summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
AgeCommit message (Collapse)Author
2023-12-16arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by defaultAlexander Stein
Even if the 'dsp' node is disabled the memory intended to be used by the DSP is reserved. This limits the memory range suitable for CMA allocation. Thus disable the dsp_reserved node. DSP users need to enable it in parallel to the 'dsp' node. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-16arm64: dts: imx8qxp-mek: Move port under USB connectorFabio Estevam
Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'. Do as requested to fix the following dt-schema warning: imx8qxp-mek.dtb: tcpc@50: connector:ports: 'port@0' is a required property from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# imx8qxp-mek.dtb: tcpc@50: connector: Unevaluated properties are not allowed ('ports' was unexpected) from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8qxp-mek: Fix gpio-sbu-mux compatibleFabio Estevam
Per gpio-sbu-mux.yaml, the compatible entry is incomplete. The imx8qxp-mek board uses a CBDTU02043, so complete the gpio-sbu-mux compatible accordingly. This fixes the following schema warning: imx8qxp-mek.dtb: gpio-sbu-mux: compatible:0: 'gpio-sbu-mux' is not one of ['onnn,fsusb43l10x', 'pericom,pi3usb102'] from schema $id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8qxp-mek: enable 8qxp lpuart2 and lpuart3Frank Li
Enable uart2 and uart3 for imx8qxp-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-06arm64: dts: freescale: imx8qxp-mek: enable cadence usb3Frank Li
Enable USB3 controller, phy and typec related nodes. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-14arm64: dts: imx8: align thermal node names with bindingsKrzysztof Kozlowski
Bindings expect thermal node names to end with '-thermal': imx8qxp-mek.dtb: thermal-zones: 'pmic-thermal0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31arm64: dts: freescale: Fix pca954x i2c-mux node namesGeert Uytterhoeven
"make dtbs_check": arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected) From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-18arm64: dts: freescale: imx8q: add imx vpu codec entriesMing Qian
Add the Video Processing Unit node for IMX8Q SoC. Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Shijie Qin <shijie.qin@nxp.com> Signed-off-by: Zhou Peng <eagle.zhou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-29arm64: dts: imx8: split adma ss into dma and audio ssDong Aisheng
amda ss is consisted of dma and audio ss in qxp which are also used in qm. Let's split them into two ss for better code reuse. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-29arm64: dts: imx8: switch to two cell scu clock bindingDong Aisheng
switch to two cell scu clock binding Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-13arm64: dts: imx8qxp-mek: Do not use underscore in node nameFabio Estevam
Underscores are not recommended to be used in node names, so change the pinctrl IO expander node name. This change also makes the pinctrl node names to follow the convention used by other pinctrl group names. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-04-29arm64: dts: imx8qxp-mek: Add PMIC thermal zone supportAnson Huang
i.MX8QXP MEK board has PMIC thermal sensor, add support for it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-04-29arm64: dts: imx8qxp-mek: Sort labels alphabeticallyAnson Huang
Sort the labels alphabetically for consistency. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-19arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHYFabio Estevam
There is only on Ethernet port and one Ethernet PHY on imx8qxp-mek. Remove the unexisting ethphy1 port. This fixes a run-time warning: mdio_bus 5b040000.ethernet-1: MDIO device at address 1 is missing. Fixes: fdea904e85e1 ("arm64: dts: imx: add imx8qxp mek support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28arm64: dts: imx8qxp: Move usdhc clocks assignment to board DTAnson Huang
usdhc's clock rate is different according to different devices connected, so clock rate assignment should be placed in board DT according to different devices connected on each usdhc port. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25arm64: dts: imx8qxp-mek: Enable scu keyAnson Huang
Enable scu key for i.MX8QXP MEK board. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19arm64: dts: imx8qxp: Add DSP DT nodeDaniel Baluta
This includes DSP reserved memory, ADMA DSP device and DSP MU communication channels description. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22arm64: dts: imx8qxp-mek: Add i2c1 with pca9646Leonard Crestez
Add an initial description of the i2c1 bus with a pca9646 i2c switch and various gpio expanders and sensors behind that. Only add the sensors which already have upstream drivers. According to the datasheet the pca9646 is software compatible with pca9546 so no driver changes should be required. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-15arm64: dts: imx: add imx8qxp mek supportAisheng Dong
i.MX 8QuadXPlus is a quad (4x) Cortex-A35 proccessor with powerful graphic and multimedia features. This patch adds imx8qxp mek board support. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-03 06:37:54 +0000