a new SoC bus driver for the ARM Integrator family core modules to register the SoC bus and provide sysfs info for the core module. We delete the corresponding code from the Integrator machine and select this driver to get a clean result. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-13ARM: integrator: move core module LED to device treeLinus Walleij
This gets rid of the custom LED driver in the Integrator directory altogether and switches us over to using the syscon LEDs for this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-13ARM: integrator: move debug LEDs to syscon LED driverLinus Walleij
The Integrator debug block is a simple set of registers, make it a syscon and register the four LEDs on the Integrator/AP baseboard as syscon LEDs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-13ARM: integrator: move restart to the device treeLinus Walleij
Using the augmented reset driver for the Versatile family, we can move the reset handling for the Integrator out of the machine. We add a "syscon" attribute to the core module, and access the syscon registers using this handle. We need to select SYSCON, POWER, POWER_RESET and POWER_RESET_VERSATILE in order for the restart functionality to always be available on all systems (it should not be optional). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-28ARM: integrator: move AP timer to clocksourceLinus Walleij
This moves the timer/clocksource implementation for the Integrator/AP down to drivers/clocksource and augments the driver a little to use CLOCKSOURCE_OF_DECLARE(). Remove the static mapping of the timer blocks while we're at it. Tested on the Integrator/AP. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-22ARM: integrator: make the Integrator multiplatformLinus Walleij
This converts the ARM Integrator reference designs to be fully multiplatform. V4T, V5 and V6 multiplatform builds become possible after this patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-09Merge tag 'pci-v3.18-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make <linux/aer.h> standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi
2014-09-30of/pci: Fix the conversion of IO ranges into IO resourcesLiviu Dudau
The ranges property for a host bridge controller in DT describes the mapping between the PCI bus address and the CPU physical address. The resources framework however expects that the IO resources start at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The conversion from PCI ranges to resources failed to take that into account, returning a CPU physical address instead of a port number. Also fix all the drivers that depend on the old behaviour by fetching the CPU physical address based on the port number where it is being needed. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Thierry Reding <thierry.reding@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Catalin Marinas <catalin.marinas@arm.com>
2014-08-19ARM: integrator: add MMCI device to IM-PD1Linus Walleij
The IM-PD1 logic module daughterboard holds an MMCI block, which we can now provide using platform resources such as proper GPIO lines etc. We add the GPIO table dynamically and using the new GPIO descriptor mechanism. Tested and hey, it works: root@integrator:/ mount /dev/mmcblk0p1 /mnt/ root@integrator:/ ls /mnt/ ARM U-BOOT.EXE u-boot.bin u-boot.srec u-pad.bin Reviewed-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-07-07Merge tag 'versatile-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/cleanup Merge "First pull request of Versatile family clean-ups for v3.17" from Linus Walleij: - Remove <mach/memory.h> from the Integrator, paving the road for multiplatform. - Push the CLCD helper code down into the framebuffer subsystem, removing the last hook in plat-versatile for the Integrator, also paving the road for multiplatform. Patches tested on Integrator/AP, Integrator/CP and Versatile AB (all real hardware). * tag 'versatile-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: video: move Versatile CLCD helpers ARM: integrator: get rid of <mach/memory.h> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-07Merge tag 'versatile-for-3.17' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next/soc Merge "DT IRQ and clock support for Versatile platforms" from Rob Herring. This branch moves IRQ and clock support over to DT for the versatile platforms. * tag 'versatile-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: clk: versatile: add versatile OSC support dts: versatile: add clock tree ARM: timer-sp: allow getting timer1 clock from DT to fallback to legacy clock dt/bindings: add compatible string for versatile osc clock dt/bindings: arm-boards: add binding for Versatile core module dts: versatile: add pl180 compatible strings ARM: versatile: remove init_irq hook for DT boot ARM: integrator: convert to use irqchip_init irqchip: versatile-fpga: add support for arm,versatile-sic irqchip: versatile-fpga: Add IRQCHIP_DECLARE support dts: versatile: add missing irq controller properties Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-27video: move Versatile CLCD helpersLinus Walleij
This moves the Versatile-specific helper code and panel database down into the drivers/video folder next to the CLCD driver itself, preserving the config symbol but also moving the header to platform data. This is necessary to rid the Integrator of this final <plat/*> inclusion dependency and get us one less user of the plat-versatile folder. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: linux-fbdev@vger.kernel.org Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-27ARM: integrator: get rid of <mach/memory.h>Linus Walleij
The Integrator has a custom <mach/memory.h> header defining the BUS_OFFSET for *_to_bus and bus_to_* operations as offset from 0x80000000. This switches the Integrator over to using the mechanism introduced for the Keystone to provide the same offset using the device tree, deletes <mach/memory.h> and augments the Integrator device tree to provide the bus offset. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-24ARM: integrator: convert to use irqchip_initRob Herring
Now that versatile-fpga irqchip has IRQCHIP_DECLARE support, the interrupt related initialization can be removed. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-24ARM: integrator: fix OF-related regressionLinus Walleij
Commit 07e461cd7e73a84f0e3757932b93cc80976fd749 "of: Ensure unique names without sacrificing determinism" caused a boot failure regression on the Integrator machines. The problem is probably caused by fiddling too much with the device tree population in the OF init function, such as passing the SoC bus device as parent when populating the device tree. This patch fixes the problem by: - Avoiding to explicitly look up the tree root - Look up devices needed before device population from the match only, passing NULL as root - Passing NULL as root and parent when calling of_platform_populate() After this the Integrators boot again. Tested on Integrator/AP and Integrator/CP. Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17ARM: integrator: fix section mismatch problemLinus Walleij
This addresses a section mismatch problem in the IM-PD1 driver in the Integrator/AP. The IM-PD1 contains a VIC interrupt controller and therefore the driver calls vic_init_cascaded() which is marked __init as irqchips are simply not hot-pluggable and specifically the VIC is assumed to initiate only on boot. However the module driver model of the Integrator LM bus assumes that logic tile drivers can be probed at runtime. This is not really the case for IM-PD1: these tiles are detected at boot and they cannot be plugged into a running system. Before this patch it is of course possible to modprobe them later. By first forcing the IM-PD1 to bool we make sure this driver gets compiled into the kernel, and we know it will be probed only at boot time when the tiles are detected, so we can tag its probe function __init_refok as we know it won't be called after boot now, and the section mismatch problem goes away. As a side effect, sysfs binding from userspace becomes impossible, so we tag the driver to suppress the bind/unbind sysfs attributes. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-05Merge tag 'tags/cleanup2-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-04-05Merge tag 'fixes-non-critical-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-critical bug fixes from Arnd Bergmann: "Lots of isolated bug fixes that were not found to be important enough to be submitted before the merge window or backported into stable kernels. The vast majority of these came out of Arnd's randconfig testing and just prevents running into build-time bugs in configurations that we do not care about in practice" * tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: at91: fix a typo ARM: moxart: fix CPU selection ARM: tegra: fix board DT pinmux setup ARM: nspire: Fix compiler warning IXP4xx: Fix DMA masks. Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation" IXP4xx: Fix Goramo Multilink GPIO conversion. Revert "ARM: ixp4xx: fix gpio rework" ARM: tegra: make debug_ll code build for ARMv6 ARM: sunxi: fix build for THUMB2_KERNEL ARM: exynos: add missing include of linux/module.h ARM: exynos: fix l2x0 saved regs handling ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK ARM: samsung: select ATAGS where necessary ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic ARM: samsung: allow serial driver to be disabled ARM: s5pv210: enable IDE support in MACH_TORBRECK ARM: s5p64x0: fix building with only one soc type ARM: s3c64xx: select power domains only when used ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1 ...
2014-03-21ARM: integrator: only select pl01x if TTY is enabledArnd Bergmann
Building the integrator platform without TTY support currently results in a build failure because we always turn on the pl010 or pl011 drivers. Changing this to a conditional 'select' statement enables us to build more random configurations, although it should have little impact for practical configurations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org>
2014-03-12ARM: 8000/1: misc: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch removes the use of the IRQF_DISABLED flag from miscellaneous code in mach-xxx and plat-xxx This flag is a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-26ARM: integrator: register sched_clock directlyLinus Walleij
The detour through plat-versatile/sched-clock.c is hard to migrate to multiplatform set-up and it's very little code being duplicated so let's just inline the sched_clock registration and cut one more dependency to plat-versatile. This also makes this sched_clock implementation compulsory. Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26ARM: integrator: localize the hardware.h headerLinus Walleij
As we move toward multiplatform support for the Integrator family we need to localize all <mach/*> headers. This moves the hardware.h header down to the machine folder. There are no users outside the machine in the kernel. Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26ARM: integrator: merge platform.h to hardware.hLinus Walleij
There is no need to have the two separate headers <mach/platform.h> and <mach/hardware.h>, especially since we are now going to make them local files. There is not one single driver outside the mach-integrator folder referencing any of the files. Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26ARM: integrator: localize the impd1.h headerLinus Walleij
As we move toward multiplatform support for the Integrator family we need to localize all <mach/*> headers. This moves the impd1.h header down to the machine folder, copying the the three defines only used by the clock driver down into the clock driver. Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>