| Age | Commit message (Collapse) | Author |
|---|
|
Cheza's SPI flash hookups (qspi) are exactly the same as trogdor's.
Apply the same solution that's described in the patch ("arm64: dts:
qcom: sc7180: Fix trogdor qspi pin config")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323102605.14.I82951106ab8170f973a4c1c7d9b034655bbe2f60@changeid
|
|
As talked about in the patch ("dt-bindings: pinctrl: qcom: tlmm should
use output-disable, not input-enable"), using "input-enable" in
pinctrl states for Qualcomm TLMM pinctrl devices was either
superfluous or there to disable a pin's output.
Looking at cheza
* ec_ap_int_l, h1_ap_int_odl: Superfluous. The pins will be configured
as inputs automatically by the Linux GPIO subsystem (presumably the
reference for other OSes using these device trees).
* bios_flash_wp_l: Superfluous. This pin is exposed to userspace
through the kernel's GPIO API and will be configured automatically.
That means that in none of the cases for cheza did we need to change
"input-enable" to "output-disable" and we can just remove these
superfluous properties.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323102605.11.Ia439c29517b1c0625325a54387b047f099d16425@changeid
|
|
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sdm845-cheza-r2.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-1-krzysztof.kozlowski@linaro.org
|
|
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-6-krzysztof.kozlowski@linaro.org
|
|
Node names should be generic (as Devicetree spec mandates), so use
"bluetooth" for BT node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-1-krzysztof.kozlowski@linaro.org
|
|
Depending on the platform, either the modem or the AP must load GSI
firmware for IPA before it can be used. To date, this has been
indicated by the presence or absence of a "modem-init" property.
That mechanism has been deprecated. Instead, we indicate how GSI
firmware should be loaded by the value of the "qcom,gsi-loader"
property.
Update all arm64 platforms that use IPA to use the "qcom,gsi-loader"
property to specify how the GSI firmware is loaded.
Update the affected nodes so the status property is last.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Moved sc7280 change herobrine-lte-sku]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221231002716.2367375-3-elder@linaro.org
|
|
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222151319.122398-3-krzysztof.kozlowski@linaro.org
|
|
The gpio node in PMIC dts'es define access to multiple GPIOs. Most Qcom
PMICs were already using the plural _gpios label to point to this node,
but a few PMICs were left behind including the recently-pulled
pm(i)8950.
Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005,
pm(i)8950, and pm(i)8998.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209220450.1793421-1-marijn.suijten@somainline.org
|
|
Some devices have been using hsuart0 as an alias for the bluetooth UART,
rename this to serial1
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016172944.1892206-4-kc@postmarketos.org
|
|
The 4-pin configuration for UART6 is used for all or almost all SDM845
devices with built in Bluetooth. Move the pinmux configuration to
sdm845.dtsi in preparation to be removed from individual devices in
future patches.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016172944.1892206-2-kc@postmarketos.org
|
|
Add missing space or remove redundant one before opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919163333.129989-1-krzysztof.kozlowski@linaro.org
|
|
There is no "bias-no-pull" property. Assume intentions were disabling
bias.
Fixes: 79e7739f7b87 ("arm64: dts: qcom: sdm845-cheza: add initial cheza dt")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-3-krzysztof.kozlowski@linaro.org
|
|
Switch from the flat PC idle states of sdm845 to OSI hierarchical idle
states. The exceptions are the cheza plaftorms, which need to remain with
PC idle states. So in order allow all the other platforms to switch,
while cheza platforms to remain the same, replace the PC idle states with
the OSI ones in the main SDM845 dtsi, and then override the inherited OSI
states with PC ones, delete inherited psci cpus nodes, domain idle states
and power domain properties.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220630101403.1888541-1-abel.vesa@linaro.org
|
|
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-21-krzysztof.kozlowski@linaro.org
|
|
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526204248.832139-1-krzysztof.kozlowski@linaro.org
|
|
dtschema expects PWM node name to be a generic "pwm". This also matches
Devicetree specification requirements about generic node names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220214081916.162014-4-krzysztof.kozlowski@canonical.com
|
|
Almost any board that boots and has a way to interact with it
(say for the rare cases of just-pstore or let's-rely-on-bootloader-setup)
needs to set some GPIOs, so it makes no sense to include gpio.h separately
each time. Hence move it to SoC DTSI.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211002001358.45920-6-konrad.dybcio@somainline.org
|
|
DPU/MDSS is borderline useless without MDP, so disabling
both of them makes little sense. With this change, enabling
mdss will be enough.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211002001358.45920-4-konrad.dybcio@somainline.org
|
|
Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.
Re-enable these remote processors on boards that didn't previously explicitly
disable them.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
[bjorn: Added missing changes to db845c and lenovo-yoga-c630 to the patch]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211002001358.45920-3-konrad.dybcio@somainline.org
|
|
This compatible string isn't present upstream. Let's drop the node as it
isn't used.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210601185959.3101132-2-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The SMMU that sits in front of the QUP needs to be programmed properly
so that the i2c geni driver can allocate DMA descriptors. Failure to do
this leads to faults when using devices such as an i2c touchscreen where
the transaction is larger than 32 bytes and we use a DMA buffer.
arm-smmu 15000000.iommu: Unexpected global fault, this could be serious
arm-smmu 15000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000002, GFSYNR1 0x000006c0, GFSYNR2 0x00000000
Add the right SID and mask so this works.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[bjorn: Define for second QUP as well, be more specific in sdm845.dtsi]
Link: https://lore.kernel.org/r/20201122034149.626045-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Set the qcom,adreno-smmu compatible string for the GPU SMMU to enable
split pagetables and per-instance pagetables for drm/msm.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201109184728.2463097-5-jcrouse@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Having a non-MSA (Modem Self-Authentication) SID bypassed breaks modem
sandboxing i.e if a transaction were to originate from it, the hardware
memory protections units (XPUs) would fail to flag them (any transaction
originating from modem are historically termed as an MSA transaction).
Drop the unused non-MSA modem SID on SC7180 SoCs and cheza so that SMMU
continues to block them.
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Fixes: bec71ba243e95 ("arm64: dts: qcom: sc7180: Update Q6V5 MSS node")
Fixes: 68aee4af5f620 ("arm64: dts: qcom: sdm845-cheza: Add iommus property")
Cc: stable@vger.kernel.org
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200630081938.8131-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"A big part of this is a change in how devices get connected to IOMMUs
in the core code. It contains the change from the old add_device() /
remove_device() to the new probe_device() / release_device()
call-backs.
As a result functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group allocation
for each device. The reason for this change was to get more robust
allocation of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into the IOMMU
tree, but there are no known bugs left. The last fix is applied on-top
of the merge commit for the topic branches.
Other than that change, we have:
- Removal of the driver private domain handling in the Intel VT-d
driver. This was fragile code and I am glad it is gone now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the Intel VT-d
driver
- Replacement of the Intel SVM interfaces to the common IOMMU SVA
API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that it can be
claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of IOMMU
core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
* tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits)
iommu: Check for deferred attach in iommu_group_do_dma_attach()
iommu/amd: Remove redundant devid checks
iommu/amd: Store dev_data as device iommu private data
iommu/amd: Merge private header files
iommu/amd: Remove PD_DMA_OPS_MASK
iommu/amd: Consolidate domain allocation/freeing
iommu/amd: Free page-table in protection_domain_free()
iommu/amd: Allocate page-table in protection_domain_init()
iommu/amd: Let free_pagetable() not rely on domain->pt_root
iommu/amd: Unexport get_dev_data()
iommu/vt-d: Fix compile warning
iommu/vt-d: Remove real DMA lookup in find_domain
iommu/vt-d: Allocate domain info for real DMA sub-devices
iommu/vt-d: Only clear real DMA device's context entries
iommu: Remove iommu_sva_ops::mm_exit()
uacce: Remove mm_exit() op
iommu/sun50i: Constify sun50i_iommu_ops
iommu/hyper-v: Constify hyperv_ir_domain_ops
iommu/vt-d: Use pci_ats_supported()
iommu/arm-smmu-v3: Use pci_ats_supported()
...
|
|
We don't have the HPD line hooked up to the bridge chip. Add it as
suggested in the patch ("dt-bindings: drm/bridge: ti-sn65dsi86:
Document no-hpd").
NOTE: this patch isn't expected to have any effect but just keeps us
cleaner for the future. Currently the driver in Linux just assumes
that nobody has HPD hooked up. This change allows us to later
implement HPD support in the driver without messing up sdm845-cheza.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200507143354.v5.6.I89df9b6094549b8149aa8b8347f7401c678055b0@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add iommus property to remoteproc modem node.
Following SMMU global faults are seen without it.
arm-smmu 15000000.iommu: Unexpected global fault, this could be serious
arm-smmu 15000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000,
GFSYNR1 0x00000781, GFSYNR2 0x00000000
arm-smmu 15000000.iommu: Unexpected global fault, this could be serious
arm-smmu 15000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000,
GFSYNR1 0x00000461, GFSYNR2 0x00000000
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/38c607841e81664a2db69a27260cd7dfbd653458.1587407458.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add IPA-related nodes and definitions to "sdm845.dtsi".
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200313115237.10491-2-elder@linaro.org
[bjorn: Moved modem-init to cheza.dtsi]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Cheza boards require this node to probe, so add it.
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Link: https://lore.kernel.org/r/20200108032623.113921-1-acourbot@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
We don't use the power key from the PMIC on Cheza. Disable this node so
that we don't probe the driver for this device.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200121171806.9933-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
We want to specify per-device firmware-name, so move the zap node into
the .dts file for individual boards/devices. This lets us get rid of
the /delete-node/ for cheza, which does not use zap.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200112195405.1132288-5-robdclark@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add the cr50 device to the spi controller it is attached to. This
enables /dev/tpm0 and some login things on Cheza.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191216234204.190769-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This is unused on cheza. Delete the node to get ride of the reserved-
memory section, and to avoid the driver from attempting to load a zap
shader that doesn't exist every time it powers up the GPU.
This also avoids a massive amount of dmesg spam about missing zap fw:
msm ae00000.mdss: [drm:adreno_request_fw] *ERROR* failed to load
qcom/a630_zap.mdt: -2
adreno 5000000.gpu: [drm:adreno_zap_shader_load] *ERROR* Unable to
load a630_zap.mdt
Signed-off-by: Rob Clark <robdclark@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: 3fdeaee951aa ("arm64: dts: sdm845: Add zap shader region for GPU")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <agross@kernel.org>
|
|
We use a pinctrl "workaround" to toggle the UFS reset line. Now that UFS
controller can issue the reset, just specify the line as a GPIO and let
it be reset that way.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Unit address is supposed to be a number, using a macro with hex value is
not recommended, so add the value in unit name.
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:966.16-969.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4d: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:971.16-974.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4e: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:976.16-979.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4f: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:981.16-984.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x50: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:986.16-989.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x51: unit name should not have leading "0x"
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This is essentialy a squash of a bunch of history of cheza dt updates
from chromium kernel, some of which were themselves squashes of history
from older chromium kernels.
I don't claim any credit other than wanting to more easily boot upstream
kernel on cheza to have an easier way to test upstream driver work ;-)
I've added below in Cc tags all the original actual authors (apologies
if I missed any).
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <agross@kernel.org>
|
