summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap
AgeCommit message (Collapse)Author
2013-06-11omap: mailbox: call request_irq after mbox queues are allocatedSuman Anna
The OMAP mailbox startup code is enabling the interrupt before any of the associated mailbox queues are allocated. Move this code so that the interrupt configuration for a mailbox is together. Signed-off-by: Fernando Guzman Lugo <lugo.fernando@gmail.com> Signed-off-by: Suman Anna <s-anna@ti.com>
2013-05-07Merge tag 'dt-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
2013-05-02Merge branch 'cleanup' into for-linusRussell King
Conflicts: arch/arm/plat-omap/dmtimer.c
2013-05-02ARM: OMAP: use consistent error checkingRussell King
Consistently check errors using the usual method used in the kernel for much of its history. For instance: int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) { int div; div = gpmc_calc_divider(t->sync_clk); if (div < 0) return div; static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) { ... return gpmc_cs_set_timings(cs, t); ..... ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); if (IS_ERR_VALUE(ret)) return ret; So, gpmc_cs_set_timings() thinks any negative return value is an error, but where we check that in higher levels, only a limited range are errors... There is only _one_ use of IS_ERR_VALUE() in arch/arm which is really appropriate, and that is in arch/arm/include/asm/syscall.h: static inline long syscall_get_error(struct task_struct *task, struct pt_regs *regs) { unsigned long error = regs->ARM_r0; return IS_ERR_VALUE(error) ? error : 0; } because this function really does have to differentiate between error return values and addresses which look like negative numbers (eg, from mmap()). So, here's a patch to remove them from OMAP, except for the above. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-09ARM: OMAP2+: Populate DMTIMER errata when using device-treeJon Hunter
Currently the DMTIMER errata flags are not being populated when using device-tree. Add static platform data to populate errata flags when using device-tree. Please note that DMTIMER erratum i767 is applicable to OMAP3-5 devices as well as AM335x devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP2+: Update DMTIMER compatibility propertyJon Hunter
Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: OMAP: Add function to request timer by nodeJon Hunter
Add a function so that OMAP dmtimers can be requested by device-tree node. This allows for devices, such as the internal DSP, or drivers, such as PWM, to reference a specific dmtimer node via the device-tree. Given that there are several APIs available for requesting dmtimers (by ID, by capability or by node) consolidate the code for all these functions into a single helper function that can be used by these request functions. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: OMAP: Force dmtimer restore if context loss is not detectableJon Hunter
When booting with device-tree the function pointer for detecting context loss is not populated. Ideally, the pm_runtime framework should be enhanced to allow a means for reporting context/state loss and we could avoid populating such function pointers altogether. In the interim until a generic non-device specific solution is in place, force a restore of the dmtimer when enabling the timer. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: OMAP: Simplify dmtimer context-loss handlingNeilBrown
The context loss handling in dmtimer appears to assume that omap_dm_timer_set_load_start() or omap_dm_timer_start() and omap_dm_timer_stop() bracket all interactions. Only the first two restore the context and the last updates the context loss counter. However omap_dm_timer_set_load() or omap_dm_timer_set_match() can reasonably be called outside this bracketing, and the fact that they call omap_dm_timer_enable() / omap_dm_timer_disable() suggest that is expected. So if, after a transition into and out of off-mode which would cause the dm timer to loose all state, omap_dm_timer_set_match() is called before omap_dm_timer_start(), the value read from OMAP_TIMER_CTRL_REG will be 'wrong' and this wrong value will be stored context.tclr so a subsequent omap_dm_timer_start() can fail (As the control register is wrong). Simplify this be doing the restore-from-context in omap_dm_timer_enable() so that whenever the timer is enabled, the context is correct. Also update the ctx_loss_count at the same time as we notice it is wrong - these is no value in delaying this until the omap_dm_timer_disable() as it cannot change while the timer is enabled. Signed-off-by: NeilBrown <neilb@suse.de> [jon-hunter@ti.com: minor update to subject and changed variable name] Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-02-28Merge tag 'late-omap' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late OMAP changes from Olof Johansson: "This branch contains changes for OMAP that came in late during the release staging, close to when the merge window opened. It contains, among other things: - OMAP PM fixes and some patches for audio device integration - OMAP clock fixes related to common clock conversion - A set of patches cleaning up WFI entry and blocking. - A set of fixes and IP block support for PM on TI AM33xx SoCs (Beaglebone, etc) - A set of smaller fixes and cleanups around AM33xx restart and revision detection, as well as removal of some dead code (CONFIG_32K_TIMER_HZ)" * tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: omap2: include linux/errno.h in hwmod_reset ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default ARM: OMAP4: hwmod data: Enable AESS hwmod device ARM: OMAP4: hwmod data: Update AESS data with memory bank area ARM: OMAP4+: AESS: enable internal auto-gating during initial setup ASoC: TI AESS: add autogating-enable function, callable from architecture code ARM: OMAP2+: hwmod: add enable_preprogram hook ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init() ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3 ARM: OMAP2+: AM33XX: Update the hardreset API ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files ...
2013-02-24ARM: cleanup: clk_get() error handlingRussell King
Use the correct IS_ERR() to determine if clk_get() returned an error. Set timer->fclk to be an error value initially, and check everywhere using IS_ERR(). This keeps the range of valid values for 'struct clk' consistent. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-21Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform support from Arnd Bergmann: "Converting more ARM platforms to multiplatform support. This time, OMAP gets converted, which is a major step since this is by far the largest platform in terms of code size. The same thing happens to the vt8500 platform." * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: net: cwdavinci_cpdma: export symbols for cpsw remoteproc: omap: depend on OMAP_MBOX_FWK [media] davinci: do not include mach/hardware.h ARM: OMAP2+: Make sure files with omap initcalls include soc.h ARM: OMAP2+: Include soc.h to drm.c to fix compiling ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall ARM: multi_v7_defconfig: add ARCH_ZYNQ ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB arm: vt8500: Remove remaining mach includes arm: vt8500: Convert debug-macro.S to be multiplatform friendly arm: vt8500: Remove single platform Kconfig options ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S ARM: OMAP2+: Add minimal support for booting vexpress ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support ARM: OMAP2+: Disable code that currently does not work with multiplaform ARM: OMAP2+: Add multiplatform debug_ll support ARM: OMAP: Fix dmaengine init for multiplatform ARM: OMAP: Fix i2c cmdline initcall for multiplatform ARM: OMAP2+: Use omap initcalls ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels
2013-02-21Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM SoC bug fixes from Arnd Bergmann: "Bug fixes that did not make it into v3.8, mostly because they were not considered important enough, and in some cases because bugs only show up in combination with other patches destined for 3.9. This includes a few larger patches for GPIO on the Marvell PXA platform and a lot of Samsung specific bug fixes, as well as a series from Arnd to fix older build warnings." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350 scripts/sortextable: silence script output ARM: s3c: i2c: add platform_device forward declaration ARM: mvebu: allow selecting mvebu without Armada XP ARM: pick Versatile by default for !MMU ARM: integrator: fix build with INTEGRATOR_AP off ARM: integrator/versatile: fix NOMMU warnings ARM: sa1100: don't warn about mach/ide.h ARM: shmobile: fix defconfig warning on CONFIG_USB ARM: w90x900: fix legacy assembly syntax ARM: samsung: fix assembly syntax for new gas ARM: disable virt_to_bus/virt_to_bus almost everywhere ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl ARM: SAMSUNG: Silence empty switch warning in fimc-core.h ARM: SAMSUNG: Silence empty switch warning in sdhci.h ARM: msm: proc_comm_boot_wait should not be __init arm: vt8500: Update MAINTAINERS entry for arch-vt8500 ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU ARM: S5PV210: Fix early uart output in fifo mode ...
2013-02-01ARM: OMAP2+: Get rid of custom OMAP_32K_TIMER_HZSantosh Shilimkar
The timekeeping doesn't depend on HZ value in presence of fine grained clocksource and hence there should not be any time drift because of HZ value which was chosen to be divisor of 32768. OMAP has been using HZ = 128 value to avoid any time drift issues because of 32768 HZ clock. But with various measurements performed with HZ = 100, no time drift is observed and it also proves the point about HZ not having impact on time keeping on OMAP. Very informative thread on this topic is here: https://lkml.org/lkml/2013/1/29/435 Special thanks to John Stulz, Arnd Bergmann and Russell King for their valuable suggestions. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: John Stultz <john.stultz@linaro.org> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-02-01ARM: OMAP: Fix the use of uninitialized dma_lch_countChen Gang
'omap_dma_reserve_channels' when used is suppose to be from command. so, it alreay has value before 1st call of omap_system_dma_probe. and it will never be changed again during running (not from ioctl). but 'dma_lch_count' is zero before 1st call of omap_system_dma_probe. so it will be failed for omap_dma_reserve_channels, when 1st call. so, need use 'd->lch_count' instead of 'dma_lch_count' for judging. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-25ARM: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11ARM: OMAP2+: Enable ARCH_MULTIPLATFORM supportTony Lindgren
Flip on multiplatform support for omap2+. No changes to omap2plus_defconfig needed, but please note that you may need to update your custom config files to make sure you have: CONFIG_ARCH_MULTIPLATFORM=y CONFIG_ARCH_MULTI_V7=y CONFIG_ARCH_OMAP2PLUS=y And may need CONFIG_ARCH_MULTI_V6=y if booting omap2 boards. Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11ARM: OMAP2+: Disable code that currently does not work with multiplaformTony Lindgren
We still need to fix up few places for multiplatform support, but that can proceed separately. Fix the issue by making the problem drivers depends !ARCH_MULTIPLATFORM for now. The remaining pieces that are not multiplatform compatible for omap2+ SoCs are: 1. Some drivers are using custom omap_dm_timer calls There are two drivers that are directly usign omap hardware timers for PWM and DSP clocking: drivers/media/rc/ir-rx51.c and drivers/staging/tidspbridge/core/dsp-clock.c. These can be fixed for multiplatform by allowing a minimal set of hardware timers to be accessed, and for some functionality by using the hrtimer framework. 2. Hardware OMAP4_ERRATA_I688 needs to be fixed up This can't be enabled for multiplatform configurations in it's current form. It may be possible to fix it up to do instruction replacement early on during init. Luckily it looks like this errata does not seem to get hit with mainline kernel code alone at least currently. 3. Legacy header needed for omap-sham.c Looks like it still needs mach/irqs.h for omap1 that does not exist for multiplatform systems. Just ifdef it for now. 4. Mailbox is waiting to get moved to drivers Disable it for now to avoid adding a dependency to the mailbox patches. Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi> Cc: Sean Young <sean@mess.org> Cc: "Víctor Manuel Jáquez Leal" <vjaquez@igalia.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> [tony@atomide.com: updated to disable mailbox] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11ARM: OMAP: Fix i2c cmdline initcall for multiplatformTony Lindgren
We only want this initcall to run when the kernel is booted on omap SoCs. Fix the issue by initializing the the initcall from separately for omap1 and omap2+. This fixes the issue for omap2+ multiplatform configs as we are using omap_subsys_initcall there. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-08Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-03ARM: drivers: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03Merge tag 'omap-fixes-a2-for-v3.8-rc' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8-rc2/fixes Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test logs are available here: http://www.pwsan.com/omap/testlogs/prcm_fixes_b_3.8-rc/20130102120724/ The 3730 Beagle XM here has an intermittent failure mounting SD root, but the suspicion right now is that this is due to a failing SD card, rather than any change introduced by these patches. This second version includes a few changes requested by Tony Lindgren.
2013-01-01ARM: OMAP: SRAM: resolve sparse warningsPaul Walmsley
Commit bb77209432873214a796a70a4539e4ebdf3feb54 ("ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2") adds some new sparse warnings: arch/arm/plat-omap/sram.c:43:6: warning: symbol 'omap_sram_push_address' was not declared. Should it be static? arch/arm/plat-omap/sram.c:65:6: warning: symbol 'omap_sram_reset' was not declared. Should it be static? arch/arm/plat-omap/sram.c:73:13: warning: symbol 'omap_map_sram' was not declared. Should it be static? This second version fixes the warnings by including <plat/sram.h>, at Tony's request. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2012-12-30Merge tag 'omap-late-cleanups' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM cleanups for omap from Olof Johansson: "From Tony Lindgren: Here are few more patches to finish the omap changes for multiplatform conversion that are not strictly fixes, but were too complex to do with the dependencies during the merge window. Those are to move of serial-omap.h to platform_data, and the removal of remaining cpu_is_omap macro usage outside mach-omap2. Then there are several trivial fixes for typos and few minimal omap2plus_defconfig updates." * tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON OMAP2: Fix a typo - replace regist with register. ARM/omap: use module_platform_driver macro ARM: OMAP2+: PMU: Remove unused header ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support ARM: OMAP2+: enable devtmpfs and devtmpfs automount ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER ARM: OMAP2+: Drop plat/cpu.h for omap2plus ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage MAINTAINERS: Add an entry for omap related .dts files
2012-12-28ARM: OMAP: 32k counter: resolve sparse warningsPaul Walmsley
Commit 1fe97c8f6a1de67a5f56e029a818903d5bed8017 ("ARM: OMAP: Make OMAP clocksource source selection using kernel param") results in a new warning from sparse: arch/arm/plat-omap/counter_32k.c:86:12: warning: symbol 'omap_init_clocksource_32k' was not declared. Should it be static? This second version fixes this warning by including <plat/counter-32k.h>, at Tony's request. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2012-12-17ARM/omap: use module_platform_driver macroSrinivas Kandagatla
This patch removes some code duplication by using module_platform_driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17ARM: OMAP2+: Drop plat/cpu.h for omap2plusTony Lindgren
The cpu_is_omap macros are now local to arch/arm/mach-omap2 in soc.h and plat/cpu.h can finally be dropped for omap2+. Thanks everybody for help with fixing the drivers. Note that we can now also remove the unused plat/cpu.h from smartreflex.c and isp.c as they will cause compile errors with ARCH_MULTIPLATFORM enabled. Cc: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usageTony Lindgren
Looks like we missed plat-omap/fb.c for cpu_is_omap usage mach-omap2. This is the last user of cpu_is_omap, so let's quickly fix it up so we can finally remove plat/cpu.h for omap2lus. We want to limit cpu_is_omap macro usage to mach-omap2 only so we can make plat/cpu.h private. After this we can finally drop plat/cpu.h for omap2+. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-16Merge branch 'omap-for-v3.8/fixes-for-merge-window' into ↵Tony Lindgren
omap-for-v3.8/fixes-for-merge-window-v2
2012-12-15Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds
Pull fbdev changes from Tomi Valkeinen: "OMAPDSS changes, including: - use dynanic debug prints - OMAP platform dependency removals - Creation of compat-layer, helping us to improve omapdrm - Misc cleanups, aiming to make omadss more in line with the upcoming common display framework Exynos DP changes for the 3.8 merge window: - Device Tree support for Samsung Exynos DP - SW Link training is cleaned up. - HPD interrupt is supported. Samsung Framebuffer changes for the 3.8 merge window: - The bit definitions of header file are updated. - Some minor typos are fixed. - Some minor bugs of s3c_fb_check_var() are fixed. FB related changes for SH Mobile, Freescale DIU Add support for the Solomon SSD1307 OLED Controller" * tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits) OMAPDSS: fix TV-out issue with DSI PLL Revert "OMAPFB: simplify locking" OMAPFB: remove silly loop in fb2display() OMAPFB: fix error handling in omapfb_find_best_mode() OMAPFB: use devm_kzalloc to allocate omapfb2_device OMAPDSS: DISPC: remove dispc fck uses OMAPDSS: DISPC: get dss clock rate from dss driver drivers/video/console/softcursor.c: remove redundant NULL check before kfree() drivers/video: add support for the Solomon SSD1307 OLED Controller OMAPDSS: use omapdss_compat_init() in other drivers OMAPDSS: export dispc functions OMAPDSS: export dss_feat functions OMAPDSS: export dss_mgr_ops functions OMAPDSS: separate compat files in the Makefile OMAPDSS: move display sysfs init to compat layer OMAPDSS: DPI: use dispc's check_timings OMAPDSS: DISPC: add dispc_ovl_check() OMAPDSS: move irq handling to dispc-compat OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c OMAPDSS: move blocking mgr enable/disable to compat layer ... Conflicts: arch/arm/mach-davinci/devices-da8xx.c arch/arm/plat-omap/common.c drivers/media/platform/omap/omap_vout.c
2012-12-14ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.hTony Lindgren
We need to move this file to allow ARM multiplatform configurations to build for omap2+. This can now be done as this file now only contains platform_data. cc: Russell King <linux@arm.linux.org.uk> cc: Alan Cox <alan@linux.intel.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Govindraj.R <govindraj.raja@ti.com> cc: Kevin Hilman <khilman@ti.com> cc: linux-serial@vger.kernel.org Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14ARM: OMAP: Remove debug-devices.cJon Hunter
The OMAP2420 H4 board was the only board using the plat-omap/debug-devices.c code for configuring ethernet support. Now that OMAP2420 H4 has been migrated to use the generic gpmc code for configuring ethernet support, the debug-devices.c file is no longer used and so remove it and its header file. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-13Merge tag 'pm-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC power management and clock changes from Olof Johansson: "This branch contains a largeish set of updates of power management and clock setup. The bulk of it is for OMAP/AM33xx platforms, but also a few around hotplug/suspend/resume on Exynos. It includes a split-up of some of the OMAP clock data into separate files which adds to the diffstat, but gross delta is fairly reasonable." * tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support watchdog: OMAP: fixup for ARM multiplatform support ARM: EXYNOS: Add flush_cache_all in suspend finisher ARM: EXYNOS: Remove scu_enable from cpuidle ARM: EXYNOS: Fix soft reboot hang after suspend/resume ARM: EXYNOS: Add support for rtc wakeup ARM: EXYNOS: fix the hotplug for Cortex-A15 ARM: OMAP2+: omap_device: Correct resource handling for DT boot ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count ARM: OMAP2+: PRM: initialize some PRM functions early ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n ARM: OMAP4: USB: power down MUSB PHY during boot ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP2xxx: clock: drop obsolete clock data ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections ARM: AM33xx: clock: drop obsolete clock data ARM: OMAP3xxx: clk: drop obsolete clock data ...
2012-12-13Merge tag 'omapdss-for-3.8' of git://gitorious.org/linux-omap-dss2/linux ↵Tomi Valkeinen
into for-linus OMAPDSS changes for 3.8, including: - use dynanic debug prints - OMAP platform dependency removals - Creation of compat-layer, helping us to improve omapdrm - Misc cleanups, aiming to make omadss more in line with the upcoming common display framework * tag 'omapdss-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (140 commits) OMAPDSS: fix TV-out issue with DSI PLL Revert "OMAPFB: simplify locking" OMAPFB: remove silly loop in fb2display() OMAPFB: fix error handling in omapfb_find_best_mode() OMAPFB: use devm_kzalloc to allocate omapfb2_device OMAPDSS: DISPC: remove dispc fck uses OMAPDSS: DISPC: get dss clock rate from dss driver OMAPDSS: use omapdss_compat_init() in other drivers OMAPDSS: export dispc functions OMAPDSS: export dss_feat functions OMAPDSS: export dss_mgr_ops functions OMAPDSS: separate compat files in the Makefile OMAPDSS: move display sysfs init to compat layer OMAPDSS: DPI: use dispc's check_timings OMAPDSS: DISPC: add dispc_ovl_check() OMAPDSS: move irq handling to dispc-compat OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c OMAPDSS: move blocking mgr enable/disable to compat layer OMAPDSS: manage framedone irq with mgr ops OMAPDSS: add manager ops ...
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-12-12Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
2012-12-12Merge branch 'omap-serial' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM OMAP serial updates from Russell King: "This series is a major reworking of the OMAP serial driver code fixing various bugs in the hardware-assisted flow control, extending up into serial_core for a couple of issues. These fixes have been done as a set of progressive changes and transformations in the hope that no new bugs will be introduced by this series. The problems are many-fold, from the driver not being informed about updated settings, to the driver not knowing what the intentions of the upper layers are. The first four patches tackle the serial_core layer, allowing it to provide the necessary information to drivers, and the remaining patches allow the OMAP serial driver to take advantage of this. This brings hardware assisted RTS/CTS and XON/OFF flow control into a useful state. These patches have been in linux-next for most of the last cycle; indeed they predate the previous merge window. They've also been posted to the OMAP people." * 'omap-serial' of git://git.linaro.org/people/rmk/linux-arm: (21 commits) SERIAL: omap: fix hardware assisted flow control SERIAL: omap: simplify (2) SERIAL: omap: move xon/xoff setting earlier SERIAL: omap: always set TCR SERIAL: omap: simplify SERIAL: omap: don't read back LCR/MCR/EFR SERIAL: omap: serial_omap_configure_xonxoff() contents into set_termios SERIAL: omap: configure xon/xoff before setting modem control lines SERIAL: omap: remove OMAP_UART_SYSC_RESET and OMAP_UART_FIFO_CLR SERIAL: omap: move driver private definitions and structures to driver SERIAL: omap: remove 'irq_pending' bitfield SERIAL: omap: fix MCR TCRTLR bit handling SERIAL: omap: fix set_mctrl() breakage SERIAL: omap: no need to re-read EFR SERIAL: omap: remove setting of EFR SCD bit SERIAL: omap: allow hardware assisted IXANY mode to be disabled SERIAL: omap: allow hardware assisted rts/cts modes to be disabled SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control SERIAL: core: add hardware assisted h/w flow control support SERIAL: core: add hardware assisted s/w flow control support ... Conflicts: drivers/tty/serial/omap-serial.c
2012-12-11Merge tag 'tty-3.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY/Serial merge from Greg Kroah-Hartman: "Here's the big tty/serial tree set of changes for 3.8-rc1. Contained in here is a bunch more reworks of the tty port layer from Jiri and bugfixes from Alan, along with a number of other tty and serial driver updates by the various driver authors. Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the TTY layer, which is much appreciated by me. All of these have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up some trivial conflicts in the staging tree, due to the fwserial driver having come in both ways (but fixed up a bit in the serial tree), and the ioctl handling in the dgrp driver having been done slightly differently (staging tree got that one right, and removed both TIOCGSOFTCAR and TIOCSSOFTCAR). * tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (146 commits) staging: sb105x: fix potential NULL pointer dereference in mp_chars_in_buffer() staging/fwserial: Remove superfluous free staging/fwserial: Use WARN_ONCE when port table is corrupted staging/fwserial: Destruct embedded tty_port on teardown staging/fwserial: Fix build breakage when !CONFIG_BUG staging: fwserial: Add TTY-over-Firewire serial driver drivers/tty/serial/serial_core.c: clean up HIGH_BITS_OFFSET usage staging: dgrp: dgrp_tty.c: Audit the return values of get/put_user() staging: dgrp: dgrp_tty.c: Remove the TIOCSSOFTCAR ioctl handler from dgrp driver serial: ifx6x60: Add modem power off function in the platform reboot process serial: mxs-auart: unmap the scatter list before we copy the data serial: mxs-auart: disable the Receive Timeout Interrupt when DMA is enabled serial: max310x: Setup missing "can_sleep" field for GPIO tty/serial: fix ifx6x60.c declaration warning serial: samsung: add devicetree properties for non-Exynos SoCs serial: samsung: fix potential soft lockup during uart write tty: vt: Remove redundant null check before kfree. tty/8250 Add check for pci_ioremap_bar failure tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards tty/8250 Add XR17D15x devices to the exar_handle_irq override ...
2012-12-11Merge tag 'mmc-updates-for-3.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.8: Core: - Expose access to the eMMC RPMB ("Replay Protected Memory Block") area by extending the existing mmc_block ioctl. - Add SDIO powered-suspend DT properties to the core MMC DT binding. - Add no-1-8-v DT flag for boards where the SD controller reports that it supports 1.8V but the board itself has no way to switch to 1.8V. - More work on switching to 1.8V UHS support using a vqmmc regulator. - Fix up a case where the slot-gpio helper may fail to reset the host controller properly if a card was removed during a transfer. - Fix several cases where a broken device could cause an infinite loop while we wait for a register to update. Drivers: - at91-mci: Remove obsolete driver, atmel-mci handles these devices now. - sdhci-dove: Allow using GPIOs for card-detect notifications. - sdhci-esdhc: Fix for recovering from ADMA errors on broken silicon. - sdhci-s3c: Add pinctrl support. - wmt-sdmmc: New driver for WonderMedia SD/MMC controllers." * tag 'mmc-updates-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (65 commits) mmc: sdhci: implement the .card_event() method mmc: extend the slot-gpio card-detection to use host's .card_event() method mmc: add a card-event host operation mmc: sdhci-s3c: Fix compilation warning mmc: sdhci-pci: Enable SDHCI_CAN_DO_HISPD for Ricoh SDHCI controller mmc: sdhci-dove: allow GPIOs to be used for card detection on Dove mmc: sdhci-dove: use two-stage initialization for sdhci-pltfm mmc: sdhci-dove: use devm_clk_get() mmc: eSDHC: Recover from ADMA errors mmc: dw_mmc: remove duplicated buswidth code mmc: dw_mmc: relocate where dw_mci_setup_bus() is called from mmc: Limit MMC speed to 52MHz if not HS200 mmc: dw_mmc: use devres functions in dw_mmc mmc: sh_mmcif: remove unneeded clock connection ID mmc: sh_mobile_sdhi: remove unneeded clock connection ID mmc: sh_mobile_sdhi: fix clock frequency printing mmc: Remove redundant null check before kfree in bus.c mmc: Remove redundant null check before kfree in sdio_bus.c mmc: sdhci-imx-esdhc: use more devm_* functions mmc: dt: add no-1-8-v device tree flag ...
2012-12-06mmc: omap_hsmmc: Enable HSPE bit for high speed cardsHebbar, Gururaja
HSMMC IP on AM33xx need a special setting to handle High-speed cards. Other platforms like TI81xx, OMAP4 may need this as-well. This depends on the HSMMC IP timing closure done for the high speed cards. From AM335x TRM (SPRUH73F - 18.3.12 Output Signals Generation): The MMC/SD/SDIO output signals can be driven on either falling edge or rising edge depending on the SD_HCTL[2] HSPE bit. This feature allows to reach better timing performance, and thus to increase data transfer frequency. There are few pre-requisites for enabling the HSPE bit - Controller should support High-Speed-Enable Bit and - Controller should not be using DDR Mode and - Controller should advertise that it supports High Speed in capabilities register and - MMC/SD clock coming out of controller > 25MHz Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-30Merge tag 'tags/omap-for-v3.8/cleanup-multiplatform-no-clock-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/pm2 From Tony Lindgren: Remaining patches to allow omap2+ to build with multiplatform enabled. Unfortunately the DMA header patch had to be redone to avoid adding new multiplatform specific include paths, the other patches are just trivial compile fixes. Note that this does not yet contain the necessary Kconfig changes as we are still waiting for some drivers to get fixed up first. * tag 'tags/omap-for-v3.8/cleanup-multiplatform-no-clock-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support watchdog: OMAP: fixup for ARM multiplatform support Conflicts due to surrounding changes in: arch/arm/mach-omap2/omap_hwmod_2420_data.c arch/arm/mach-omap2/omap_hwmod_2430_data.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-30Merge tag 'omap-for-v3.8/cleanup-headers-iommu-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/headers From Tony Lindgren: Move most of remaining omap iommu code to drivers/iommu. This is needed for the multiplatform kernels as the plat and mach headers cannot be included. These changes were agreed to be merged via the arm-soc tree by Joerg and Ohad as these will cause some merge conflicts with the other related clean-up branches. So omap-for-v3.8/cleanup-headers-iommu should be added as one of the depends branches for arm-soc. * tag 'omap-for-v3.8/cleanup-headers-iommu-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h Conflicts due to surrounding changes in: arch/arm/mach-omap2/omap_hwmod_44xx_data.c drivers/media/platform/omap3isp/ispvideo.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-30Merge tag 'omap-for-v3.8/cleanup-headers-iommu-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: Move most of remaining omap iommu code to drivers/iommu. This is needed for the multiplatform kernels as the plat and mach headers cannot be included. These changes were agreed to be merged via the arm-soc tree by Joerg and Ohad as these will cause some merge conflicts with the other related clean-up branches. So omap-for-v3.8/cleanup-headers-iommu should be added as one of the depends branches for arm-soc. * tag 'omap-for-v3.8/cleanup-headers-iommu-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h Conflicts due to surrounding changes fixed up in: arch/arm/mach-omap2/omap_hwmod_44xx_data.c drivers/media/platform/omap3isp/ispvideo.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-30ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.hTony Lindgren
Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-30Merge tag 'tags/omap-for-v3.8/devel-prcm-signed' into ↵Tony Lindgren
omap-for-v3.8/cleanup-headers-prepare-multiplatform-v3 omap prcm changes via Paul Walmsley <paul@pwsan.com>: Some miscellaneous OMAP hwmod changes for 3.8, along with a PRM change needed for one of the hwmod patches to function. Basic test logs for this branch on top of Tony's omap-for-v3.8/clock branch at commit 558a0780b0a04862a678f7823215424b4e5501f9 are here: http://www.pwsan.com/omap/testlogs/hwmod_devel_a_3.8/20121121161522/ However, omap-for-v3.8/clock at 558a0780 does not include some fixes that are needed for a successful test. With several reverts, fixes, and workarounds applied, the following test logs were obtained: http://www.pwsan.com/omap/testlogs/TEST_hwmod_devel_a_3.8/20121121162719/ which indicate that the series tests cleanly. Conflicts: arch/arm/mach-omap2/cm33xx.c arch/arm/mach-omap2/io.c arch/arm/mach-omap2/prm_common.c
2012-11-29Merge tag 'omap-for-v3.8/cleanup-timer-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Timer clean-up to get us closer to moving timer code to drivers, and to get rid of CONFIG_OMAP_32K_TIMER and rely on the board or devicetree provided timer configuration. Note that these changes are on top of the recent timer fixes. By Jon Hunter (32) and others via Tony Lindgren * tag 'omap-for-v3.8/cleanup-timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (71 commits) ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: OMAP2+: Fix compiler warning for 32k timer ARM: OMAP: Remove unnecessary inclusion of dmtimer.h ARM: OMAP: Add platform data header for DMTIMERs ARM: OMAP: Remove unnecessary omap_dm_timer structure declaration ARM: OMAP2+: Remove unnecessary local variable in timer code ARM: OMAP: Don't store timers physical address ARM: OMAP: Define omap_dm_timer_prepare function as static ARM: OMAP: Clean-up dmtimer reset code ARM: OMAP: Remove __omap_dm_timer_set_source function ARM: OMAP: Remove unnecessary call to clk_get() ARM: OMAP: Add dmtimer interrupt disable function ARM: OMAP: Fix spurious interrupts when using timer match feature ARM: OMAP: Don't restore DMTIMER interrupt status register ARM: OMAP: Don't restore of DMTIMER TISTAT register ARM: OMAP: Fix dmtimer reset for timer1 ARM: OMAP2+: Don't use __omap_dm_timer_reset() ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations ... Change/change conflict in arch/arm/mach-omap2/board-cm-t3517.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-23Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds
git://git.pengutronix.de/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Bugfixes for the i2c subsystem. Except for a few one-liners, there is mainly one revert because of an overlooked dependency. Since there is no linux-next at the moment, I did some extra testing, and all was fine for me." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Fix code to free gpios i2c: omap: ensure writes to dev->buf_len are ordered Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints" i2c: at91: fix SMBus quick command
2012-11-21ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMERIgor Grinberg
CONFIG_OMAP_32K_TIMER is kind of standing on the single zImage way. Make OMAP2+ timer code independant from the CONFIG_OMAP_32K_TIMER setting. To remove the dependancy, several conversions/additions had to be done: 1) Timer initialization functions are named by the platform name and the clock source in use. This also makes it possible to define and use the GPTIMER as the clock source instead of the 32K timer on platforms that do not have the 32K timer ip block or the 32K timer is not wired on the board. Currently, the the timer is chosen in the machine_desc structure on per board basis. Later, DT should be used to choose the timer. 2) Settings under the CONFIG_OMAP_32K_TIMER option are used as defaults and those under !CONFIG_OMAP_32K_TIMER are removed. This removes the CONFIG_OMAP_32K_TIMER on OMAP2+ timer code. 3) Since we have all the timers defined inside machine_desc structure and we no longer need the fallback to gp_timer clock source in case 32k_timer clock source is unavailable (namely on AM33xx), we no longer need the #ifdef around omap2_sync32k_clocksource_init() function. Remove the #ifdef CONFIG_OMAP_32K_TIMER around the omap2_sync32k_clocksource_init() function. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Jon Hunter <jon-hunter@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com>
2012-11-20ARM: OMAP2+: Move iommu/iovmm headers to platform_dataTony Lindgren
Move iommu/iovmm headers from plat/ to platform_data/ as part of the single zImage work. Partially based on an earlier version by Ido Yariv <ido@wizery.com>. Cc: Ido Yariv <ido@wizery.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-20ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.cTony Lindgren
This file should not be in arch/arm. Move it to drivers/iommu to allow making most of the header local to drivers/iommu. This is needed as we are removing plat and mach includes from drivers for ARM common zImage support. Cc: Ido Yariv <ido@wizery.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: linux-media@vger.kernel.org Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Tony Lindgren <tony@atomide.com>