summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/freescale/imx8mm.dtsi
AgeCommit message (Collapse)Author
2023-12-14arm64: dts: imx8mm: Reduce GPU to nominal speedAdam Ford
When the GPU nodes were added, the GPU_PLL_OUT was configured for 1000MHz, but this requires the SoC to run in overdrive mode which requires an elevated voltage operating point. Since this may run some boards out of spec, the default clock should be set to 800MHz for nominal operating mode. Boards that run at the higher voltage can update their clocks accordingly. Fixes: 4523be8e46be ("arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm: Slow default video_pll1 clock rateAdam Ford
Since commit 8208181fe536 ("clk: imx: composite-8m: Add imx8m_divider_determine_rate") the lcdif controller has had the ability to set the lcdif_pixel rate which propagates up the tree and sets the video_pll1 rate automatically. By setting this value low, it will force the recalculation of video_pll1 to the lowest rate needed by lcdif instead of dividing a larger clock down to the desired clock speed. This has the advantage of being able to lower the video_pll1 rate from 594MHz to 148.5MHz when operating at 1080p. It can go even lower when operating at lower resolutions and refresh rates. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm: Remove video_pll1 clock rate from clk nodeAdam Ford
There are two clock-rate assignments for video_pll1, and the only one it should really have belongs inside the lcdif node, since it's the only consumer of this clock. Remove it from the clk node. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm: Simplify mipi_dsi clocksAdam Ford
The device tree clock structure for the mipi_dsi is unnecessarily redundant. The default clock parent of IMX8MM_CLK_DSI_PHY_REF is already IMX8MM_CLK_24M, so there is no need to set the parent-child relationship between them. The default clock rates for IMX8MM_SYS_PLL1_266M and IMX8MM_CLK_24M are already defined to be 266MHz and 24MHz respectively, so there is no need to define those clock rates. On i.MX8M[MNP] the samsung,pll-clock-frequency is not necessary, because the driver will read it from sclk_mipi which is also already set to 24MHz making it also redundant. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mm: Add CCM interruptsAlexander Stein
Add both CCM interrupts as mentioned in RM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8mm: Add sound-dai-cells to micfil nodeAdam Ford
Per the DT bindings, the micfil node should have a sound-dai-cells entry. Fixes: 3bd0788c43d9 ("arm64: dts: imx8mm: Add support for micfil") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-30Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM devicetree updates from Arnd Bergmann: "These are the devicetree updates for Arm and RISC-V based SoCs, mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and Starfive. Only a few new SoC got added: - TI AM62P5, a variant of the existing Sitara AM62x family - Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55 SoC. - Qualcomm ipq5018 is used in wireless access points - Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone platform. In total, 29 machines get added, which is low because of the summer break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST, Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of these are development and reference boards. Despite not adding a lot of new machines, there are over 700 patches in total, most of which are cleanups and minor fixes" * tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits) arm64: dts: use capital "OR" for multiple licenses in SPDX ARM: dts: use capital "OR" for multiple licenses in SPDX arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved ARM: dts: qcom: apq8064: add support to gsbi4 uart riscv: dts: change TH1520 files to dual license riscv: dts: thead: add BeagleV Ahead board device tree dt-bindings: riscv: Add BeagleV Ahead board compatibles ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs ARM: dts: stm32: support display on stm32f746-disco board ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco ARM: dts: stm32: add pin map for LTDC on stm32f7 ARM: dts: stm32: add ltdc support on stm32f746 MCU arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Add PDC riscv: dts: starfive: fix jh7110 qspi sort order ...
2023-07-30arm64: dts: imx8mm: Drop CSI1 PHY reference clock configurationFabio Estevam
The CSI1 PHY reference clock is limited to 125 MHz according to: i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020 Table 5-1. Clock Root Table (continued) / page 307 Slice Index n = 123 . Currently the IMX8MM_CLK_CSI1_PHY_REF clock is configured to be fed directly from 1 GHz PLL2 , which overclocks them. Instead, drop the configuration altogether, which defaults the clock to 24 MHz REF clock input, which for the PHY reference clock is just fine. Based on a patch from Marek Vasut for the imx8mn. Fixes: e523b7c54c05 ("arm64: dts: imx8mm: Add CSI nodes") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-18arm64: dts: imx8mm: split PCIe rangesKrzysztof Kozlowski
Two entries are expected for PCIe ranges. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-27Merge tag 'usb-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt changes for 6.4-rc1. The "biggest" thing in here is the removal of two obsolete drivers, u132-hcd and ftdi-elan, making this a net-removal of code overall. Other than the driver removals, included in here are: - Thunderbolt updates for new hardware and features - xhci driver updates and fixes - dwc3 driver updates and fixes - gadget core and driver updates and features added - mtu3 driver updates - dwc2 driver fixes and updates - usb-serial driver updates - typec driver updates and fixes - platform remove callback changes - dts updates and conversions - other small changes All have been in linux-next for a while with no reported problems" * tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits) usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API usb: dwc3: gadget: Execute gadget stop after halting the controller media: radio-shark: Add endpoint checks USB: sisusbvga: Add endpoint checks USB: core: Add routines for endpoint checks in old drivers usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk usb: dwc3: core: add support for disabling High-speed park mode dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs usb: mtu3: add optional clock xhci_ck and frmcnt_ck dt-bindings: usb: mtu3: add two optional clocks usb: mtu3: expose role-switch control to userspace usb: mtu3: unlock @mtu->lock just before giving back request usb: mtu3: fix kernel panic at qmu transfer done irq handler usb: mtu3: use boolean return value usb: mtu3: give back request when rx error happens usb: chipidea: fix missing goto in `ci_hdrc_probe` usb: gadget: udc: core: Prevent redundant calls to pullup usb: gadget: udc: core: Invoke usb_gadget_connect only when started usb: typec: ucsi: don't print PPM init deferred errors ...
2023-04-06arm64: dts: imx8mm: Add display pipeline componentsMarek Vasut
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Mini. This makes the DSI display pipeline available on this SoC. Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-29arm64: dts: imx8mm: update usb compatiblePeng Fan
Update usb compatible per binding doc Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20230322052504.2629429-6-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-14arm64: dts: Add i.MX8MM PCIe EP supportRichard Zhu
Add i.MX8MM PCIe EP support. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-26arm64: dts: imx8mm: Deduplicate PCIe clock-names propertyMarek Vasut
Move the PCIe clock-names property from various DTs into SoC dtsi to reduce duplication. In case of a couple of boards, reorder the clock so they match the order in yaml DT bindings. Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mm.dtsi, imx8mm-tqma8mqml-mba8mx.dts Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-09arm64: dts: imx8mm: correct iomuxc-gpr compatiblePeng Fan
The IOMUX Controller General purpose register group are unique almost per SoC, i.MX8MM is not compatible with i.MX6Q. So correct it. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-01arm64: dts: imx8mm: Drop dma-apb interrupt-namesMarek Vasut
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c in Linux kernel does not use it, the property contains duplicate array entries in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get rid of that optional property altogether. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31arm64: dts: imx8m: Add TMU phandle to calibration data in OCOTPMarek Vasut
The TMU TASR, TCALIVn, TRIM registers must be explicitly programmed with calibration values in OCOTP. Add the OCOTP calibration values phandle so the TMU driver can perform this programming. The MX8MM/MX8MN TMUv1 uses only one OCOTP cell, while MX8MP TMUv2 uses 4. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31arm64: dts: imx8m: Document the fuse address calculationMarek Vasut
The mapping from OCOTP reg DT property to Fusemap Descriptions Table in the datasheet is often unclear. Add a comment to make it easier to find out how it works. No functional change. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31arm64: dts: imx8m: Align SoC unique ID node unit addressMarek Vasut
Align the SoC unique ID DT node unit address with its reg property. Reviewed-by: Peng Fan <peng.fan@nxp.com> Fixes: cbff23797fa1 ("arm64: dts: imx8m: add NVMEM provider and consumer to read soc unique ID") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-12Merge tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC DT updates from Arnd Bergmann: "The devicetree changes contain exactly 1000 non-merge changesets, including a number of new arm64 SoC variants from Qualcomm and Apple, as well as the Renesas r9a07g043f/u chip in both arm64 and riscv variants. While we have occasionally merged support for non-arm SoCs in the past, this is now the normal path for riscv devicetree files. The most notable changes, by SoC platform, are: - The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips now have initial support. This is particularly nice as I am typing this on a T6002 Mac Studio with only a small number of driver patches. - Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662), SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670 (Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon 650) are all mobile phone chips that are closely related to others we already support. Adding those helps support more phones and we add several models from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3, 3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and Google (Pixel 3a). There are also new variants of the Herobrine and Trogdor chromebook motherboards. SA8540P is an automotive SoC used in the Qdrive-3 development platform - Rockchips gains no new SoC variants, but a lot of new boards: three mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two more Anbernic gaming systems based on RK3566 and a number of other RK356x based single-board computers. - Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as the newly added RZ/Five is based on the same design, this now gets reorganized in order to share most of the dts description between the two and add the RZ/Five SMARC EVK board support. Aside from that, there are the usual changes all over the tree: - New boards on other platforms contain two ASpeed BMC users, two Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based Kobo Aura2 ebook reader, two i.MX8 based development boards, two Uniphier Pro5 development boards, the STM32MP1 testbench board from DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek Helio X10 based Sony Xperia M5 phone. - The Starfive JH7100 source gets reorganized in order to support the VisionFive V1 board. - Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI, ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton, Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500, spear, ... The treewide cleanups now have a lot of fixes for cache nodes and other binding violoations. - Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and Renesas platforms, adding a lot more on-chip device support - A rework of the way that DTB overlays are built" * tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits) arm64: dts: apple: t6002: Fix GPU power domains arm64: dts: apple: t600x-pmgr: Fix search & replace typo arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes arm64: dts: apple: Rename dart-sio* to sio-dart* arch: arm64: apple: t600x: Use standard "iommu" node name arch: arm64: apple: t8103: Use standard "iommu" node name ARM: dts: socfpga: Fix pca9548 i2c-mux node name dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define dt-bindings: iio: adc: qcom,spmi-vadc: extend example arm64: dts: qcom: sc8280xp: fix UFS DMA coherency arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI arm64: dts: qcom: sm8450: align MMC node names with dtschema arm64: dts: qcom: sc7180-trogdor: use generic node names arm64: dts: qcom: sm8450-hdk: add sound support arm64: dts: qcom: sm8450: add Soundwire and LPASS ...
2022-11-15arm64: dts: Update cache properties for freescalePierre Gondois
The DeviceTree Specification v0.3 specifies that the cache node 'compatible' and 'cache-level' properties are 'required'. Cf. s3.8 Multi-level and Shared Cache Nodes The 'cache-unified' property should be present if one of the properties for unified cache is present ('cache-size', ...). Update the Device Trees accordingly. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Chester Lin <clin@suse.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: imx8mm: Fix NAND controller size-cellsMarek Vasut
The NAND controller size-cells should be 0 per DT bindings. Fix the following warning produces by DT bindings check: " nand-controller@33002000: #size-cells:0:0: 0 was expected nand-controller@33002000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) " Fix the missing space in node name too. Fixes: a05ea40eb384e ("arm64: dts: imx: Add i.mx8mm dtsi support") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: imx8mm: correct usb power domainsLi Jun
pgc_otg1/2 is actual the power domain of usb PHY, usb controller is in hsio power domain, and pgc_otg1/2 is required to be powered up to detect usb remote wakeup, so move the pgc_otg1/2 power domain to the usb phy node. Fixes: 01df28d80859 ("arm64: dts: imx8mm: put USB controllers into power-domains") Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsioLi Jun
pgc_otg1/2 are independent power domain of hsio, they for usb phy, so remove hsio power domain dependency from its node. Fixes: d39d4bb15310 ("arm64: dts: imx8mm: add GPC node") Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-24arm64: dts: imx8m: align anatop with bindingsPeng Fan
The CCM ANALOG module is used for generate PLLs, align the node with DT bindings Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20arm64: dts: imx8m: Pass a label to the soc nodeFabio Estevam
Pass a label to the 'soc' node to make it easier to reference it from other devicetree files. U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19arm64: dts: imx8m: Disable job ring 0 nodesFabio Estevam
Now that the JR0 reservation is done in both upstream (v2.7) and downstream (NXP lf_v2.4) TF-A versions, the kernel fails to initialize the job ring 0: # dmesg | grep jr caam_jr 30901000.jr: failed to flush job ring 0 caam_jr: probe of 30901000.jr failed with error -5 Disable the sec_jr0 nodes by default to avoid the caam_jr probe error. Suggested-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-14arm64: dts: fsl: adjust whitespace around '='Krzysztof Kozlowski
Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-14arm64: dts: imx8mm: Add SNVS LPGPRMarek Vasut
Add SNVS LPGPR bindings to MX8M Mini, the LPGPR is used to store boot counter. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: devicetree@vger.kernel.org To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-05arm64: dt: imx8mm: support pwm polarity inversionMarkus Niebel
The i.MX8M Mini has the same PWM IP as i.MX6 / i.MX7. This IP and the driver supporting pwm polarity inversion. Switch CPU device tree fragment to use 3 pwm-cells and correct board device trees. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-03-23Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM devicetree updates from Arnd Bergmann: "After a somewhat quiet 5.17 release, the size of the DT changes is a bit larger again. There are nine new SoC that get added, all of them related to existing platforms: - Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB - Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet - Microchip Lan966 networking SoC and it evaluation board - Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus 5X and Fairphone FP3 phones - Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along with their evaluation boards - Samsung Exynos 850 phone SoC and reference board - Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone - Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived from the Samsung Exynos family. - TI K3/AM62 SoC and reference board Support for additional functionality in existing dts files is added all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom. Samsung has a rework for its pinctrl schema that is a bit tricky and requires driver changes to be included here. A few more platforms only have smaller cleanups and DT Schema fixes, this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno. The new machines are really too many to list, but I'll do it anyway: Allwinner: - A20-Marsboard development board Amlogic: - Amediatek X96-AIR (Amlogic S905X3) - CYX A95XF3-AIR (Amlogic S905X3) - Haochuangy H96-Max (Amlogic S905X3) - Amlogic AQ222 (Amlogic S4) - OSMC Vero 4K+ (Amlogic S905D) Arm Juno: - Separate DT depending on SCMI firmware version Aspeed: - Quanta S6Q BMC (AST2600) - ASRock ROMED8HM3 (AST2500) Broadcom: - Raspberry Pi Zero 2 W Marvell MVEBU/Armada: - Ctera C200 V1 NAS (kirkwood) - Ctera C200 V2 NAS (armada-370) Mstar: - DongShanPiOne, a low-end embedded board - Miyoo Mini handheld game console NXP i.MX: - Numerous i.MX8M Mini based boards in even more variations, but none based on other SoCs this time: Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and Gateworks GW7903 Qualcomm: - Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3) - SHIFT6mq phone (Snapdragon 845) - Samsung Galaxy Book2 (Snapdragon 850) - Snapdragon 8 Gen 1 Hardware Development Kit TI OMAP: - SanCloud BeagleBone Enhanced WiFi Rockchip: - Pine64 PineNote ereader tablet (rk356x) - Bananapi-R2-Pro (rk356x) STM32: - emtrion emSBS-Argon embedded board (stm32mp157c)" * tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits) arm64: dts: n5x: drop invalid property and fix edac node name arm64: dts: fsd: Add the MCT support arm64: dts: stingray: Fix spi clock name arm64: dts: ns2: Fix spi clock name ARM: dts: rockchip: Update regulator name for PX3 ARM: dts: rockchip: Add #clock-cells value for rk805 arm64: dts: rockchip: Add #clock-cells value for rk805 arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808 arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly ARM: dts: at91: sama7g5: Add NAND support ARM: dts: at91: sama7g5: add eic node ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15 arm64: dts: lg: align pl330 node name with dtschema arm64: dts: lg: add dma-cells to pl330 node arm64: dts: juno: align pl330 node name with dtschema arm64: dts: broadcom: Fix sata nodename arm64: dts: n5x: add sdr edac support arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node dt-bindings: usb: dwc2: add disable-over-current ...
2022-02-14arm64: dts: imx8mm: Fix VPU HangingAdam Ford
The vpumix power domain has a reset assigned to it, however when used, it causes a system hang. Testing has shown that it does not appear to be needed anywhere. Fixes: d39d4bb15310 ("arm64: dts: imx8mm: add GPC node") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-11arm64: dts: imx8mm: Enable Hantro G1 and G2 video decodersAdam Ford
There are two decoders on the i.MX8M Mini controlled by the vpu-blk-ctrl. The G1 supports H264 and VP8 while the G2 support HEVC and VP9. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-11arm64: dts: imx8mm: Add the pcie supportRichard Zhu
Add the PCIe support on i.MX8MM platforms. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-11arm64: dts: imx8mm: Add the pcie phy supportRichard Zhu
Add the PCIe PHY support on iMX8MM platforms. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: imx8mm: don't assign PLL2 in SoC dtsiLucas Stach
The base i.MX8MM dtsi changes the audio PLL2 rate, which gets in the way if it should be used for anything else than audio. As this PLL doesn't seem to be used by any upstream supported board, just remove the rate configuration to allow boards to set it up as they wish. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-08arm64: dts: imx8m: remove unused "nvmem_macaddr_swap" property for FECJoakim Zhang
Remove unused "nvmem_macaddr_swap" property for FEC, there is no info in both dt-binding and driver, so it's safe to remove it. Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-06arm64: dts: imx8mm: Add CSI nodesAdam Ford
There is a csi bridge and csis interface that tie together to allow csi2 capture. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-11-23arm64: dts: imx8m: add cache infoPeng Fan
i.MX8M Family use A53 Cores and has 32KB ICache with 32KB DCache. - Icache is 2-way set associative - Dcache is 4-way set associative - L2cache is 16-way set associative - Line size are 64bytes Except i.MX8MQ has 1MB L2 Cache, others has 512KB L2 Cache. So add the cache info in device tree and let use could see that from /sys/devices/system/cpu/cpu[x]/cache/ Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05arm64: dts: imx8mm: add DISP blk-ctrlLucas Stach
Add the DT node for the DISP blk-ctrl. With this in place the display/mipi power domains are fully functional. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05arm64: dts: imx8mm: add VPU blk-ctrlLucas Stach
Add the DT node for the VPU blk-ctrl. With this in place the VPU power domains are fully functional. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05arm64: dts: imx8mm: Add GPU nodes for 2D and 3D coreFrieder Schrempf
According to the documents, the i.MX8M-Mini features a GC320 and a GCNanoUltra GPU core. Etnaviv detects them as: etnaviv-gpu 38000000.gpu: model: GC600, revision: 4653 etnaviv-gpu 38008000.gpu: model: GC520, revision: 5341 This seems to work fine more or less without any changes to the HWDB, which still might be needed in the future to correct some features, etc. [lst]: Added power domains and switched clock assignments to the new clock defines used for the composite clocks, instead of relying on the backwards compat defines. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05arm64: dts: imx8mm: put USB controllers into power-domainsLucas Stach
Now that we have support for the power domain controller on the i.MX8MM we can put the USB controllers in their respective power domains to allow them to power down the PHY when possible. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05arm64: dts: imx8mm: add GPC nodeLucas Stach
Add the DT node for the GPC, including all the PGC power domains, some of them are not fully functional yet, as they require interaction with the blk-ctrls to properly power up/down the peripherals. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-01Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC DT updates from Arnd Bergmann: "As usual, the bulk of work in the SoC tree goes into DT files, this time with a roughly even split between 32-bit and 64-bit SoCs rather than the usual mostly 64-bit changes. New SoCs: - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit platform based on the older SAMA5 series. - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing phone SoCs. - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas SoCs. New boards: - Marvell CN913x reference boards - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert and Fuji server boards. - Snapdragon 665 based Sony Xperia 10II - Snapdragon MSM8916 based Xiaomi Redmi 2 - Snapdragon MSM8226 based Samsung Galaxy S3 Neo - NXP i.MX based 32-bit boards: - DHCOM based PicoITX - DHSOM based DRC0ỉ - SolidRun SolidSense - SKOV i.MX6 boards. - NXP i.MX based 64-bit boards: - Nitrogen8 SoM and MNT Reform2 - LS1088A based Traverse Ten64 - i.MX8M based GW7902. - NVIDIA Jetson TX2 NX Developer Kit - 4KOpen STiH418-b2264 development board - ux500 based Samsung phones: Gavini, Codina and Kyle - TI AM335x based Sancloud BBE Lite - ixp4xx dts files to replace all old board files Other changes: - Treewide fixes for dtc warnings - Rockchips i/o domain support - TI OMAP/AM3 CPSW switch driver support - Improved device support for allwinner, aspeed, qualcomm, NXP, nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti, OMAP and actions" * tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits) arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings ARM: dts: rockchip: Add SFC to RV1108 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board dt-bindings: vendor-prefixes: add Traverse Technologies arm64: dts: add device tree for Traverse Ten64 (LS1088A) arm64: dts: ls1088a: add missing PMU node arm64: dts: ls1088a: add internal PCS for DPMAC1 node ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards dt-bindings: vendor-prefixes: Add an entry for SKOV A/S arm64: dts: imx8mq-reform2: add sound support arm64: dts: imx8m: drop interrupt-affinity for pmu arm64: dts: imx8qxp: update pmu compatible arm64: dts: imx8mm: update pmu compatible ...
2021-08-14arm64: dts: imx8m: drop interrupt-affinity for pmuPeng Fan
i.MX8M use PPI for pmu, interrupt-affinity is not needed. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mm: update pmu compatiblePeng Fan
i.MX8MM features four Cortex-A53 cores, update the compatible to use more accurate "arm,cortex-a53-pmu" Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8m: Replace deprecated fsl,usbphy DT props with physMarek Vasut
The fsl,usbphy DT property is deprecated, replace it with phys DT property and specify #phy-cells. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-28arm64: dts: imx8m: add "fsl,imx8mq-fec" compatible string for FECJoakim Zhang
Add "fsl,imx8mq-fec" compatible string for FEC to support new feature (IEEE 802.3az EEE standard). Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12arm64: dts: imx8mm: specify dma-rangesLucas Stach
DMA addressing capabilities on i.MX8MM are limited by the interconnect, same as on i.MX8MQ. Add dma-ranges to the the peripheral bus to let the kernel know about this. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-07 12:28:34 +0000