summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
AgeCommit message (Collapse)Author
2017-09-12Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Low priority fixes and updates for ARM: - add some missing includes - efficiency improvements in system call entry code when tracing is enabled - ensure ARMv6+ is always built as EABI - export save_stack_trace_tsk() - fix fatal signal handling during mm fault - build translation table base address register from scratch - appropriately align the .data section to a word boundary where we rely on that data being word aligned" * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8691/1: Export save_stack_trace_tsk() ARM: 8692/1: mm: abort uaccess retries upon fatal signal ARM: 8690/1: lpae: build TTB control register value from scratch in v7_ttb_setup ARM: align .data section ARM: always enable AEABI for ARMv6+ ARM: avoid saving and restoring registers unnecessarily ARM: move PC value into r9 ARM: obtain thread info structure later ARM: use aliases for registers in entry-common ARM: 8689/1: scu: add missing errno include ARM: 8688/1: pm: add missing types include
2017-09-10Merge tag 'armsoc-platforms' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch contains platform updates for 32- and 64-bit ARM, including defconfig updates to enable new options, drivers and platforms. There are also a few fixes and cleanups for some existing vendors. Some of the things worth highlighting here are: - Enabling new crypt drivers on arm64 defconfig - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig - Debug support enabled for Renesas r8a7743 - Various config updates for Renesas platforms (sound, USB, other drivers) - Platform support (including SMP) for TI dra762 - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code" * tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: multi_v7_defconfig: make eSDHC driver built-in arm64: defconfig: enable rockchip graphics MAINTAINERS: Update Cavium ThunderX2 entry ARM: config: aspeed: Add I2C, VUART, LPC Snoop ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G ARM: s3c24xx: Fix NAND ECC mode for mini2440 board ARM: davinci_all_defconfig: enable tinydrm and ST7586 arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1 MAINTAINERS: update ARM/ZTE entry soc: versatile: remove unnecessary static in realview_soc_probe() ARM: Convert to using %pOF instead of full_name ARM: hisi: Fix typo in comment ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add recently added crypto drivers as modules arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG ...
2017-09-09Merge branches 'fixes' and 'misc' into for-linusRussell King
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
2017-09-05Merge branch 'next/cleanup' into next/socOlof Johansson
* next/cleanup: soc: versatile: remove unnecessary static in realview_soc_probe() ARM: Convert to using %pOF instead of full_name ARM: hisi: Fix typo in comment ARM: OMAP4+: PRM: fix of_irq_get() result checks ARM: OMAP3+: PRM: fix of_irq_get() result check ARM: dts: dra72-evm-revc: workaround incorrect DP83867 RX_CTRL pin strap ARM: dts: dra71-evm: workaround incorrect DP83867 RX_CTRL pin strap ARM: OMAP2+: omap_device: drop broken RPM status update from suspend_noirq bus: omap-ocp2scp: Fix error handling in omap_ocp2scp_probe
2017-09-04mfd: twl: Move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-24ARM: OMAP2+: fix missing variable declarationArnd Bergmann
The function that was added doesn't actually build: arch/arm/mach-omap2/display.c: In function 'omapdss_init_fbdev': arch/arm/mach-omap2/display.c:184:2: error: 'r' undeclared (first use in this function) This adds a declaration for 'r' to fix it. Fixes: 5ce783025c82 ("ARM: OMAP2+: Don't register omapdss device for omapdrm") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-19Merge tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Pull "non-urgent fixes for omaps for v4.14" from Tony Lindgren: Non-urgent fixes for omaps for v4.14 merge window. These all can wait for the merge window as we have not seemed to hit any of these so far: - Fix error handling in omap_ocp2scp_probe affecting runtime PM error path - Drop broken RPM status update for omap_device - Two fixes for of_irq_get() usage that can return 0 * tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4+: PRM: fix of_irq_get() result checks ARM: OMAP3+: PRM: fix of_irq_get() result check ARM: OMAP2+: omap_device: drop broken RPM status update from suspend_noirq bus: omap-ocp2scp: Fix error handling in omap_ocp2scp_probe
2017-08-16Merge tag 'omap-for-v4.14/soc-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "soc changes for omaps for v4.14" from Tony Lindgren: SoC updates for omaps for v4.14. Most of the chages are to add support for new dra762 SoC. The other changes are are for legacy DMA code removal, and MMC quirk and iodelay config for dra7. * tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: dra7: powerdomain data: Register SoC specific powerdomains ARM: dra762: Enable SMP for dra762 ARM: dra7: hwmod: Register dra76x specific hwmod ARM: dra762: Add support for device identification ARM: OMAP2+: board-generic: add support for dra762 family ARM: OMAP2+: Select PINCTRL_TI_IODELAY for SOC_DRA7XX ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM ARM: OMAP2+: Remove unused legacy code for DMA
2017-08-16ARM: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Russell King <linux@armlinux.org.uk> Cc: Kukjin Kim <kgene@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-16ARM: OMAP2+: Don't register omapdss device for omapdrmLaurent Pinchart
The omapdrm driver doesn't need the omapdss device anymore. Although it can't be removed completely as the fbdev driver still requires it, we can condition its registration to the usage of the omapfb driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-16ARM: OMAP2+: Remove unused omapdrm platform deviceLaurent Pinchart
The omapdrm platform device is unused, as a replacement is now registered in the omapdss driver. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15ARM: OMAP4+: PRM: fix of_irq_get() result checksSergei Shtylyov
of_irq_get() may return 0 as well as a nagative error number on failure, (and never on success), however omap44xx_prm_late_init() regards 0 as a valid IRQ -- fix this. Fixes: a8f83aefcd5a ("ARM: OMAP4+: PRM: register interrupt information from DT") Fixes: c5b3955828ba ("ARM: OMAP4: Fix legacy code clean-up regression") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-15ARM: OMAP3+: PRM: fix of_irq_get() result checkSergei Shtylyov
of_irq_get() may return 0 as well as a nagative error number on failure (and never on success), however omap3xxx_prm_late_init() regards 0 as a valid IRQ -- fix this. Fixes: 1e037794f7f ("ARM: OMAP3+: PRM: register interrupt information from DT") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-15ARM: OMAP2+: Register SoC device attributes from machine .init()Laurent Pinchart
SoC device attributes are registered with a call to soc_device_register() from the machine .init_late() operation, which is called from the late initcall, after all drivers built-in drivers have been probed. This results in the impossibility for drivers to use SoC device matching in their probe function. The omap_soc_device_init() function is safe to call from the machine .init() operation, as all data it depends on is initialized from the .init_early() operation. Move SoC device attribute registration to machine .init() like on all other ARM platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-14ARM: OMAP: dra7: powerdomain data: Register SoC specific powerdomainsLokesh Vutla
Custom efuse powerdomain is always on in dra72 ES2.0 and dra76 SoCs. So register it as aon for these SoCs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-14ARM: dra762: Enable SMP for dra762Lokesh Vutla
smp specific routines are called based on soc_is_*() api in omap-smc.c. Add soc_is_dra76x() to the condition so that smp specific routines are called for dra76 SoC. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-14ARM: dra7: hwmod: Register dra76x specific hwmodLokesh Vutla
Certain IPs are available on dra76 which are not present either in dra74 or dra72. So add provision to register dra76 specific IPs separately. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-14ARM: dra762: Add support for device identificationLokesh Vutla
Add ID code detection for dra762 SoC. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-14ARM: OMAP2+: board-generic: add support for dra762 familyLokesh Vutla
Adding board generic support for dra762 family. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-14ARM: align .data sectionRussell King
Robert Jarzmik reports that his PXA25x system fails to boot with 4.12, failing at __flush_whole_cache in arch/arm/mm/proc-xscale.S:215: 0xc0019e20 <+0>: ldr r1, [pc, #788] 0xc0019e24 <+4>: ldr r0, [r1] <== here with r1 containing 0xc06f82cd, which is the address of "clean_addr". Examination of the System.map shows: c06f22c8 D user_pmd_table c06f22cc d __warned.19178 c06f22cd d clean_addr indicating that a .data.unlikely section has appeared just before the .data section from proc-xscale.S. According to objdump -h, it appears that our assembly files default their .data alignment to 2**0, which is bad news if the preceding .data section size is not power-of-2 aligned at link time. Add the appropriate .align directives to all assembly files in arch/arm that are missing them where we require an appropriate alignment. Reported-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-08-10ARM: OMAP2+: Select PINCTRL_TI_IODELAY for SOC_DRA7XXKishon Vijay Abraham I
PINCTRL_TI_IODELAY should be enabled so that "pinctrl_dev" can be created for pinctrl entries populated with iodelay values in device tree data. Select PINCTRL_TI_IODELAY for SOC_DRA7XX here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-10ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVMSekhar Nori
DRA74x EVM Rev H EVM comes with revision 2.0 silicon. However, earlier versions of EVM can come with either revision 1.1 or revision 1.0 of silicon. The device-tree file is written to support rev 2.0 of silicon. pdata quirks are used to then override the settings needed for PG 1.1 silicon. PG 1.1 silicon has limitations w.r.t frequencies at which MMC1/2/3 can operate as well as different IOdelay numbers. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-10ARM: OMAP2+: Remove unused legacy code for DMATony Lindgren
We are now booting all mach-omap2 in device tree only mode. Any code that is only called in legacy boot mode where of_have_populated_dt() is not set is safe to remove now. Let's leave the dummy omap2_system_dma_init_dev() check in place for now to avoid a pointless merge conflict with tusb6010 dmaengine conversion as pointed out by Peter Ujfalusi <peter.ujfalusi@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-10ARM: OMAP2+: omap_device: drop broken RPM status update from suspend_noirqJohan Hovold
Since commit a8636c89648a ("PM / Runtime: Don't allow to suspend a device with an active child"), which went into 4.10, it is no longer permitted to set RPM_SUSPENDED state for a device with active children (unless power.ignore_children is set). This specifically means that the attempts to do just that from the omap pm-domain suspend_noirq callback have since been failing whenever a child is active, for example: am335x-usb-childs 47400000.usb: runtime PM trying to suspend device but active child Silence this warning by dropping the broken pm_runtime_set_suspended() call from the omap suspend_noirq callback along with the redundant pm_runtime_set_active() in resume_noirq. This effectively reverts commit 3522bf7bfa24 ("ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume"), which started updating the RPM state after the runtime_suspend callback (!) for active omap devices had been called during system suspend. The rationale was that a later pm_runtime_get_sync() would then fail (even after runtime pm had been disabled) and that this in turn would avoid any external aborts when accessing registers with clocks disabled. (See also commit 6f3c77b040fc ("PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2"). But during the suspend_noirq phase all children would already have been suspended and their drivers would specifically not attempt any further register accesses. And if this was all just a workaround for random device drivers doing cross-tree calls during system suspend, those drivers should be fixed and updated to explicitly model such dependencies using device-links instead (and either way, any such calls have been causing crashes since 4.10). Fixes: 3522bf7bfa24 ("ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume") Fixes: a8636c89648a ("PM / Runtime: Don't allow to suspend a device with an active child") Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Nishanth Menon <nm@ti.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Tony Lindgren <tony@atomide.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Johan Hovold <johan@kernel.org> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-04Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This comes a bit later than I planned, and as a consequence is a larger than it should be. Most of the changes are devicetree fixes, across lots of platforms: Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic Meson, Sigma Desings Tango, Allwinner SUNxi and TI Davinci. Also across many platforms, I applied an older series of simple randconfig build fixes. This includes making the CONFIG_MTD_XIP option compile again, which had been broken for many years and probably has not been missed, but it felt wrong to just remove it completely. The only other changes are: - We enable HWSPINLOCK in defconfig to get some Qualcomm boards to work out of the box. - A few regression fixes for Texas Instruments OMAP2+. - A boot regression fix for the Renesas regulator quirk. - A suspend/resume fix for Uniphier SoCs, fixing the resume of the system bus" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: dts: tango4: Request RGMII RX and TX clock delays bus: uniphier-system-bus: set up registers when resuming ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridge ARM: shmobile: rcar-gen2: Fix deadlock in regulator quirk arm64: defconfig: enable missing HWSPINLOCK ARM: pxa: select both FB and FB_W100 for eseries ARM: ixp4xx: fix ioport_unmap definition ARM: ep93xx: use ARM_PATCH_PHYS_VIRT correctly ARM: mmp: mark usb_dma_mask as __maybe_unused ARM: omap2: mark unused functions as __maybe_unused ARM: omap1: avoid unused variable warning ARM: sirf: mark sirfsoc_init_late as __maybe_unused ARM: ixp4xx: use normal prototype for {read,write}s{b,w,l} ARM: omap1/ams-delta: warn about failed regulator enable ARM: rpc: rename RAM_SIZE macro ARM: w90x900: normalize clk API ARM: ep93xx: normalize clk API ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros arm64: allwinner: sun50i-a64: Correct emac register size ARM: dts: sunxi: h3/h5: Correct emac register size ...
2017-07-27ARM: omap2: mark unused functions as __maybe_unusedArnd Bergmann
The omap_generic_init() and omap_hwmod_init_postsetup() functions are used in the initialization for all OMAP2+ SoC types, but in the extreme case that those are all disabled, we get a warning about unused code: arch/arm/mach-omap2/io.c:412:123: error: 'omap_hwmod_init_postsetup' defined but not used [-Werror=unused-function] arch/arm/mach-omap2/board-generic.c:30:123: error: 'omap_generic_init' defined but not used [-Werror=unused-function] This annotates both as __maybe_unused to shut up that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-27Merge tag 'omap-for-v4.13/fixes-merge-window' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Pull "Few fixes for omaps for issues found recently" from Tony Lindgren: - Fix disable_irq related shared IRQ warnings for omap3 PRM - Fix omap4 legacy code regression that accidentally removed code that we still need for PRM interrupts - Fix dm8168-evm NAND pins and MMC write protect pin direction - Fix dra71-evm mdio impedance values * tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra71-evm: mdio: Fix impedance values ARM: dts: dm816x: Correct the state of the write protect pin ARM: dts: dm816x: Correct NAND support nodes ARM: OMAP4: Fix legacy code clean-up regression ARM: OMAP2+: Fix omap3 prm shared irq
2017-07-17ARM: OMAP2+: hsmmc.c: Remove dead codeFaiz Abbas
Most platforms using OMAP hsmmc driver have switched to device tree for passing platform data to omap_hsmmc.c driver. The hsmmc.c file in mach-omap2 exists only to support pandora board which uses wl1251 driver in legacy platform data mode. Hence, remove the dead code not used by the pandora board. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-07-04Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is for a few platforms: - Andres Färber adds initial support for the Actions Semi S500 (aka 'owl') platform, a close relative of the S900 platform he adds for arm64. - in mach-omap2, we remove more legacy code - Rockchips gains support for the RV1108 SoC designed for camera applications. - For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70) - Minor updates for other platforms, including davinci, s3c64xx, prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits) ARM: owl: smp: Drop bogus holding pen ARM: owl: Drop custom machine ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3 soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating soc: actions: Add Owl SPS dt-bindings: power: Add Owl SPS power domains MAINTAINERS: Update Actions Semi section with SPS ARM: owl: Implement CPU enable-method for S500 MAINTAINERS: Add Actions Semi Owl section ARM: Prepare Actions Semi S500 ARM: socfpga: Increase max number of GPIOs ARM: stm32: Introduce MACH_STM32F469 flag ARM: prima2: remove redundant select CPU_V7 ARM: davinci: fix const warnings ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON ARM: OMAP4: hwmod_data: add SHAM crypto accelerator ARM: OMAP4: hwmod data: add des ARM: OMAP4: hwmod data: add aes2 ARM: OMAP4: hwmod data: add aes1 ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe() ...
2017-07-03Merge tag 'usb-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big patchset of USB and PHY driver updates for 4.13-rc1. On the PHY side, they decided to move files around to "make things easier" in their tree. Hopefully that wasn't a mistake, but in linux-next testing, we haven't had any reported problems. There's the usual set of gadget and xhci and musb updates in here as well, along with a number of smaller updates for a raft of different USB drivers. Full details in the shortlog, nothing really major. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (173 commits) Add USB quirk for HVR-950q to avoid intermittent device resets USB hub_probe: rework ugly goto-into-compound-statement usb: host: ohci-pxa27x: Handle return value of clk_prepare_enable USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick usbip: Fix uninitialized variable bug in vhci usb: core: read USB ports from DT in the usbport LED trigger driver dt-bindings: leds: document new trigger-sources property usb: typec: ucsi: Add ACPI driver usb: typec: Add support for UCSI interface usb: musb: compress return logic into one line USB: serial: propagate late probe errors USB: serial: refactor port endpoint setup usb: musb: tusb6010_omap: Convert to DMAengine API ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well usb: musb: tusb6010_omap: Allocate DMA channels upfront usb: musb: tusb6010_omap: Create new struct for DMA data/parameters usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks usb: musb: Add quirk to avoid skb reserve in gadget mode ...
2017-06-30ARM: OMAP4: Fix legacy code clean-up regressionTony Lindgren
Commit 2a26d31b1bae ("ARM: OMAP2+: Remove unused legacy code for PRM") removed PRM platform init code that I thought is unused. Turns out omap4 still needs this code, so let's do a partial revert to add it back. I probably missed this earlier as the comments used to say "OMAP4+ is DT only now" for !of_have_populated_dt() to exit early and missed the negative test. Let's not add those lines back as they are confusing and no longer needed as we only boot in device tree mode. Without things things can mysterious fail for i2c, for example LM75 I2C temperature sensor can stop working as the PRM interrupts won't work. Fixes: 2a26d31b1bae ("ARM: OMAP2+: Remove unused legacy code for PRM") Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-29ARM: OMAP2+: Fix omap3 prm shared irqTony Lindgren
Shared interrupts with IRQ_NOAUTOEN got a warning added with commit 04c848d39879 ("genirq: Warn when IRQ_NOAUTOEN is used with shared interrupts"). Let's just drop the IRQ_NOAUTOEN use for omap3 PRM shared interrupt as it does not seem to cause any other issues based on my testing. We have moved a lot of the code to initialize later, and whatever problems the legacy booting had seem to be gone now with pinctrl driver and device tree based booting. Otherwise we will get: WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1348 __setup_irq+0x5d0/0x64c [<c01b0260>] (__setup_irq) from [<c01b0480>] (request_threaded_irq+0xdc/0x188) [<c01b0480>] (request_threaded_irq) from [<c051c780>] (pcs_probe+0x6ec/0x8a4) [<c051c780>] (pcs_probe) from [<c05a84b8>] (platform_drv_probe+0x50/0xb0) [<c05a84b8>] (platform_drv_probe) from [<c05a6288>] (driver_probe_device+0x33c/0x478) Note that we also need to remove the related enable_irq() to avoid getting the following: WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:529 enable_irq+0x34/0x70 [<c01afa04>] (enable_irq) from [<c0c0f1fc>] (omap3_pm_init+0x118/0x3f8) [<c0c0f1fc>] (omap3_pm_init) from [<c0c0ae7c>] (am35xx_init_late+0x10/0x18) Cc: Kevin Hilman <khilman@baylibre.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-20ARM: OMAP2+: DMA: Add slave map entries for 24xx external request linesPeter Ujfalusi
The external request lines are used by tusb6010 on OMAP24xx platforms. Update the map so the driver can use dmaengine API to request the DMA channel. At the same time add temporary map containing only the external DMA request numbers for DT booted case on omap24xx since the tusb6010 stack is not yet supports DT boot. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-18Merge tag 'omap-for-v4.13/soc-v4-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc SoC changes for omap variants for v4.13 merge window: - PM clean-up in preparation of adding am335x/am437x PM support - Fixes for issues found by Coccinelle - Legacy code removal now that everything boots in device tree only mode - Interconnect changes in preparation of moving clkctrl clocks to be managed by clkctrl clock driver - Interconnect changes to add omap4 crypto acceclerator support * tag 'omap-for-v4.13/soc-v4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits) ARM: OMAP4: hwmod_data: add SHAM crypto accelerator ARM: OMAP4: hwmod data: add des ARM: OMAP4: hwmod data: add aes2 ARM: OMAP4: hwmod data: add aes1 ARM: OMAP2+: Remove unused legacy code for n8x0 ARM: OMAP2+: Remove unused legacy code for watchdog ARM: OMAP2+: Remove unused legacy code for interconnects ARM: OMAP2+: Remove unused legacy code for PRM ARM: OMAP2+: Remove unused legacy code for io.c ARM: OMAP2+: Remove unused legacy code for McBSP ARM: OMAP2+: SmartReflex: Delete an error message for a failed memory allocation in two functions ARM: OMAP2+: Use kcalloc() in sr_set_nvalues() ARM: OMAP2+: Improve a size determination in sr_dev_init() ARM: OMAP2+: Delete an error message for a failed memory allocation in two functions ARM: OMAP2+: Remove unused legacy code for device init ARM: OMAP2+: Remove unused legacy code for PMU ARM: OMAP2+: Remove unused legacy code for opp ARM: OMAP2+: hwmod: populate clkctrl clocks for hwmods if available ARM: OMAP4: cminst: add support for clkdm_xlate_address ARM: omap2+: clockdomain: add clkdm_xlate_address ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-14clocksource/drivers: Rename clocksource_probe to timer_probeDaniel Lezcano
The function name is now renamed to 'timer_probe' for consistency with the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14ARM: OMAP4: hwmod_data: add SHAM crypto acceleratorTero Kristo
OMAP4 SoC contains SHAM crypto hardware accelerator. Add hwmod data for this IP so that it can be utilized by crypto frameworks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-14ARM: OMAP4: hwmod data: add desSebastian Reichel
This fixes the following error during kernel boot: platform 480a5000.des: Cannot lookup hwmod 'des' Unfortunately the DES module is only documented partly in the OMAP4430 TRM. I found an old patch from Joel, which I took over and updated for currently mainline. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-14ARM: OMAP4: hwmod data: add aes2Sebastian Reichel
This adds the hwmod entry for the second AES module available on OMAP4. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-14ARM: OMAP4: hwmod data: add aes1Sebastian Reichel
This fixes the following error during kernel boot: platform 4b501000.aes: Cannot lookup hwmod 'aes1' Unfortunately the AES module is only documented partly in the OMAP4430 TRM. I found an old patch from Joel, which I took over and updated for currently mainline. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-12Merge branch 'omap-for-v4.13/clkctrl' into omap-for-v4.13/soc-v4Tony Lindgren
2017-06-12Merge branch 'omap-for-v4.13/legacy-v2' into omap-for-v4.13/soc-v3Tony Lindgren
2017-06-08ARM: OMAP2+: Remove unused legacy code for n8x0Tony Lindgren
We are now booting all mach-omap2 in device tree only mode. Any code that is only called in legacy boot mode where of_have_populated_dt() is not set is safe to remove now. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> [tony@atomide.com: left out probe changes to avoid merge conflict] Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-08ARM: OMAP2+: Remove unused legacy code for watchdogTony Lindgren
We are now booting all mach-omap2 in device tree only mode. Any code that is only called in legacy boot mode where of_have_populated_dt() is not set is safe to remove now. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-08ARM: OMAP2+: Remove unused legacy code for interconnectsTony Lindgren
We are now booting all mach-omap2 in device tree only mode. Any code that is only called in legacy boot mode where of_have_populated_dt() is not set is safe to remove now. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-08ARM: OMAP2+: Remove unused legacy code for PRMTony Lindgren
We are now booting all mach-omap2 in device tree only mode. Any code that is only called in legacy boot mode where of_have_populated_dt() is not set is safe to remove now. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-08ARM: OMAP2+: Remove unused legacy code for io.cTony Lindgren
We are now booting all mach-omap2 in device tree only mode. Any code that is only called in legacy boot mode where of_have_populated_dt() is not set is safe to remove now. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-08ARM: OMAP2+: Remove unused legacy code for McBSPTony Lindgren
We are now booting all mach-omap2 in device tree only mode. Any code that is only called in legacy boot mode where of_have_populated_dt() is not set is safe to remove now. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-08ARM: OMAP2+: SmartReflex: Delete an error message for a failed memory ↵Markus Elfring
allocation in two functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-08ARM: OMAP2+: Use kcalloc() in sr_set_nvalues()Markus Elfring
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>