summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/pms405.dtsi
AgeCommit message (Collapse)Author
2022-06-28arm64: dts: qcom: correct interrupt controller on PM8916 and PMS405Krzysztof Kozlowski
The PM8916 and PMS405 PMIC GPIOs are interrupt controllers, as described in the bindings and used by the driver. Drop the interrupts (apparently copied from downstream tree), just like in commit 61d2ca503d0b ("arm64: dts: qcom: fix pm8150 gpio interrupts"): qcs404-evb-4000.dtb: gpio@c000: 'interrupts' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+' qcs404-evb-4000.dtb: gpio@c000: 'interrupt-controller' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220508135932.132378-4-krzysztof.kozlowski@linaro.org
2022-06-28arm64: dts: qcom: add missing gpio-ranges in PMIC GPIOsKrzysztof Kozlowski
The new Qualcomm PMIC GPIO bindings require gpio-ranges property: sm8250-sony-xperia-edo-pdx203.dtb: gpio@c000: 'gpio-ranges' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220508135932.132378-3-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: add fallback compatible to PMIC GPIOsKrzysztof Kozlowski
The bindings require all PMIC GPIO nodes to have two compatibles - specific followed by SPMI or SSBI fallback. Add the fallback to fix warnings like: msm8916-samsung-serranove.dtb: gpios@c000: compatible: ['qcom,pm8916-gpio'] is too short Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-7-krzysztof.kozlowski@linaro.org
2022-01-31arm64: dts: qcom: pms405: assign device specific compatibleDavid Heidelberg
Follow common pattern for this device, first specific and then generic compatible. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211227215238.113956-1-david@ixit.cz
2021-01-22arm64: dts: qcom: Add missing "-thermal" suffix for thermal zonesManivannan Sadhasivam
The thermal devicetree binding requires the "-thermal" suffix for all thermal zones. Hence, add the missing suffix for PMIC based thermal zones. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118051005.55958-8-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: pms405: remove reduandant propertiesVinod Koul
pms405@1 nodes specified unnecessary #address-cells/#size-cells but the subnodes dont have "ranges" or "reg" so remove it arch/arm64/boot/dts/qcom/pms405.dtsi:141.21-150.4: Warning (avoid_unnecessary_addr_size): /soc@0/spmi@200f000/pms405@1: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: pms405: add unit name adc nodesVinod Koul
The adc nodes have reg property but were missing the unit name, so add that to fix these warnings: arch/arm64/boot/dts/qcom/pms405.dtsi:91.12-94.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/ref_gnd: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:96.14-99.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vref_1p25: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:101.19-104.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vph_pwr: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:106.13-109.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/die_temp: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:111.27-116.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor1: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:118.27-123.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor3: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:125.22-130.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/xo_temp: node has a reg or ranges property, but no unit name Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-29arm64: dts: qcom: pms405: Rename adc outputs as per schematicsAmit Kucheria
The adc outputs shouldn't contain information about their configuration e.g. 100K pull-up, but just reflect the name of the signal in the schematics. Making them labels also allows us to overwrite their configuration in board-specific DTs. Sort them by order as used in adc5_chans_rev2, while we're at it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-05-29arm64: dts: qcom: pms405: calibrate the VADC correctlyAmit Kucheria
Set the qcom,ratiometric property to make the VADC use the VDD reference (1.875V) and GND for channel calibration of the temperature channels instead of 1.25V. Allow a 200us delay between the AMUX configuration and ADC starting conversion using qcom,hw-settle-time as described in documentation. Fixes: 041b9a7b9fdb ("arm64: dts: pms405: Export PMIC temperature to thermal framework") Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-03-27arm64: dts: qcom: pms405: add spmi regulatorsJorge Ramirez-Ortiz
The PMS405 sports 5 SMPS and 13 LDO regulators, add the regulators to pms405 DTS. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> [bjorn: updated label] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-14arm64: dts: pms405: Export PMIC temperature to thermal frameworkAmit Kucheria
The PMS405 PMIC has an ADC that exposes the on-die temperature that we wire up to spmi-temp-alarm thermal driver. This allows the PMIC temperature to be exposed to Linux through the thermal framework. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-18arm64: dts: qcom: pms405: Add pon and pwrkey nodesVinod Koul
PMS405 also features PON block, so add PON and PWRKEY nodes Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-18arm64: dts: qcom: pms405: add gpiosVinod Koul
Add the GPIOs present on PMS405 chip. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-18arm64: dts: qcom: pms405: add rtc nodeVinod Koul
RTC is found on PMIC PMS405 and is same as other PMIC used, so add the rtc node with compatible as qcom,pm8941-rtc Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-18arm64: dts: qcom: pms405: add spmi nodeVinod Koul
Add the pms405 DT file with spmi node. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
generated by cgit (git 2.34.1) at 2025-04-15 14:59:00 +0000