Age | Commit message (Collapse) | Author |
|
samsung,ufs-shareability-reg-offset is not necessary anymore since it
was integrated into the second argument of samsung,sysreg.
Fixes: 31bbac5263aa ("arm64: dts: exynos: add initial support for exynosautov9 SoC")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211102064826.15796-1-chanho61.park@samsung.com
Link: https://lore.kernel.org/r/20211124085042.9649-2-krzysztof.kozlowski@canonical.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
It can be compatible with exynos850's chipid. The SoC has eight chipid
registers that can be used for OTP.
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211021012017.158919-3-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
A new 'chassis-type' root node property has recently been approved for
the device-tree specification.
Add this property for end-user devices (such as laptops,
smartphones and tablets) based on Samsung Exynos ARM64 SoCs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211017101228.19478-1-krzysztof.kozlowski@canonical.com
|
|
SADK(Samsung Automotive Development Kit) is the development kit to
evaluate Exynos Auto v9 SoC. It has 16GB LPDDR4 DRAM and two
256GB Samsung UFS. This patch enables only serial console and ufs0
device.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211012002314.38965-4-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
Add minimal support for ExynosAuto v9 SoC[1].
- Enumarate all pinctrl nodes
- UART with exynos850 compatible
- UFS0 HCI + Phy
Like exynos850, this also uses fixed-rate clock nodes until clock driver
has been supported. The clock nodes are initialized on bootloader stage
thus we don't need to control them so far.
[1]: https://www.samsung.com/semiconductor/minisite/exynos/products/automotiveprocessor/exynos-auto-v9/
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211012002314.38965-3-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
The syscon nodes should come with specific compatible. Correct the
FSYS syscon to fix dtbs_check warnings:
syscon@156f0000: compatible: 'anyOf' conditional failed, one must be fixed:
['syscon'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210820082149.84613-1-krzysztof.kozlowski@canonical.com
|
|
Exynos5433
Align the name of operating-points node to dtschema to fix warnings like:
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml:
opp-table2: $nodename:0: 'opp-table2' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210820081458.83406-1-krzysztof.kozlowski@canonical.com
|
|
The GIC-400 CPU interfaces address range is defined as 0x2000-0x3FFF (by
ARM).
Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Link: https://lore.kernel.org/r/20210805072110.4730-1-krzysztof.kozlowski@canonical.com
|
|
Describe Exynos5433 CPU topology.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210731092409.31496-8-krzysztof.kozlowski@canonical.com
|
|
Add CPU caches information to its dt nodes so that the same is available
to userspace via sysfs. This SoC has 48/32 KB I/D cache for each A57
cores with 2MB L2 cache. And 32/32 KB I/D cache for each A53 cores with
256KB L2 cache.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210622130551.67446-2-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
Add CPU caches information to its dt nodes so that the same is available
to userspace via sysfs. This SoC has 48/32 KB I/D cache
for each cores and 2MB of L2 cache.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210622130551.67446-1-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
The RTC on S2MPS13 PMIC can wakeup the system from suspend to RAM.
Add a generic property for this.
Link: https://lore.kernel.org/r/20210614193309.20248-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210420164943.11152-11-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Fixup white-space issue:
WARNING: please, no spaces at the start of a line
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210315124313.114842-3-krzysztof.kozlowski@canonical.com
|
|
The dtschema expects pclk (APB clock) followed by aclk (AXI/AHB clock):
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml:
slim-sss@11140000: clock-names:0: 'pclk' was expected
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml:
slim-sss@11140000: clock-names:1: 'aclk' was expected
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210212163729.69882-1-krzk@kernel.org
|
|
The S3FWRN5 datasheet describe the interrupt line as rising edge. The
current configuration as level high, could cause spurious interrupts.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210211859.215047-1-krzk@kernel.org
|
|
The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Fixes: 9589f7721e16 ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-8-krzk@kernel.org
|
|
The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-7-krzk@kernel.org
|
|
This property is for consumers of io-channels. Here it is used in
providers of those channels.
Note dt-schema will currently flag this as an error due to a dependency
between this property and io-channels.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20201115192951.1073632-9-jic23@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Use hyphens instead of underscores in the Exynos5433 node names which is
expected by naming convention, multiple dtschema files and pointed out
by dtc W=2 builds.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-6-krzk@kernel.org
|
|
It's not possible to reboot or poweroff Exynos7420 using PSCI. Instead
we need to use syscon reboot/poweroff drivers, like it's done for other
Exynos SoCs. This was confirmed by checking vendor source and testing it
on Samsung Galaxy S6 device based on this SoC.
To be able to use custom restart/poweroff handlers instead of PSCI
functions, we need to correct psci compatible. This also requires us to
provide function ids for CPU_ON and CPU_OFF.
Fixes: fb026cb65247 ("arm64: dts: Add reboot node for exynos7")
Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://lore.kernel.org/r/20201107133926.37187-2-pawel.mikolaj.chmiel@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Exynos7 uses the same syscon reboot and poweroff nodes as other Exynos
SoCs, so instead of duplicating code we can just include common dtsi
file, which already contains definitions of them. After this change,
poweroff node will be also available, previously this dts file did
contain only reboot node.
Fixes: fb026cb65247 ("arm64: dts: Add reboot node for exynos7")
Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://lore.kernel.org/r/20201107133926.37187-1-pawel.mikolaj.chmiel@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add the nodes relevant to PCIe PHY and PCIe support. PCIe is used for the
WiFi interface (Broadcom Limited BCM4358 802.11ac Wireless LAN SoC).
[mszyprow: rewrote commit message, reworked board/generic dts/dtsi split]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201029134017.27400-7-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
New nodes are enabled by default, so status=okay is not needed for them.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-13-krzk@kernel.org
|
|
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-12-krzk@kernel.org
|
|
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-11-krzk@kernel.org
|
|
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20201020115959.2658-27-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Pull ARM Devicetree updates from Olof Johansson:
"As usual, most of the changes are to devicetrees.
Besides smaller fixes, some refactorings and cleanups, some of the new
platforms and chips (or significant features) supported are below:
Broadcom boards:
- Cisco Meraki MR32 (BCM53016-based)
- BCM2711 (RPi4) display pipeline support
Actions Semi boards:
- Caninos Loucos Labrador SBC (S500-based)
- RoseapplePi SBC (S500-based)
Allwinner SoCs/boards:
- A100 SoC with Perf1 board
- Mali, DMA, Cetrus and IR support for R40 SoC
Amlogic boards:
- Libretch S905x CC V2 board
- Hardkernel ODROID-N2+ board
Aspeed boards/platforms:
- Wistron Mowgli (AST2500-based, Power9 OpenPower server)
- Facebook Wedge400 (AST2500-based, ToR switch)
Hisilicon SoC:
- SD5203 SoC
Nvidia boards:
- Tegra234 VDK, for pre-silicon Orin SoC
NXP i.MX boards:
- Librem 5 phone
- i.MX8MM DDR4 EVK
- Variscite VAR-SOM-MX8MN SoM
- Symphony board
- Tolino Shine 2 HD
- TQMa6 SoM
- Y Soft IOTA Orion
Rockchip boards:
- NanoPi R2S board
- A95X-Z2 board
- more Rock-Pi4 variants
STM32 boards:
- Odyssey SOM board (STM32MP157CAC-based)
- DH DRC02 board
Toshiba SoCs/boards:
- Visconti SoC and TPMV7708 board"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
ARM: dts: nspire: Fix SP804 users
arm64: dts: lg: Fix SP804 users
arm64: dts: lg: Fix SP805 clocks
ARM: mstar: Fix up the fallout from moving the dts/dtsi files
ARM: mstar: Add mstar prefix to all of the dtsi/dts files
ARM: mstar: Add interrupt to pm_uart
ARM: mstar: Add interrupt controller to base dtsi
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
arm64: dts: ti: k3-j7200-main: Add USB controller
arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
ARM: dts: hisilicon: add SD5203 dts
ARM: dts: hisilicon: fix the system controller compatible nodes
arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
arm64: dts: zynqmp: Remove undocumented u-boot properties
arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
...
|
|
Device tree nodes should have hyphens instead of underscores. This is
also expected by the bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200903191438.12781-6-krzk@kernel.org
|
|
Few I2S device node properties were not documented and not used by any
of the drivers. Remove them to fix dtbs_check warning:
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: i2s@14d60000:
Additional properties are not allowed ('samsung,supports-rstclr', 'samsung,supports-tdm',
'samsung,supports-6ch', 'samsung,supports-low-rfs' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200903203250.19830-3-krzk@kernel.org
|
|
Since "s3fwrn5" is not a valid vendor prefix, use new GPIO properties
instead of the deprecated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
System register nodes, implementing syscon binding, should use
appropriate compatible. This fixes dtbs_check warnings:
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: syscon@13b80000:
compatible: ['syscon'] is not valid under any of the given schemas
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20200829142501.31478-8-krzk@kernel.org
|
|
"gpios" property is deprecated. Update the Exynos5433 DTS to fix
dtbs_checks warnings like:
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: i2c-gpio-0: 'sda-gpios' is a required property
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: i2c-gpio-0: 'scl-gpios' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20200829142501.31478-7-krzk@kernel.org
|
|
Exynos7
Add @0 unit address to 'soc' node match its 'reg' property and move the
thermal zones out of 'soc' to main root as it this is usually not a
property of a Soc.
This silences DTC warnings:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Warning (simple_bus_reg): /soc/thermal-zones: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add @0 unit address to 'soc' node match its 'reg' property and silence
DTC warning:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:
amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
|
|
LDO12 on Exynos7 Espresso board supplies power to VDDQ_UFS20_RESET, in
case this regulator is OFF, UFS host controller can not send command to
UFS device. To keep this supply ON, set regulator-always-on property for
this LDO.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
always-on to fix this hang.
Fixes: 9589f7721e16 ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso")
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The ARM PMU node is described enough with first compatible so remove the
arm,armv8-pmuv3 to fix dtschema warnings like:
arm-pmu: compatible: Additional items are not allowed ('arm,armv8-pmuv3' was unexpected)
arm-pmu: compatible: ['arm,cortex-a57-pmu', 'arm,armv8-pmuv3'] is too long
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
|
|
Add interrupts property to PWM node on Exynos7 to describe the hardware
fully. No functional change as the interrupts are not used by drivers.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
|
|
Add UFS and UFS-PHY device nods to Exynos7 SoC and Espresso board.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.
"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names. Therefore they should be written with lowercase letters starting
with capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Link: https://lore.kernel.org/r/20200117190305.5257-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The device node name should reflect generic class of a device so rename
the Multi Core Timer node from "mct" to "timer". This will be also in
sync with upcoming DT schema. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Change representation of phandle array as then dt-schema counts number
of its items properly.
Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
dt-schema supports only order of names "aclk", "pclk". Swap some sysmmu
definitions to make them compatible with schema.
Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Commit ef72171b3621 ("arm64: dts: exynos: Remove unneeded address space
mapping for soc node") changed the address and size cells in root node from
2 to 1, but /memory nodes for the affected boards were not updated. This
went unnoticed on Exynos5433-based TM2(e) boards, because they use u-boot,
which updates /memory node to the correct values. On the other hand, the
mentioned commit broke boot on Exynos7-based Espresso board, which
bootloader doesn't touch /memory node at all.
This patch reverts commit ef72171b3621 ("arm64: dts: exynos: Remove
unneeded address space mapping for soc node"), so Exynos5433 and Exynos7
SoCs again matches other ARM64 platforms with 64bit mappings in root
node.
Reported-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: ef72171b3621 ("arm64: dts: exynos: Remove unneeded address space mapping for soc node")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: <stable@vger.kernel.org> # 5.3.x: 72ddcf6aa224 arm64: dts: exynos: Move GPU under /soc node for Exynos5433
Cc: <stable@vger.kernel.org> # 5.3.x: ede87c3a2bdb arm64: dts: exynos: Move GPU under /soc node for Exynos7
Cc: <stable@vger.kernel.org> # 4.18.x
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Mali GPU hardware module is a standard hardware module integrated to
Exynos7 SoCs, so it should reside under the "/soc" node. The only SoC
components which are placed in the DT root, are those, which are a part
of CPUs: like ARM architected timers and ARM performance measurement
units.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Mali GPU hardware module is a standard hardware module integrated to
Exynos5433 SoCs, so it should reside under the "/soc" node. The only SoC
components which are placed in the DT root, are those, which are a part
of CPUs: like ARM architected timers and ARM performance measurement
units.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add nodes for GPU (Mali T760) to Exynos7. Current support for Exynos7
misses a lot, including proper clocks, power domains, frequency and
voltage scaling and cooling. However this still can provide basic GPU
description. Not tested on HW.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add nodes for GPU (Mali T760) to Exynos5433. Missing element is the
cooling device. Not tested on HW.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The XXTI fixed-clock is the input to the SoC therefore it should not be
inside the soc node. This also fixes DTC W=1 warning:
arch/arm64/boot/dts/exynos/exynos7.dtsi:90.17-94.5:
Warning (simple_bus_reg): /soc/xxti: missing or empty reg/ranges property
While moving, change the name of the xxti node to match the generic type
of device (following DeviceTree specification).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|