summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/amlogic
AgeCommit message (Collapse)Author
2023-06-09arm64: dts: add support for C3 based Amlogic AW409Xianwei Zhao
Amlogic C3 is an advanced edge AI processor designed for smart IP camera applications. Add basic support for the C3 based Amlogic AW409 board, which describes the following components: CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console. Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Link: https://lore.kernel.org/r/20230515093237.2203171-1-xianwei.zhao@amlogic.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-05-09arm64: dts: amlogic: add missing cache propertiesKrzysztof Kozlowski
As all level 2 and level 3 caches are unified, add required cache-unified properties to fix warnings like: meson-a1-ad401.dtb: l2-cache0: 'cache-unified' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230421223211.115612-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-04-27Merge tag 'tty-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty/serial driver updates for 6.4-rc1. Nothing major, just lots of tiny, constant, forward development. This includes: - obligatory n_gsm updates and feature additions - 8250_em driver updates - sh-sci driver updates - dts cleanups and updates - general cleanups and improvements by Ilpo and Jiri - other small serial driver core fixes and driver updates All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (87 commits) n_gsm: Use array_index_nospec() with index that comes from userspace tty: vt: drop checks for undefined VT_SINGLE_DRIVER tty: vt: distribute EXPORT_SYMBOL() tty: vt: simplify some cases in tioclinux() tty: vt: reformat tioclinux() tty: serial: sh-sci: Fix end of transmission on SCI tty: serial: sh-sci: Add support for tx end interrupt handling tty: serial: sh-sci: Fix TE setting on SCI IP tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support serial: max310x: fix IO data corruption in batched operations serial: core: Disable uart_start() on uart_remove_one_port() serial: 8250: Reinit port->pm on port specific driver unbind serial: 8250: Add missing wakeup event reporting tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform tty: serial: fsl_lpuart: adjust buffer length to the intended size serial: fix TIOCSRS485 locking serial: make SiFive serial drivers depend on ARCH_ symbols tty: synclink_gt: don't allocate and pass dummy flags tty: serial: simplify qcom_geni_serial_send_chunk_fifo() ...
2023-04-25Merge tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC devicetree updates from Arnd Bergmann: "The devicetree changes overall are again dominated by the Qualcomm Snapdragon platform that weighs in at over 300 changesets, but there are many updates across other platforms as well, notably Mediatek, NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These all add new features for existing machines, as well as new machines and SoCs. The newly added SoCs are: - Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1 chip. - StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its JH7100 predecessor, but with additional CPU cores and a GPU. - Apple M2 as used in current Macbook Air/Pro and Mac Mini gets added, with comparable support as its M1 predecessor. - Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC - Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on the Cortex-A53 and Cortex-A73 cores, respectively. - Qualcomm sa8775p is an automotive SoC derived from the Snapdragon family. Including the initial board support for the added SoC platforms, there are 52 new machines. The largest group are 19 boards industrial embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit) families. Others include: - Two boards based on the Allwinner f1c200s ultra-low-cost chip - Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X) SoC. - The Gl.Inet mv1000 router based on Marvell Armada 3720 - A Wifi/LTE Dongle based on Qualcomm msm8916 - Two robotics boards based on Qualcomm QRB chips - Three Snapdragon based phones made by Xiaomi - Five developments boards based on various Rockchip SoCs, including the rk3588s-khadas-edge2 and a few NanoPi models - The AM625 Beagleplay industrial SBC Another 14 machines get removed: both boards for the obsolete 'oxnas' platform, three boards for the Renesas r8a77950 SoC that were only for pre-production chips, and various chromebook models based on the Qualcomm Sc7180 'trogdor' design that were never part of products" * tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits) arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b arm64: dts: apple: t8112: Add PWM controller arm64: dts: apple: t600x: Add PWM controller arm64: dts: apple: t8103: Add PWM controller arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x ARM: dts: nomadik: Replace deprecated spi-gpio properties ARM: dts: aspeed-g6: Add UDMA node ARM: dts: aspeed: greatlakes: add mctp device ARM: dts: aspeed: greatlakes: Add gpio names ARM: dts: aspeed: p10bmc: Change power supply info arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer arm64: dts: mediatek: mt6795: Add tertiary PWM node arm64: dts: rockchip: add panel to Anbernic RG353 series dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC dt-bindings: arm: fsl: Add chargebyte Tarragon dt-bindings: vendor-prefixes: add chargebyte ...
2023-03-27arm64: dts: meson-g12-common: resolve conflict between canvas & pmuMarc Gonzalez
According to S905X2 Datasheet - Revision 07: DMC_MON area spans 0xff638080-0xff6380c0 DDR_PLL area spans 0xff638c00-0xff638c34 Round DDR_PLL area size up to 0x40 Fixes: 90cf8e21016fa3 ("arm64: dts: meson: Add DDR PMU node") Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230327120932.2158389-3-mgonzalez@freebox.fr Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-27arm64: dts: meson-g12-common: specify full DMC rangeMarc Gonzalez
According to S905X2 Datasheet - Revision 07: DRAM Memory Controller (DMC) register area spans ff638000-ff63a000. According to DeviceTree Specification - Release v0.4-rc1: simple-bus nodes do not require reg property. Fixes: 1499218c80c99a ("arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi") Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230327120932.2158389-2-mgonzalez@freebox.fr Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-09arm64: dts: meson-g12-common: Use the G12A UART compatible stringMartin Blumenstingl
Switch meson-12-common.dtsi to use the Meson G12A specific UART compatible string. This enables the "divide XTAL by 2" divider which improves support for UART attached Bluetooth modules (for example RTL8822CS) running at a baud rate of 1500000. Without dividing XTAL (24MHz) by 2 a baud rate of 1500000 cannot be generated cleanly and the resulting jitter breaks communication with the module. Tested-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230307222651.2106615-4-martin.blumenstingl@googlemail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-07arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO ↵Neil Armstrong
baseboard Add support for both the BananaPi BPI-CM4 module and the BananaPi baseboard which is compatible with the RaspberryPi CM4IO baseboard. The BananaPi BPI-CM4 module follows the CM4 specifications at [1], but with a single HDMI port and a single DSI output. The current CM4IO baseboard DT should work fine on the Raspberry CM4 baseboard and other derivatives baseboards, but proper DT should be written for other baseboards. The split is done so it's easy to describe a new CM4 baseboard, enabling only the necessary HW used on the baseboard. [1] https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf Tested-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230303-topic-amlogic-upstream-bpi-cm4-v2-2-2ecfde76fc4d@linaro.org [narmstrong: fixed typos in commit message] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-07arm64: dts: amlogic: gxl: use gxl mdio multiplexerJerome Brunet
So the far, GXL SoCs were using the generic mmio register based mdio multiplexer. This properly sets one of the glue register but the SoC actually has 3 of those registers. One of them sets the ID under which the internal phy will advertise itself. If nothing sets this register before linux boots (like u-boot), the internal phy path is broken. To address this problem, a dedicated MDIO mux driver has been introduced. Switch to this new driver. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230306151354.132973-1-jbrunet@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-07arm64: dts: meson-a1: add gpio_intc nodeAlexey Romanov
Add gpio interrupt controller node. Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230202141520.40003-1-avromanov@sberdevices.ru Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: meson: gxbb-kii-pro: add initial audio supportChristian Hewitt
Add initial support for HDMI and S/PDIF audio output. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230306121351.1606360-4-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: meson: gxbb-kii-pro: complete the bluetooth nodeChristian Hewitt
Add missing content to the bluetooth node to align it with the content used in (all) other GXBB dts files. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230306121351.1606360-3-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: meson: gxbb-kii-pro: sort and tidy the dtsChristian Hewitt
Alpha-sort the nodes, move the default line in the LED node to where it's normally found, and remove excess spacing. No functional changes. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230306121351.1606360-2-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: meson: adjust order of some compatiblesHeiner Kallweit
During review of a new yaml binding, affecting these dts, it turned out that some compatibles aren't ordered as they should be. Order should be most specific to least specific. Suggested-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/1ce888df-6096-73de-a98a-354d086428d4@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: meson: add support for BananaPi M2S variantsChristian Hewitt
BananaPi M2S ships in Amlogic S922X and A311D variants with the following common specifications: - 16GB eMMC - HDMI 2.1a video - 2x 10/100/1000 Base-T Ethernet (1x RTL8211F, 1x RTL811H) - 2x USB 2.0 ports - 2x Status LED's (green/blue) - 1x Power/Reset button - 1x micro SD card slot - 40-pin GPIO header - PWM fan header - UART header The S992X variant has: - 2GB LPDDR4 RAM The A311D variant has: - 4GB LPDDR4 RAM - NPU (5.0 TOPS) - MIPI DSI header - MIPI CSI header An optional RTL8822CS SDIO WiFi/BT mezzanine is available for both board variants. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230305134512.1596572-3-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: amlogic: meson-gxm-s912-libretech-pc: remove unused ↵Neil Armstrong
pinctrl-names from phy node Fixes the following bindings check error: phy@78000: 'pinctrl-0' is a dependency of 'pinctrl-names' Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-8-93b7e50286e7@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: amlogic: meson-sm1: use correct enable-gpiosNeil Armstrong
Replace enable-gpio by enable-gpios to match the bindings. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-7-93b7e50286e7@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: amlogic: meson-s4: fix apb4 bus node nameNeil Armstrong
Fixes the following bindings check error: apb4@fe000000: $nodename:0: 'apb4@fe000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-6-93b7e50286e7@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: amlogic: meson-g12b-odroid-go-ultra: rename keypad-gpio pinctrl nodeNeil Armstrong
Fixes the following bindings check error: pinctrl@40: keypad-gpio: {...} is not of type 'array' Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-5-93b7e50286e7@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: amlogic: meson-g12b-radxa-zero2: fix pwm clock namesNeil Armstrong
Fixes the following bindings check error: - pwm@2000: clock-names: 'oneOf' conditional failed, one must be fixed: ['clkin4'] is too short 'clkin4' is not one of ['clkin0', 'clkin1'] 'clkin0' was expected - pwm@7000: clock-names: 'oneOf' conditional failed, one must be fixed: ['clkin3'] is too short 'clkin3' is not one of ['clkin0', 'clkin1'] 'clkin0' was expected - pwm@19000: clock-names: 'oneOf' conditional failed, one must be fixed: ['clkin2'] is too short 'clkin2' is not one of ['clkin0', 'clkin1'] 'clkin0' was expected Fixes: d747e7f76a5f ("arm64: dts: meson: add support for Radxa Zero2") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-4-93b7e50286e7@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: remove invalid ↵Neil Armstrong
#gpio-cells in onewire node Fixes the following bindings check errors: - #gpio-cells: [[1]] is not of type 'object' - 'gpio-controller' is a dependency of '#gpio-cells' Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Vyacheslav Bocharov <adeep@lexina.in> Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-3-93b7e50286e7@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: amlogic: meson-gxm-s912-libretech-pc: add simple connector node ↵Neil Armstrong
in fusb302 node Fixes the following bindings check error: fusb302@22: 'connector' is a required property Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-2-93b7e50286e7@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node nameNeil Armstrong
Fixes the following bindings check error: usb-hub: $nodename:0: 'usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-1-93b7e50286e7@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-02-24Merge tag 'usb-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1. Nothing major in here, just lots of good development, including: - Thunderbolt additions for new device support and features - xhci driver updates and cleanups - USB gadget media driver updates (includes media core changes that were acked by the v4l2 maintainers) - lots of other USB gadget driver updates for new features - dwc3 driver updates and fixes - minor debugfs leak fixes - typec driver updates and additions - dt-bindings conversions to yaml - other small bugfixes and driver updates All have been in linux-next for a while with no reported issues" * tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits) usb: dwc3: xilinx: Remove unused of_gpio,h usb: typec: pd: Add higher capability sysfs for sink PDO usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO usb: dwc3: pci: add support for the Intel Meteor Lake-M usb: gadget: u_ether: Don't warn in gether_setup_name_default() usb: gadget: u_ether: Convert prints to device prints usb: gadget: u_serial: Add null pointer check in gserial_resume usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails xhci: host: potential NULL dereference in xhci_generic_plat_probe() dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev of: device: Do not ignore error code in of_device_uevent_modalias of: device: Ignore modalias of reused nodes usb: gadget: configfs: Fix set but not used variable warning usb: gadget: uvc: Use custom strings if available usb: gadget: uvc: Allow linking function to string descs usb: gadget: uvc: Pick up custom string descriptor IDs usb: gadget: uvc: Allow linking XUs to string descriptors usb: gadget: configfs: Attach arbitrary strings to cdev usb: gadget: configfs: Support arbitrary string descriptors ...
2023-02-20Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC DT updates from Arnd Bergmann: "About a quarter of the changes are for 32-bit arm, mostly filling in device support for existing machines and adding minor cleanups, mostly for Qualcomm and Samsung based machines. Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from Rockchips that have been around for a while but were lacking kernel support so far: RV1126 is a Vision SoC with an NPU and is used in the Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for TV boxes and so far only comes with a dts for its refernece design. The other 32-bit boards that were added are two ASpeed AST2600 based BMC boards, the Microchip sam9x60_curiosity development board (Armv5 based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53 and i.MX6ULL. On the RISC-V side, there are fewer patches, but a total of ten new single-board computers based on variations of the Allwinner D1/T113 chip, plus one more board based on Microchip Polarfire. As usual, arm64 has by far the most changes here, with over 700 non-merge changesets, among them over 400 alone for Qualcomm. The newly added SoCs this time are all recent high-end embedded SoCs for various markets, each on comes with support for its reference board: - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones - Qualcomm QDU1000/QRU1000 5G RAN platform - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs - TI J784S4 for industrial and automotive applications In total, there are 46 new arm64 machines: - Reference platforms for each of the five new SoCs - Three Amlogic based development boards - Six embedded machines based on NXP i.MX8MM and i.MX8MP - The Mediatek mt7986a based Banana Pi R3 router - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865) - Two LTE dongles, also based on MSM8916 - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610), SDM450 and SDM632 - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c) - Nine development boards based on Rockchips RK3588, RK3568, RK3566 and RK3328. - Five development machines based on TI K3 (AM642/AM654/AM68/AM69) The cleanup of dtc warnings continues across all platforms, adding to the total number of changes" * tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits) dt-bindings: riscv: correct starfive visionfive 2 compatibles ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings arm64: dts: qcom: qcs404: align RPM G-Link node with bindings arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam arm64: dts: qcom: sc7280: Adjust zombie PWM frequency arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses arm64: dts: qcom: sm7225-fairphone-fp4: move status property down arm64: dts: qcom: pmk8350: Use the correct PON compatible arm64: dts: qcom: sc8280xp-x13s: Enable external display arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks arm64: dts: qcom: sm8350-hdk: enable GPU arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes arm64: dts: qcom: sm8350: finish reordering nodes arm64: dts: qcom: sm8350: move more nodes to correct place arm64: dts: qcom: sm8350: reorder device nodes ...
2023-02-14Merge 6.2-rc8 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-10arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitiveHeiner Kallweit
The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: ef8d2ffedf18 ("ARM64: dts: meson-gxbb: add MMC support") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/76e042e0-a610-5ed5-209f-c4d7f879df44@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-02-10arm64: dts: meson-g12-common: Make mmc host controller interrupts ↵Heiner Kallweit
level-sensitive The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: 4759fd87b928 ("arm64: dts: meson: g12a: add mmc nodes") Tested-by: FUKAUMI Naoki <naoki@radxa.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/27d89baa-b8fa-baca-541b-ef17a97cde3c@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-02-10arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitiveHeiner Kallweit
The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: 221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller") Reported-by: Peter Suti <peter.suti@streamunlimited.com> Tested-by: Vyacheslav Bocharov <adeep@lexina.in> Tested-by: Peter Suti <peter.suti@streamunlimited.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/c00655d3-02f8-6f5f-4239-ca2412420cad@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-27arm64: dts: meson: add support for Radxa Zero2Yuntian Zhang
Radxa Zero2 is a small form factor SBC based on the Amlogic A311D chipset that ships in a number of eMMC configurations: - Amlogic A311D (Quad A73 + Dual A53) CPU - 4GB LPDDR4 RAM - 32/64/128GB eMMC - Mali G52-MP4 GPU - HDMI 2.1 output (micro) - BCM4345 WiFi (2.4/5GHz a/b/g/n/ac) and BT 5.0 - 1x USB 2.0 port - Type C (OTG) - 1x USB 3.0 port - Type C (Host) - 1x micro SD Card slot - 40 Pin GPIO header Signed-off-by: Yuntian Zhang <yt@radxa.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230127150536.3719090-2-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-27arm64: dts: meson: add support for BananaPi M2-ProChristian Hewitt
BPI-M2-PRO is based upon the BPI-M5 design except for a different physical board layout and the following changes: - USB 3.0 ports reduced from 4x to 2x - 3.5mm Combined CVBS/Audio Jack removed - RTL8821BU WiFi/BT module (internal USB connected) Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230127142221.3718184-6-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-27arm64: dts: meson: bananapi-m5: convert dts to dtsiChristian Hewitt
Convert the BPI-M5 dts into meson-sm1-bananapi.dtsi to support the addition of new boards based on the same design. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230127142221.3718184-4-christianshewitt@gmail.com [narmstrong: fixed adc-keys node name] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-27arm64: dts: meson: bananapi-m5: remove redundant status from sound nodeChristian Hewitt
The sound device is enabled by default so remove the redundant status. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230127142221.3718184-3-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-27arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAINChristian Hewitt
For proper warm (re)boot from SD card the BPI-M5 board requires TFLASH_VDD_EN and VDDIO_C pins to be switched to high impedance mode. This can be achieved using OPEN_DRAIN instead of ACTIVE_HIGH to leave the GPIO pins in input mode and retain high state (pin has the pull-up). This change is inspired by meson-sm1-odroid.dtsi where OPEN_DRAIN has been used to resolve similar problems with the Odroid C4 board (TF_IO in the C4 dts is the equivalent regulator). Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts") Suggested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230127142221.3718184-2-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-27arm64: dts: meson: radxa-zero: allow usb otg modeChristian Hewitt
Setting dr_mode to "host" prevents otg which can be useful on a board with limited connectivity options. So don't force host mode. Fixes: 26d1400f7457 ("arm64: dts: amlogic: add support for Radxa Zero") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230127103913.3386435-1-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-27arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an arrayDavid Heidelberg
No functional changes. Adjust to comply with dt-schema requirements and make it possible to validate values. Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20230126193732.69699-1-david@ixit.cz Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2LNeil Armstrong
ODROID-N2L is a variant SBC in small form factor and some peripherals are removed from ODROID-N2PLUS based on S922X SoC. - On-board ethernet is removed - On-board RTC is removed - USB 3.0 hub is removed, so one USB 2.0 and one USB 3.0 host ports are available - Huge heatsink is replaced with 40x40mm heatsink, 5V active heatsink is recommended or a tall passive sink is optional - 3.5mm earjack is removed - IR remote receiver is removed - MIPI DSI port is added new but not yet supported Signed-off-by: Dongjin Kim <tobetter@gmail.com> Link: https://lore.kernel.org/r/20230122-topic-odroid-n2l-upstream-initial-v2-3-8d3fea6d403d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: meson-g12b: move common node into new odroid.dtsiNeil Armstrong
In order to introduce Odroid-N2L which is basically an Odroid-N2+ without some on-board peripherals (Ethernet, RTC, Hub, Jack), move the common nodes into a new meson-g12b-odroid.dtsi which will will be the common dtsi for all the Odroid-N2 derived boards. Link: https://lore.kernel.org/r/20230122-topic-odroid-n2l-upstream-initial-v2-2-8d3fea6d403d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal tripNeil Armstrong
Add an active trip tied to the on-board fan cooling device, which is better than describing it along the passive cooling maps. Fixes: 33b14f663df8 ("arm64: dts: meson: add initial device-tree for ODROID-HC4") Reported-by: Ricardo Pardini <ricardo@pardini.net> Link: https://lore.kernel.org/r/20230124-topic-odroid-hc4-upstream-fix-fan-trip-v1-1-b0c6aa355d93@linaro.org Tested-by: Ricardo Pardini <ricardo@pardini.net> [narmstrong: added Ricardo's tested-by from off-list chat] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: meson: add audio playback to S905X-P212 dtsChristian Hewitt
Add initial support for the HDMI and Analogue i2s audio outputs. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230123065834.2670125-1-christianshewitt@gmail.com [narmstrong: removed useless status property in /sound] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1Christian Hewitt
The Broadcom WiFi/BT SDIO nodes are now inherited from the P212 common dtsi so we can remove them from the VIM1 board dts. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230123065504.2669769-4-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: meson: move pwm_ef node in P212 dtsiChristian Hewitt
Cosmetic-only change to alpha-sort the pwm_ef node. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230123065504.2669769-3-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: meson: add Broadcom WiFi to P212 dtsiChristian Hewitt
The P212 has a combined WiFi/BT module. The BT side is already enabled in the dtsi but the WiFi side is not. Let's enable the WiFi module. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230123065504.2669769-2-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic propertiesNeil Armstrong
Fixes: pmic@1c: '#clock-cells' is a required property pmic@1c: 'switch-supply' does not match any of the regexes: 'pinctrl-[0-9]+' The switch supply is described by vcc9-supply per bindings documentation. Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-14-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node nameNeil Armstrong
Fixes: leds: status: {...} is not of type 'array' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-13-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node nameNeil Armstrong
Fixes: leds: status: {...} is not of type 'array' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-12-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node namesNeil Armstrong
Fixes: adc_keys: 'key' does not match any of the regexes: '^button-', 'pinctrl-[0-9]+' Also fix the invalid "adc_keys" node name. Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-11-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: amlogic: meson-gx-libretech-pc: fix update button nameNeil Armstrong
Fixes: adc-keys: 'update-button' does not match any of the regexes: '^button-', 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-10-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node ↵Neil Armstrong
name Fixes: bus@c8834000: eth-phy-mux: {...} should not be valid under {'type': 'object'} Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-9-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix invalid rtc node nameNeil Armstrong
Fixes: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-[0-9a-f])*$' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-8-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
generated by cgit (git 2.34.1) at 2025-03-23 02:32:16 +0000