| Age | Commit message (Collapse) | Author |
|---|
|
Add the reserved memory regions in QCS404
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
QCS404 has two EVBs, EVB-1000 and EVB-4000. These boards are mostly
similar with few differences in the peripherals used.
So use a common qcs404-evb.dtsi which contains the common parts and use
qcs404-evb-1000.dts and qcs404-evb-4000.dts for diffs
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add base dts files for QCS404 chipset along with cpu, timer,
gcc and uart2 nodes.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Switch to updated coresight bindings for hw ports
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The smd and smp2p drivers now support accessing the APCS GLOBAL IPC
register through the mailbox framework, so migrate the msm8996 dts to
use this and remove the syscon based APCS node.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The thermal zone uses spmi-temp-alarm as sensor, the trip points
correspond to the PMIC thermal stages 1 and 2. The critical trip
point at 125°C disables the partial PMIC shutdown at stage 2.
Without an IIO input the sensor only reports a limited number of
temperatures:
- 37°C for temperatures below 105°C
- 107°C for temperatures >= 105°C and < 125°C
- 127°C for temperatures >= 125°C
(the numbers correspond to a stage 1 threshold of 105°C)
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
This adds the spmi-temp-alarm node to pm8998 based on the examples in the
bindings.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
This adds the display clock controller node to sdm845 based on the
examples in the bindings.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add the SMP2P nodes for the remoteproc states for adsp, cdsp and slpi.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Set the various nodes to "okay" and hook up the regulators.
NOTE: For now the main USB port (the one that goes out the Type C
connector) is forced to host. Eventually someone will need to get the
Type C detection hooked up and get this all integrated with the
PMI8998 PMIC. The reason for forcing to "host" in the meantime is
that this will leave us with one "host" and one "peripheral" port.
In order for host mode this to work, we assume that the bootloader
left things configured enough for us. Apparently the magic for that
is is to do these writes on pmi8998:
- pm_comm_write_byte(2, 0x1153, 0x2C, 0);
- pm_comm_write_byte(2, 0x1152, 0x07, 0);
- pm_comm_write_byte(2, 0x1140, 0x00, 0);
- pm_comm_write_byte(2, 0x1140, 0x01, 0);
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add regulator devices for PMIC regulators managed via VRM and XOB
RPMh accelerators.
A few notes here:
- Regulators are added directly to the board file. While it's true
that this will mean a bunch of copy/pasting for other boards that
are very similar, this is probably the right call since boards
could make changes to the way these regulators are hooked up and
trying to find a way to avoid duplication will result in some
confusing node overrides.
- Regulators that are hooked up to supply pins on the SoC are given
an alias matching the name of that pin (pin name comes from the
Qualcomm SoC "device specification" doc).
- Other regulator labels are based on the schematic. If there is
more than one logical name on the schematic for the same rail the
secondary names are also listed and should be referred to as
appropriate.
- Regulators all default to HPM mode w/ no ability to switch modes.
Future patches can switch things to LPM and possibly add
dynamic load switching if we have determined there's a benefit.
This should only be done for rails where we'll actually be able
to take advantage of the lower power modes so we don't need to
churn with lots of patches adding regulator_set_load() calls
to drivers.
NOTE: This patch is loosely based on one originally shared to me by
David Collins.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
This adds nodes for USB and related PHYs.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
[dianders: reworked quite a bit]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
This patch adds the node to support AOSS reset driver on
SDM845
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[bjorn: Updated addresses to match the binding that was merged]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
DTS board files should always specify model and compatible.
All DTS board files that includes msm8996.dtsi
already specifies model and compatible, and will thus
override the model and compatible in msm8996.dtsi.
Drop model from msm8916.dtsi, since it is only a source of confusion.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
DTS board files should always specify model and compatible.
All DTS board files that includes msm8916.dtsi
already specifies model and compatible, and will thus
override the model and compatible in msm8916.dtsi.
Drop model and compatible from msm8916.dtsi,
since they are only a source of confusion.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add qcom,apq8096 to compatible string.
This compatible is defined in Documentation/devicetree/bindings/arm/qcom.txt
and is needed for e.g. drivers/cpufreq/qcom-cpufreq-kryo.c to be probed
correctly (and for drivers/cpufreq/cpufreq-dt-platdev.c to work properly).
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add pon, coincell and rtc to the first pm8998 sid.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add the adsp, modem and slpi smp2p nodes to msm8998.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add the QFPROM nvmem node to msm8998
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add the firmware and scm nodes for msm8998
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add reserve-memory nodes, tcsr-mutex nodes and the smem node.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add new dtsi file for the PMI8998, with its gpios and include all three
PMICs in the MSM8998 MTP dts.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add the two tsens instances and the thermal zones for CPUs, GPUs,
battery and skin sensors.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add nodes for RPM communication for MSM8998 and the regulator nodes for
the MTP.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add initial device tree support for the Qualcomm MSM8998 SoC and
MTP8998 evaluation board.
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Imran Khan <kimran@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[bjorn: Restructured, removed its node and moved to SPDX headers]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
This adds the adc node to pm8998 based on the examples in the
bindings. It also fixes the order of the included headers.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Resin is board specific, so add the resin node in apq8096-db820c dtsi
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Resin is board specific so add the resin node in apq8016-sbc dtsi
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add PON and pwrkey as child nodes for PON driver.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add PON and pwrkey as child nodes for PON device. Also
add additional properties for pwrkey i.e., linux,code
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.19 - Part 2
* Add thermal nodes for MSM8996 and SDM845
* tag 'qcom-arm64-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (21 commits)
arm64: dts: sdm845: Add tsens nodes
arm64: dts: msm8996: thermal: Initialise via DT and add second controller
soc: qcom: rmtfs-mem: fix memleak in probe error paths
soc: qcom: llc-slice: Add missing MODULE_LICENSE()
drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()
drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs
firmware: qcom: scm: add a dummy qcom_scm_assign_mem()
drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
drivers: qcom: rpmh-rsc: allow active requests from wake TCS
drivers: qcom: rpmh: add support for batch RPMH request
drivers: qcom: rpmh: allow requests to be sent asynchronously
drivers: qcom: rpmh: cache sleep/wake state requests
drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
drivers: qcom: rpmh: add RPMH helper functions
drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
drivers: soc: Add LLCC driver
dt-bindings: Documentation for qcom, llcc
...
|
|
SDM845 has two tsens blocks, one with 13 sensors and the other with 8
sensors. It uses version 2 of the TSENS IP, so use the fallback property to
allow more common code.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
We also split up the regmap address space into two, for the TM and SROT
registers. This was required to deal with different address offsets for the
TM and SROT registers across different SoC families.
8996 has two TSENS IP blocks, initialise the second one too.
Since tsens-common.c/init_common() currently only registers one address
space, the order is important (TM before SROT). This is OK since the code
doesn't really use the SROT functionality yet.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.19
* Add support for PM8005/PM8998 and related nodes
* Add/fix nodes on SDM845 for I2c, SPI, UART, and RPMH
* Fix BT LED trigger on DB410c
* Drop legacy clock names on MSM8916
* Add gpio line names on DB820c
* tag 'qcom-arm64-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: db410c: Fix Bluetooth LED trigger
arm64: dts: sdm845: Default qupv3_id_0 as "disabled" like _id_1
arm64: dts: msm8916: drop legacy suffix for clocks used by MSM DRM driver
arm64: dts: qcom: db820c: Add gpio-line-names property
arm64: dts: sdm845: Add rpmh-clk node
arm64: dts: sdm845: Add rpmh-rsc node
arm64: dts: qcom: sdm845: Enable debug UART and I2C10 on sdm845-mtp
arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes
arm64: dts: qcom: Add pm8005 and pm8998 support
arm64: dts: qcom: Add pmu node to sdm845
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Current LED trigger, 'bt', is not known/used by any existing driver.
Fix this by renaming it to 'bluetooth-power' trigger which is
controlled by the Bluetooth subsystem.
Fixes: 9943230c8860 ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
In commit 8e4947ee477d ("arm64: dts: qcom: sdm845: Add I2C, SPI, and
UART9 nodes") I accidentally forgot to add the line:
status = "disabled";
to qupv3_id_0 to match qupv3_id_1. Add it now. NOTE: right now the
only sdm845 board with a device tree in mainline is MTP and that board
currently doesn't have any peripherals under qupv3_id_0. If any board
was currently using peripherals under qupv3_id_0 then that board would
need to add this snippet to their board dts file:
&qupv3_id_0 {
status = "okay";
};
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Drop legacy suffix for clocks used by MSM DRM driver.
The _clk suffix has been deprecated since commit 20c3bb80235 ("drm/msm:
drop _clk suffix from clk names").
Fixes: 720c3bb80235 (drm/msm: drop _clk suffix from clk names)
The following warnings during boot have been seen since the referenced
fixes commit:
msm_dsi_phy 1a98300.dsi-phy: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm 1a00000.mdss: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm 1a00000.mdss: Using legacy clk name binding. Use "bus" instead of "bus_clk"
msm 1a00000.mdss: Using legacy clk name binding. Use "vsync" instead of "vsync_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "bus" instead of "bus_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "core" instead of "core_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "vsync" instead of "vsync_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "mdp_core" instead of "mdp_core_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "bus" instead of "bus_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "byte" instead of "byte_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "pixel" instead of "pixel_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "core" instead of "core_clk"
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add gpio-line-names property for Dragonboard820c based on APQ8096 SoC.
There are 4 gpio-controllers present on this board, including the
APQ8096 SoC, PM8994 (GPIO and MPP) and PMI8994 (GPIO).
Lines names are derived from 96Boards CE Specification 1.0, Appendix
"Expansion Connector Signal Description". Line names for PMI8994 MPP
pins are not added due to the absence of the gpio-controller support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
This adds the rpmh-clk node to sdm845 based on the examples in the
bindings.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
This adds the rpmh-rsc node to sdm845 based on the examples in the
bindings.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The debug UART is very useful to have. I2C10 is enabled as an example
of a I2C port we can talk on for now. Eventually we'll want to put
peripherals under it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
This adds nodes to SDM845-dtsi for all the I2C ports, all the SPI
ports, and UART9. Note that I2C / SPI / UART are a bit strange on
sdm845 because each "serial engine" has 4 pins associated with it and
depending on which firmware has been loaded into the serial engine
(loaded by the BIOS) the serial engine can behave like an I2C port, a
SPI port, or a UART. As per the landed bindings that means that we
need to create one node for each possible mode that the port could be
in. With 16 serial engines that means 16 x 3 = 48 nodes.
We get away with only creating 33 nodes for now because it seems very
likely that SDM845-based boards will actually all use the same UART
(UART 9) for debug purposes. While another UART could be used for
something like Bluetooth communication we can cross that path when we
come to it. Some documentation that I saw implied that using a UART
for "high speed" communications actually needs yet another different
serial engine firmware anyway.
Note that quick measurements adding all these nodes adds <10k of extra
space per dtb that they're included with. If this becomes a problem
we may need to think of a different way to structure this so that
boards only get the nodes they need (or figure out how to get dtc to
strip 'disabled' nodes). For now it seems OK.
These nodes were programmatically generated with a fairly dumb python
script. See http://crosreview.com/1091631 for the source.
NOTE: at the moment SPI chip select doesn't appear to work in my tests
with the latest posted SPI driver. All testing of SPI with this patch
has been done by hacking SPI to GPIO chip select.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add basic support for the pm8005 and pm8998 PMICs. For now just support
the GPIO controllers.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add the CPU PMU on sdm845 to get perf support for hardware events.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The ETF input should be connected to the funnel output, and the ETF
output should be connected to the replicator input. The labels are wrong
and these got swapped:
Warning (graph_endpoint): /soc/funnel@821000/ports/port@8/endpoint: graph connection to node '/soc/etf@825000/ports/port@1/endpoint' is not bidirectional
Warning (graph_endpoint): /soc/replicator@824000/ports/port@2/endpoint: graph connection to node '/soc/etf@825000/ports/port@0/endpoint' is not bidirectional
Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components")
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Access to UART0 is disabled by bootloaders. By leaving it enabled by
default would reboot the board.
Disable this for now, this would alteast give a board which boots.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm Device Tree Changes for v4.18 - Part 2
* Numerous updates for IPQ8074 and IPQ4019 based devices
* Add support for Sony Xperia Z1 Compact
* tag 'qcom-dts-for-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: ipq8074: Enable few peripherals for hk01 board
ARM: dts: ipq8074: Add pcie nodes
ARM: dts: ipq8074: Add peripheral nodes
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
ARM: dts: ipq4019: Change the max opp frequency
ARM: dts: ipq4019: Add a few peripheral nodes
ARM: dts: ipq4019: Add a default chosen node
ARM: dts: qcom: msm8974: Add Sony Xperia Z1 Compact
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This patch removes the unused bt-en-1-8v regulator and moves the
bt_en_gios claim to the pm8994_gpios node.
This bt_en_gpio could have been moved to the bluetooth serial node but
instead this node declares an 'enable' gpio addressing the bt_en_gpio.
This is needed by the Qualcomm QCA6174 WLAN/BT combo chip that needs to
have the bt_en_gpio claimed even if only WLAN is used.
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The property name vddpe-supply is not included in
Documentation/devicetree/bindings/pci/qcom,pcie.txt
nor in the pcie-qcom PCIe Root Complex driver.
This property name was used in an initial patchset for pcie-qcom,
but was renamed in a later revision.
Therefore, the regulator is currently never enabled, leaving us with
unoperational wlan.
Fix this by using the correct regulator property name, so that wlan
comes up correctly.
Fixes: 1c8ca74a2ea1 ("arm64: dts: apq8096-db820c: Enable wlan and bt en pins")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The UFS host controller occationally (20%) fails to enable
gcc_ufs_axi_clk because the UFS GDSC is not enabled. In most cases it's
enabled through the UFS phy driver, but to make sure it's enabled let's
enable it directly from the UFS host controller directly as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
