summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ux500/Makefile
AgeCommit message (Collapse)Author
2013-04-08ARM: ux500: build hotplug.o for ARMv7-aArnd Bergmann
If we try to build this file in a multiplatform configuration with ARMv6 enabled, gas complains about the dsb operation being undefined. Adding -march=armv7-a is safe because that code is only ever run on ux500, which is Cortex-A9. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08ARM: ux500: move PM-related PRCMU functions to machineLinus Walleij
We are trying to decompose and decentralize the code in the DB8500 PRCMU out into subdrivers. The code moved in this patch concerns a group of functions used for decoupling and recoupling the IRQs from the GIC. During sleep and idle the Ux500 system will transfer all IRQ handling to the PRCMU using these functions. Basically we are left with the two alternatives of code placement as: - arch/arm/mach-ux500/pm.c - this because the code is closely related to the GIC, and takes ownership of some of the registers from the PRCMU related to this PM functionality. - drivers/mfd/db8500-prcmu-pm.c - because the code is affecting stuff in the PRCMU register range. But then this code needs to remap and handle GIC registers. This patch implementation is taking the first approach. Currently the cpuidle driver is the only piece of code using this set of functions, but it will later also be used by the suspend/resume code which is currently under review. The header file is moved to: <linux/platform_data/arm-ux500-pm.h> The function prototypes need to be placed in a globally visible header since the CPUidle code is planned to move out to drivers/cpuidle. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Rickard Andersson <rickard.andersson@stericsson.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-22Merge branch 'for-arm-soc-next' of ↵Olof Johansson
git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt * 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500: ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ARM: ux500: Add nodes for the MSP into the HREF Device Tree ARM: ux500: Add all known I2C sub-device nodes to the HREF DT ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled ARM: ux500: Stop registering Audio devices for HREF when DT is enabled ARM: ux500: Add all encompassing sound node to the Snowball Device Tree ARM: ux500: Add nodes for the MSP into Device Tree ARM: ux500: Rename MSP board file to something more meaningful ARM: ux500: Remove platform registration of MSP devices ARM: ux500: Stop registering the MOP500 Audio driver from platform code ARM: ux500: Pass MSP DMA platform data though AUXDATA ARM: ux500: Fork MSP platform registration for step-by-step DT enablement ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree ARM: ux500: Clean-up MSP platform code ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI ARM: ux500: Add UART support to the HREF Device Tree ARM: ux500: Add skeleton Device Tree for the HREF reference board ... + sync to v3.6-rc6
2012-09-20ARM: ux500: Rename MSP board file to something more meaningfulLee Jones
The 'msp' board file does more than just register MSP devices. It also registers some other components necessary to get audio working on ux500 based platforms; such as the PCM and Machine Drivers. For that reason we're changing the filename to be more encompassing - 'audio'. Acked-by: Ola Lilja <ola.o.lilja@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-09-06ARM: ux500: Switch to use common clock frameworkUlf Hansson
Remove machine specific clock implementation and switch to use new common clock framework. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-22Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc power management changes from Olof Johansson: "Power management changes here are mostly for the omap platform, but also include cpuidle changes for ux500 and suspend/resume code for mmp." * tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: OMAP2+: WDTIMER integration: fix !PM boot crash, disarm timer after hwmod reset ARM: OMAP2/3: hwmod data: Add 32k-sync timer data to hwmod database ARM: OMAP4: hwmod_data: Name the common irq for McBSP ports ARM: OMAP4: hwmod data: I2C: add flag for context restore ARM: OMAP3: hwmod_data: Rename the common irq for McBSP ports ARM: OMAP2xxx: hwmod data: add HDQ/1-wire hwmod ARM: OMAP3: hwmod data: add HDQ/1-wire hwmod ARM: OMAP2+: hwmod data: add HDQ/1-wire hwmod shared data ARM: OMAP2+: HDQ1W: add custom reset function ARM: OMAP2420: hwmod data: Add MMC hwmod data for 2420 arm: omap3: clockdomain data: Remove superfluous commas from gfx_sgx_3xxx_wkdeps[] ARM: OMAP2+: powerdomain: Get rid off duplicate pwrdm_clkdm_state_switch() API ARM: OMAP3: clock data: add clockdomain for HDQ functional clock ARM: OMAP3+: dpll: Configure autoidle mode only if it's supported ARM: OMAP2+: dmtimer: cleanup iclk usage ARM: OMAP4+: Add prm and cm base init function. ARM: OMAP2/3: Add idle_st bits for ST_32KSYNC timer to prcm-common header ARM: OMAP3: Fix CM register bit masks ARM: OMAP: clock: convert AM3517/3505 detection/flags to AM35xx ARM: OMAP3: clock data: treat all AM35x devices the same ...
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
2012-05-11ARM: ux500: delete custom pin control systemLinus Walleij
At the beginning of the first patch series I included the custom ux500 pin control system to make sure I could eventually replace it with the standard subsystem driver. So now that we've done so, let's remove it. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02ARM: ux500: add the cpuidle driver for WFI and ARM retentionDaniel Lezcano
This patch adds the cpuidle driver for the ux500 SoC. The boards saves 12mA with these states. It is based on the latest cpuidle consolidation from Robert Lee. The cpu can go to retention only if the other core is in WFI. If the other cpu is in WFI and we decoupled the gic from the cores, then we have the guarantee, it won't be wake up. It is up to the prcmu firmware to recouple the gic automatically after the power state mode is selected. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02ARM: ux500: delete U5500 supportLinus Walleij
This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. The cpu_is_u5500() macros that can read out the CPU ID is left until the next kernel cycle, this makes it possible to merge deletion of dependent drivers without breakage. This also has the upside of removing the mailbox driver which was our only driver that was outside the drivers/* hiearchy, now the machine directory only handles machines and nothing else. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24ARM: ux500: Add support for MSP I2S-devicesOla Lilja
Create devices for the MSP-blocks (MSP0, MSP1, MSP2 and MSP3) and associate it with the correct clocks in the clock-framework. Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24ARM: ux500: implement pin APIRabin Vincent
Implement an API to allow a list of pincfgs to be remuxed to active and sleep modes, for power saving. This is not exported on purpose, because it is not to be called by drivers directly. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-27Merge tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: timer cleanup work" from Arnd Bergmann: "These are split out from the generic soc and driver updates because there was a lot of conflicting work by multiple people. Marc Zyngier worked on simplifying the "localtimer" interfaces, and some of the platforms are touching the same code as they move to device tree based booting. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" * tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) ARM: tegra: select USB_ULPI if USB is selected arm/tegra: pcie: fix return value of function ARM: ux500: fix compilation after local timer rework ARM: shmobile: remove additional __io() macro use ARM: local timers: make the runtime registration interface mandatory ARM: local timers: convert MSM to runtime registration interface ARM: local timers: convert exynos to runtime registration interface ARM: smp_twd: remove old local timer interface ARM: imx6q: convert to twd_local_timer_register() interface ARM: highbank: convert to twd_local_timer_register() interface ARM: ux500: convert to twd_local_timer_register() interface ARM: shmobile: convert to twd_local_timer_register() interface ARM: tegra: convert to twd_local_timer_register() interface ARM: plat-versatile: convert to twd_local_timer_register() interface ARM: OMAP4: convert to twd_local_timer_register() interface ARM: smp_twd: add device tree support ARM: smp_twd: add runtime registration support ARM: local timers: introduce a new registration interface ARM: smp_twd: make local_timer_stop a symbol instead of a #define ARM: mach-shmobile: default to no earlytimer ...
2012-03-13ARM: ux500: convert to twd_local_timer_register() interfaceMarc Zyngier
Add support for the new smp_twd runtime registration interface to the ux500 platforms, and remove the old compile-time support. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-29ARM: ux500: solve some Kconfig messLinus Walleij
First rename the config option MACH_U8500 to MACH_MOP500 because that is what it's obviously all about, this has confused me for the last time. Fix some whitespace in the process. Since the machine descriptors for HREFv60 and snowball are clearly in the file board-mop500.c which only compiles if MACH_MOP500 (former MACH_U8500) is set, select this for the board variants and nothing else. For the MOP500 variants the UIB (user interface board) is probed using I2C so select I2C and I2C_NOMADIK so we know that this probe will always be successful. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-31Merge branch 'stericsson/cleanup' into next/timerArnd Bergmann
The timer and cleanup branches from stericsson conflict, so I'm merging them here. Conflicts: arch/arm/mach-ux500/Makefile arch/arm/mach-ux500/cpu.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-22ARM: ux500: Move timer code to separate fileJonas Aaberg
Just split off the timer code to its own file so we have a more fine-grained file tree. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-30mach-ux500: factor out l2x0 handling codeLinus Walleij
Following mach-imx we break out the l2x0 handling into its own file, avoiding some ifdefs. Also remove unnecessary creation of local pointers when there is already one file-local readily available. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mfd: update DB8500 PRCMU driverMattias Nilsson
This updates the DB8500 PRCMU driver to the latest version available internally. Nominally we would update the dependent CPUfreq driver at the same time but since that is being moved around in this patch set we postpone that by simply deactivating it for the time being. This is a snapshot of the current PRCMU firmware API as it looks right now. The PRCMU firmware is still subject to change. This also updates the CPUfreq driver to a newer version that will utilize the new API. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Sebastien Rault <sebastien.rault@stericsson.com> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: move the DB8500 PRCMU driver to MFDLinus Walleij
We have decided that this function arbiter fits better in the MFD subsystem. Since we need to concatenate the split header files we move it basically like this: mv mach-ux500/prcmu-db8500.c drivers/mfd/db8500-prcmu.c mv mach-ux500/include/mach/prcmu-defs.h include/linux/mfd/db8500-prcmu.h mv mach-ux500/include/mach/prcmu-regs.h drivers/mfd/db8500-prcmu-regs.h mach-ux500/include/mach/prcmu.h >> include/linux/mfd/db8500-prcmu.h rm arch/arm/mach-ux500/include/mach/prcmu.h Then we update different #include statements and Makefile orders etc to make the PRCMU driver compile, link and boot in the new place without really changing any code. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: rename PRCMU driver per SoCLinus Walleij
This renames the prcmu.c file to prcmu-db8500.c so as to indicate that it is for this one SoC. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: move MOP500 pins to separate fileRabin Vincent
Split off pin definitions for the MOP500 board family to its own file. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add platform data for musbMian Yousaf Kaukab
USB resources and DMA40 configurations are dynamically with the data provided in ux500_add_usb() call. Though only DMA40 configurations differ between U8500 and U5500 (USB resource are common between them). Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: delete old keypad board fileLinus Walleij
We register keypads per-UIB now, remove this. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: dynamic UIB (user interface boards) detectionRabin Vincent
Add support for dynamic detection of the UIB used (at the cost of one i2c error on the lesser-used UIB) and also provide an override via a command line parameter if needed. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: fix ux500 build errorSundar Iyer
Include ab8500 regulators for DB8500 SoC by default and fix build issues Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> [Small fixup for changed boardfiles] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-01-10ux500: dynamic SOC detectionRabin Vincent
Dynamically detect the DBx500 SOC an revision based on the ASIC ID. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: rename MOP board KconfigRabin Vincent
Rename the MOP board Kconfig entries to the same name as the machine type, so that the machine_is_*() macros work correctly. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Updated to match changes in the tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-22ux500: rename modem IRQ and MBOX filesLinus Walleij
Suffix the U5500 modem IRQ and MBOX files with *-db5500* so that we clearly know the SoC they belong to, in line with the rest of the files in mach-ux500. Cc: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> Cc: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mach-ux500: move keymaps to new fileSundar Iyer
Move keylayouts to a dedicated file and plug these keylayouts for input platform data. This will make addition of new and custom keylayouts localized. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-09ux500: Add cpufreq support for u8500Martin Persson
Signed-off-by: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: rework gpio registrationRabin Vincent
Rework gpio registration to remove build-time changing macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: Add DMA support for U5500Per Forlin
Add basic DMA configuration for u5500 supporting memcpy. Make way for SDI0 dma support by setting SDI0 to -1, indicating it will be configured in runtime. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: Add eMMC support in U5500.Per Forlin
U5500 now boots from sdi0 (onboard eMMC). Change machine type to U5500. Adjust uart and sdi0 clock rates for u5500. All necessary clocks must be enabled before Linux starts because there is no clock tree support in u5500 yet. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: rework device registrationRabin Vincent
Change the Ux500 devices to be dynamically allocated and added by calling functions instead of referencing structures, thereby allowing 5500 and other derivatives' support to be added without having to duplicate structures, use fixup functions, or use compile-time macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-04ARM: 6417/1: ux500: build configuration for DB5500 mbox and modem irq handlerLinus Walleij
This rounds of the DB5500 mailbox patches by adding the Kconfig options to enable the modem IRQs and mailboxes. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-19ARM: 6392/1: ux500: add ab8500-regulators machine specific dataSundar Iyer
From: Sundar R Iyer <sundar.iyer@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-19ARM: 6391/1: ux500: add CPU hotplug supportSundar Iyer
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6336/1: U8500 PRCMU driverLinus Walleij
Add an initial driver for communicating with the Power, Reset and Clock Management Unit (PRCMU) firmware in U8500. This initial version supports AB8500 communication only. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6335/1: ux500: mop500: register eMMC devicesHanumath Prasad
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-08ARM: 6152/1: ux500 make it possible to disable localtimersLinus Walleij
Currently compilation of ux500 fails if you deselect the kernel feature for localtimers. Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6090/1: ux500: add U5500 supportRabin Vincent
Add basic support for the U5500 platform. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6089/1: ux500: rename cpu-u8500.c to cpu-db8500.cRabin Vincent
Move the DB8500-specific file to a more appropriate name. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6083/1: ux500: put DB8500-specific devices in devices-db8500.cRabin Vincent
Add devices-db8500.c for DB8500-specific devices, starting with SSP0. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6082/1: ux500: put common devices into devices.cRabin Vincent
Introduce devices.c, for placing devices common among Ux500 SoCs. Start with the PL031 device. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6080/1: ux500: move irq and common maps to cpu.cRabin Vincent
Move IRQ initialization and common io mapping setup code to cpu.c, renaming U8500* to UX500* along the way. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28ARM: 5831/1: ARM: U8500 core machine supportSrinidhi Kasagar
Adds core support for the ST-Ericsson U8500 platform. It supports memory mappings, binds to the existing modules like GIC, SCU, TWD and local timers and sets up the infrastructure for the secondary core. Reviewed-by: Alessandro Rubini <rubini@unipv.it> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2024-07-08 10:11:30 +0000