summaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa
AgeCommit message (Collapse)Author
2020-01-29Merge tag 'usb-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...
2020-01-23usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptorsLinus Walleij
Instead of using the legacy GPIO API and keeping track on polarity inversion semantics in the driver, switch to use GPIO descriptors for this driver and change all consumers in the process. This makes it possible to retire platform data completely: the only remaining platform data member was "wakeup" which was intended to make the vbus interrupt wakeup capable, but was not set by any users and thus remained unused. VBUS was not waking any devices up. Leave a comment about it so later developers using the platform can consider setting it to always enabled so plugging in USB wakes up the platform. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200123155013.93249-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-05Merge mainline/master into arm/fixesOlof Johansson
This brings in the mainline tree right after armsoc contents was merged this release cycle, so that we can re-run savedefconfig, etc. Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05ARM: pxa: Fix resource propertiesLinus Walleij
The conversion to properties changed one assignment and missed three other assignments in the same file, fix it up so the platform compiles. The bug was reported by a few build bots but noone noticed. I noticed it when making other changes to the PXA platforms. Link: https://lore.kernel.org/r/20191203104117.85517-1-linus.walleij@linaro.org Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 50ec88120ea1 ("can: mcp251x: get rid of legacy platform data") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-01Merge tag 'backlight-next-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Functionality: - Add support for an enable GPIO; lm3630a_bl - Add support for short circuit handling; qcom-wled - Add support for automatic string detection; qcom-wled Fix-ups: - Update Device Tree bindings; lm3630a-backlight, led-backlight, qcom-wled - Constify; ipaq_micro_bl - Optimise for CPU cycles; pwm_bl - Coding style fix-ups; pwm_bl - Trivial fix-ups (white space, comments, renaming); pwm_bl, gpio_backlight, qcom-wled - Kconfig dependency hacking; LCD_HP700 - Rename, refactor and add peripherals; pm8941-wled => qcom-wled - Make use of GPIO look-up tables; tosa_bl, tosa_lcd - Remove superfluous code; gpio_backlight - Adapt GPIO direction handling; gpio_backlight - Remove legacy use of platform data; gpio_backlight Bug Fixes: - Provide modules aliases; lm3630a_bl" * tag 'backlight-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits) backlight: qcom-wled: Fix spelling mistake "trigged" -> "triggered" backlight: gpio: Pull gpio_backlight_initial_power_state() into probe backlight: gpio: Use a helper variable for &pdev->dev backlight: gpio: Remove unused fields from platform data sh: ecovec24: don't set unused fields in platform data backlight: gpio: Simplify the platform data handling sh: ecovec24: add additional properties to the backlight device backlight: gpio: Explicitly set the direction of the GPIO backlight: gpio: Remove stray newline backlight: gpio: Remove unneeded include video: backlight: tosa: Use GPIO lookup table backlight: qcom-wled: Add auto string detection logic backlight: qcom-wled: Add support for short circuit handling backlight: qcom-wled: Add support for WLED4 peripheral backlight: qcom-wled: Restructure the driver for WLED3 backlight: qcom-wled: Rename PM8941* to WLED3 backlight: qcom-wled: Add new properties for PMI8998 backlight: qcom-wled: Restructure the qcom-wled bindings backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c dt-bindings: backlight: lm3630a: Fix missing include ...
2019-11-11can: mcp251x: get rid of legacy platform dataAndy Shevchenko
Instead of using legacy platform data, switch to use device properties. For clock frequency we are using well established clock-frequency property. Users, two for now, are also converted here. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-11video: backlight: tosa: Use GPIO lookup tableArnd Bergmann
The driver should not require a machine specific header. Change it to pass the GPIO line through a lookup table, and move the timing generator definitions into the drivers itself. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-19Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC platform changes. Main theme this merge window: - The Netx platform (Netx 100/500) platform is removed by Linus Walleij-- the SoC doesn't have active maintainers with hardware, and in discussions with the vendor the agreement was that it's OK to remove. - Russell King has a series of patches that cleans up and refactors SA1101 and RiscPC support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: stm32: use "depends on" instead of "if" after prompt ARM: sa1100: convert to common clock framework ARM: exynos: Cleanup cppcheck shifting warning ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view ARM: exynos: Only build MCPM support if used arm: add missing include platform-data/atmel.h ARM: davinci: Use GPIO lookup table for DA850 LEDs ARM: OMAP2: drop explicit assembler architecture ARM: use arch_extension directive instead of arch argument ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card MAINTAINERS: mvebu: Add git entry soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh ARM: OMAP2+: Make some variables static ...
2019-07-09Merge tag 'fbdev-v5.3' of git://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev updates from Bartlomiej Zolnierkiewicz: - remove fbdev notifier usage for fbcon (as prep work to clean up the fbcon locking), add locking checks in vt/console code and make assorted cleanups in fbdev and backlight code (Daniel Vetter) - add COMPILE_TEST support to atmel_lcdfb, da8xx-fb, gbefb, imxfb, pvr2fb and pxa168fb drivers (me) - fix DMA API abuse in au1200fb and jz4740_fb drivers (Christoph Hellwig) - add check for new BGRT status field rotation bits in efifb driver (Hans de Goede) - mark expected switch fall-throughs in s3c-fb driver (Gustavo A. R. Silva) - remove fbdev mxsfb driver in favour of the drm version (Fabio Estevam) - remove broken rfbi code from omap2fb driver (me) - misc fixes (Arnd Bergmann, Shobhit Kukreti, Wei Yongjun, me) - misc cleanups (Gustavo A. R. Silva, Colin Ian King, me) * tag 'fbdev-v5.3' of git://github.com/bzolnier/linux: (62 commits) video: fbdev: imxfb: fix a typo in imxfb_probe() video: fbdev: s3c-fb: Mark expected switch fall-throughs video: fbdev: s3c-fb: fix sparse warnings about using incorrect types video: fbdev: don't print error message on framebuffer_alloc() failure video: fbdev: intelfb: return -ENOMEM on framebuffer_alloc() failure video: fbdev: s3c-fb: return -ENOMEM on framebuffer_alloc() failure vga_switcheroo: Depend upon fbcon being built-in, if enabled video: fbdev: omap2: remove rfbi video: fbdev: atmel_lcdfb: remove redundant initialization to variable ret video: fbdev-MMP: Use struct_size() in devm_kzalloc() video: fbdev: controlfb: fix warnings about comparing pointer to 0 efifb: BGRT: Add check for new BGRT status field rotation bits jz4740_fb: fix DMA API abuse video: fbdev: pvr2fb: fix link error for pvr2fb_pci_exit video: fbdev: s3c-fb: add COMPILE_TEST support video: fbdev: imxfb: fix sparse warnings about using incorrect types video: fbdev: pvr2fb: fix build warning when compiling as module fbcon: Export fbcon_update_vcs backlight: simplify lcd notifier staging/olpc_dcon: Add drm conversion to TODO ...
2019-06-25Merge tag 'pxa-for-5.3-2' of https://github.com/rjarzmik/linux into arm/socOlof Johansson
This is the pxa changes for 5.3 cycle : - a simple cleanup for lubbock * tag 'pxa-for-5.3-2' of https://github.com/rjarzmik/linux: ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-24ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global viewRussell King
There are now no users of lubbock_set_misc_wr() outside lubbock.c, so make this function static. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-12fbcon: call fbcon_fb_(un)registered directlyDaniel Vetter
With commit 6104c37094e729f3d4ce65797002112735d49cd1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev we have a static dependency between fbcon and fbdev, and we can replace the indirection through the notifier chain with a function call. v2: Sam Ravnborg noticed that mach-pxa/am200epd.c has a notifier too, and listens to this. ... Looking at the code it seems to wait for some fb to show up, so that it can get the framebuffer base address from the fb_info struct. I suspect his is some firmware fbdev. Then it uses that information to let the real fbdev driver (metronomefb.c by the looks) get at the framebuffer memory. This doesn't looke like it's easy to fix (except by deleting the entire thing, seems untouched since 2008, we might be able to get away with that), so let's just stuff a few #ifdef into fb.h and fbmem.c and cry over them for a bit. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Steve Sakoman <steve@sakoman.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-11-daniel.vetter@ffwll.ch
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429Thomas Gleixner
Based on 1 normalized pattern(s): this code is licenced under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.383521217@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 332Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as publishhed by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 48 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.292339952@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14treewide: replace #include <asm/sizes.h> with #include <linux/sizes.h>Masahiro Yamada
Since commit dccd2304cc90 ("ARM: 7430/1: sizes.h: move from asm-generic to <linux/sizes.h>"), <asm/sizes.h> and <asm-generic/sizes.h> are just wrappers of <linux/sizes.h>. This commit replaces all <asm/sizes.h> and <asm-generic/sizes.h> to prepare for the removal. Link: http://lkml.kernel.org/r/1553267665-27228-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Arnd Bergmann: "The APM X-Gene platform is now maintained by folks from Ampere computing that took over the product line a while ago, this gets reflected in the MAINTAINERS file. Cleanups continue on the older mach-davinci and mach-pxa platform, to get them to be more like the modern ones. For pxa, we now remove the Raumfeld platform code as it now works with device tree based booting. i.MX adds a couple new features for the i.MX7ULP SoC Mediatek gains support for a new SoC: MT7629 is a new wireless router platform, following MT7623. Aside from those, there are the usual minor cleanups and bugfixes across several platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits) MAINTAINERS: Update Ampere email address usb: ohci-da8xx: remove unused callbacks from platform data ARM: davinci: da830-evm: remove legacy usb helpers ARM: davinci: omapl138-hawk: remove legacy usb helpers usb: ohci-da8xx: add vbus and overcurrent gpios ARM: davinci: da830-evm: use gpio lookup entries for usb gpios ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios usb: ohci-da8xx: add a helper pointer to &pdev->dev usb: ohci-da8xx: add a new line after local variables arm64: meson: enable g12a clock controller MAINTAINERS: Add entry for uDPU board ARM: davinci: da850-evm: use GPIO hogs instead of the legacy API arm: mediatek: add MT7629 smp bring up code Revert "ARM: mediatek: add MT7623a smp bringup code" dt-bindings: soc: fix typo of MT8173 power dt-bindings ARM: meson: remove COMMON_CLK_AMLOGIC selection arm64: meson: remove COMMON_CLK_AMLOGIC selection ARM: lpc32xx: remove platform data of ARM PL111 LCD controller ARM: lpc32xx: remove platform data of ARM PL180 SD/MMC controller ARM: lpc32xx: Use kmemdup to replace duplicating its implementation ...
2019-03-04Merge tag 'spi-v5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly quiet release for SPI, the biggest thing is the conversion to use GPIO descriptors which is now 90% done but still needs some stragglers converting. Summary: - Support for inter-word delays - Conversion of the core and most drivers to use GPIO descriptors for GPIO controlled chip selects - New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum" * tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (104 commits) spi: sh-msiof: Restrict bits per word to 8/16/24/32 on R-Car Gen2/3 spi: sifive: Remove redundant dev_err call in sifive_spi_probe() spi: sifive: Remove spi_master_put in sifive_spi_remove() spi: spi-gpio: fix SPI_CS_HIGH capability spi: pxa2xx: Setup maximum supported DMA transfer length spi: sifive: Add driver for the SiFive SPI controller spi: sifive: Add DT documentation for SiFive SPI controller spi: sprd: Add a prefix for SPI DMA channel macros spi: sprd: spi: sprd: Add DMA mode support dt-bindings: spi: Add the DMA properties for the SPI dma mode spi: sprd: Add the SPI irq function for the SPI DMA mode dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible spi: use gpio[d]_set_value_cansleep for setting chipselect GPIO spi: gpio: Advertise support for SPI_CS_HIGH spi: sh-msiof: Replace spi_master by spi_controller spi: sh-hspi: Replace spi_master by spi_controller spi: rspi: Replace spi_master by spi_controller spi: atmel-quadspi: add support for sam9x60 qspi controller dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60 spi: atmel-quadspi: add support for named peripheral clock ...
2019-02-06regulator: fixed/gpio: Pull inversion/OD into gpiolibLinus Walleij
This pushes the handling of inversion semantics and open drain settings to the GPIO descriptor and gpiolib. All affected board files are also augmented. This is especially nice since we don't have to have any confusing flags passed around to the left and right littering the fixed and GPIO regulator drivers and the regulator core. It is all just very straight-forward: the core asks the GPIO line to be asserted or deasserted and gpiolib deals with the rest depending on how the platform is configured: if the line is active low, it deals with that, if the line is open drain, it deals with that too. Cc: Alexander Shiyan <shc_work@mail.ru> # i.MX boards user Cc: Haojian Zhuang <haojian.zhuang@gmail.com> # MMP2 maintainer Cc: Aaro Koskinen <aaro.koskinen@iki.fi> # OMAP1 maintainer Cc: Tony Lindgren <tony@atomide.com> # OMAP1,2,3 maintainer Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> # EM-X270 maintainer Cc: Robert Jarzmik <robert.jarzmik@free.fr> # EZX maintainer Cc: Philipp Zabel <philipp.zabel@gmail.com> # Magician maintainer Cc: Petr Cvek <petr.cvek@tul.cz> # Magician Cc: Robert Jarzmik <robert.jarzmik@free.fr> # PXA Cc: Paul Parsons <lost.distance@yahoo.com> # hx4700 Cc: Daniel Mack <zonque@gmail.com> # Raumfeld maintainer Cc: Marc Zyngier <marc.zyngier@arm.com> # Zeus maintainer Cc: Geert Uytterhoeven <geert+renesas@glider.be> # SuperH pinctrl/GPIO maintainer Cc: Russell King <rmk+kernel@armlinux.org.uk> # SA1100 Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> #OMAP1 Amstrad Delta Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06regulator: gpio: Convert to use descriptorsLinus Walleij
This converts the GPIO regulator driver to use decriptors only. We have to let go of the array gpio handling: the fetched descriptors are handled individually anyway, and the array retrieveal function does not make it possible to retrieve each GPIO descriptor with unique flags. Instead get them one by one. We request the "enable" GPIO separately as before, and make sure that this line is requested as nonexclusive since enable lines can be shared and the regulator core expects this. Most users of the GPIO regulator are using device tree. There are two boards in the kernel using the gpio regulator from a non-devicetree path: PXA hx4700 and magician. Make sure to switch these over to use descriptors as well. Cc: Philipp Zabel <p.zabel@pengutronix.de> # Magician Cc: Petr Cvek <petr.cvek@tul.cz> # Magician Cc: Robert Jarzmik <robert.jarzmik@free.fr> # PXA Cc: Paul Parsons <lost.distance@yahoo.com> # hx4700 Cc: Kevin Hilman <khilman@baylibre.com> # Meson Cc: Neil Armstrong <narmstrong@baylibre.com> # Meson Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-24ARM: pxa: remove unused empty mach/pxa25x-udc.h fileVladimir Zapolskiy
Commit c5418a0b98c1 ("usb: gadget: pxa25x_udc: move register definitions from arch") removed inclusion of mach/pxa25x-udc.h from the PXA25x UDC driver, the contents of the header file was also wiped out, however the file itself hasn't been removed, now this change removes the unused empty header file. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2019-01-23pxa2xx: replace spi_master with spi_controllerLubomir Rintel
It's also a slave controller driver now, calling it "master" is slightly misleading. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09ARM: pxa: remove raumfeld board files and defconfigDaniel Mack
These boards are now fully ported to device-tree, so the old implementation can go away. The defconfig needs downstream quirks anyway, so we can just remove it from mainline. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2019-01-05Merge tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Included in this update: - Florian Fainelli noticed that userspace segfaults caused by the lack of kernel-userspace helpers was hard to diagnose; we now issue a warning when userspace tries to use the helpers but the kernel has them disabled. - Ben Dooks wants compatibility for the old ATAG serial number with DT systems. - Some cleanup of assembly by Nicolas Pitre. - User accessors optimisation from Vincent Whitchurch. - More robust kdump on SMP systems from Yufen Wang. - Sebastian Andrzej Siewior noticed problems with the SMP "boot_lock" on RT kernels, and so we convert the Versatile series of platforms to use a raw spinlock instead, consolidating the Versatile implementation. We entirely remove the boot_lock on OMAP systems, where it's unnecessary. Further patches for other systems will be submitted for the following merge window. - Start switching old StrongARM-11x0 systems to use gpiolib rather than their private GPIO implementation - mostly PCMCIA bits. - ARM Kconfig cleanups. - Cleanup a mostly harmless mistake in the recent Spectre patch in 4.20 (which had the effect that data that can be placed into the init sections was incorrectly always placed in the rodata section)" * tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm: (25 commits) ARM: omap2: remove unnecessary boot_lock ARM: versatile: rename and comment SMP implementation ARM: versatile: convert boot_lock to raw ARM: vexpress/realview: consolidate immitation CPU hotplug ARM: fix the cockup in the previous patch ARM: sa1100/cerf: switch to using gpio_led_register_device() ARM: sa1100/assabet: switch to using gpio leds ARM: sa1100/assabet: add gpio keys support for right-hand two buttons ARM: sa1111: remove legacy GPIO interfaces pcmcia: sa1100*: remove redundant bvd1/bvd2 setting ARM: pxa/lubbock: switch PCMCIA to MAX1600 library ARM: pxa/mainstone: switch PCMCIA to MAX1600 library and gpiod APIs ARM: sa1100/neponset: switch PCMCIA to MAX1600 library and gpiod APIs ARM: sa1100/jornada720: switch PCMCIA to gpiod APIs pcmcia: add MAX1600 library ARM: sa1100: explicitly register sa11x0-pcmcia devices ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+ ARM: 8812/1: Optimise copy_{from/to}_user for !CPU_USE_DOMAINS ARM: 8811/1: always list both ldrd/strd registers explicitly ARM: 8808/1: kexec:offline panic_smp_self_stop CPU ...
2019-01-02Merge branches 'misc', 'sa1100-for-next' and 'spectre' into for-linusRussell King
2018-12-31Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms, but also a few more things: New SoC support this release: - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc) - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core Cleanups of various platforms: - OMAP1 ams-delta does some GPIO cleanups - Davinci removes of at24 platform data - Samsung cleans up old wakeup, PM debug and secondary core boot code - Renesas moves around config options and PM code to drivers/soc for sharing with 64-bit and more consistency - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug console setups - SoCFPGA adds explicit selection of ARM errata and removes some unused code This also contains a few patches that I had queued up as fixes for 4.20 but didn't send in before the release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) arm64: dts: renesas: draak: Fix CVBS input ARM: omap2: avoid section mismatch warning ARM: tegra: avoid section mismatch warning ARM: ks8695: fix section mismatch warning ARM: pxa: avoid section mismatch warning ARM: mmp: fix pxa168_device_usb_phy use on aspenite ARM: mmp: fix timer_init calls ARM: OMAP1: fix USB configuration for device-only setups ARM: OMAP1: add MMC configuration for Palm Tungsten E ARM: imx: fix dependencies on imx7ulp ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER MAINTAINERS: add drivers/soc/amlogic/ to amlogic list ARM: imx: add initial support for imx7ulp ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed ARM: dts: Fix OMAP4430 SDP Ethernet startup ARM: dts: am335x-pdu001: Fix polarity of card detection input ARM: OMAP1: ams-delta: Fix audio permanently muted ARM: dts: omap5: Fix dual-role mode on Super-Speed port arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios ARM: davinci: da850-evm: remove unnecessary include ...
2018-12-29Merge tag 'kconfig-v4.21-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig file consolidation from Masahiro Yamada: "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/" * tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: pcmcia: remove per-arch PCMCIA config entry eisa: consolidate EISA Kconfig entry in drivers/eisa rapidio: consolidate RAPIDIO config entry in drivers/rapidio pcmcia: allow PCMCIA support independent of the architecture PCI: consolidate the PCI_SYSCALL symbol PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options PCI: consolidate PCI config entry in drivers/pci MIPS: remove the HT_PCI config option
2018-12-28Merge tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "This time, this pull request contains changes crossing subsystems and archs/platforms, which is mainly because of a bigger modernization of moving from legacy GPIO to GPIO descriptors for MMC (by Linus Walleij). Additionally, once again, I am funneling changes to drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree, mostly due to that we lack a maintainer for these. Summary: MMC core: - Cleanup BKOPS support - Introduce MMC_CAP_SYNC_RUNTIME_PM - slot-gpio: Delete legacy slot GPIO handling MMC host: - alcor: Add new mmc host driver for Alcor Micro PCI based cardreader - bcm2835: Several improvements to better recover from errors - jz4740: Rework and fixup pre|post_req support - mediatek: Add support for SDIO IRQs - meson-gx: Improve clock phase management - meson-gx: Stop descriptor on errors - mmci: Complete the sbc error path by sending a stop command - renesas_sdhi/tmio: Fixup reset/resume operations - renesas_sdhi: Add support for r8a774c0 and R7S9210 - renesas_sdhi: Whitelist R8A77990 SDHI - renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W - rtsx_usb_sdmmc: Re-work card detection/removal support - rtsx_usb_sdmmc: Re-work runtime PM support - sdhci: Fix timeout loops for some variant drivers - sdhci: Improve support for error handling due to failing commands - sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers - sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs - sdhci-of-esdhc: Add support for eMMC HS400 mode - sdhci-omap: Fixup reset support - sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures - sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200 - sdhci-msm: Fixup dynamical clock gating issues - various: Complete converting all hosts into using slot GPIO descriptors Other: - Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors - Add new Alcor Micro cardreader PCI driver - Support runtime power management for memstick rtsx_usb_ms driver - Use USB remote wakeups for card detection for rtsx_usb misc driver" * tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits) mmc: mediatek: Add MMC_CAP_SDIO_IRQ support mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0 dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support mmc: core: Cleanup BKOPS support mmc: core: Drop redundant check in mmc_send_hpi_cmd() mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929) dt-bindings: sdhci-omap: Add note for cpu_thermal mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers mmc: sdhci: Add quirk to disable LED control mmc: mmci: add variant property to set command stop bit misc: alcor_pci: fix spelling mistake "invailid" -> "invalid" mmc: meson-gx: add signal resampling mmc: meson-gx: align default phase on soc vendor tree mmc: meson-gx: remove useless lock mmc: meson-gx: make sure the descriptor is stopped on errors mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65 dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs mmc: sdhci-msm: avoid unused function warning ...
2018-12-17mmc: pxa: Use GPIO descriptor for powerLinus Walleij
After converting the PXA driver to use GPIO descriptors for card detect and write protect it is relatively simple to convert it to also use a descriptor for getting the optional power control GPIO. The polarity inversion flag can also go away from the platform data since this is indicated in the GPIO machine descriptor table. Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17ARM: pxa: Delete platform data for CD/WPLinus Walleij
This deletes the platform data passed for card detect and write protect from various PXA machines. Make sure to keep .gpio_card_ro_invert as this is still in use by some machines and needed to set the right flag to the MMC core (will be cleaned up later). Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17ARM: pxa: Add GPIO descriptors for Palm27xLinus Walleij
The Palm27x devices set up the MMC card detect and write protect lines with a special helper function. Augment this helper function to also accept an optional GPIO descriptor table and pass and register this for all the Palm27x devices in that family. Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17ARM: pxa: Add gpio descriptor lookup tables for MMC CD/WPLinus Walleij
This adds GPIO descriptor look-up tables for a whole bunch of PXA boards with MMC card detect (CD) and write protect (WP) GPIO lines, so we can move away from the hard-coded GPIO numberspace. In some cases the platforms were compulsively including the <linux/gpio.h> header even if they weren't actually using it, and in these cases I simply replaced that inclusion with the more appropriate <linux/gpio/machine.h> which is what board files should be including most of the time. Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-12ARM: pxa: avoid section mismatch warningArnd Bergmann
WARNING: vmlinux.o(.text+0x19f90): Section mismatch in reference from the function littleton_init_lcd() to the function .init.text:pxa_set_fb_info() The function littleton_init_lcd() references the function __init pxa_set_fb_info(). This is often because littleton_init_lcd lacks a __init annotation or the annotation of pxa_set_fb_info is wrong. WARNING: vmlinux.o(.text+0xf824): Section mismatch in reference from the function zeus_register_ohci() to the function .init.text:pxa_set_ohci_info() The function zeus_register_ohci() references the function __init pxa_set_ohci_info(). This is often because zeus_register_ohci lacks a __init annotation or the annotation of pxa_set_ohci_info is wrong. WARNING: vmlinux.o(.text+0xf95c): Section mismatch in reference from the function cm_x300_init_u2d() to the function .init.text:pxa3xx_set_u2d_info() The function cm_x300_init_u2d() references the function __init pxa3xx_set_u2d_info(). This is often because cm_x300_init_u2d lacks a __init annotation or the annotation of pxa3xx_set_u2d_info is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-04ata: palmld: Convert to GPIO descriptorsLinus Walleij
Instead of passing GPIO numbers directly to the PalmLD ATA driver, pass GPIO descriptors from the board file and handle these in the driver. Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04ARM: pxa/lubbock: switch PCMCIA to MAX1600 libraryRussell King
As Lubbock now provides GPIOs via gpiolib for controlling the socket power, we can use the MAX1600 driver. Switch Lubbock to use this driver, which simplifies the code. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-12-04ARM: pxa/mainstone: switch PCMCIA to MAX1600 library and gpiod APIsRussell King
Convert mainstone to use the MAX1600 library and gpiod APIs for socket status and control signals. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-11-23PCI: consolidate PCI config entry in drivers/pciChristoph Hellwig
There is no good reason to duplicate the PCI menu in every architecture. Instead provide a selectable HAVE_PCI symbol that indicates availability of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the rest in drivers/pci. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-08ARM: Kconfig: remove useless "default n"Russell King
The default for Kconfig options is always n, so there's no need to explicitly state a "n" default. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-10-23Merge tag 'regulator-v5.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The biggest chunk of the regulator changes for this release outside of the new drivers is the conversion of the fixed regulator to use the GPIO descriptor API, there's a small addition to the GPIO API plus a bunch of updates to board files to implement it. This is some really welcome work from Linus Walleij that's had a bunch of review and has been sitting in -next for a while so I'm fairly happy there's no major issues. - Helpers for overlapping linear ranges. - Display opmode and consumer requested load in the regualtor_summary file in debugfs, plus a fix there. - Support for the fun and entertaining power off mechanism that the pfuze100 hardware implements. - Conversion of the fixed regulator API to use GPIO descriptors, including pulling in a bunch of patches to a bunch of board files. - New drivers for Cirrus Logic Lochnagar, Qualcomm PMS405, Rohm BD71847, ST PMIC1, and TI LM363x devices" * tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits) regulator: lochnagar: Use a consisent comment style for SPDX header regulator: bd718x7: Remove struct bd718xx_pmic regulator: Fetch enable gpiods nonexclusive regulator/gpio: Allow nonexclusive GPIO access regulator: lochnagar: Add support for the Cirrus Logic Lochnagar regulator: stpmic1: Return REGULATOR_MODE_INVALID for invalid mode regulator: stpmic1: add stpmic1 regulator driver dt-bindings: regulator: document stpmic1 pmic regulators regulator: axp20x: Mark expected switch fall-throughs regulator: bd718xx: fix build warning on x86_64 regulator: fixed: Default enable high on DT regulators regulator: bd718xx: rename bd71837 to 718xx regulator: bd718XX use pickable ranges regulator/mfd: bd718xx: rename bd71837/bd71847 common instances regulator: Support regulators where voltage ranges are selectable mfd: dt bindings: add BD71847 device-tree binding documentation regulator: dt bindings: add BD71847 device-tree binding documentation regulator/mfd: Support ROHM BD71847 power management IC regulator: da905{2,5}: Remove unnecessary array check regulator: qcom: Add PMS405 regulators ...
2018-10-03mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.hBoris Brezillon
platform_nand_xxx definitions are just used by the plat_nand driver. Let's move those definitions out of the core/driver-agnostic rawnand.h header. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Create a legacy struct and move ->IO_ADDR_{R, W} thereBoris Brezillon
We regularly have new NAND controller drivers that are making use of fields/hooks that we want to get rid of but can't because of all the legacy drivers that we might break if we do. So, instead of removing those fields/hooks, let's move them to a sub-struct which is clearly documented as deprecated. We start with the ->IO_ADDR_{R,W] fields. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03ARM: pxa: palmtreo: Drop docg4 specific initBoris Brezillon
The docg4 driver has been removed. Remove the code that was registering a docg4 device. Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: plat_nand: Pass a nand_chip object to all platform_nand_ctrl hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. In order to do that, we first need to update the platform_nand_ctrl hooks to take a nand_chip object instead of an mtd_info. We add temporary plat_nand_xxx() wrappers to the do the mtd -> chip conversion, but those will be dropped when patching nand_chip hooks to take a nand_chip object. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-09-17regulator: fixed: Convert to use GPIO descriptor onlyLinus Walleij
As we augmented the regulator core to accept a GPIO descriptor instead of a GPIO number, we can augment the fixed GPIO regulator to look up and pass that descriptor directly from device tree or board GPIO descriptor look up tables. Some boards just auto-enumerate their fixed regulator platform devices and I have assumed they get names like "fixed-regulator.0" but it's pretty hard to guess this. I need some testing from board maintainers to be sure. Other boards are straight forward, using just plain "fixed-regulator" (ID -1) or "fixed-regulator.1" hammering down the device ID. It seems the da9055 and da9211 has never got around to actually passing any enable gpio into its platform data (not the in-tree code anyway) so we can just decide to simply pass a descriptor instead. The fixed GPIO-controlled regulator in mach-pxa/ezx.c was confusingly named "*_dummy_supply_device" while it is a very real device backed by a GPIO line. There is nothing dummy about it at all, so I renamed it with the infix *_regulator_* as part of this patch set. Intel MID portions tested by Andy. Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Check the x86 BCM stuff Acked-by: Tony Lindgren <tony@atomide.com> # OMAP1,2,3 maintainer Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-23Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 32-bit SoC platform updates from Olof Johansson: "Most of the SoC updates in this cycle are cleanups and moves to more modern infrastructure: - Davinci was moved to common clock framework - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the keyboard interface (bitbanged AT keyboard via GPIO). - Removal of some stale code for Renesas platforms - Power management improvements for i.MX6LL" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits) ARM: uniphier: select RESET_CONTROLLER arm64: uniphier: select RESET_CONTROLLER ARM: uniphier: remove empty Makefile ARM: exynos: Clear global variable on init error path ARM: exynos: Remove outdated maintainer information ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15 ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill soc: r9a06g032: don't build SMP files for non-SMP config ARM: shmobile: Add the R9A06G032 SMP enabler driver ARM: at91: pm: configure wakeup sources for ULP1 mode ARM: at91: pm: add PMC fast startup registers defines ARM: at91: pm: Add ULP1 mode support ARM: at91: pm: Use ULP0 naming instead of slow clock ARM: hisi: handle of_iomap and fix missing of_node_put ARM: hisi: check of_iomap and fix missing of_node_put ARM: hisi: fix error handling and missing of_node_put ARM: mx5: Set the DBGEN bit in ARM_GPC register ARM: imx51: Configure M4IF to avoid visual artifacts ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll ARM: imx: fix i.MX6SLL build ...
2018-08-14Merge tag 'sound-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It's been busy summer weeks and hence lots of changes, partly for a few new drivers and partly for a wide range of fixes. Here are highlights: ALSA Core: - Fix rawmidi buffer management, code cleanup / refactoring - Fix the SG-buffer page handling with incorrect fallback size - Fix the stall at virmidi trigger callback with a large buffer; also offloading and code-refactoring along with it - Various ALSA sequencer code cleanups ASoC: - Deploy the standard snd_pcm_stop_xrun() helper in several drivers - Support for providing name prefixes to generic component nodes - Quite a few fixes for DPCM as it gains a bit wider use and more robust testing - Generalization of the DIO2125 support to a simple amplifier driver - Accessory detection support for the audio graph card - DT support for PXA AC'97 devices - Quirks for a number of new x86 systems - Support for AM Logic Meson, Everest ES7154, Intel systems with RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707 HD-audio: - Code refactoring in HD-audio ext codec codes to drop own classes; preliminary works for the upcoming legacy codec support - Generalized DRM audio component for the upcoming radeon / amdgpu support - Unification of mic mute-LED and GPIO support for various codecs - Further improvement of CA0132 codec support including Recon3D - Proper vga_switcheroo handling for AMD i-GPU - Update of model list in documentation - Fixups for another HP Spectre x360, Conexant codecs, power-save blacklist update USB-audio: - Fix the invalid sample rate setup with external clock - Support of UAC3 selector units and processing units - Basic UAC3 power-domain support - Support for Encore mDSD and Thesycon-based DSD devices - Preparation for future complete callback changes Firewire: - Add support for MOTU Traveler Misc: - The endianess notation fixes in various drivers - Add fall-through comment in lots of drivers - Various sparse warning fixes, e.g. about PCM format types" * tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (529 commits) ASoC: adav80x: mark expected switch fall-through ASoC: da7219: Add delays to capture path to remove DC offset noise ALSA: usb-audio: Mark expected switch fall-through ALSA: mixart: Mark expected switch fall-through ALSA: opl3: Mark expected switch fall-through ALSA: hda/ca0132 - Add exit commands for Recon3D ALSA: hda/ca0132 - Change mixer controls for Recon3D ALSA: hda/ca0132 - Add Recon3D input and output select commands ALSA: hda/ca0132 - Add DSP setup defaults for Recon3D ALSA: hda/ca0132 - Add Recon3D startup functions and setup ALSA: hda/ca0132 - Add bool variable to enable/disable pci region2 mmio ALSA: hda/ca0132 - Add Recon3D pincfg ALSA: hda/ca0132 - Add quirk ID and enum for Recon3D ALSA: hda/ca0132 - Add alt_functions unsolicited response ALSA: hda/ca0132 - Clean up ca0132_init function. ALSA: hda/ca0132 - Create mmio gpio function to make code clearer ASoC: wm_adsp: Make DSP name configurable by codec driver ASoC: wm_adsp: Declare firmware controls from codec driver ASoC: max98373: Added software reset register to readable registers ASoC: wm_adsp: Correct DSP pointer for preloader control ...