summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
AgeCommit message (Collapse)Author
2023-12-19arm64: dts: amlogic: drop redundant status=okayKrzysztof Kozlowski
New device nodes are enabled by default, so no need for status=okay. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231209124401.93814-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-08-30Merge tag 'pinctrl-v6.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "We have some patches to DTS[I] files in arm and arm64 as well, that were merged here as DT headers were being changed. The most interesting stuff is the Intel Tangier chip support and AMLogic C3 in my opinion. No core changes this time. Drivers: - Intel Tangier SoC pin control support - AMLogic C3 SoC pin control support - Texas Instruments AM654 SoC pin control support - Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin control support - Qualcomm PMX75 and PM7550BA (Power Management) pin control support - Qualcomm PMC8180 and PMC8180C (Power Management) pin control support - DROP the Oxnas driver as there is not enough of community interest to keep carrying this ARM(11) port Enhancements: - Bias control in the MT7986 pin control driver - Misc device tree binding enhancements such as the Broadcom 11351 being converted to YAML - New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use - Clean up some SPDX headers - Handle non-unique devicetree subnode names in two Renesas drivers" * tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl: mlxbf3: Remove gpio_disable_free() pinctrl: use capital "OR" for multiple licenses in SPDX dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes pinctrl: cherryview: fix address_space_handler() argument pinctrl: intel: consolidate ACPI dependency pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper pinctrl: mediatek: assign functions to configure pin bias on MT7986 pinctrl: mediatek: fix pull_type data for MT7981 dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties dt-bindings: pinctrl: Drop 'phandle' properties pinctrl: lynxpoint: Make use of pm_ptr() pinctrl: baytrail: Make use of pm_ptr() pinctrl: intel: Switch to use exported namespace pinctrl: lynxpoint: reuse common functions from pinctrl-intel pinctrl: cherryview: reuse common functions from pinctrl-intel ...
2023-08-07arm64: dts: Replace the IRQ number with the IRQID macro definitionHuqiang Qin
Replacing IRQ numbers with IRQID macro definitions makes node properties easier to understand and also makes GPIO interrupts easier to use. Associated platforms: - Amlogic Meson-G12A - Amlogic Meson-G12B - Amlogic Meson-SM1 Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230724060108.1403662-4-huqiang.qin@amlogic.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-07-31arm64: dts: amlogic: drop redundant status=okay in sound nodesKrzysztof Kozlowski
status=okay is by default. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230731093615.148949-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-08-29arm64: dts: meson-sm1-sei610: Remove 'enable-active-low'Fabio Estevam
The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220827203813.1742715-2-festevam@denx.de
2022-06-10arm64: dts: amlogic: align gpio-key node names with dtschemaKrzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220609113911.380368-7-krzysztof.kozlowski@linaro.org
2022-02-04arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610Christian Hewitt
The BL32/TEE reserved-memory region is now inherited from the common family dtsi (meson-g12-common) so we can drop it from board files. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com
2021-09-21arm64: dts: meson-sm1: Fix the pwm regulator supply propertiesAnand Moon
After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs. Changes help link VDDCPU pwm regulator to 12V regulator supply instead of dummy regulator. [ 11.602281] pwm-regulator regulator-vddcpu: Looking up pwm-supply property in node /regulator-vddcpu failed [ 11.602344] VDDCPU: supplied by regulator-dummy [ 11.602365] regulator-dummy: could not add device link regulator.11: -ENOENT [ 11.602548] VDDCPU: 721 <--> 1022 mV at 1022 mV, enabled Fixes: 88d537bc92ca ("arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi") Fixes: 700ab8d83927 ("arm64: dts: khadas-vim3: add support for the SM1 based VIM3L") Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS") Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts") Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210919202918.3556-4-linux.amoon@gmail.com
2021-02-03arm64: dts: meson: shorten audio card names for alsa compatibilityChristian Hewitt
This patch shortens all audio card model names by dropping the SoC prefix (for conformity) and rewording those that are still longer than alsa's 15 character name limit [0] to avoid userspace config issues. [0] https://github.com/torvalds/linux/blob/master/Documentation/sound/alsa-configuration.rst#common-parameters-for-top-sound-card-modules Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210101063737.26635-1-christianshewitt@gmail.com
2021-02-03arm64: dts: meson: Fix schema warnings for pwm-ledsAlexander Dahl
The node names for devices using the pwm-leds driver follow a certain naming scheme (now). Parent node name is not enforced, but recommended by DT project. Signed-off-by: Alexander Dahl <post@lespocky.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201228163217.32520-5-post@lespocky.de
2020-04-29arm64: dts: meson: fix leds subnodes nameNeil Armstrong
Fix the leds subnode names to match (^led-[0-9a-f]$|led) It fixes: meson-g12b-a311d-khadas-vim3.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-g12b-s922x-khadas-vim3.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-g12b-odroid-n2.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-nanopi-k2.dt.yaml: leds: 'stat' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-nexbox-a95x.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-odroidc2.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-vega-s95-pro.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-vega-s95-meta.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-vega-s95-telos.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-wetek-hub.dt.yaml: leds: 'system' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-wetek-play2.dt.yaml: leds: 'ethernet', 'system', 'wifi' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxl-s905x-libretech-cc.dt.yaml: leds: 'blue', 'system' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxl-s905d-libretech-pc.dt.yaml: leds: 'blue', 'green' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxm-rbox-pro.dt.yaml: leds: 'blue', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxm-s912-libretech-pc.dt.yaml: leds: 'blue', 'green' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-sm1-sei610.dt.yaml: leds: 'bluetooth' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-sm1-khadas-vim3l.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326165958.19274-6-narmstrong@baylibre.com
2020-04-03Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM devicetree updates from Arnd Bergmann: "Most of the commits are for additional hardware support and minor fixes for existing machines for all the usual platforms: qcom, amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap, and versatile. The conversion of binding files to machine-readable yaml format continues, along with fixes found during the validation. Andre Przywara takes over maintainership for the old Calxeda Highbank platform and provides a number of updates. The OMAP2+ platforms see a continued move from platform data into dts files, for many devices that relied on a mix of auxiliary data in addition to the DT description A moderate number of new SoCs and machines are added, here is a full list: - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865 (SM8250) is the current high-end phone chip, and IPQ6018 is a new WiFi-6 router chip. - Mediatek MT8516 application processor SoC for voice assistants, along with the "pumpkin" development board - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an evaluation board. - Kontron "sl28" board family based on NXP LS1028A - Eleven variations of the new i.MX6 TechNexion Pico board, combining the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7 SoM carriers - Three additional variants of the Toradex Colibri board family, all based on versions of the NXP i.MX7. - The Pinebook Pro laptop based on Rockchip RK3399 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on the ST-Ericsson u8500 platform - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on STMicroelectronics stm32mp157 - Renesas M3ULCB starter kit for R-Car M3-W+ - Hoperun HiHope development board with Renesas RZ/G2M - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13" * tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits) ARM: dts: ux500: Fix missing node renames arm64: dts: Revert "specify console via command line" MAINTAINERS: Update Calxeda Highbank maintainership arm: dts: calxeda: Group port-phys and sgpio-gpio items arm: dts: calxeda: Fix interrupt grouping arm: dts: calxeda: Provide UART clock arm: dts: calxeda: Basic DT file fixes arm64: dts: specify console via command line ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node ...
2020-03-17arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus widthNeil Armstrong
The Khadas VIM3 shares the eMMC pins 4 to 7 with the SPI NOR, in order to enable the eMMC and the SPI NOR interface, we need to omit the 4 last pins from the eMMC pinctrl. As it was done for the Khadas VIM2, split the eMMC pinctrls in ctrl, data and ds pins with either 4bits data or 8bits data, and update the current board accordingly. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200313090713.15147-2-narmstrong@baylibre.com
2020-02-29arm64: dts: meson-sm1-sei610: add missing interrupt-namesGuillaume La Roque
add missing "host-wakeup interrupt names Fixes: 30388cc07572 ("arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt") Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200117133423.22602-1-glaroque@baylibre.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-12-09arm64: dts: meson-sm1-sei610: add gpio bluetooth interruptGuillaume La Roque
add gpio irq to support interrupt trigger mode. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-12-09arm64: dts: meson-sm1-sei610: gpio-keys: switch to IRQsKevin Hilman
Switch the GPIO buttons/switches to use interrupts instead of polling. While at it, add the mic mute switch and the power button. Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-17arm64: dts: meson: sei610: enable audioJerome Brunet
Add and enable the audio devices on the sei610. The new FRDDR/TODDR D of the SM1 have been left out on purpose. The plaftorm has 2 possible playback interfaces and 3 possible capture interfaces. 3 pcm interfaces for each direction is enough. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-sm1-sei610: add keep-power-in-suspend property in SDIO nodeNeil Armstrong
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: add stdout-path property backNeil Armstrong
The commit d4609acce187 ("arm64: dts: meson-sm1-sei610: enable DVFS") incorrectly removed the chosen node and the stdout-path property. Add these back. Fixes: d4609acce187 ("arm64: dts: meson-sm1-sei610: enable DVFS") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: enable DVFSNeil Armstrong
This enables DVFS for the Amlogic SM1 based SEI610 board by: - Adding the SM1 SoC OPPs taken from the vendor tree - Selecting the SM1 Clock controller instead of the G12A one - Adding the CPU rail regulator, PWM and OPPs for each CPU nodes. Each power supply can achieve 0.69V to 1.05V using a single PWM output clocked at 666KHz with an inverse duty-cycle. DVFS has been tested by running the arm64 cpuburn at [1] and cycling between all the possible cpufreq translations of the cpu cluster and checking the final frequency using the clock-measurer, script at [2]. [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: enable DVFSNeil Armstrong
This enables DVFS for the Amlogic SM1 based SEI610 board by: - Adding the SM1 SoC OPPs taken from the vendor tree - Selecting the SM1 Clock controller instead of the G12A one - Adding the CPU rail regulator, PWM and OPPs for each CPU nodes. Each power supply can achieve 0.69V to 1.05V using a single PWM output clocked at 666KHz with an inverse duty-cycle. DVFS has been tested by running the arm64 cpuburn at [1] and cycling between all the possible cpufreq translations of the cpu cluster and checking the final frequency using the clock-measurer, script at [2]. [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: add USB supportNeil Armstrong
Add the USB properties for the Amlogic SM1 Based SEI610 Board in order to support the USB DRD Type-C port and the USB3 Type A port. The USB DRD Type-C controller uses the ID signal to toggle the USB role between the DWC3 Host controller and the DWC2 Device controller. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: add HDMI display supportNeil Armstrong
Add the HDMI support nodes for the Amlogic SM1 Based SEI610 Board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-20arm64: dts: add support for SM1 based SEI Robotics SEI610Neil Armstrong
Add support for the Amlogic SM1 Based SEI610 board. The SM1 SoC is a derivative of the G12A SoC Family with : - Cortex-A55 core instead of A53 - more power domains, including USB & PCIe - a neural network co-processor (NNA) - a CSI input and image processor - some changes in the audio complex, thus not yet enabled The SEI610 board is a derivative of the SEI510 board with : - removed ADC based touch button, replaced with 3x GPIO buttons - physical switch disabling on-board MICs - USB-C port for USB 2.0 OTG - On-board FTDI USB2SERIAL port for Linux console Audio, Display and USB support will be added later when support of the corresponding power domains will be added, for now they are kept disabled. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [khilman: fix minor typo regultor -> regulator] Signed-off-by: Kevin Hilman <khilman@baylibre.com>