Age | Commit message (Collapse) | Author |
|
"simple-panel" compatible is not documented and nothing in Linux kernel
binds to it:
imx8mq-mnt-reform2.dtb: panel: compatible: ['innolux,n125hce-gn1', 'simple-panel'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The DSA framework has got more picky about always having a phy-mode
for the CPU port. The imx8mq Ethernet is being configured to RMII. Set
the switch phy-mode based on this.
Additionally, the cpu label has never actually been used in the
binding, so remove it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux
Pull hardware timestamp engine updates from Dipen Patel:
"The changes for the hte subsystem include:
- Add Tegra234 HTE provider and relevant DT bindings
- Update MAINTAINERS file for the HTE subsystem"
* tag 'for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux:
hte: tegra-194: Use proper includes
hte: Use device_match_of_node()
hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
hte: tegra: fix 'struct of_device_id' build error
hte: Use of_property_present() for testing DT property presence
gpio: tegra186: Add Tegra234 hte support
hte: handle nvidia,gpio-controller property
hte: Deprecate nvidia,slices property
hte: Add Tegra234 provider
hte: Re-phrase tegra API document
arm64: tegra: Add Tegra234 GTE nodes
dt-bindings: timestamp: Deprecate nvidia,slices property
dt-bindings: timestamp: Add Tegra234 support
MAINTAINERS: Add HTE/timestamp subsystem details
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.4-rc1.
Nothing major, just lots of tiny, constant, forward development. This
includes:
- obligatory n_gsm updates and feature additions
- 8250_em driver updates
- sh-sci driver updates
- dts cleanups and updates
- general cleanups and improvements by Ilpo and Jiri
- other small serial driver core fixes and driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (87 commits)
n_gsm: Use array_index_nospec() with index that comes from userspace
tty: vt: drop checks for undefined VT_SINGLE_DRIVER
tty: vt: distribute EXPORT_SYMBOL()
tty: vt: simplify some cases in tioclinux()
tty: vt: reformat tioclinux()
tty: serial: sh-sci: Fix end of transmission on SCI
tty: serial: sh-sci: Add support for tx end interrupt handling
tty: serial: sh-sci: Fix TE setting on SCI IP
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support
serial: max310x: fix IO data corruption in batched operations
serial: core: Disable uart_start() on uart_remove_one_port()
serial: 8250: Reinit port->pm on port specific driver unbind
serial: 8250: Add missing wakeup event reporting
tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform
tty: serial: fsl_lpuart: adjust buffer length to the intended size
serial: fix TIOCSRS485 locking
serial: make SiFive serial drivers depend on ARCH_ symbols
tty: synclink_gt: don't allocate and pass dummy flags
tty: serial: simplify qcom_geni_serial_send_chunk_fifo()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
The "biggest" thing in here is the removal of two obsolete drivers,
u132-hcd and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems"
* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
usb: dwc3: gadget: Execute gadget stop after halting the controller
media: radio-shark: Add endpoint checks
USB: sisusbvga: Add endpoint checks
USB: core: Add routines for endpoint checks in old drivers
usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
usb: dwc3: core: add support for disabling High-speed park mode
dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
usb: mtu3: add optional clock xhci_ck and frmcnt_ck
dt-bindings: usb: mtu3: add two optional clocks
usb: mtu3: expose role-switch control to userspace
usb: mtu3: unlock @mtu->lock just before giving back request
usb: mtu3: fix kernel panic at qmu transfer done irq handler
usb: mtu3: use boolean return value
usb: mtu3: give back request when rx error happens
usb: chipidea: fix missing goto in `ci_hdrc_probe`
usb: gadget: udc: core: Prevent redundant calls to pullup
usb: gadget: udc: core: Invoke usb_gadget_connect only when started
usb: typec: ucsi: don't print PPM init deferred errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
|
Add GTE LIC and AON GPIO nodes for the tegra234 SoC.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
|
|
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
|
|
Update the compatible for the Realtek RTL8821CS bluetooth node.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.4 (part 1)
Enlarge PCI memory window on Machiatobin (Armada 7040 based)
Add supoport for the GL.iNet GL-MV1000 (Armada 3700 based)
Add missing phy-mode on the cn9310
Align thermal node names with bindings
* tag 'mvebu-dt64-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM64: dts: marvell: cn9310: Add missing phy-mode
arm64: dts: marvell: add DTS for GL.iNet GL-MV1000
arm64: dts: marvell: align thermal node names with bindings
arm64: dts: marvell: mochabin: enlarge PCI memory window
Link: https://lore.kernel.org/r/87bkjlzfcw.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
On the Rock5b a fix the newly added rtc node and cpu-regulators for the big
cluster. Volume-keys (via adc) for the Pinephone Pro, display support for
the Anbernic RG353. As well as gpio-ranges for rk356x and fixes for the
audio-codec node-names on two boards.
* tag 'v6.4-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
arm64: dts: rockchip: add panel to Anbernic RG353 series
Link: https://lore.kernel.org/r/5144826.MHq7AAxBmi@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
These are implemented via regular ADC, so regular polling is needed,
for these keys to work.
Co-developed-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20230405123813.2272919-1-pbrobinson@gmail.com
[increased Volume-Down voltage to 600mV as suggested by Ondrej]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
soc/dt
Apple SoC DT updates for 6.4 (v2).
A late addition to the tree, adding the PWM controllers and associated
keyboard backlight nodes, since that driver and its bindings are now
on the way to 6.4.
* tag 'asahi-soc-dt-6.4-v2' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
Link: https://lore.kernel.org/r/d0862463-acb3-ce83-6493-281a833ec87e@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The RK8602 and RK8603 voltage regulators on the Rock 5B board provide
the power lines vdd_cpu_big0 and vdd_cpu_big1, respectively.
Add the necessary device tree nodes and bind them to the corresponding
CPU big core nodes.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230414125425.124994-4-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Use generic 'audio-codec' name for es8316 node on Pinebook Pro and Rock
5B boards.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230414125425.124994-3-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The hym8563 RTC driver doesn't handle the 'clock-frequency' property,
which is also indicated by the following dtbs_check warning:
rk3588-rock-5b.dtb: rtc@51: Unevaluated properties are not allowed ('clock-frequency' was unexpected)
From schema: Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml
Drop the unsupported property.
Fixes: 1e9c2404d887 ("arm64: dts: rockchip: Enable RTC support for Rock 5B")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230414125425.124994-2-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch adds the device tree entries for the PWM controller
present on M2 macbooks that is connected to the keyboard backlight.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Adds PWM controller and keyboard backlight bindings for M1 Pro/Max MacBook Pros
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Adds PWM controller and keyboard backlight bindings for M1 MacBooks
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add gpio-range properties to the pinctrl gpio nodes in rk356x.dtsi
Signed-off-by: John Clark <inindev@gmail.com>
Link: https://lore.kernel.org/r/20230413170337.6815-1-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt
mt6795
- enable frequency hopping controller (FHCTL)
- add i2c, power domains and some clocks for video enconde/decode
- Sony Xperia M5 enable touchscreen, proximity sensor, accelerometer
and NFC
mt8173
- align keys with DT binding
mt8183
- enable GPU DVFS
mt8186
- enable GPU
mt8192
- enable GPU
mt8195
- add mutex for Video Processor Pipeline Subsystem (VPP)
- add support for Mali-G57 Valhall Natt GPU baked by panfrost
- add support for display on vdosys1
- add thermal support
- add display PWM
mt8365
- add support for the eval kit including i2c, pmic-wrapper, mmc and
ethernet
* tag 'v6.3-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (50 commits)
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: mediatek: mt8173: correct GPIO keys wakeup
arm64: dts: mediatek: mt6795-xperia-m5: Add NXP PN547 NFC on I2C3
arm64: dts: mediatek: mt6795-xperia-m5: Add Sensortek STK3310 Proximity
arm64: dts: mediatek: mt6795-xperia-m5: Add Synaptics RMI4 Touchscreen
arm64: dts: mediatek: mt6795-xperia-m5: Enable I2C 0-3 busses
arm64: dts: mediatek: mt6795: Add VDECSYS and VENCSYS clocks
arm64: dts: mediatek: mt6795: Add SoC power domains
arm64: dts: mediatek: mt6795: Add nodes for I2C controllers
arm64: dts: mediatek: mt6795: xperia-m5: Enable Frequency Hopping
arm64: dts: mediatek: mt6795: Add apmixedsys syscon node
arm64: dts: mediatek: mt6795: Add Frequency Hopping Controller node
arm64: dts: mediatek: cherry: Add configuration for display backlight
arm64: dts: mediatek: mt8195: Add display pwm nodes
arm64: dts: mediatek: mt8195: Add temperature mitigation threshold
arm64: dts: mediatek: mt8195: Add thermal zones and thermal nodes
arm64: dts: mediatek: add ethernet support for mt8365 SoC
arm64: dts: mediatek: add mmc support for mt8365 SoC
...
Link: https://lore.kernel.org/r/6920736b-ddb3-29df-d0b2-46db40cef49f@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM64 Devicetree updated for v6.4
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
* tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
arm64: dts: qcom: Add base qrb4210-rb2 board dts
arm64: dts: qcom: sm8550: add Soundwire controllers
arm64: dts: qcom: sm8250: Add GPU speedbin support
arm64: dts: qcom: sm8150: Add GPU speedbin support
arm64: dts: qcom: sm8150: Don't start Adreno in headless mode
arm64: dts: qcom: ipq5332: add support for the RDP468 variant
arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node
arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi
arm64: dts: qcom: sm6115p-j606f: Enable remoteprocs
arm64: dts: qcom: sm6115: Add RMTFS
arm64: dts: qcom: sm6115-j606f: Add ramoops node
arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config
arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node
arm64: dts: MSM8953: Add lpass nodes
arm64: dts: MSM8953: Add mpss nodes
arm64: dts: MSM8953: Add wcnss nodes
arm64: dts: qcom: sm8350: remove superfluous "input-enable"
arm64: dts: qcom: sm8150: remove superfluous "input-enable"
arm64: dts: qcom: apq8016: remove superfluous "input-enable"
arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
...
Link: https://lore.kernel.org/r/20230414031550.2412379-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 6.4, please pull the following:
- Rob fixes the GICv3 ITS node name for the Stingray platforms
- William adds the new-style High Speed SPI controller nodes to the BCA
SocS
- Rafal fixes the NAND controller interrupt name for BCM4908, LED
node(s) and procmon for BCM4908. He also adds support for the USB
ports, and declares USB triggered LEDs for the Netgear R8000P and
TP-Link C2300.
* tag 'arm-soc/for-6.4/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB LED triggers
arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB LED triggers
arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports
arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename
arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name
arm64: dts: broadcom: bcmbca: Add spi controller node
arm64: dts: broadcom: stringray: Fix GICv3 ITS node name
Link: https://lore.kernel.org/r/20230410232606.1917803-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.4
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
* tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits)
arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
arm64: dts: qcom: sc8280xp: Define uart2
arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
arm64: dts: qcom: sa8775p: pmic: add thermal zones
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
arm64: dts: qcom: sa8775p: pmic: add the power key
arm64: dts: qcom: sa8775p: add the Power On device node
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
arm64: dts: qcom: sa8775p: add the spmi node
arm64: dts: qcom: sa8775p: add the pdc node
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
arm64: dts: qcom: sdm845-tama: Enable GPU
arm64: dts: qcom: sdm845-tama: Enable remoteprocs
...
Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.4
New features:
* Overlays for CPSW9G and CPSW5G on J721e-evm, J7200-evm
* Add support for AM625 based BeaglePlay, AM62-LP-SK
* Audio, RTC, watchdog support for AM625
* McSPI for J7200,j721e, j721s2, J784s4
* ADC for j721s2
* Crypto acceleration, CPSW2G for J784s4
Non critical fixes:
AM62, AM62a:
* Fix schematics error to increase DDR to 4GB on AM62a-SK
* L2Cache size fix (AM62a/AM625)
* ti,vbus-divider property to USB1 on AM625-SK
* Gpio count fix for AM625
J7200,j721e, j721s2, J784s4, AM68, AM69:
* ti,sci-dev-id for J784s4 NAVSS nodes
* j721e-sk: Drop application specific firmware name
* am68-sk: Fix the gpio expander lines for production version
Cleanups:
* Pinmux header move to dt folder (next kernel PR, we will drop the uapi header).
* j721e: ti,strobe-sel property cleanup for descoped HS400 MMC operation
* tag 'ti-k3-dt-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (34 commits)
arm64: dts: ti: k3-j784s4-evm: Add eMMC mmc0 support
arm64: dts: ti: Enable audio on SK-AM62(-LP)
arm64: dts: ti: k3-am62-main: Add McASP nodes
arm64: dts: ti: k3-j784s4: Add MCSPI nodes
arm64: dts: ti: k3-j721s2: Add MCSPI nodes
arm64: dts: ti: k3-j7200: Add MCSPI nodes
arm64: dts: ti: k3-j721e: Add MCSPI nodes
arm64: ti: dts: Add support for AM62x LP SK
arm64: dts: ti: Refractor AM625 SK dts
dt-bindings: arm: ti: k3: Add compatible for AM62x LP SK
arm64: dts: ti: k3-am625-sk: Add ti,vbus-divider property to usbss1
arm64: dts: ti: k3-am68-sk-base-board: Update IO EXP GPIO lines for Rev E2
arm64: dts: ti: Add k3-am625-beagleplay
dt-bindings: arm: ti: Add BeaglePlay
arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode
arm64: dts: ti: j7200-main: Add CPSW5G nodes
arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports in QSGMII mode
arm64: dts: ti: k3-j721e: Add CPSW9G nodes
arm64: dts: ti: k3-j784s4-evm: Enable MCU CPSW2G
arm64: dts: ti: k3-j721s2-common-proc-board: Add pinmux information for ADC
...
Link: https://lore.kernel.org/r/20230410140521.3u3fftgnejakqnzj@shakable
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.4 (take two)
- Add PWM support for the R-Car H1 and H2 SoCs,
- Add slide switch and I2C support for the Marzen development board,
- Add SCI (serial) and Camera support for the RZ/G2L SoC and the
RZ/G2L SMARC EVK development board,
- Add IOMMU support for the R-Car V4H SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779a0: Revise renesas,ipmmu-main
arm64: dts: renesas: falcon-csi-dsi: Set bus-type for MAX96712
arm64: dts: renesas: r8a779g0: Add iommus to MMC node
arm64: dts: renesas: r8a779g0: Add iommus to DMAC nodes
arm64: dts: renesas: r8a779g0: Add IPMMU nodes
arm64: dts: renesas: r8a779f0: Revise renesas,ipmmu-main
arm64: dts: renesas: rzg2l-smarc: Enable CRU, CSI support
arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes
arm64: dts: renesas: r9a07g044: Enable SCI0 using DT overlay
ARM: dts: r8a7790: Add PWM device nodes
ARM: dts: r8a7790: Add TPU device node
ARM: dts: marzen: Enable I2C support
ARM: dts: marzen: Add slide switches
ARM: dts: r8a7779: Add PWM support
dt-bindings: clock: r8a7779: Add PWM module clock
arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes
Link: https://lore.kernel.org/r/cover.1681113117.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: OrangePi R1 Plus, NanoPi R2C + R5C + R5S, Khadas Edge2.
General RK3588 additions: audio, thermal management, sdmmc, clock fixes,
watchdog; RK3588-Rock5b: rtc, pwm, audio.
Display support for Odroid Go Super and PinephonePro.
And some misc adaptions for recently merged yaml binding conversions.
* tag 'v6.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits)
arm64: dts: rockchip: correct panel supplies on Odroid Go Super
arm64: dts: rockchip: Add rk3588-rock-5b analog audio
arm64: dts: rockchip: Add I2S rk3588 nodes
arm64: dts: rockchip: Add rk3588s I2S nodes
arm64: dts: rockchip: Assign PLL_PPLL clock rate to 1.1 GHz on rk3588s
arm64: dts: rockchip: Fix SCMI assigned clocks on rk3588s
arm64: dts: rockchip: add rk3588 thermal sensor
arm64: dts: rockchip: Add pwm-fan to rk3588-rock-5b
arm64: dts: rockchip: Enable RTC support for Rock 5B
arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS
dt-bindings: Add doc for Xunlong OrangePi R1 Plus LTS
arm64: dts: rockchip: Add FriendlyARM NanoPi R2C
dt-bindings: Add doc for FriendlyARM NanoPi R2C
arm64: dts: rockchip: Add touchscreen support to rk3399-pinephone-pro
arm64: dts: rockchip: Add internal display support to rk3399-pinephone-pro
dt-bindings: watchdog: rockchip: Add rockchip,rk3588-wdt string
arm64: dts: rockchip: Enable watchdog support for RK3588
arm64: dts: rockchip: remove hclk from dsi node on rk356x
arm64: dts: rockchip: rename vbus-supply to phy-supply in rk3566-box-demo.dts
arm64: dts: rockchip: fix rk3399 dp node
...
Link: https://lore.kernel.org/r/7289562.MhkbZ0Pkbq@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- added D1 crypto node
- enabled DVFS on OrangePi PC2 board
- added GPIO line names on Nezha D1 board
- added suniv USB nodes and enabled on licheepi-nano
- new suniv boards: PopStick v1.1 and Lctech Pi
- added Allwinner T113-s DTSI
- added MangoPi MQ-R T113-s board variant
- swapped DMA names for A23, A31, A33, D1, H3, H5, V3s
* tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sunxi: add MangoPi MQ-R-T113 board
dt-bindings: arm: sunxi: document MangoPi MQ-R board names
ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi
dts: add riscv include prefix link
ARM: dts: suniv: Add Lctech Pi F1C200s devicetree
ARM: dts: suniv: add device tree for PopStick v1.1
dt-binding: arm: sunxi: add two board compatible strings
dt-bindings: vendor-prefixes: add Source Parts and Lctech names
ARM: dts: suniv: licheepi-nano: enable USB
ARM: dts: suniv: add USB-related device nodes
riscv: dts: nezha-d1: add gpio-line-names
arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFS
riscv: dts: allwinner: d1: Add crypto engine node
Link: https://lore.kernel.org/r/20230408125156.GA17050@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.4:
- New board device trees: Apalis quadmax, DH electronics i.MX8M Plus
DHCOM and PDK3, Data Modul i.MX8M Plus eDM SBC, Colibri Aster and
Iris, etc.
- Add FlexSPI, BBNSM and TPM PWM devices for i.MX93 SoC.
- A series of imx8mq-librem5 udpates which includes minor fixes,
magnetometer, CSI/camera support, and powersaving improvements.
- Add Cadence USB3 support for i.MX8QXP.
- Add FlexCAN support for i.MX8QXP and i.MX8QM.
- Add UART DMA support for i.MX8MQ.
- Add GPT devices for i.MX8MP.
- Add VPU decoder and encoder support for i.MX8QM.
- Add display pipeline and PCIe EP support for i.MX8M family SoCs.
- A series from Peng Fan updating various i.MX8M device trees to pinctrl
nodes match DT schema.
- A series from Philippe Schenker improving colibri-imx8x device trees
in various aspects.
- Other random device tree updates.
* tag 'imx-dt64-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (87 commits)
arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Add display pipeline components
arm64: dts: imx8mn: Add display pipeline components
arm64: dts: imx8mm: Add display pipeline components
arm64: dts: freescale: imx8qxp-mek: enable cadence usb3
arm64: dts: imx8qxp: add cadence usb3 support
arm64: dts: imx8mq-librem5: add missing #clock-cells
arm64: dts: imx8mm-prt8mm: update pinctrl to match dtschema
arm64: dts: imx8mn-bsh-smm: update pinctrl to match dtschema
arm64: dts: imx8mm-emcon: update pinctrl to match dtschema
arm64: dts: imx8mq-librem5: update pinctrl to match dtschema
arm64: dts: imx8mm-ddr4-evk: update gpmi pinctrl to match dtschema
arm64: dts: imx8mn-evk: update i2c pinctrl to match dtschema
arm64: dts: imx8mp: Add GPT blocks
arm64: dts: imx8-apalis-v1.1: drop ci-disable-lpm
arm64: dts: imx8dxl: drop clocks from scu clock controller
arm64: dts: imx8mp: verdin-yavia: drop disable-over-current
arm64: dts: imx8mq: tqma8mq-mba8mx: drop disable-over-current
arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK3
arm64: dts: colibri-imx8x: Add iris v2 carrier board
...
Link: https://lore.kernel.org/r/20230408101928.280271-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.4-rc1
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
* tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add vccmq on Jetson TX2
arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin
arm64: tegra: Audio codec support on Jetson AGX Orin
arm64: tegra: Support Jetson Orin NX reference platform
arm64: tegra: Support Jetson Orin NX
dt-bindings: tegra: Document Jetson Orin NX reference platform
dt-bindings: tegra: Document Jetson Orin NX
arm64: tegra: Add DSU PMUs for Tegra234
arm64: tegra: Drop serial clock-names and reset-names
Link: https://lore.kernel.org/r/20230406124804.970394-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Apple SoC DT updates for 6.4.
This time we have the M2 (t8112) device trees and compatible updates,
as well as a minor fix for PCIe ports on the prior models.
* tag 'asahi-soc-dt-6.4' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t600x: Disable unused PCIe ports
arm64: dts: apple: t8103: Disable unused PCIe ports
arm64: dts: apple: t8112: Initial t8112 (M2) device trees
dt-bindings: arm: apple: Add t8112 j413/j473/j493 compatibles
dt-bindings: clock: apple,nco: Add t8112-nco compatible
dt-bindings: i2c: apple,i2c: Add apple,t8112-i2c compatible
dt-bindings: pinctrl: apple,pinctrl: Add apple,t8112-pinctrl compatible
dt-bindings: pci: apple,pcie: Add t8112 support
dt-bindings: nvme: apple: Add apple,t8112-nvme-ans2 compatible string
dt-bindings: mailbox: apple,mailbox: Add t8112 compatibles
dt-bindings: iommu: apple,sart: Add apple,t8112-sart compatible string
dt-bindings: interrupt-controller: apple,aic2: Add apple,t8112-aic compatible
dt-bindings: arm: cpus: Add apple,avalanche & blizzard compatibles
dt-bindings: watchdog: apple,wdt: Add t8112-wdt compatible
dt-bindings: arm: apple: apple,pmgr: Add t8112-pmgr compatible
dt-bindings: power: apple,pmgr-pwrstate: Add t8112 compatible
Link: https://lore.kernel.org/r/7263df01-aebc-2db5-f074-4805e0ae9fbc@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.4
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add mmc aliases
arm64: dts: exynos: drop mshc aliases
arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC
arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
A few more Qualcomm ARM64 DeviceTree fixes for 6.3
The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had
to be corrected in the driver, this fixes the polarity in the DeviceTree
for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630.
The recent rearrangement of nodes among the IPQ8074 accidentally enabled
the PCIe PHYs, rather than the PCIe controllers. This is being
corrected, to restore PCIe functionality.
PMK8280 PON node has the wrong compatible, which recently caused the
driver to stop probing. This is corrected and the required "pbs" region
is added.
With support for HBR3 introduced, it's noted that SC7280 Herobrine
devices are having trouble running at this rate. This drops the claim
that it's supported, until further analysis can be done.
* tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node
arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node
arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity
Link: https://lore.kernel.org/r/20230410153850.4752-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
arm64: dts: rockchip: add rk3588 cache level information
arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
ARM: dts: rockchip: fix a typo error for rk3288 spdif node
arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name
Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'arm/omap', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'ppc/pamu', 'unisoc', 'x86/vt-d', 'x86/amd', 'core' and 'platform-remove_new' into next
|
|
Prepare for the MM nodes whose dma-ranges(iova range) is 16GB.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-15-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
After commit f1ad5338a4d5 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges property is not allowed for
the leaf node. But our iommu/dma-ranges is 16GB, we still expect
separate the 16GB dma-range like:
a) display is in 0 - 4GB;
b) vcodec is in 4GB - 8GB;
c) camera is in 8GB - 12GB.
We can not expect all the masters add a parent node for them,
especial for the existed drivers/nodes.
Thus, we add whole the 16GB dma-ranges in the parent "soc" node.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-14-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
After we add the dma-ranges in the parent "soc" node,
this property is unnecessary for the leaf node.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-13-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This smartphone features a Bosch BMM050 Magnetometer on I2C3: enable
it with the BMM150 binding, as that driver supports BMM050 as well.
For this sensor, there is no interrupt pin;
readings were validated in sysfs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230412112739.160376-28-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the BMA255 Accelerometer on I2C3 and its pin definitions.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230412112739.160376-27-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The PWM at 0x11006000 is the tertiary PWM; unlike PWM0, PWM1, this is
not display specific and can be used as a generic PWM controller.
This node is left disabled as usage is board-specific.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230412112739.160376-21-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add support for the newly mainlined panel to the RG353 series of
devices.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221126011432.22891-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
gpio-keys,wakeup is a deprecated property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230304123301.33952-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add support for the NXP PN547 NFC chip found on this smartphone and
configure its pins.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230327083647.22017-18-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the STK3310 Proximity sensor and its pins.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230327083647.22017-17-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the RMI4 Touchscreen on I2C2 and its pin definitions.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230327083647.22017-14-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Properly configure and enable the three i2c controllers that have
devices attached on the Sony Xperia M5 smartphone.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230327083647.22017-13-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
In prepration for adding the IOMMUs and LARBs of this SoC, add the
VDECSYS and VENCSYS clock controller nodes, providing clocks for the
vcodec stateful decoder and stateful decoder hardware.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230327083647.22017-11-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|