| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds the device tree entries for the PWM controller
present on M2 macbooks that is connected to the keyboard backlight.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Adds PWM controller and keyboard backlight bindings for M1 Pro/Max MacBook Pros
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Adds PWM controller and keyboard backlight bindings for M1 MacBooks
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
The PCIe ports are unused (without devices) so disable them instead of
removing them.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
The PCIe ports are unused (without devices) so disable them instead of
removing them.
Fixes: 7c77ab91b33d ("arm64: dts: apple: Add missing M1 (t8103) devices")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
This adds device trees for the following devices:
- Macbook Air (M2, 2022)
- Macbook Pro 13" (M2, 2022)
- Mac mini (M2, 2023)
This brings the hardware support of the machines to the same level as M1
and M1 Pro / Max / Ultra. Supported hardware include NVMe, PCIe, serial,
pinctrl/gpio, I2C, iommu, watchdog, admac, nco, cpufreq, boot
framebuffer for laptop panels and the interrupt controller.
The ethernet LAN device on the M2 Mac mini is the only working PCIe
device. The Wlan/BT devices are powered off and controlled by the not
yet supported SMC. The ASMedia xHCI on the M2 Mac mini requires firmware
to be loaded at startup.
The main missing hardware support to make these devices useful are the
integrated USB 2/3/4 controller, keyboard and trackpad on the laptops
and SMC to power the PCIe Wlan/BT device on.
The M2 Mac mini has currently no working display output. Due to changes
in the display pipeline it is currently not possible to initialize the
HDMI output in the bootloader.
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
|
|
Add bluetooth controller nodes and the required brcm,board-type
properties to be able to select the correct firmware to all board
device trees.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
On t6002 (M1 Ultra), each die contains a self-contained GPU block.
However, only the coprocessor and global management circuitry of the
first die are used. This is what is represented by the "gpu" PS (the
one in die1 is disabled). Nonetheless, this shared component drives the
processing blocks in both dies, and therefore depends on the AFR fabric
being powered up on both dies.
Add an explicit dependency from the GPU block on die0 to AFR on die1,
next to the existing die0 AFR dependency.
Fixes: fa86294eb355 ("arm64: dts: apple: Add initial t6000/t6001/t6002 DTs")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
It looks like the search-and-replace that happened to add die IDs to
the t600x PMGR tree was a little bit too eager on a comment, and nobody
noticed! Let's fix that.
Fixes: fa86294eb355 ("arm64: dts: apple: Add initial t6000/t6001/t6002 DTs")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
The t8103 CPU nodes are missing the cache hierarchy information. The
cache hierarchy on Arm can not be detected and needs to be described in
DT. The OS scheduler can make use of this information for scheduling
decisions.
The cache size information is based on various articles about the
processors. There's also an L3 system level cache (SLC). It's not
described here because SLCs typically have some MMIO interface which
would need to be described.
Based on Rob Herring's patch adding cache properties and nodes for
t600x.
Link: https://lore.kernel.org/asahi/20221122220619.659174-1-robh@kernel.org/
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
All the other DARTs are named foo-dart, so let's keep things consistent.
Fixes: 51979fbb7fb8 ("arm64: dts: apple: t600x: Add MCA and its support")
Fixes: 8a3df85ad87d ("arm64: dts: apple: t8103: Add MCA and its support")
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
The PCIe iommu nodes use "dart" as node names. Replace it with the
the standard "iommu" node name as all other iommu nodes.
Fixes: 7b0b0191a2c7 ("arm64: dts: apple: Add initial t6000/t6001/t6002 DTs")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
The PCIe iommu nodes use "dart" as node names. Replace it with the
the standard "iommu" node name as all other iommu nodes.
Fixes: 3c866bb79577 ("arm64: dts: apple: t8103: Add PCIe DARTs")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add the missing CPU topology/capacity information and the cpufreq nodes,
so we can have CPU frequency scaling and the scheduler has the
information it needs to make the correct decisions.
As with t8103, boost states are commented out pending PSCI/etc support
for deep sleep states.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add the missing CPU topology/capacity information and the cpufreq nodes,
so we can have CPU frequency scaling and the scheduler has the
information it needs to make the correct decisions.
Boost states are commented out, as they are not yet available (that
requires CPU deep sleep support, to be eventually done via PSCI).
The driver supports them fine; the hardware will just refuse to ever
go into them at this time, so don't expose them to users until that's
done.
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
The t600x CPU nodes are missing the cache hierarchy information. The
cache hierarchy on Arm can not be detected and needs to be described in
DT. The OS scheduler can make use of this information for scheduling
decisions.
The cache size information is based on various articles about the
processors. There's also an L3 system level cache (SLC). It's not
described here because SLCs typically have some MMIO interface which
would need to be described.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
There's a shared reset for the ADMAC and MCA peripherals. The MCA node
already describes it, and being a shared reset it is important we
describe it on the ADMAC node too.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add the MCA I2S transceiver and its supporting ADMAC and NCO nodes.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add the MCA I2S transceiver node and its supporting NCO, ADMAC nodes.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
The SIO_ADMA is a power domain of the Audio DMA Controller. In addition
to it, the AUDIO_P domain must be on for the controller's MMIO registers
to be accessible.
On t600x and t8112, AUDIO_P is a parent of SIO_ADMA. On t8103, it isn't
so, at least as far as Apple's firmware goes. To make our life easier,
add the parent-child relationship on t8103 also.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
These are the Mac Studio devices with M1 Max (t6001) and
M1 Ultra (t6002).
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
These are the 14-inch and 16-inch 2021 MacBooks, in both M1 Pro and M1
Max variants (t6000 and t6001).
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
These SoCs are found in Apple devices with M1 Pro (t6000), M1 Max
(t6001) and M1 Ultra (t6002).
t6000 is a cut-down version of t6001, so the former just includes the
latter and disables the missing bits (This is currently just one PMGR
node and all of its domains.
t6002 is two connected t6001 dies. The implementation seems to use
t6001 with blocks disabled (mostly on the second die). MMIO addresses on
the second die have a constant offset. The interrupt controller is
multi-die aware. This setup can be represented in the device tree with
two top level "soc" nodes. The MMIO offset is applied via "ranges" and
devices are included with preproceesor macros to make the node labels
unique and to specify the die number for the interrupt definition.
Device nodes are distributed over dtsi files based on whether they are
present on both dies or just on the first die. The only execption is the
NVMe controller which resides on the second die. Its nodes are in a
separate file.
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
The Apple silicon iMac models were released in April 2021.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add the new module-instance/antenna-sku properties required to select
WiFi firmwares properly to all board device trees.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDoI-0077b3-Dd@rmk-PC.armlinux.org.uk
|
|
This allows using the internal disk attached via NVMe.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Turns out that the APCIE_ST*_SYS domains do hard-depend on ANS2, so
without this they refuse to power up.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Advertise the two PMU nodes for the t8103 SoC.
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The two PMU pseudo interrupts have specific affinities. One set
is affine to the small cores, and the other set affine to the
big ones.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of DT fixes, mostly for mistakes found through
static checking of the dts files again, as well as a couple of minor
changes to address incorrect DT settings.
For i.MX, there is yet another series of devitree changes to update
RGMII delay settings for ethernet, which is an ongoing problem after
some driver changes.
For SoC specific device drivers, a number of smaller fixes came up:
- i.MX SoC identification was incorrectly registered non-i.MX
machines when the driver is built-in
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- a few compile fixes for warnings that get in the way of -Werror
- a string overflow in the scpi firmware driver
- a boot failure with FORTIFY_SOURCE on Rockchips machines
- broken error handling in the AMD TEE driver
- a revert for a tegra reset driver commit that broke HDA"
* tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
soc/tegra: fuse: Fix bitwise vs. logical OR warning
firmware: arm_scpi: Fix string overflow in SCPI genpd driver
soc: imx: Register SoC device only on i.MX boards
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
arm64: dts: imx8mq: remove interconnect property from lcdif
ARM: socfpga: dts: fix qspi node compatible
arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
dt-bindings: i2c: apple,i2c: allow multiple compatibles
arm64: meson: remove COMMON_CLK
arm64: meson: fix dts for JetHub D1
tee: amdtee: fix an IS_ERR() vs NULL bug
arm64: dts: apple: change ethernet0 device type to ethernet
arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
arm64: dts: rockchip: fix poweroff on helios64
arm64: dts: rockchip: fix audio-supply for Rock Pi 4
arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply
arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply
arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge
ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up
...
|
|
We decided to keep SoC nodes sorted by address for sanity; fix a couple
that slipped into the wrong place.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
We now know that this frequency comes from the external reference
oscillator and is used for various SoC blocks, and isn't just a random
24MHz clock, so let's call it something more appropriate.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add the watchdog node which also enables reboot support on the t8103.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
This is required for DCP to boot successfully; it seems if power gating
is allowed, they do not wake up properly.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
As the name indicates, PERST# is active low. Fix the DT description to
match the HW behaviour.
Fixes: ff2a8d91d80c ("arm64: apple: Add PCIe node")
Link: https://lore.kernel.org/r/20211123180636.80558-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
The driver doesn't support these, they shouldn't be in the SoC include
anyway, and we're now configuring this in the bootloader instead. This
also solves the j274 1G/10G Ethernet variant discrepancy, since that
will now be configured properly based on the dynamic ADT property.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Expose the PCI node corresponding to the WiFi device and give it
a 'local-mac-address' property. The bootloader will update it
(m1n1 already has the required feature).
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
This UART is connected to the debug port of the WLAN module. It is
mostly useless, but makes for a good test case for runtime-pm without
having to unbind the console from the main system UART.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
This adds the two PMGR nodes and all known power state subnodes. Since
there are a large number of them, let's put them in a separate file to
include.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
All M1 Mac devices have 2 SoC connected USB-C ports and use cd321x USB
type C port switch and power deliver controllers. I2c bus and addresses
configuration are for all devices equal.
The iMac (24-inch, 2021) has a configuration with 2 additional USB-C
ports (j456) using two additional cd321x controllers.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Apple M1 has at least 5 i2c controllers. i2c0, i2c1 and i2c3 are used
on all M1 Mac devices. The 2020 Mac Mini uses i2c2 and the 13-inch
MacBook Pro uses i2c2 and i2c4.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
This adds support for following Apple M1 devices:
- MacBook Pro (13-inch, M1, 2020)
- MacBook Air (M1, 2020)
- iMac (24-inch 2021)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Required for devices trying to use pinctrl devices as interrupt
controller.
Fixes: 0a8282b83119 ("arm64: apple: Add pinctrl nodes")
Signed-off-by: Janne Grunau <j@jannau.net>
Cc: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Fixes make dtbs_check errors for t8103-j274.dts due to missing pci
properties.
Fixes: e1bebf978151 ("arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address")
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
At the moment, all the Minis running Linux have the same MAC
address (00:10:18:00:00:00), which is a bit annoying.
Expose the PCI node corresponding to the Ethernet device, and
declare a 'local-mac-address' property. The bootloader will update
it (m1n1 already has the required feature). And if it doesn't, then
the default value is already present in the DT.
This relies on forcing the bus number for each port so that the
endpoints connected to them are correctly numbered (and keeps dtc
quiet).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add the interrupt-map properties that are required for INTx
signalling.
Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
PCIe on the Apple M1 (aka t8103) requires the use of IOMMUs (aka
DARTs). Add the three instances that deal with the internal PCIe
ports and route each port's traffic through its DART.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add node corresponding to the apcie,t8103 node in the
Apple device tree for the Mac mini (M1, 2020).
Power domain references and DART (IOMMU) references are left out
at the moment and will be added once the appropriate bindings have
been settled upon.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210921183420.436-5-kettenis@openbsd.org
Signed-off-by: Hector Martin <marcan@marcan.st>
|
