summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
AgeCommit message (Collapse)Author
2023-07-27arm64: dts: qcom: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio ↵Alexander Stein
properties Use id-gpios and vbus-gpios instead. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Link: https://lore.kernel.org/r/20230724103914.1779027-7-alexander.stein@ew.tq-group.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-04-07arm64: dts: qcom: msm8998: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-3-krzysztof.kozlowski@linaro.org
2023-04-04arm64: dts: qcom: msm8998-yoshino: Use actual pin names for pin nodesKonrad Dybcio
With the gpio-line-names in place coming from SONY themselves, we can now make the pin nodes and their labels to more closely resemble the actual thing. 4k has been renamed to four_k due to dtc limitations. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230314-topic-yoshino_gpio-v2-2-4cb80e187e38@linaro.org
2023-04-04arm64: dts: qcom: msm8998-yoshino: Use SONY GPIO namesKonrad Dybcio
Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the Yoshino devices DTs to better document the hardware. Lilac and Poplar have identical pin assignments. Diff between these two and maple: TLMM: - "NC", + "TS_VDDIO_EN", PMI8998: - "NC" + "USB_SWITCH_SEL" - "NC" + "4K_DISP_DCDC_EN" PM8005: - "NC" + "EAR_EN" Which is probably due to Maple being designed and released quite a bit earlier than the other two and it having a super high tech true-4K display. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230314-topic-yoshino_gpio-v2-1-4cb80e187e38@linaro.org
2023-03-15arm64: dts: qcom: msm8998-sony-xperia: correct GPIO keys wakeupKrzysztof Kozlowski
gpio-keys,wakeup is a deprecated property: msm8998-sony-xperia-yoshino-lilac.dtb: gpio-keys: button-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304123358.34274-3-krzysztof.kozlowski@linaro.org
2022-12-28arm64: dts: qcom: Re-enable resin on MSM8998 and SDM845 boardsDzmitry Sankouski
resin node declaration was moved to pm8998.dtsi file (in disabled state). MSM8998 and SDM845 boards defining resin node did not previously have status="okay" and ended up disabled. Re-enable it by using resin node link from pm8998.dtsi with status="okay". Fixes: f86ae6f23a9e ("arm64: dts: qcom: sagit: add initial device tree for sagit") Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reported-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/linux-arm-msm/20221222115922.jlachctn4lxopp7a@SoMainline.org/ Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228115243.201038-1-dsankouski@gmail.com
2022-12-27arm64: dts: qcom: Use plural _gpios node label for PMIC gpiosMarijn Suijten
The gpio node in PMIC dts'es define access to multiple GPIOs. Most Qcom PMICs were already using the plural _gpios label to point to this node, but a few PMICs were left behind including the recently-pulled pm(i)8950. Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005, pm(i)8950, and pm(i)8998. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209220450.1793421-1-marijn.suijten@somainline.org
2022-10-17arm64: dts: qcom: msm8998: align TLMM pin configuration with DT schemaKrzysztof Kozlowski
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221013210612.95994-3-krzysztof.kozlowski@linaro.org
2022-10-17arm64: dts: qcom: msm8998-yoshino: Fix up SMD regulators formattingKonrad Dybcio
Add a new line between each subnode and make the { } consistent. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921004741.152765-1-konrad.dybcio@somainline.org
2022-10-17arm64: dts: qcom: align RPM regulators node name with bindingsKrzysztof Kozlowski
Node names should be generic and new DT schema expects RPM regulators node to be just "regulators". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220926092104.111449-3-krzysztof.kozlowski@linaro.org
2022-07-02arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor supportMarkuss Broks
This patch adds device tree support for the VL53L0X ToF sensor found on all Yoshino devices. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220523175344.5845-6-markuss.broks@gmail.com
2022-07-02arm64: dts: qcom: align gpio-key node names with dtschemaKrzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220616005333.18491-21-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: align PMIC GPIO pin configuration with DT schemaKrzysztof Kozlowski
DT schema expects PMIC GPIO pin configuration nodes to be named with '-state' suffix. Optional children should be either 'pinconf' or followed with '-pins' suffix. This fixes dtbs_check warnings like: sdm845-xiaomi-beryllium.dtb: gpios@c000: 'vol-up-active' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-6-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: msm8998*: Clean up #includesKonrad Dybcio
Sort the includes and remove unused ones. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-12-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998*: Keep MMCC & MMSS_SMMU enabled by defaultKonrad Dybcio
MMCC is a component of the SoC that should always be configured. It was kept off due to misconfiguration on clamshell machines. Keep it disabled on these ones and enable it by default on all the others. Exactly the same story applies to MMSS_SMMU, which directly depends on MMCC. Do note, that if a platform doesn't use neither EFIFB (only applies to WoA devices in this case) or simplefb (applies to precisely 2 msm8998 devices as of this commit), this will not cause any harm. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-10-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998-yoshino/oneplus: Use pm8005_regulators labelKonrad Dybcio
Now that a label is added, use it! Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-7-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998-yoshino: Remove simple-bus compatible from clocks{}Konrad Dybcio
It's not necessary and the SoC clocks{} node doesn't use it either. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-6-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998-yoshino: Add USB extconKonrad Dybcio
While not strictly necessary, at least on maple, configure the USB extcon, which requires two pins on Yoshino. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-5-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998*: Fix TLMM and pin nodesKonrad Dybcio
Remove the unnecessary level of indentation, commonize SDC2 pins and notice that SDCC2_CD_ON and _OFF is identical, deduplicate it! Also, remove some unnecessary overrides and use decimal values in #-cells Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-1-konrad.dybcio@somainline.org
2021-11-30arm64: dts: qcom: Drop input-name propertyDang Huynh
This property doesn't seem to exist in the documentation nor in source code, but for some reason it is defined in a bunch of device trees. Signed-off-by: Dang Huynh <danct12@riseup.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211123162436.1507341-1-danct12@riseup.net
2021-09-24arm64: dts: qcom: msm8998-xperia: Add audio clock and its pinAngeloGioacchino Del Regno
All smartphones of this platform are equipped with a WCD9335 audio codec, getting its MCLK from PM8998 gpio13: add this clock to DT. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909123733.367248-7-angelogioacchino.delregno@somainline.org
2021-09-24arm64: dts: qcom: msm8998-xperia: Add camera regulatorsAngeloGioacchino Del Regno
All of the machines of the Sony Yoshino platform are equipped with two cameras, sharing the same regulators configuration. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909123733.367248-6-angelogioacchino.delregno@somainline.org
2021-09-24arm64: dts: qcom: msm8998-xperia: Configure display boost regulatorsAngeloGioacchino Del Regno
Add configuration for the LAB and IBB regulators (in boost mode): this platform has smartphones with three different display sizes, hence different displays requiring different voltage. The common configuration parameters have been put in the common device-tree, while specific voltage specs and soft-start-us are variant specific, so they have been put into the machine specific dts file. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909123733.367248-5-angelogioacchino.delregno@somainline.org
2021-09-24arm64: dts: qcom: msm8998-xperia: Add support for gpio vibratorAngeloGioacchino Del Regno
All smartphones in the Sony Yoshino platforms have got a simple vibrator hooked to a GPIO: add support for that and add its own pin configuration. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909123733.367248-4-angelogioacchino.delregno@somainline.org
2021-09-24arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 BluetoothAngeloGioacchino Del Regno
This platform uses the WCN3990 Bluetooth chip, reachable on UART-3. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909123733.367248-3-angelogioacchino.delregno@somainline.org
2021-09-24arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen supportAngeloGioacchino Del Regno
All of the devices in the Sony Yoshino platform are using a Synaptics RMI4-compatible touch IC with identical pins and supplies: enable the I2C-5 bus and add the rmi4-i2c node along with the required pin configurations. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909123733.367248-2-angelogioacchino.delregno@somainline.org
2021-09-24arm64: dts: qcom: msm8998: Introduce support for Sony Yoshino platformAngeloGioacchino Del Regno
This commit introduces support for the Sony Yoshino platform, using the MSM8998 SoC, including: - Sony Xperia XZ1 (codename Poplar), - Sony Xperia XZ1 Compact (codename Lilac), - Sony Xperia XZ Premium (codename Maple). All of the three aforementioned smartphones are sharing a 99% equal board configuration, with very small differences between each other, which is the reason for the introduction of a common msm8998-sony-xperia-yoshino DT. This base configuration includes regulators and project-wide pin configurations and it's made to boot to a serial console. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909123733.367248-1-angelogioacchino.delregno@somainline.org
generated by cgit (git 2.34.1) at 2024-06-07 07:38:27 +0000