summaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c64xx
AgeCommit message (Collapse)Author
2017-02-28Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - nommu updates from Afzal Mohammed cleaning up the vectors support - allow DMA memory "mapping" for nommu Benjamin Gaignard - fixing a correctness issue with R_ARM_PREL31 relocations in the module linker - add strlen() prototype for the decompressor - support for DEBUG_VIRTUAL from Florian Fainelli - adjusting memory bounds after memory reservations have been registered - unipher cache handling updates from Masahiro Yamada - initrd and Thumb Kconfig cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits) ARM: mm: round the initrd reservation to page boundaries ARM: mm: clean up initrd initialisation ARM: mm: move initrd init code out of arm_memblock_init() ARM: 8655/1: improve NOMMU definition of pgprot_*() ARM: 8654/1: decompressor: add strlen prototype ARM: 8652/1: cache-uniphier: clean up active way setup code ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h> ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly ARM: 8649/2: nommu: remove Hivecs configuration is asm ARM: 8648/2: nommu: display vectors base ARM: 8647/2: nommu: dynamic exception base address setting ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig ARM: 8644/1: Reduce "CPU: shutdown" message to debug level ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL ARM: 8639/1: Define KERNEL_START and KERNEL_END ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_ ARM: 8637/1: Adjust memory boundaries after reservations ARM: 8636/1: Cleanup sanity_check_meminfo ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support ...
2017-02-28ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbolFlorian Fainelli
All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-02-23Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e. C code changes for SoC platforms. This release cycle the diffstat is quite nice, in that we're removing 3x the amount of code that's being added. The main reason for this is that there's a removal of camera drivers for Freescale i.MX chips (driver was removed so the device registration isn't needed any more). There's also removal of display initialization code for OMAP that is no longer needed. The rest are mostly minor tweaks and cleanups; constification on Samsung platforms, cleanup of ux500 platform data, purge of other unused platform data/device seutp on i.MX and other good stuff. New SoC support this cycle is for two Allwinner platforms, H2+ and V3s" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: ux500: remove deleted file from Makefile ARM: ep93xx: Disable TS-72xx watchdog before uncompressing ARM: ux500: cut some platform data MAINTAINERS: Update for the current location of the bcm2835 tree. ARM: davinci: remove BUG_ON() from da850_register_sata() ARM: davinci: da850: model the SATA refclk ARM: davinci: da850: add con_id for the SATA clock ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA arm: mvebu: support for SMP on 98DX3336 SoC dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property soc: dove: constify reset_control_ops structures ARM: mv78xx0: fix possible PCI buffer overflow MAINTAINERS: transfer maintainership for the EZX platform ARM: shmobile: rcar-gen2: Add more register documentation ARM: tegra: paz00: Fix __initdata placement ARM: OMAP: clock: Remove unused mpurate cmdline option ARM: davinci: add skeleton for pdata-quirks arm: sunxi: add support for V3s SoC ARM: OMAP2+: omap_hwmod: Add support for earlycon arm: hisi: drop extern hip01_cpu_die ...
2017-01-10Merge tag 'v4.10-rc1' into asoc-samsungMark Brown
Linux 4.10-rc1
2016-12-29ARM: s3c64xx: Constify wake_irqsKrzysztof Kozlowski
samsung_sync_wakemask() accepts pointer to const data so wake_irqs can be made const to increase safeness. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-12-29ARM: s3c64xx: Annotate external clock frequencies __ro_after_initKrzysztof Kozlowski
The xtal_f and xusbxti_f static variables are modified only through __init accessors (like s3c64xx_set_xtal_freq()). Later these variables are used only in read-only way so we can mark them __ro_after_init to increase code safeness. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-12-29ARM: s3c64xx: Drop initialization of unused struct s3c_audio_pdata fieldsSylwester Nawrocki
Remove initialization of dma_{filter, playback, capture, capture_mic} fields where it is not used any more. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-12-17Merge tag 'for-linus-20161216' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "Nothing enormous here, though notably we have some of the first work of a few new maintainers. I think for now I'll still be sending pull requests, but that's open to change in the future. Summary: Core: - dynamic BDI object allocation (resolves some problems when built as a module) - cleanups in the ooblayout handling NAND: - new tango NAND controller driver - new ox820 NAND controller driver - addition of a new full-ID entry in the nand_ids table - rework of the s3c240 driver to support DT - extension of the nand_sdr_timings to expose tCCS, tPROG and tR - addition of a new flag to ask the core to wait for tCCS when sending a RNDIN/RNDOUT command - addition of a new flag to ask the core to let the controller driver send the READ/PROGPAGE command Minor fixes/cleanup/cosmetic changes: - properly support 512 ECC step size in the sunxi driver - improve the error messages in the PXA probe path - fix module autoload in the omap2 driver - cleanup of several nand drivers to return nand_scan{_tail}() error code instead of returning -EIO - various cleanups in the denali driver - fix an error check in nandsim SPI NOR: - new flash IDs - wait for Spansion flash to be ready after quad-enable - error handling fixes for Candence QSPI - constify some structures in Freescale QSPI driver" * tag 'for-linus-20161216' of git://git.infradead.org/linux-mtd: (71 commits) mtd: Allocate bdi objects dynamically mtd: nand: tango: Add standard legalese header mtd: maps: add missing iounmap() in error path mtd: spi-nor: constify fsl_qspi_devtype_data mtd: spi-nor: Add support for mr25h40 mtd: spi-nor: Add support for N25Q016A mtd: spi-nor: Add at25df321 spi-nor flash support mtd: spi-nor: Fix some error codes in cqspi_setup_flash() mtd: spi-nor: Off by one in cqspi_setup_flash() mtd: spi-nor: add support for s25fl208k mtd: spi-nor: fix flags for s25fl128s mtd: spi-nor: fix spansion quad enable mtd: spi-nor: add Macronix mx25u25635f to list of known devices. mtd: mtdswap: fix spelling mistake "erassure" -> "erasure" mtd: bcm47xxpart: fix parsing first block after aligned TRX mtd: nand: tango: Use nand_to_mtd() instead of directly accessing chip->mtd mtd: remove unneeded initializer in mtd_ooblayout_count_bytes() mtd: use min_t() to refactor mtd_ooblayout_{get, set}_bytes() mtd: remove unneeded initializer in mtd_ooblayout_{get, set}_bytes() mtd: nand: nandsim: fix error check ...
2016-12-15ASoC: samsung: Remove tests of member addressKrzysztof Kozlowski
The driver was checking for non-NULL address of struct's members: - s3c_audio_pdata->type (union), - s3c_audio_pdata->type.i2s (embedded struct). This is pointless as these will be always non-NULL. The 's3c_audio_pdata' is always initialized in static memory so it will be zeroed. Additionally the 'type' member was an union with only one member. It is safe to reorganize the structures to get rid of useless union and checks for addresses to fix the coccinelle warning: >> sound/soc/samsung/i2s.c:1270:2-4: ERROR: test of a variable/field address Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-17ARM: s3c64xx: Add DMA slave maps for PL080 devicesSylwester Nawrocki
This patch adds DMA slave map tables to the pl080 devices's platform_data in order to support the new channel request API. A few devices for which there was no DMA support with current code are omitted in the tables. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-07mtd: s3c2410: make ecc mode configurable via platform dataSergio Prado
Removing CONFIG_MTD_NAND_S3C2410_HWECC option and adding a ecc_mode field in the drivers's platform data structure so it can be selectable via platform data. Also setting this field to NAND_ECC_SOFT in all boards using this driver since none of them had CONFIG_MTD_NAND_S3C2410_HWECC enabled. Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-08-16ARM: s3c64xx: Delete unnecessary assignment for the field "owner"Markus Elfring
The field "owner" is set by the core. Thus delete an unneeded initialization. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-08-01Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Improved and new platform support for various SoCs: New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 Improvements: - convert clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: davinci: fix build break because of undeclared dm365_evm_snd_data ARM: s3c64xx: smartq: Avoid sparse warnings ARM: sti: Implement dummy L2 cache's write_sec ARM: STi: Update machine _namestr to be more generic. arm: meson: explicitly select clk drivers ARM: tango: add Suspend-to-RAM support ARM: hisi: consolidate the hisilicon machine entries ARM: tango: fix CONFIG_HOTPLUG_CPU=n build MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry MAINTAINERS: Update BCM63XX entry MAINTAINERS: Add NS2 entry MAINTAINERS: Fix nsp false-positives MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs ARM: clps711x: Switch to MULTIPLATFORM ARM: clps711x: Remove boards support ARM: clps711x: Add basic DT support ARM: clps711x: Reduce static map size ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu ARM: oxnas: Change OX810SE default driver config ...
2016-08-01Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "The cleanup branch keeps going down in size as we've completed a lot of the major legacy platform removals and conversions. A handful of changes this time around, some of the themes or larger sets are: - A bunch of i.MX cleanups around platform detection, init call cleanups - Misc fixes of missing/implicit includes - Removal of ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) ARM: mps2: fix typo ARM: s3c64xx: avoid warning about 'struct device_node' bus: mvebu-mbus: make mvebu_mbus_syscore_ops static bus: mvebu-mbus: fix __iomem on register pointers ARM: tegra: Remove board_init_funcs array ARM: iop: Fix indentation ARM: imx: remove cpu_is_mx*() ARM: imx: remove last call to cpu_is_mx5* ARM: imx: rework mx27_pm_init() call ARM: imx: deconstruct mx3_idle ARM: imx: deconstruct mxc_rnga initialization ARM: imx: remove cpu_is_mx1 check ARM: i.MX: Do not explicitly call l2x0_of_init() ARM: i.MX: system.c: Tweak prefetch settings for performance ARM: i.MX: system.c: Replace magic numbers ARM: i.MX: system.c: Remove redundant errata 752271 code ARM: i.MX: system.c: Convert goto to if statement ARM: Kirkwood: fix kirkwood_pm_init() declaration/type ARM: Kirkwood: make kirkwood_disable_mbus_error_propagation() static ARM: orion5x: make orion5x_legacy_handle_irq static ...
2016-07-14Merge tag 'samsung-soc-4.8-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc Merge "Samsung mach/soc update for v4.8, part 3: from Krzysztof Kozlowski: Just cleanup - fix Sparse warning and constify passed iomem address. * tag 'samsung-soc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c64xx: smartq: Avoid sparse warnings ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu
2016-07-14ARM: s3c64xx: avoid warning about 'struct device_node'Arnd Bergmann
The change to simplify of_platform_populate() had an unintended side-effect of introducing a build warning on s3c64xx: In file included from arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c:18:0: arch/arm/mach-s3c64xx/common.h:27:30: error: 'struct device_node' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] This adds a forward-declaration for the structure name in the header to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 850bea2335e4 ("arm: Remove unnecessary of_platform_populate with default match table") Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-07-11ARM: s3c64xx: smartq: Avoid sparse warningsThierry Reding
The smartq_map_io() and smartq_machine_init() functions are used by both SmartQ 5 and SmartQ 7 machines and exported via the mach-smartq.h header file. However that header file is not included by the mach-smartq.c file that implements them, causing sparse warnings. Include mach-smartq.h from mach-smartq.c to fix these warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-07-06Merge ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB changes into next/socArnd Bergmann
* commit '5c34a4e89c743339f78cafb2f2a826a010f0746a': ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB ARM: uniphier: drop code for old DT binding These cause a harmless conflict with the clps711x multiplatform support, and it's easy to resolve. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-06-23arm: Remove unnecessary of_platform_populate with default match tableKefeng Wang
After patch "of/platform: Add common method to populate default bus", it is possible for arch code to remove unnecessary callers of of_platform_populate with default match table. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Lee Jones <lee@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Kukjin Kim <kgene@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <vireshk@kernel.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-13Merge tag 'samsung-soc-4.8' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/cleanup Samsung mach/soc update for v4.8: 1. Minor cleanups. * tag 'samsung-soc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c24xx: Sort cpufreq tables ARM: SAMSUNG: Fix typos Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-03ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-05-30ARM: SAMSUNG: Fix typosAndrea Gelmini
Fix some language typos in comments. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-20Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: uniphier: rework SMP code to support new System Bus binding ARM: uniphier: add missing of_node_put() ARM: at91: avoid defining CONFIG_* symbols in source code ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 ARM: imx: Make reset_control_ops const ARM: imx: Do L2 errata only if the L2 cache isn't enabled ARM: imx: select ARM_CPU_SUSPEND only for imx6 dmaengine: pxa_dma: fix the maximum requestor line ARM: alpine: select the Alpine MSI controller driver ARM: pxa: add the number of DMA requestor lines dmaengine: mmp-pdma: add number of requestors dma: mmp_pdma: Add the #dma-requests DT property documentation ARM: OMAP2+: Add rtc hwmod configuration for ti81xx ARM: s3c24xx: Avoid warning for inb/outb ARM: zynq: Move early printk virtual address to vmalloc area ARM: DRA7: hwmod: Add custom reset handler for PCIeSS ARM: SAMSUNG: Remove unused register offset definition ARM: EXYNOS: Cleanup header files inclusion drivers: soc: samsung: Enable COMPILE_TEST MAINTAINERS: Add maintainers entry for drivers/soc/samsung ...
2016-03-20Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "A few simple cleanups across multiple platforms, not much standing out: - lpc32xx removes its private implementation of the clk API, after generic code was merged in 4.5 - all unused Makefile.boot files get removed - a number of simplifications for shmobile - asm/clkdev.h gets replaced with the asm-generic version after all mach/clkdev.h implementations are gone" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: Kconfig: Get rid of old comment ARM: shmobile: Consolidate SCU mapping code arm: lpc32xx: remove direct control of GPIOs from shared mach file arm: lpc32xx: remove selected HAVE_IDE arm: lpc32xx: switch to common clock framework ARM: Use generic clkdev.h header ARM: plat-versatile: Remove unused clock.c file ARM: netx: remove redundant "depends on ARCH_NETX" ARM: integrator: remove redundant select in Kconfig ARM: drop unused Makefile.boot of Multiplatform SoCs ARM: mvebu: add missing of_node_put() ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Typo s/MIPDR/MPIDR/ ARM: shmobile: Add includes providing forward declarations ARM: shmobile: rcar-gen2: Make rcar_gen2_dma_contiguous static ARM: mv78xx0: use "depends on" instead of "if" after prompt
2016-02-25ARM: s3c64xx: use "depends on" instead of "if" after promptMasahiro Yamada
This platform recently moved to multi-platform, so missed the global fixup by commit e32465429490 ("ARM: use "depends on" for SoC configs instead of "if" after prompt"). Fix it now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-08ARM: drop unused Makefile.boot of Multiplatform SoCsMasahiro Yamada
The variable "MACHINE" is empty if CONFIG_ARCH_MULTIPLATFORM=y, so these Makefile.boot files are never included. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com> (for Zynq) Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01ARM: s3c64xx: mark regulator init data as unusedArnd Bergmann
The smdk6410 board defines lots of regulator settings, but uses most of them only in certain configurations, and otherwise leaves them without any references, so we get lots of randconfig warnings about them: mach-s3c64xx/mach-smdk6410.c:303:35: error: 'smdk6410_vddarm' defined but not used [-Werror=unused-variable] mach-s3c64xx/mach-smdk6410.c:316:35: error: 'smdk6410_vddint' defined but not used [-Werror=unused-variable] mach-s3c64xx/mach-smdk6410.c:327:35: error: 'smdk6410_vddhi' defined but not used [-Werror=unused-variable] mach-s3c64xx/mach-smdk6410.c:335:35: error: 'smdk6410_vddpll' defined but not used [-Werror=unused-variable] mach-s3c64xx/mach-smdk6410.c:343:35: error: 'smdk6410_vdduh_mmc' defined but not used [-Werror=unused-variable] This marks all regulator_init_data structures in this file as __maybe_unused, indicating that we don't care whether there are any references or not in a given configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-20Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
2016-01-05gpio: generic: factor into gpio_chip structLinus Walleij
The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-31ARM: s3c: simplify s3c_irqwake_{e,}intallow definitionArnd Bergmann
For a long time, gcc has warned about odd configurations on s3c64xx: In file included from arch/arm/plat-samsung/pm.c:34:0: arch/arm/mach-s3c64xx/include/mach/pm-core.h:61:0: warning: "s3c_irqwake_eintallow" redefined #define s3c_irqwake_eintallow ((1 << 28) - 1) In file included from arch/arm/plat-samsung/pm.c:33:0: arch/arm/plat-samsung/include/plat/pm.h:49:0: note: this is the location of the previous definition #define s3c_irqwake_eintallow 0 The definitions of s3c_irqwake_intallow and s3c_irqwake_eintallow are a bit consistent between the various platforms. Things have become easier now that it's only s3c24xx and s3c64xx that use them at all, so I've tried to rearrange the definitions to make it more obvious what is going on. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-12-31ARM: s3c64xx: fix pm-debug compilationArnd Bergmann
I got one randconfig build that failed to compile plat-samsung/pm-debug.c on s3c64xx: In file included from arch/arm/plat-samsung/pm-debug.c:27:0: arch/arm/mach-s3c64xx/include/mach/pm-core.h: In function 's3c_pm_debug_init_uart': arch/arm/mach-s3c64xx/include/mach/pm-core.h:25:25: error: 'S3C_VA_SYS' undeclared (first use in this function) u32 tmp = __raw_readl(S3C_PCLK_GATE); arch/arm/mach-s3c64xx/include/mach/pm-core.h:25:25: note: each undeclared identifier is reported only once for each function it appears in arch/arm/mach-s3c64xx/include/mach/pm-core.h:39:2: error: implicit declaration of function 'udelay' [-Werror=implicit-function-declaration] udelay(10); I have not investigated why this does not show up much more often, I guess the headers are usually included from elsewhere, but adding explicit #include statements is an obvious fix. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-12-01ARM: s3c64xx: allow building without board supportArnd Bergmann
Most of the code for the s3c64xx platform is only used when booting with ATAGS based board files, but not when using device-tree. This tries to identify all the s3c64xx specific code that is unneeded when CONFIG_ATAGS is not set, so we can build a smaller DT-only kernel if configured that way. All board support is still left intact but now depends on the CONFIG_ATAGS symbol that users may intentionally disable. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01ARM: s3c64xx: multiplatform supportArnd Bergmann
After all preparation work is done, we can finally move the Kconfig option for s3c64xx into ARCH_MULTIPLATFORM. This implies allowing SAMSUNG_ATAGS for multiplatform again, but now disallowing the ADC driver below it, as that still has dependencies on header files. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01ARM: s3c64xx: use common debug-ll implementationArnd Bergmann
The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01ARM: s3c64xx: use new adc/touchscreen driverArnd Bergmann
The old ADC and touchscreen drivers are not compatible with multiplatform support, but we can use the exynos-adc driver as a replacement. This changes the common device creation functions for s3c64xx (but not s3c24xx for now) to use the new driver. To do this, we have to pass the interrupt resources in the opposite order and pass the platform data in the adc device node. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01ARM: s3c64xx: enable sparse IRQ supportArnd Bergmann
This is another prerequisite for enabling multiplatform support, and it is the part I am least certain about. I assume it will cause the extra boot message "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated" to be printed, but otherwise work ok. This definitely needs to be tested on real hardware to see if it works. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01ARM: s3c64xx: prepare initcalls for multiplatformArnd Bergmann
In a multiplatform kernel, each initcall is run regardless of the platform it is meant for, so it must not attempt to access SoC-specific registers. This adds 'if (soc_is_s3c64xx)' to all initcalls that are specific to the s3c64xx platform, to prevent them from breaking other platforms once we can build them into a combined kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-12-01ASoC: samsung/smartq: use dynamic registrationArnd Bergmann
As a prerequisite for moving s3c64xx into multiplatform configurations, we need to change the smartq audio driver to stop using hardcoded gpio numbers from the header file, and instead pass the gpio data through platform_data. In order to do that, we also move the code to use module_platform_driver and register the platform device using platform_device_register_simple and register the gpios through the gpiod API. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-21ASoC: samsung: pass filter function as pointerArnd Bergmann
As we are now passing the filter data as pointers to the drivers, we can take the final step and also pass the filter function the same way. I'm keeping this change separate, as there it's less obvious that this is a net win. Upsides of this are: - The ASoC drivers are completely independent from the DMA engine implementation, which simplifies the Kconfig logic and in theory allows the same sound drivers to be built in a kernel that supports different kinds of dmaengine drivers. - Consistency with other subsystems and drivers On the other hand, we have a few downsides: - The s3c24xx-dma driver now needs to be built-in for the ac97 platform device to be instantiated on s3c2440. - samsung_dmaengine_pcm_config cannot be marked 'const' any more because the filter function pointer needs to be set at runtime. This is safe as long we don't have multiple different DMA engines in thet same system at runtime, but is nonetheless ugly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: samsung: pass DMA channels as pointersArnd Bergmann
ARM64 allmodconfig produces a bunch of warnings when building the samsung ASoC code: sound/soc/samsung/dmaengine.c: In function 'samsung_asoc_init_dma_data': sound/soc/samsung/dmaengine.c:53:32: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] playback_data->filter_data = (void *)playback->channel; sound/soc/samsung/dmaengine.c:60:31: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] capture_data->filter_data = (void *)capture->channel; We could easily shut up the warning by adding an intermediate cast, but there is a bigger underlying problem: The use of IORESOURCE_DMA to pass data from platform code to device drivers is dubious to start with, as what we really want is a pointer that can be passed into a filter function. Note that on s3c64xx, the pl08x DMA data is already a pointer, but gets cast to resource_size_t so we can pass it as a resource, and it then gets converted back to a pointer. In contrast, the data we pass for s3c24xx is an index into a device specific table, and we artificially convert that into a pointer for the filter function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New and/or improved SoC support for this release: Marvell Berlin: - Enable standard DT-based cpufreq - Add CPU hotplug support Freescale: - Ethernet init for i.MX7D - Suspend/resume support for i.MX6UL Allwinner: - Support for R8 chipset (used on NTC's $9 C.H.I.P board) Mediatek: - SMP support for some platforms Uniphier: - L2 support - Cleaned up SMP support, etc. plus a handful of other patches around above functionality, and a few other smaller changes" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) ARM: uniphier: rework SMP operations to use trampoline code ARM: uniphier: add outer cache support Documentation: EXYNOS: Update bootloader interface on exynos542x ARM: mvebu: add broken-idle option ARM: orion5x: use mac_pton() helper ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned ARM: sunxi: Add R8 support ARM: digicolor: select pinctrl/gpio driver arm: berlin: add CPU hotplug support arm: berlin: use non-self-cleared reset register to reset cpu ARM: mediatek: add smp bringup code ARM: mediatek: enable gpt6 on boot up to make arch timer working soc: mediatek: Fix random hang up issue while kernel init soc: ti: qmss: make acc queue support optional in the driver soc: ti: add firmware file name as part of the driver Documentation: dt: soc: Add description for knav qmss driver ARM: S3C64XX: Use PWM lookup table for mach-smartq ARM: S3C64XX: Use PWM lookup table for mach-hmt ARM: S3C64XX: Use PWM lookup table for mach-crag6410 ARM: S3C64XX: Use PWM lookup table for smdk6410 ...
2015-10-26Merge tag 'samsung-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Samsung SoC updates for v4.4 - use PWM lookup table with pwm_add_table() for the following boards : s3c24xx h1940 and rx1950 : s3c64xx smdk6410, crag6410, hmt and smartq - document: update bootloader interface on exynos542x * tag 'samsung-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: Documentation: EXYNOS: Update bootloader interface on exynos542x ARM: S3C64XX: Use PWM lookup table for mach-smartq ARM: S3C64XX: Use PWM lookup table for mach-hmt ARM: S3C64XX: Use PWM lookup table for mach-crag6410 ARM: S3C64XX: Use PWM lookup table for smdk6410 ARM: S3C24XX: Use PWM lookup table for mach-rx1950 ARM: S3C24XX: Use PWM lookup table for mach-h1940 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-13ARM: S3C64XX: Use PWM lookup table for mach-smartqThierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-13ARM: S3C64XX: Use PWM lookup table for mach-hmtThierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-13ARM: S3C64XX: Use PWM lookup table for mach-crag6410Thierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-13ARM: S3C64XX: Use PWM lookup table for smdk6410Thierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-27usb: dwc2: rename all s3c_* to dwc2_*Felipe Balbi
this driver has long ago became dwc2.ko with both peripheral and host roles, there's no point in keeping the old function names. Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-01Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A large cleanup branch this release, with a healthy 10k negative line delta. Most of this is removal of legacy (non-DT) support of shmobile platforms. There is also removal of two non-DT platforms on OMAP, and the plat-samsung directory is cleaned out by moving most of the previously shared-location-but-not-actually-shared files from there to the appropriate mach directories instead. There are other sets of changes in here as well: - Rob Herring removed use of set_irq_flags under all platforms and moved to genirq alternatives - a series of timer API conversions to set-state interface - ep93xx, nomadik and ux500 cleanups from Linus Walleij - __init annotation fixes from Nicolas Pitre + a bunch of other changes that all add up to a nice set of cleanups" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits) ARM/fb: ep93xx: switch framebuffer to use modedb only ARM: gemini: Setup timer3 as free running timer ARM: gemini: Use timer1 for clockevent ARM: gemini: Add missing register definitions for gemini timer ARM: ep93xx/timer: Migrate to new 'set-state' interface ARM: nomadik: push accelerometer down to boards ARM: nomadik: move l2x0 setup to device tree ARM: nomadik: selectively enable UART0 on boards ARM: nomadik: move hog code to use DT hogs ARM: shmobile: Fix mismerges ARM: ux500: simplify secondary CPU boot ARM: SAMSUNG: remove keypad-core header in plat-samsung ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx ARM: SAMSUNG: local onenand-core header in mach-s3c64xx ARM: SAMSUNG: local irq-uart header in mach-s3c64xx ARM: SAMSUNG: local backlight header in mach-s3c64xx ARM: SAMSUNG: local ata-core header in mach-s3c64xx ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx ARM: SAMSUNG: local spi-core header in mach-s3c24xx ARM: SAMSUNG: local nand-core header in mach-s3c24xx ...