| Age | Commit message (Collapse) | Author |
|---|
|
According to schematics the L9B regulator supplies VCCQ (already in DTS)
and the UFS controller pads (VDD_PX10, missing vdd-hba). Add the
missing supply for full hardware description, even though it should not
have functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230906104744.163479-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-1-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-10-krzysztof.kozlowski@linaro.org
|
|
Depending on the platform, either the modem or the AP must load GSI
firmware for IPA before it can be used. To date, this has been
indicated by the presence or absence of a "modem-init" property.
That mechanism has been deprecated. Instead, we indicate how GSI
firmware should be loaded by the value of the "qcom,gsi-loader"
property.
Update all arm64 platforms that use IPA to use the "qcom,gsi-loader"
property to specify how the GSI firmware is loaded.
Update the affected nodes so the status property is last.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Moved sc7280 change herobrine-lte-sku]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221231002716.2367375-3-elder@linaro.org
|
|
Disable PON/RESIN keys by default and keep the RESIN keycode set-per-board, as
these settings are not common between devices (one cannot even assume all
devices have buttons nowadays..).
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-7-konrad.dybcio@somainline.org
|
|
Almost any board that boots and has a way to interact with it
(say for the rare cases of just-pstore or let's-rely-on-bootloader-setup)
needs to set some GPIOs, so it makes no sense to include gpio.h separately
each time. Hence move it to SoC DTSI.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-1-konrad.dybcio@somainline.org
|
|
The following properties are not supported and causing dtbs_check
warnings.
- vdda-phy-max-microamp
- vdda-pll-max-microamp
- vddp-ref-clk-max-microamp
- vddp-ref-clk-always-on
Drop them from QMP PHY nodes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
|
|
The RTC on the pmk8350 is not useful on all boards. Some boards may
not provide backup power to the PMIC but might have another RTC on the
board that does have backup power. In this case it's better to not use
the RTC on the PMIC.
At the moment, the only boards that includes this PMIC are sc7280-idp
and sc7280-idp2. On sc7280-idp I'm not aware of any other RTCs, but
sc7280-idp2 has a Chrome OS EC on it and this is intended to provide
the RTC for the AP.
Let's do what we normally do for hardware that's not used by all
boards and set it to a default status of "disabled" and then enable it
on the boards that need it.
NOTE: for sc7280-idp it's _possible_ we might also want to add
`allow-set-time;`. That could be the subject of a future patch if it
is indeed true.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Satya Priya <skakit@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[bjorn: Enable the RTC on the MTP as well]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929153553.1.Ib44c2ac967833d7a3f51452d44d15b7b8d23c1f0@changeid
|
|
In order to conform with downstream and upstream for previous generations
of this hardware, rename dt-node 'qupv3_id_1' to 'qupv3_id_0'.
Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/20210803125756.93824-1-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enable IPA for the SM8350 MTP.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210413170553.1778792-3-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
SM8350-MTP features PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
PMR735B. PMICs Add the dtsi for these PMICs to MTP.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312052737.3558801-9-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This enabled the four remoteprocs found in SM8350, audio, compute, modem
and sensor for MTP platform and adds firmware for them.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210212115532.1339942-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add the property "regulator-names" to the regulators as given in
schematics so that it is easier to understand the regulators being used
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210204170907.63545-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enabled the UFS node found in SM8350-MTP platform, also add the
regulators associated with UFS HC and UFS phy to these nodes.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210204170907.63545-6-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enable both USB controllers and associated hsphy and qmp phy nodes
on sm8350 MTP. Designate the usb_1 instance as peripheral-mode only
until proper PMIC based Type-C dual-role handling is supported.
TODO: the second USB controller is exposed to a microAB port. Dual-
role can be supported for this by adding the "usb-role-switch"
property as well as defining a USB connector node with a
"gpio-usb-b-connector" compatible. However, this requires GPIO
support from PM8350 which is still missing.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210116013802.1609-3-jackp@codeaurora.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210204170907.63545-4-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add basic devicetree support for Qualcomm Technologies, Inc SM8350 SoC
MTP board. This enabled uart node and adds rpmh-regulators present for
this board.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127123054.263231-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
