summaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c24xx
AgeCommit message (Collapse)Author
2014-01-23Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
2014-01-14ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>Linus Walleij
Previously the custom GPIO header for the S3C24xx would in turn bring in the custom pin control implementation from <plat/gpio-cfg.h>. This is not good as it mixes up two subsystems and makes the dependencies hard to track. Make the dependency explicit by explicitly including the pin control header where needed. Reported-by: Arnd Bergmann <arnd@arndb.de> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Mark Brown <broonie@kernel.org> Cc: linux-samsung-soc@vger.kernel.org Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-14ARM: S3C[24|64]xx: move includes back under <mach/> scopeLinus Walleij
When refactoring and breaking out the includes for the machine-specific GPIO configuration, two files were created in <linux/platform_data/gpio-samsung-s3c[24|64]xx.h>, but as that namespace shall be used for defining data exchanged between machines and drivers, using it for these broad macros and config settings is wrong. Move the headers back into the machine-local <mach/gpio-samsung.h> file and think about the next step. Reported-by: Arnd Bergmann <arnd@arndb.de> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-08ARM: s3c24xx: fix build errorLinus Walleij
When enabling device tree on the S3C an additional build bug appears in the Osiris DVS board file: CC arch/arm/mach-s3c24xx/mach-osiris-dvs.o archh/arm/mach-s3c24xx/mach-osiris-dvs.c: In function ‘osiris_dvs_notify’: arch/arm/mach-s3c24xx/mach-osiris-dvs.c:77:4: error: implicit declaration of function ‘S3C2410_GPB’ [-Werror=implicit-function-declaration] gpio_set_value(OSIRIS_GPIO_DVS, 1); ^ Fix this by explicitly including <linux/platform_data/gpio-samsung-s3c24xx.h> Reported-by: Arnd Bergmann <arnd@arndb.de> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: linux-samsung-soc@vger.kernel.org Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20ARM: s3c24xx: get rid of custom <mach/gpio.h>Linus Walleij
This isolates the custom S3C24xx GPIO definition table to <linux/platform_data/gpio-samsung-s3x24xx.h> as this is used in a few different places in the kernel, removing the need to depend on the implicit inclusion of <mach/gpio.h> from <linux/gpio.h> and thus getting rid of a few nasty cross-dependencies. We also delete the nifty CONFIG_S3C24XX_GPIO_EXTRA stuff. The biggest this can ever be for the S3C24XX is CONFIG_S3C24XX_GPIO_EXTRA = 128, and then for CPU_S3C2443 or CPU_S3C2416 32*12 GPIOs are added, so 32*12+128 = 512 is the absolute roof value on this platform. So we set the size of ARCH_NR_GPIO to this and the GPIOs array will fit any S3C24XX platform, as per pattern from other archs. ChangeLog v2->v3: - Move the movement of the S3C64XX gpio.h file out of this patch and into the follow-up patch where it belongs. ChangeLog v1->v2: - Added an #ifdef ARCH_S3C24XX around the header inclusion in drivers/gpio/gpio-samsung.c as we would otherwise have colliding definitions when compiling S3C64XX. - Rename inclusion guard in the header file. Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: linux-samsung-soc@vger.kernel.org Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12ARM: SAMSUNG: remove IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the use of the IRQF_DISABLED flag. It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-11-18Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ...
2013-11-16Merge tag 'pwm/for-3.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "Mostly bug fixes and clean up. There is a new driver, which is actually moving a custom PWM driver from drivers/misc. The majority of the patches are enhancements to the device tree support in the pwm-backlight driver. Backlights can now additionally be powered using a regulator and enabled using a GPIO in addition to just the PWM input" * tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits) Documentation/pwm: Update supported SoC name for pwm-samsung pwm: samsung: Fix kernel warning while unexporting a channel MAINTAINERS: Move PWM subsystem tree to kernel.org Documentation/pwm: Fix trivial typos pwm-backlight: Remove unused variable pwm_backlight: avoid short blank screen while doing hibernation pwm-backlight: Fix brightness adjustment pwm: add ep93xx PWM support pwm-backlight: Allow for non-increasing brightness levels pwm-backlight: Add power supply support pwm-backlight: Use new enable_gpio field unicore32: Initialize PWM backlight enable_gpio field ARM: shmobile: Initialize PWM backlight enable_gpio field ARM: SAMSUNG: Initialize PWM backlight enable_gpio field ARM: pxa: Initialize PWM backlight enable_gpio field ARM: OMAP: Initialize PWM backlight enable_gpio field pwm-backlight: Add optional enable GPIO pwm-backlight: Track enable state pwm-backlight: Refactor backlight power on/off pwm-backlight: Improve readability ...
2013-10-21ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442Heiko Stuebner
s3c2410 and s3c2442 share the same dma channels while s3c2440 has slight differences. But on all three the reachable sources per dma channel has constraints attached and thus encodes the usable combinations using the S3C24XX_DMA_CHANREQ macro. This also fixes the warning about s3c2410_dma_resource being unused as reported by Olof Johansson. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-21ARM: S3C24XX: Fix possible dma selection warningHeiko Stuebner
Currently the s3c sound support selects CONFIG_S3C2410_DMA on s3c24xx architectures while the generic dma config is enabled by CONFIG_S3C24XX_DMA. With the way the Kconfig options are layed out currently it is possible to enable Samsung sound support without enabling the necessary dma support resulting in warnings like warning: (SND_SOC_SAMSUNG && SND_S3C24XX_I2S && SND_S3C2412_SOC_I2S && SND_SOC_SAMSUNG_SMDK2443_WM9710 && SND_SOC_SAMSUNG_LN2440SBC_ALC650) selects S3C2410_DMA which has unmet direct dependencies (ARCH_S3C24XX && S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)) Therefore bring the s3c2410 dma support in line with the way the other s3c24xx SoCs handle this by having the SoC dma-support selected if the generic s3c dma support is enabled and have the sound support depend on S3C24XX_DMA on these arches. The s3c2442 is using the same dma descriptors and therefore also selected S3C2410_DMA. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-16ARM: SAMSUNG: Initialize PWM backlight enable_gpio fieldThierry Reding
The GPIO API defines 0 as being a valid GPIO number, so this field needs to be initialized explicitly. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-08ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443Heiko Stuebner
This includes defining the mapping for the request sources. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-08ARM: S3C24XX: number the dma clocksHeiko Stuebner
Each dma channel has its own clock. The upcoming dma driver wants to handle these itself and therefore needs to be able to get the correct clock for a channel. Therefore rename the dma clocks to "dma.X" for s3c2412, s3c2416 and s3c2443. This does not change the behaviour for the old dma driver at all, as all dma clocks are still always on and not handled by the old dma driver at all. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-09-30misc: (at24) move header to linux/platform_data/Vivien Didelot
This patch moves the at24.h header from include/linux/i2c to include/linux/platform_data and updates existing support accordingly. It also fixes the following checkpatch warning: WARNING: please, no space before tabs #436: FILE: include/linux/platform_data/at24.h:31: + * ^Iu8 *mac_addr = ethernet_pdata->mac_addr;$ Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-12ARM: SAMSUNG: Remove pwm-clock infrastructureTomasz Figa
Since all the used PWM prescalers and dividers configuration has been moved to appropriate drivers, the pwm-clock infrastructure is now unused and so this patch removes it. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-12ARM: SAMSUNG: Modify board files to use new PWM platform deviceTomasz Figa
This patch modifies any board files using the legacy PWM device to use the new device instead. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Move all platforms to new clocksource driverTomasz Figa
This patch moves all Samsung platforms using PWM clocksource from legacy samsung-time to new samsung-pwm-timer driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Set PWM platform dataTomasz Figa
This patch adds PWM platform data needed for legacy (non-DT) platforms to handle SoC-specific bits of the PWM/timer block. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Unify base address definitions of timer blockTomasz Figa
This patch makes all defintions of timer block base address use the same prefix to allow using the common name to define platform device resource. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-24Merge tag 'samsung-fixes-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: Samsung fixes for v3.11 - fix kernel booting on exynos5440 skip pm which is not supported update regarding LPAE features - fix s3c2440 uart with adding clkdev entries - fix compilatioin for Samsung SoCs with selecting pm - update ARCH_NR_GPIO to support exynos4412 has more gpios * tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos ARM: EXYNOS: Fix low level debug support ARM: SAMSUNG: Save/restore only selected uart's registers ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART ARM: EXYNOS: Enable 64-bit DMA for EXYNOS5440 if LPAE is enabled ARM: EXYNOS: change the PHYSMEM_BITS and SECTION_SIZE ARM: EXYNOS: skip pm support on exynos5440 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-24ARM: S3C24XX: Add missing clkdev entries for s3c2440 UARTSylwester Nawrocki
This patch restores serial port operation which has been broken since commit 60e93575476f ("serial: samsung: enable clock before clearing pending interrupts during init") That commit only uncovered the real issue which was missing clkdev entries for the "uart" clocks on S3C2440. It went unnoticed so far because return value of clk API calls were not being checked at all in the samsung serial port driver. This patch should be backported to at least 3.10 stable kernel, since the serial port has not been working on s3c2440 since 3.10-rc5. Cc: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> [on S3C2440 SoC based Mini2440 board] Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Tested-by: Juergen Beisert <jbe@pengutronix.de> Cc: <stable@vger.kernel.org> [3.10] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-16cpufreq: s3c24xx: fix "depends on ARM_S3C24XX" in KconfigPaul Bolle
Kconfig symbol S3C24XX_PLL depends on ARM_S3C24XX. But that symbol doesn't exist. Commit f023f8dd59bf ("cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq"), which added this issue, makes it clear that ARM_S3C24XX_CPUFREQ was intended here. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-09reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Merge tag 'pm+acpi-3.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
2013-07-02Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...
2013-07-02Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree changes from Arnd Bergmann: "These changes from 30 individual branches for the most part update device tree files, but there are also a few source code changes that have crept in this time, usually in order to atomically move over a driver from using hardcoded data to DT probing. A number of platforms change their DT files to use the C preprocessor, which is causing a bit of churn, but that is hopefully only this once" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits) ARM: at91: dt: rm9200ek: add spi support ARM: at91: dt: rm9200: add spi support ARM: at91/DT: at91sam9n12: add SPI DMA client infos ARM: at91/DT: sama5d3: add SPI DMA client infos ARM: at91/DT: fix SPI compatibility string ARM: Kirkwood: Fix the internal register ranges translation ARM: dts: bcm281xx: change comment to C89 style ARM: mmc: bcm281xx SDHCI driver (dt mods) ARM: nomadik: add the new clocks to the device tree clk: nomadik: implement the Nomadik clocks properly ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support arm: mvebu: enable mini-PCIe connectors on Armada 370 RD ARM: shmobile: irqpin: add a DT property to enable masking on parent ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ...
2013-07-02Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
2013-06-20Merge branches 'samsung/exynos-dt2' and 'samsung/s3c24xx-dt2' into next/driversArnd Bergmann
This is the merge base for samsung/common-clk-audio Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-19ARM: SAMSUNG: Let platforms use the new watchdog reset driverTomasz Figa
This patch moves all platforms using the legacy watchdog reset helper function to the new watchdog reset driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: S3C24XX: update uart addresses in s3c2416-dt auxdataHeiko Stuebner
Commit 9ee51f01eee8 (tty: serial/samsung: make register definitions global) removed the S3C2410_PA_UARTX defines that the newly merged s3c2416 dt support still expected. So update mach-s3c2416-dt.c to use the S3C24XX_PA_UART constant until we have support for the common clock framework the the s3c2416-dt. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: SAMSUNG: Consolidate uncompress subroutineTushar Behera
For mach-exynos, uart_base is a pointer and the value is calculated in the machine folder. For other machines, uart_base is defined as a macro in platform directory. For symmetry, the uart_base macro definition is removed and the uart_base calculation is moved to specific machine folders. This would help us consolidating uncompress subroutine for s5p64x0. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-04cpufreq: rename index as driver_data in cpufreq_frequency_tableViresh Kumar
The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-21ARM: dts: add devicetree support for s3c2416-smdk2416Heiko Stuebner
Definitions in s3c24xx.dtsi are usable for all s3c24xx SoCs, but some need to be extended with proper compatible properties, as can be seen in s3c2416.dtsi. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-21ARM: S3C24XX: remove obsolete s3c2412 specific dma settingsHeiko Stuebner
The s3c2412 dma init contained code to handle dma-direction specific settings. As now all s3c2412-dma-channels are direction-independent this is not needed anymore. As the s3c2412 also was the only user of this, it can go away completely. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-21ARM: S3C24XX: dma-s3c2443 - do not write into arbitary bitsHeiko Stuebner
The values read from the channel map always also contain the DMA_CH_VALID (= 1<<31) setting, which should not get written into the register, even if this bit is unused. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-21ARM: S3C24XX: split s3c2412 spi dma channelsHeiko Stuebner
While s3c24xx before s3c2412 (2410, 2440, 2442) use one dma channel for both sending and receiving spi data, all later s3c24xx socs use separate channels. To keep with the structure of "one spi channel" s3c2412 introduced a channel_rx attribute to the map and selects the correct request channel depending on the dma direction, hiding the underlying separation from view. The s3c24xx-spi driver, which would need this, currently does not use dma at all, but as s3c2443 has both highspeed (spi0) and regular (spi1) controllers and also uses the split scheme a future dma support for s3c24xx-spi would in any case need to differentiate between old-style and new-style spi channel structure. Thus we can swtch to the split channel structure like in later socs. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-20cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreqViresh Kumar
This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-04Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
2013-05-03Merge tag 'sound-3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Mostly many small changes spread as seen in diffstat in sound/* directory by this update. A significant change in the subsystem level is the introduction of snd_soc_component, which will help more generic handling of SoC and off-SoC components. Also, snd_BUG_ON() macro is enabled unconditionally now due to its misuses, so people might hit kernel warnings (it's a good thing for us). - compress-offload: support for capture by Charles Keepax - HD-audio: codec delay support by Dylan Reid - HD-audio: improvements/fixes in generic parser: better headphone mic and headset mic support, jack_modes hint consolidation, proper beep attach/detachment, generalized power filter controls by David Henningsson, et al - HD-audio: Improved management of HDMI codec pins/converters - HD-audio: Better pin/DAC assignment for VIA codecs - HD-audio: Haswell HDMI workarounds - HD-audio: ALC268 codec support, a few new quirks for Chromebooks - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency fix by Clemens Ladisch - USB: support for DSD formats by Daniel Mack - USB: A few UAC2 device endian/cock fixes by Eldad Zack - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller, Yamaha THRxx devices - HDSPM: updates for TCO controls by Adrian Knoth - ASoC: Add a snd_soc_component object type for generic handling of SoC and off-SoC components by Kuninori Morimoto, - dmaengine: a large set of cleanups and conversions by Lars-Peter Clausen - ASoC DAPM: performance optimizations from Ryo Tsutsui - ASoC DAPM: support for mixer control sharing by Stephen Warren - ASoC: multiplatform ARM cleanups from Arnd Bergmann - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack" * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (315 commits) ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch ALSA: asihpi: add format support check in snd_card_asihpi_capture_formats ALSA: pcm_format_to_bits strong-typed conversion ALSA: compress: fix the states to check for allowing read ALSA: hda - Move Thinkpad X220 to use auto parser ALSA: USB: adjust for changed 3.8 USB API ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources sound: oss/dmabuf: use dma_map_single ALSA: ali5451: use mdelay instead of large udelay constants ALSA: hda - Add the support for ALC286 codec ALSA: usb-audio: USB quirk for Yamaha THR10C ALSA: usb-audio: USB quirk for Yamaha THR5A ALSA: usb-audio: USB quirk for Yamaha THR10 ALSA: usb-audio: Fix autopm error during probing ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT ALSA: sound kconfig typo ALSA: emu10k1: Fix dock firmware loading ASoC: ux500: forward declare msp_i2s_platform_data ASoC: davinci-mcasp: Add Support BCLK-to-LRCLK ratio for TDM modes ASoC: davinci-pcm, davinci-mcasp: Clean up active_serializers ...
2013-05-02Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c changes from Wolfram Sang: - an arbitration driver. While the driver is quite simple, it caused discussion if we need additional arbitration on top of the one specified in the I2C standard. Conclusion is that I accept a few generic mechanisms, but not very specific ones. - the core lost the detach_adapter() call. It has no users anymore and was in the way for other cleanups. attach_adapter() is sadly still there since there are users waiting to be converted. - the core gained a bus recovery infrastructure. I2C defines a way to recover if the data line is stalled. This mechanism is now in the core and drivers can now pass some data to make use of it. - bigger driver cleanups for designware, s3c2410 - removing superfluous refcounting from drivers - removing Ben Dooks as second maintainer due to inactivity. Thanks for all your work so far, Ben! - bugfixes, feature additions, devicetree fixups, simplifications... * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: xiic: must always write 16-bit words to TX_FIFO i2c: octeon: use HZ in timeout value i2c: octeon: Fix i2c fail problem when a process is terminated by a signal i2c: designware-pci: drop superfluous {get|put}_device i2c: designware-plat: drop superfluous {get|put}_device i2c: davinci: drop superfluous {get|put}_device MAINTAINERS: Ben Dooks is inactive regarding I2C i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver i2c: at91: convert to dma_request_slave_channel_compat() i2c: mxs: do error checking and handling in PIO mode i2c: mxs: remove races in PIO code i2c-designware: switch to use runtime PM autosuspend i2c-designware: use usleep_range() in the busy-loop i2c-designware: enable/disable the controller properly i2c-designware: use dynamic adapter numbering on Lynxpoint i2c-designware-pci: use managed functions pcim_* and devm_* i2c-designware-pci: use dev_err() instead of printk() i2c-designware: move to managed functions (devm_*) i2c: remove CONFIG_HOTPLUG ifdefs i2c: s3c2410: Add SMBus emulation for block read ...
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-04-30Merge tag 'pm+acpi-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
2013-04-28Merge branch 'fixes' into next/cleanupOlof Johansson
Merging in fixes since there's a conflict in the omap4 clock tables caused by it. * fixes: (245 commits) ARM: highbank: fix cache flush ordering for cpu hotplug ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock arm: mvebu: Fix the irq map function in SMP mode Fix GE0/GE1 init on ix2-200 as GE0 has no PHY ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller ARM: S3C24XX: Correct NR_IRQS definition for s3c2440 ARM i.MX6: Fix ldb_di clock selection ARM: imx: provide twd clock lookup from device tree ARM: imx35 Bugfix admux clock ARM: clk-imx35: Bugfix iomux clock + Linux 3.9-rc6 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-omap2/cclock44xx_data.c
2013-04-28Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (57 commits) cpufreq: MAINTAINERS: Add co-maintainer cpufreq: pxa2xx: initialize variables ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y cpufreq: cpu0: Put cpu parent node after using it cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates cpufreq: ARM big LITTLE: put DT nodes after using them cpufreq: Don't call __cpufreq_governor() for drivers without target() cpufreq: exynos5440: Protect OPP search calls with RCU lock cpufreq: dbx500: Round to closest available freq cpufreq: Call __cpufreq_governor() with correct policy->cpus mask cpufreq / intel_pstate: Optimize intel_pstate_set_policy cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver arm: exynos: Enable OPP library support for exynos5440 cpufreq: exynos: Remove error return even if no soc is found cpufreq: exynos: Add cpufreq driver for exynos5440 cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor cpufreq: ondemand: allow custom powersave_bias_target handler to be registered cpufreq: convert cpufreq_driver to using RCU cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq cpufreq: sparc: move cpufreq driver to drivers/cpufreq ... Conflicts: MAINTAINERS (with commit a8e39c3 from pm-cpuidle) drivers/cpufreq/cpufreq_governor.h (with commit beb0ff3)
2013-04-19Merge branch 'samsung/exynos-multiplatform' into next/driversArnd Bergmann
Merging this into the next/drivers branch avoids a number of pointless conflicts with code changed here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19ARM: exynos: move debug-macro.S to include/debug/Arnd Bergmann
The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-18Merge tag 'asoc-v3.10-2' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: More updates for v3.10 The main additional change here is Lars-Peter's DMA work plus the platform conversions which have been tested - getting this in mainline will make life easier for development after the merge window. These factor a large chunk of code out of the drivers for the platforms using dmaengine, greatly simplifying development.
2013-04-14Merge 3.9-rc7 intp tty-nextGreg Kroah-Hartman
We want the fixes here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11tty: serial/samsung: make register definitions globalArnd Bergmann
The registers for the Samsung S3C serial port are currently defined in the platform specific arch/arm/plat-samsung/include/plat/regs-serial.h file, which is not visible to multiplatform capable drivers. Unfortunately, it is not possible to move the file into a more local place as we should normally try to, because the same registers may be used in one of four places: * In the driver itself * In platform-independent ARM code for early debug output * In platform_data definitions * In the Samsung platform power management code I have also found no way to logically split out a platform_data file, other than possibly move everything into include/linux/platform_data, which also felt wrong. The only part of this file that makes sense to keep specific to the s3c24xx platform are the virtual and physical addresses defined here, which are needed in no other location. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>