summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
AgeCommit message (Collapse)Author
2021-12-03arm64: dts: allwinner: h6: tanix-tx6: Enable bluetoothJernej Skrabec
Tanix TX6 comes either with RTL8822BS or RTL8822CS wifi+bt combo module. Wifi part is already enabled in tanix DTSI. Let's enable also bluetooth. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-12-03arm64: dts: allwinner: h6: tanix-tx6: Split to DT and DTSIJernej Skrabec
There is another very similar device to Tanix TX6, namely Tanix TX6 mini. Because most of the board design is shared, it makes sense to have common nodes in DTSI file. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-22arm64: dts: allwinner: h6: tanix-tx6: Add I2C nodeJernej Skrabec
Tanix TX6 has a LED display driven by FD650. Currently there is no Linux driver nor any binding for it. However, we can at least provide I2C node in DT, so user space scripts or programs can manually control it. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211121115002.693329-1-jernej.skrabec@gmail.com
2021-11-16arm64: dts: allwinner: h6: tanix-tx6: Add SPDIFJernej Skrabec
Tanix TX6 board has SPDIF connector in form of 3.5 mm jack. Add support for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211115201112.452696-1-jernej.skrabec@gmail.com
2021-07-26arm64: dts: allwinner: h6: tanix-tx6: enable emmcJernej Skrabec
Tanix TX6 has 32 GiB eMMC. Add a node for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210722161220.51181-4-jernej.skrabec@gmail.com
2021-07-26arm64: dts: allwinner: h6: tanix-tx6: Add PIO power suppliesJernej Skrabec
While there is no publicly available schematic of this board, it's not hard to determine voltage of GPIO port C, D and G (only ones which can be set). Port C and G are used for MMC/SDIO communication, so they use 1.8 V power supply. It's not clear if port D is even used, but if it is, it's pretty safe to assume it uses 3.3 V power supply. Value read from PIO Group Withstand Voltage Mode Select register from within pre-installed Android agrees with that assesment. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210722161220.51181-3-jernej.skrabec@gmail.com
2021-07-26arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node namesJernej Skrabec
Regulator node names don't reflect class of the device. Fix that by prefixing names with "regulator-". Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210722161220.51181-2-jernej.skrabec@gmail.com
2020-05-13arm64: dts: allwinner: h6: Enable CPU opp tables for Tanix TX6Clément Péron
Enable CPU opp tables for Tanix TX6. Also add the fixed regulator that provided vdd-cpu-gpu required for CPU opp tables. This voltage has been found using a voltmeter and could be wrong. Tested-by: Jernej Škrabec <jernej.skrabec@gmail.com> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16arm64: dts: allwinner: unify header comment styleClément Péron
Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-11arm64: dts: allwiner: Fix typo in dual licensed SPDX identifierClément Péron
With dual licensed SPDX identifier the "OR" should be uppercase. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-10arm64: dts: allwinner: h6: tanix-tx6: Add IR remote mappingJernej Skrabec
Tanix TX6 box comes with a remote. Add a mapping for it. Suggested-by: Michael Lange <linuxstuff@milaw.biz> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-09arm64: dts: allwinner: h6: Enable USB 3.0 host for Beelink GS1 and Tanix TX6Clément Péron
Enable USB 3.0 phy and host controller. VBUS is directly connected to DCIN 5V and doesn't require to be switched on. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-02arm64: allwinner: h6: Enable GPU node for Tanix TX6Clément Péron
Unlike other H6 boards, Tanix TX6 doesn't have a PMIC so we can enable the GPU without providing a specific power supply. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-08-23arm64: dts: allwinner: h6: Introduce Tanix TX6 boardJernej Skrabec
Tanix TX6 is an Allwinner H6 based TV box, which supports: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 4GiB DDR3 RAM (3GiB useable) - 100Mbps EMAC via AC200 EPHY - Cdtech 47822BS Wifi/BT - 2x USB 2.0 Host and 1x USB 3.0 Host - HDMI port - IR receiver - 64GiB eMMC - 5V/2A DC power supply Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
generated by cgit (git 2.34.1) at 2024-05-09 18:22:46 +0000