summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
AgeCommit message (Collapse)Author
2019-10-07arm64: dts: meson-gxl-s905x-khadas-vim: fix uart_A bluetooth nodeChristian Hewitt
Fixes: dd5297cc8b8b ("arm64: dts: meson-gxl-s905x-khadas-vim enable Bluetooth") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson-gxl-s905x-khadas-vim: fix gpio-keys-polled nodeChristian Hewitt
Fix DTC warnings: arch/arm/dts/meson-gxl-s905x-khadas-vim.dtb: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Fixes: e15d2774b8c0 ("ARM64: dts: meson-gxl: add support for the Khadas VIM board") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-gxl-s905x-khadas-vim: use rc-khadas keymapChristian Hewitt
Swap to the rc-khadas keymap that maps the mouse button to KEY_MUTE. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supplyNeil Armstrong
The hdmi_5v regulator must be enabled to provide power to the physical HDMI PHY and enables the HDMI 5V presence loopback for the monitor. Fixes: b409f625a6d5 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-gxl-khadas-vim: fix GPIO lines namesNeil Armstrong
The gpio line names were set in the pinctrl node instead of the gpio node, at the time it was merged, it worked, but was obviously wrong. This patch moves the properties to the gpio nodes. Fixes: 60795933b709 ("ARM64: dts: meson-gxl-khadas-vim: Add GPIO lines names") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-gxl-s905x-khadas-vim enable BluetoothChristian Hewitt
This enables Bluetooth support for the following models: - Khadas VIM basic (AP6212) using firmware BCM43438A1.hcd - Khadas VIM pro (AP6255) using firmware BCM4345C0.hcd The AP6212 module used on the VIM basic has an ID clash with another device. To get Bluetooth working you either need to apply a kernel patch to drivers/bluetooth/btbcm.c so 0x2209 loads BCM43438A1 or the BCM43438A1.hcd firmware must be renamed to BCM43430A1.hcd. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-07ARM64: dts: amlogic: Convert to new-style SPDX license identifiersNeil Armstrong
Move the SPDX-License-Identifier lines to the top and drop the license splat. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-02-12ARM64: dts: meson: accept MAC addr from u-boot environmentJorge Ramirez-Ortiz
Extend configuring the MAC address from u-boot to all meson boards. I didn't test this changeset but having checked libretech's u-boot tree I believe it should just work. Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-11ARM64: dts: meson-gxl: adjust kvim gpio-line-namesJerome Brunet
TEST_N gpio has been moved so the gpio-line-names of the kvim must be adjusted accordingly Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-08-22Merge tag 'v4.13-rc4' into v4.14/dt64Kevin Hilman
Linux 4.13-rc4
2017-08-22ARM64: dts: meson-gx: Add AO CEC nodesNeil Armstrong
This patch adds the AO CEC node in all the HDMI enabled boards DTS. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-08-01ARM64: dts: meson-gxl-khadas-vim: Add GPIO lines namesNeil Armstrong
This patch describes the GPIO lines usage on the Khadas VIM board. This is useful in the debugfs gpio file and using the cdev gpio API. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: minor whitespace fix] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-07-20ARM64: dts: meson-gx: use specific compatible for the AO pwmsJerome Brunet
Use the specific compatible for AO pwms so the pwms input can be correctly set FDIV4 is not present on the pwm A0, so change kadhas vim input clocks to xtal. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-06-09ARM64: dts: meson-gxl-s905x-khadas-vim: Add HDMI nodesNeil Armstrong
Add HDMI nodes for the Khadas Vim board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-05-17arm64: dts: meson-gxl-s905x-khadas-vim: Fix Wifi node nameAndreas Färber
bcrmf -> brcmf -> wifi Fixes: e15d2774b8c0 ("ARM64: dts: meson-gxl: add support for the Khadas VIM board") Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-03-23ARM64: dts: meson-gxl: add support for the Khadas VIM boardMartin Blumenstingl
The Khadas VIM series consists of two boards which are almost identical: They are both using the same GXL S905X SoC, 100Mbit/s ethernet (through the SoC-internal PHY), 2GB DDR3 memory, a micro-SD card slot, onboard eMMC, Broadcom based SDIO WIFI, 2x USB A and 1x USB Type-C (the latter with OTG support). The red LED is driven by PWM_AO_B (which allows dimming), while the blue LED is managed by the firmware. The differences are: - the VIM Pro has a 16GB eMMC module, while the VIM only has 8GB - the VIM Pro uses an AP6255 a/b/g/n/ac WIFI module, while the VIM comes with an AP6212 b/g/n SDIO WIFI module (the Vim uses an 8GB eMMC module, while The boards are based on Amlogic's GXL S905X P212 reference design, which is why most of the functionality (all MMC controllers and power sequences, IR remote input, the main UART, ADC and ethernet) is simply inherited from meson-gxl-s905x-p212.dtsi. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit (git 2.34.1) at 2024-05-29 23:47:55 +0000