Age | Commit message (Collapse) | Author |
|
This reverts commit 095b96b2b8c6dcabf40bbfe4bb99a95fe55c7463.
Marek reported the similar change in imx8mp-dhcom-pdk3.dts
caused a regression:
"This patch breaks USB-C port on this board.
If I plug in USB-C storage device, it is not detected. If I revert this
patch, it is detected.
Please drop this patch for now."
Revert it here as well.
Fixes: 095b96b2b8c6 ("arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Describe the PTN5150 USB-C connector to improve the devicetree description
and fix the following dt-schema warning:
imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The following warning is shown when probing device:
pca953x 1-0020: supply vcc not found, using dummy regulator
Define a new fixed 3.3v regulator for carrier board peripherals,
enabled by mosfet switch Q2 after the SOM_3V3 supply rises (no software
control).
Add this new regulator as vcc supply to the PCA9534 to silence the warning.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
USB OTG is currently not working for new versions of the Variscite
Symphony EVK and imx8mn nano SOM (versions >= 1.4a).
The PTN5150 circuitry on newer versions of the Symphony EVK board has
a non-standard configuration in which the PTN5150 IRQ pin is left
unconnected, and the PTN5150 ID pin is connected to GPIO1_IO11. This
requires changes to the ptn5150 driver to support this new mode.
Variscite have indicated their intention to submit those changes
upstream.
In the meantime, import device tree changes from linux-5.15 branch of
varigit repos to at least make the USB OTG port operate correctly in
host mode.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The VAR SOM symphony carrier board can be used with SOMs which have a
soldered ethernet PHY onboard and with SOMs which don't have one.
For SOMs with an onboard PHY, the PHY on the cartrier board is not
used, and GPIO1_IO9 is used as a reset line to the onboard PHY.
For SOMs without an onboard PHY, the PHY on the carrier board is
used. For this configuration, pca9534 GPIO 5 (located on the carrier
board) is used as a reset line to the PHY, and GPIO1_IO9 is not
used.
GPIO1_IO9 is not connected to any user-accessible pins or functions,
and leaving it enabled in the mux pinctrl for both configurations is
safe.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
VAR-SOM-MX8MN
Add a basic DTS for Variscite Symphony evaluation kit with VAR-SOM-MX8MN
(i.MX 8M Nano) System on Module. This brings up the board with basic
functionalities although still few issues remain (e.g. I2C3 and USB OTG
port, although it might not be the problem of DTS).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|