summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
AgeCommit message (Collapse)Author
2022-10-17arm64: dts: qcom: split beryllium dts into common dtsi and tianma dtsJoel Selvaraj
There are two panel variants of Xiaomi Poco F1. Tianma and EBBG panel. The previous beryllium dts supported the Tianma variant. In order to add support for EBBG variant, the common nodes from beryllium dts are moved to a new common dtsi and to make the variants distinguishable, sdm845-xiaomi-beryllium.dts is now named as sdm845-xiaomi-beryllium-tianma.dts. The model property is updated to distinguish between the variants. The compatibility property is moved to the tianma variant, but it is not updated to avoid any further conflict with other projects/users that might depend on it. Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220909035447.36674-2-joelselvaraj.oss@gmail.com
2022-10-17arm64: dts: qcom: sdm845: align dai node names with dtschemaKrzysztof Kozlowski
DT schema expects DAI node names to be "dai": qcom/sdm845-xiaomi-beryllium.dtb: dais: 'qi2s@22' does not match any of the regexes: '^dai@[0-9]+$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220910091428.50418-6-krzysztof.kozlowski@linaro.org
2022-08-29arm64: dts: qcom: use GPIO flags for tlmmKrzysztof Kozlowski
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs. Include gpio.h header if this is first usage of that flag. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220802153947.44457-4-krzysztof.kozlowski@linaro.org
2022-07-02arm64: dts: qcom: sdm845*: replace i2s reg with constantLuca Weiss
Make it easier to understand what the reg in those nodes is by using the constants provided by qcom,q6dsp-lpass-ports.h. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220603094710.64591-1-luca.weiss@fairphone.com
2022-07-02arm64: dts: qcom: align gpio-key node names with dtschemaKrzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220616005333.18491-21-krzysztof.kozlowski@linaro.org
2022-07-02arm64: dts: qcom: adjust whitespace around '='Krzysztof Kozlowski
Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220526204248.832139-1-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: align PMIC GPIO pin configuration with DT schemaKrzysztof Kozlowski
DT schema expects PMIC GPIO pin configuration nodes to be named with '-state' suffix. Optional children should be either 'pinconf' or followed with '-pins' suffix. This fixes dtbs_check warnings like: sdm845-xiaomi-beryllium.dtb: gpios@c000: 'vol-up-active' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-6-krzysztof.kozlowski@linaro.org
2022-04-19arm64: dts: qcom: sdm845-xiaomi-beryllium: enable qcom wled backlight and ↵Joel Selvaraj
link to panel Xiaomi Poco F1 uses the QCOM WLED driver for backlight control. Enable and link it to the panel to use it. Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/BY5PR02MB70092607CD7CDD8CF8BCD464D9E09@BY5PR02MB7009.namprd02.prod.outlook.com
2022-04-19arm64: dts: qcom: sdm845-xiaomi-beryllium: enable second wifi channelJoel Selvaraj
Like the c630, the Poco F1 is also capable of using both antenna channels for 2.4 and 5ghz wifi, however unlike the c630 only the first channel is used for bluetooth. Similar to Oneplus 6. Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/BY5PR02MB7009E2566F9000F338432761D91F9@BY5PR02MB7009.namprd02.prod.outlook.com
2022-04-19arm64: dts: qcom: sdm845-xiaomi-beryllium: fix typo in panel's vddio-supply ↵Joel Selvaraj
property vddio is misspelled with a "0" instead of "o". Fix it. Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/BY5PR02MB7009901651E6A8D5ACB0425ED91F9@BY5PR02MB7009.namprd02.prod.outlook.com
2022-04-19arm64: dts: qcom: sdm845-xiaomi-beryllium: enable qcom ipa driverJoel Selvaraj
Enable Qualcomm IP Accelerator (IPA) driver for mobile data functionality which works by using ModemManager. Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/BY5PR02MB7009405D7C06C0B480974063D91F9@BY5PR02MB7009.namprd02.prod.outlook.com
2022-04-19arm64: dts: qcom: sdm845-xiaomi-beryllium: change firmware path and use mbn ↵Joel Selvaraj
format The "qcom/sdm845/" path conflicts with db845c's firmware that are present in the linux-firmware package. Xiaomi uses their own signed firmware for Poco F1 and can't use the db845c's firmware. So let's use "qcom/sdm845/beryllium/" to distinguish Poco F1's firmware files. For easier handling and packaging, the mdt+bXX files are squashed using Bjorn Andersson's pil-squasher tool from this link: https://github.com/andersson/pil-squasher Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/BY5PR02MB700966DEE6F6044EBEB5B892D91F9@BY5PR02MB7009.namprd02.prod.outlook.com
2021-11-17arm64: dts: qcom: sdm845-xiaomi-beryllium: set venus firmware pathKate Doeen
Enable loading the Qualcomm Venus video accelerator firmware on Xiaomi Pocophone F1. Signed-off-by: Kate Doeen <jld3103yt@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211028102016.106063-1-jld3103yt@gmail.com
2021-10-23arm64: dts: qcom: sdm845: Move gpio.h inclusion to SoC DTSIKonrad Dybcio
Almost any board that boots and has a way to interact with it (say for the rare cases of just-pstore or let's-rely-on-bootloader-setup) needs to set some GPIOs, so it makes no sense to include gpio.h separately each time. Hence move it to SoC DTSI. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-6-konrad.dybcio@somainline.org
2021-10-23arm64: dts: qcom: sdm845: Add size/address-cells to dsi[01]Konrad Dybcio
Add the aforementioned properties in the SoC DTSI so that everybody doesn't have to copy that into their device DTs, effectively reducing code duplication. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-5-konrad.dybcio@somainline.org
2021-10-23arm64: dts: qcom: sdm845: Don't disable MDP explicitlyKonrad Dybcio
DPU/MDSS is borderline useless without MDP, so disabling both of them makes little sense. With this change, enabling mdss will be enough. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-4-konrad.dybcio@somainline.org
2021-10-23arm64: dts: qcom: sdm845: Disable Adreno, modem and Venus by defaultKonrad Dybcio
Components that rely on proprietary (not to mention signed!) firmware should not be enabled by default, as lack of the aforementioned firmware could cause various issues, from random errors to straight-up failing to boot. Re-enable these remote processors on boards that didn't previously explicitly disable them. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-By: Steev Klimaszewski <steev@kali.org> [bjorn: Added missing changes to db845c and lenovo-yoga-c630 to the patch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-3-konrad.dybcio@somainline.org
2021-10-16arm64: dts: qcom: add 'chassis-type' propertyArnaud Ferraris
A new 'chassis-type' root node property has recently been approved for the device-tree specification, in order to provide a simple way for userspace to detect the device form factor and adjust their behavior accordingly. This patch fills in this property for end-user devices (such as laptops, smartphones and tablets) based on Qualcomm ARM64 processors. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> # msm8916 Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211016102025.23346-4-arnaud.ferraris@collabora.com
2021-05-25arm64: dts: qcom: sdm845-xiaomi-beryllium: Add audio supportJoel Selvaraj
This patch adds audio support for Xiaomi Poco F1 phone. Phone's primary Mic and 3.5mm Headphone jack are handled through the SDM845 sound card and WCD9340 codec. Tested-by: Amit Pundir <amit.pundir@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Link: https://lore.kernel.org/r/BN6PR2001MB17966ED1D787FA3F4B90A1A7D95B9@BN6PR2001MB1796.namprd20.prod.outlook.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-05arm64: dts: qcom: sdm845-xiaomi-beryllium: Add DSI and panel bitsSumit Semwal
Enabling the Display panel for beryllium requires DSI labibb regulators and panel dts nodes to be added. It is also required to keep some of the regulators as always-on. Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210404194437.537011-1-amit.pundir@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12arm64: dts: qcom: Add support for Xiaomi Poco F1 (Beryllium)Amit Pundir
Add initial dts support for Xiaomi Poco F1 (Beryllium). This initial support is based on upstream Dragonboard 845c (sdm845) device. With this dts, Beryllium boots AOSP up to ADB shell over USB-C. Supported functionality includes UFS, USB-C (peripheral), microSD card and Vol+/Vol-/power keys. Bluetooth should work too but couldn't be verified from adb command line, it is verified when enabled from UI with few WIP display patches. Just like initial db845c support, initializing the SMMU is clearing the mapping used for the splash screen framebuffer, which causes the device to hang during boot and recovery needs a hard power reset. This can be worked around using: fastboot oem select-display-panel none To switch ON the display back run: fastboot oem select-display-panel But this only works on Beryllium devices running bootloader version BOOT.XF.2.0-00369-SDM845LZB-1 that shipped with Android-9 based release. Newer bootloader version do not support switching OFF the display panel at all. Reviewed-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Link: https://lore.kernel.org/r/1599840940-18144-1-git-send-email-amit.pundir@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit (git 2.34.1) at 2024-06-13 00:07:20 +0000