summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/xilinx
AgeCommit message (Collapse)Author
2022-03-26Merge tag 'usb-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 5.18-rc1. Nothing major in here, just lots of little improvements and cleanups and new device support. Highlights are: - list iterator fixups for when we walk past the end of the list (a common problem that was cut/pasted in almost all USB gadget drivers) - xen USB driver "hardening" for malicious hosts - xhci driver updates and fixes for more hardware types - xhci debug cable fixes to make it actually work again - usb gadget audio driver improvements - usb gadget storage fixes to work with OS-X - lots of other small usb gadget fixes and updates - USB DWC3 driver improvements for more hardware types - Lots of other small USB driver improvements - DTS updates for some USB platforms All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue() dt-bindings: usb: mtk-xhci: add compatible for mt8186 usb: dwc3: Issue core soft reset before enabling run/stop usb: gadget: Makefile: remove ccflags-y USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c usb: gadget: eliminate anonymous module_init & module_exit usb: usbip: eliminate anonymous module_init & module_exit xen/usb: harden xen_hcd against malicious backends usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue usb: dwc3: gadget: move cmd_endtransfer to extra function usb: dwc3: gadget: ep_queue simplify isoc start condition xen/usb: don't use arbitrary_virt_to_machine() usb: isp1760: remove redundant max_packet() macro usb: oxu210hp-hcd: remove redundant call to max_packet() macro usb: common: usb-conn-gpio: Make VBUS supply completely optional USB: storage: ums-realtek: fix error code in rts51x_read_mem() usb: early: xhci-dbc: Fix xdbc number parsing usb: early: xhci-dbc: Remove duplicate keep parsing x86/tsc: Be consistent about use_tsc_delay() usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body ...
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-02-08arm64: dts: zynqmp: Move USB clocks to dwc3 nodeSean Anderson
These clocks are not used by the dwc3-xilinx driver except to enable/disable them. Move them to the dwc3 node so its driver can use them to configure the reference clock period. Tested-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127200636.1456175-7-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29arm64: dts: zynqmp: Added GEM reset definitionsRobert Hancock
The Cadence GEM/MACB driver now utilizes the platform-level reset on the ZynqMP platform. Add reset definitions to the ZynqMP platform device tree to allow this to be used. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-24arm64: zynqmp: Rename dma to dma-controllerMichael Tretter
The ZynqMP dma engines are actually dma-controllers as specified by the device tree binding. Rename the device tree nodes accordingly. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20220112151541.1328732-4-m.tretter@pengutronix.de Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-24arm64: zynqmp: Add missing #dma-cells propertyMichael Tretter
Requesting the dma controllers fails if #dma-cells is not defined. Add the missing property. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20220112151541.1328732-3-m.tretter@pengutronix.de Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-24arm64: xilinx: dts: drop legacy property #stream-id-cellsDavid Heidelberg
Property #stream-id-cells is legacy leftover and isn't currently documented nor used. Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20211208184846.101166-1-david@ixit.cz Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-09-29arm64: zynqmp: Add support for Xilinx Kria SOM boardMichal Simek
There are couple of revisions of SOMs (k26) and associated carrier cards (kv260). SOM itself has two major versions: sm-k26 - SOM with EMMC smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware in QSPI. SOMs are describing only devices available on the SOM or connections which are described in specification (for example UART, fwuen). When SOM boots out of QSPI it uses limited number of peripherals defined by the specification and present in sm(k)-k26 dtses. Then a carrier card (CC) detection is happening and DT overlay is applied to brings new functionality. That's why DT overlays are used. The name is composed together with SOM name and CC name that's why DT overlays with these names are generated to make sure they can be used together. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1ba32590670434b650bacf6410a65579dd30b38b.1632294439.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Wire psgtr for zc1751-xm013Michal Simek
Add psgtr description for SATA and USB. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8c78625f08c16385a4798e0a62d20df7491ac00e.1628244860.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boardsMichal Simek
The commit 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms") finally add proper support for Xilinx dwc3 driver. This patch is adding DT description for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/640a3bc0dc3e32560d3e84c2f78b5ae561396eb0.1628244703.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Enable gpio and qspi for zc1275-revAMichal Simek
Add missing gpio and qspio for zc1275-revA board. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/839d833133318feeb2755c4431204b0ef4788cce.1628244299.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Fix serial compatible stringMichal Simek
Based on commit 65a2c14d4f00 ("dt-bindings: serial: convert Cadence UART bindings to YAML") compatible string should look like differently that's why fix it to be aligned with dt binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/89b36e0a6187cc6b05b27a035efdf79173bd4486.1628240307.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Remove not documented is-dual propertyMichal Simek
Remove is-dual not documented property and also update comment about QSPI sizes to reflect dual configuration as 16MB + 16MB. Only single configuration is supported now. Reported-by: Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/876c53b92f99623bae45d5c0c5ae79ee3e24f745.1628239345.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add psgtr description to zc1751 dc1 boardMichal Simek
Wire psgtr for zc1751 dc1 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/51d9a5e0aa26b0ea79b8823bf3d15f4e2542f927.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add support for zcu102-rev1.1 boardMichal Simek
zcu102 rev1.1 compare to rev1.0 is using by default different DDR memory which requires different configuration. The reason for adding this file to Linux kernel is that U-Boot fdtfile variable is composed based on board revision (in eeprom) and dtb file should exist in standard distibutions for passing it to Linux kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/38bbbeb885f4d9ba466c43ab9b4d25190a3552fb.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Remove description for 8T49N287 and si5382 chipsMichal Simek
Based on commit 73d677e9f379 ("arm64: dts: zynqmp: Remove si5328 device nodes") also remove description for clock chips which don't have Linux driver yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/7557288230567fa136ba3edc004d5bfe4f4c6590.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Sync psgtr node location with zcu104-revAMichal Simek
zcu104-revA has node below pinctrl which is not the same on revC. Sync location for easier comparison. Also zc1751-dc1 is not using this position. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/4b691bab5ba83b5352d4669bd54bcdb8273b2156.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add reset description for sataMichal Simek
Sata needs to get reset before configuration that's why add property for it there. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/b7f61daa2fe1a2300767af73c46b8082088f741a.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Move rtc to different location on zcu104-revAMichal Simek
Move it the same location as is on zcu104-revC for easier comparison. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/fe6c3f96fbd359409b7fef85d2c2ada584b3d0cc.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Wire qspi on multiple boardsMichal Simek
Couple of boards have qspi on the board that's why enable controller and describe them. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/01a69ee6590245b5bee70a2553f6faac0d31ca76.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Remove information about dma clock on zcu106Michal Simek
Clock setting is not static anymore that's why it depends on firmware setup that's why remove this comment. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/17973ffda4e163a4b89d4732fe6fc7e089962ae7.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Update rtc calibration valueSrinivas Neeli
As per the design specification "The 16-bit Seconds Calibration Value represents the number of Oscillator Ticks that are required to measure the largest time period that is less than or equal to 1 second. For an oscillator that is 32.768 KHz, this value will be 0x7FFF." Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0d36d9fe999ff82f10d42ab5fc0d1e907c26ac34.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add note about UHS mode on some boardsMichal Simek
Add note about UHS mode and add no-1-8-v property to zc1751-dc1 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/462b95844e7aedb00768035913265d7af90c3b2f.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Move DP nodes to the end of file on zcu106Michal Simek
This location is used by others DTs files that's why this move. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/d14404afd846f975a421023e9e9b6ad18585719f.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Remove can aliases from zc1751Michal Simek
Networking subsystem is not using aliases that's why remove them for can devices. There is also no any other Xilinx ZynqMP DT file with them. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/475a60fc4d01ba9c61579801fb84620b6905dcad.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add reset-on-timeout to all boards and modify default timeout ↵Mounika Grace Akula
value This patch adds reset-on-timeout to FPD WDT which will trigger an interrupt to PMU when watchdog expiry happens and PMU takes the necessary action. If this property is not enabled, reason will not be known when watchdog expiry happens. This patch also modifies the default timeout to 60 seconds. Reason is that if u-boot enables WDT, it will set the timeout to 10 seconds and this is not enough to boot till Linux and start the WDT application in Linux. 60 seconds is the maximum safest value to boot till Linux and start the WDT application. Users need to change this timeout value to fit their needs. Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/5848a81447921240fddfe2f5749ae0746fcbbdbd.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: List reset property for ethernet phyMichal Simek
Add information about reset gpio for ethernet phy in case someone wants to use it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/e153f0cda37a2a6ea1c6e11fb0a4af1d400f29e2.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add nvmem alises for eepromsMichal Simek
Use nvmem alias to point to eeprom memory which contains information about board. The change is done based on discussion in the link below. Link: https://lore.kernel.org/r/CAL_JsqLMDqpkyg-Q7mUfw-XH67-v068Q6e9wTq2UOoN=0-_coQ@mail.gmail.com Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/9b860b47ec3ca64340b4d29317e92b667236d7d1.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Move clock node to zynqmp-clk-ccf.dtsiMichal Simek
Using clock firmware driver is not the only one option how to configure clock. In past fixed clocks were also used and that configuration is still valid that's why move clock firmware node to the same file where zynqmp_clk references are used. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/48bfd8cf0de4d10b9c4d745218595f28954f70d5.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Remove additional newlineMichal Simek
This is sync between Linux and U-Boot. Trivial change. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/16f6f41c8d748d3c7cd4f49b2839e63a5b41c944.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Enable nand driver for dc2 and dc3Michal Simek
Add description for nand devices on zc1751 dc2 and dc3 boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/e103821bdb717132559e780f1a4f4f6fefc95688.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Wire DP and DPDMA for dc1/dc4Michal Simek
Enable Display Port and Display Port DMA for zc1751 dc1 and dc4. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/dbbd212bcc587e835d6df2f91622f5baa124bff5.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add missing mio-bank properties to dc1 and dc5Michal Simek
Add missing mio-bank properties to zc1751 dc1 and dc5 boards. The same change was done by commit 63481699d6e3 ("arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis"). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/2b2ab31639c706651dfd319f5b6bc59e68f111b6.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add missing SMID for pcie to zynqmp.dtsiStefano Stabellini
The SMMU is disabled in device tree so this change has no impact. The benefit is that this way it is in sync with xen.dtsi. Xen enables the SMMU and makes use of it. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/43f21f5033f7806fba049474bced6131c8cb98ba.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Disable WP on zcu111Michal Simek
On this board there is SD slot without WP connected. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/88e41d4f5c6a7353762bd5ad38b92ce352c3a123.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add phy description for usb3.0Michal Simek
usb3.0 requires serdes setting that's why also wire it up. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/cd856e5f87bc967373691d04e79de3d0022ef424.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Correct psgtr description for zcu100-revCMichal Simek
Enable psgtr node and also fix clock names to be aligned with other zynqmp boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/bd35fdaac08208578b2bb5059ba2c59bb4e66dac.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Wire psgtr for zc1751-xm015Michal Simek
Add psgtr description for SATA and USB. Display Port could be also added but it wasn't tested yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3fb11fdb9ade828fa174379515e45ba02bc17247.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Correct zcu111 psgtr descriptionMichal Simek
DP and SATA psgtrs are swapped. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d47cbf374423cb71bb4be5e45e3d834da0c4673a.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add pinctrl description for all boardsMichal Simek
The commit 1dccb5ec0123 ("dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver") and commit 8b242ca700f8 ("pinctrl: Add Xilinx ZynqMP pinctrl driver support") add support for Xilinx ZynqMP pinctrl driver that's why describe pins configuration for current boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d8bc42600da85f5a23d977d4b61e6528720573e5.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Fix irps5401 device nodesMichal Simek
- Add compatible string for irps5401 chip. - Do not use irps54012 as device node which is not correct. - Fix addresses of irps5401/u180 on zcu104 revisions. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/10bf5f9e7a18579626fb1850e3a8a7476ba6f2ed.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Enable fpd_dma for zcu104 platformsMichal Simek
Enable fpd_dma for this board. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/76d330bf2b2414efa2e98965a3ca7f7c43e3645f.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Do not duplicate flash partition label propertyAmit Kumar Mahapatra
In kernel 5.4, support has been added for reading MTD devices via the nvmem API. For this the mtd devices are registered as read-only NVMEM providers under sysfs with the same name as the flash partition label property. So if flash partition label property of multiple flash devices are identical then the second mtd device fails to get registered as a NVMEM provider. This patch fixes the issue by having different label property for different flashes. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/6c4b9b9232b93d9e316a63c086540fd5bf6b8687.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Disable CCI by defaultMichal Simek
There is no reason to have CCI no enabled by default. Enable it when your system configuration requires it. In Xilinx configuration flow this is work for Device Tree Generator which reads information from HW Design configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f507d45fbaa0bd31f641e758efa40a2532466ced.1623684253.git.michal.simek@xilinx.com
2021-03-08arm64: dts: zynqmp: Remove si5328 device nodesQuanyang Wang
The function of_i2c_get_board_info will call of_modalias_node to check if a device_node contains "compatible" string. But for the device si5328 at zcu102/zcu106 boards, there is no proper DT bindings for them. So remove si5328 device nodes from dts files to eliminate the error info in the boot message: i2c i2c-10: of_i2c: modalias failure on /axi/i2c@ff030000/i2c-mux@74/i2c@4/clock-generator@69 i2c i2c-10: Failed to create I2C device for /axi/i2c@ff030000/i2c-mux@74/i2c@4/clock-generator@69 Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210308115437.2232847-1-quanyang.wang@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-08arm64: dts: zynqmp: Add power domain for the DisplayPort DMA controllerLaurent Pinchart
The DisplayPort DMA controller (DPDMA) is located in the same power domain as the DisplayPort Subsystem (DPSUB). Specify the power domain in the device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210306230915.14979-1-laurent.pinchart@ideasonboard.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-01arm64: dts: zynqmp: Wire up the DisplayPort subsystemLaurent Pinchart
Enable the dpsub device and wire it up to the PS-GTR PHY lanes routed to the DisplayPort connector. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/9769d4d103b6eb75e3324825117f6832a746004e.1611232558.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add DisplayPort subsystemMichal Simek
Add a DT node for the DisplayPort subsystem, a hard IP present in the Zynq Ultrascale+ MPSoC. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/4d978aef852cacdfb35aa8e50d648a787e73b90c.1611232558.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add DPDMA nodeLaurent Pinchart
Add a DT node for the DisplayPort DMA engine (DPDMA). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3d11015512a085592f2aca76eeddc04178d38bbe.1611232558.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add description for zcu104 revCMichal Simek
Xilinx ZynqMP zcu104 revC and newer board revisions have different i2c structure compare to revA. The rest of the board is the same from software perspective. Also enable DMAs and QSPI. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/17f68c235ea1ce96c3293ca0cf3178951d6663f7.1611224800.git.michal.simek@xilinx.com
generated by cgit (git 2.34.1) at 2025-04-15 04:48:41 +0000