| Age | Commit message (Collapse) | Author |
|---|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"
* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling.
- A rework of the handling of LDO5 on the PCA9450, this was quite
wrong in how it handled the SD_VSEL conrol and only worked for some
system designs. This includes a DTS update since there was a not
quite ABI compatible change as part of the fix
- A devres change introducing devm_kmemdup_array() was pulled in so
it could be used with some regulator conversions to that function,
this pulled in some other devres and IIO stuff that was part of the
same pull request
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed
- Support for the NXP PF9453"
* tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: axp20x: AXP717: dcdc4 doesn't have delay
regulator: dt-bindings: rtq2208: Cleanup whitespace
regulator: dt-bindings: rtq2208: Mark fixed LDO VOUT property as deprecated
regulator: rtq6752: make const read-only array fault_mask static
regulator: pf9453: add PMIC PF9453 support
regulator: dt-bindings: pca9450: Add nxp,pf9453 compatible string
regulator: pcf50633-regulator: Remove
regulator: pca9450: Handle hardware with fixed SD_VSEL for LDO5
regulator: cros-ec: use devm_kmemdup_array()
regulator: devres: use devm_kmemdup_array()
regulator: Add (devm_)of_regulator_get()
devres: Introduce devm_kmemdup_array()
iio: imu: st_lsm9ds0: Replace device.h with what is needed
driver core: Split devres APIs to device/devres.h
err.h: move IOMEM_ERR_PTR() to err.h
regulator: pca9450: Remove duplicate code in probe
regulator: ad5398: Fix incorrect power down bit mask
regulator: pca9450: Fix enable register for LDO5
regulator: pca9450: Fix control register for LDO5
Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable
PCI/MSI controllers are prone to lose interrupts when the MSI message
is updated to change the affinity because the message write consists
of three 32-bit subsequent writes, which update address and data. As
these writes are non-atomic versus the device raising an interrupt,
the device can observe a half written update and issue an interrupt
on the wrong vector. This is mitiated by a carefully orchestrated
step by step update and the observation of an eventually pending
interrupt on the CPU which issues the update. The algorithm follows
the well established method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure
paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes
* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
irqchip/imx-irqsteer: Support up to 960 input interrupts
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
irqchip/davinci-cp-intc: Remove public header
irqchip/renesas-rzv2h: Add RZ/G3E support
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
riscv: sophgo: dts: Add msi controller for SG2042
irqchip: Add the Sophgo SG2042 MSI interrupt controller
dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.15 (v2):
- switch to the new PWM controller binding
- Add gpio_intc node for Amlogic A4 & A5 SoCs
* tag 'amlogic-arm64-dt-for-v6.15-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: amlogic: g12: switch to the new PWM controller binding
arm64: dts: amlogic: axg: switch to the new PWM controller binding
arm64: dts: amlogic: gx: switch to the new PWM controller binding
Link: https://lore.kernel.org/r/f6fb1b2b-955d-4271-b772-0a75fdba1e48@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add GPIO interrupt controller device.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250311-irqchip-gpio-a4-a5-v5-4-ca4cc276c18c@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add GPIO interrupt controller device.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250311-irqchip-gpio-a4-a5-v5-3-ca4cc276c18c@amlogic.com
[narmstrong: fix commit to apply without pinctrl node]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
https://github.com/hisilicon/linux-hisi into soc/dt
ARM64: DT: HiSilicon ARM64 DT updates for v6.15
- Add property to the ETM nodes for fixing CPU idle states
* tag 'hisi-arm64-dt-for-6.15' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hi3660: Add property for fixing CPUIdle
Link: https://lore.kernel.org/r/67D968A9.7080504@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.15 (part 1)
device tree clean-up fomr DT maintainers
* tag 'mvebu-dt64-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
ARM: dts: marvell: armada: Align GPIO hog name with bindings
ARM: dts: marvell: kirkwood-openrd: Align GPIO hog name with bindings
arm64: dts: marvell: armada-8040: Align GPIO hog name with bindings
arm64: dts: marvell: Add missing board compatible for IEI-Puzzle-M801
arm64: dts: marvell: Fix missing/incorrect "marvell,armada3710" compatible
arm64: dts: marvell: Drop incomplete root compatible/model properties
dt-bindings: marvell: armada-7k-8k: Add missing 7040 and 8040 board compatibles
dt-bindings: marvell: armada-7k-8k: Move Armada 8KPlus to schema
dt-bindings: marvell: armada-37xx: Add glinet,gl-mv1000 compatible
Link: https://lore.kernel.org/r/87wmco99xv.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New peripheral the sdhci controller on rk3528. Enablement of hdmi and hdmi
audio on a number of additional boards. Better handling for scmi shared
memory on rk3568 and a fix for the used SCMI clock ids on rk3576.
As well as some fixes that were a bit late for trying to stuff them into
6.14 at this late stage of the cycle.
* tag 'v6.15-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
arm64: dts: rockchip: Add AP6275P wireless support to ArmSoM Sige7
arm64: dts: rockchip: Enable HDMI audio outputs for Orange Pi 5 Plus
arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Plus
arm64: dts: rockchip: Enable HDMI audio outputs for Orange Pi 5 Max
arm64: dts: rockchip: Enable HDMI0 audio output for Orange Pi 5/5B
Link: https://lore.kernel.org/r/23866869.6Emhk5qWAg@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
arm64: ZynqMP DT changes for 6.15
- Align clock nodes with DT binding
- Add the first VN-X Versal NET board
- Move constants out of DT bindings
* tag 'zynqmp-dt-for-6.14' of https://github.com/Xilinx/linux-xlnx:
dt-bindings: xilinx: Deprecate header with firmware constants
arm64: zynqmp: Use DT header for firmware constants
arm64: versal-net: Add description for b2197-00 revA board
dt-bindings: soc: Add new VN-X board description based on Versal NET
arm64: zynqmp: add clock-output-names property in clock nodes
Link: https://lore.kernel.org/r/CAHTX3d+u1VmxP4vm0peQS-ST7o0BuCpKUPRVCSLMfAAb=eV3Xg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.15
- New board support: NetCube Systems Kumquat
- Enable USB and LED on Anbernic RG35XX
- Fix reboot GPIO detection logic on Anbernic RG35XX
- Disable (non-existent) battery thermistor on Anbernic RG35XX
- Add CPU OPP table for A100
* tag 'sunxi-dt-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a100: Add CPU Operating Performance Points table
arm64: dts: allwinner: rg35xx: Add no-thermistor property for battery
arm64: dts: allwinner: h700: Add USB Host for RG35XX-H
arm64: dts: allwinner: h700: Add LED1 for Anbernic RG35XX
arm64: dts: allwinner: h700: Set cpusldo to always-on for RG35XX
ARM: dts: sunxi: add support for NetCube Systems Kumquat
ARM: dts: sunxi: add uart1_pe pinctrl for sun8i-v3s
dt-bindings: arm: sunxi: Add NetCube Systems Kumquat board
dt-bindings: vendor-prefixes: Add NetCube Systems Austria name
Link: https://lore.kernel.org/r/Z9LTOHJDY2p0lNG0@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.15, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add thermal support.
- Add Priva E-Measuringbox board support based on sTM32MP133C SoC.
It embeds Ethernet RMII with TI phy, SDCard, eMMC and some
sensors.
- Add support for DHCOR SoM and DHSBC rev.200 board:
TPM interrupts and gpio reset + LDO2/LDO5 support.
- STMP32MP15:
- Add new Octavo support: LXA FairyTux 2 based on OSD32MP153C SiP.
It contains eMMC for storage, a gigabit Ethernet, a CAN bus and
a RS485 transceiver.
- Add Plymovent AQM board based on STM32MP151 SoC. It embeds:
ETH RMII, WLAN, BT, Sensors (CO2, PM, pressure), Audio (I2S),
Storage (SDCard, eMMC).
- STM32MP25:
- Add STM32MP257F Discovery board: It embeds a STM32MP257FAL SoC,
with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH,
wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP23 SoC and add STM32MP235F Discovery board:
It embeds a STM32MP235FAK SoC, with 4GB of LPDDR4, 2*USB typeA,
1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP21 SoC and STM32MP215F discovery board:
It embeds a STM32MP235FAN SoC, with 2GB of LPDDR4,
1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT combo,
LCD 18bit connector, CSI camera connector, ...
* tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits)
arm64: dts: st: add stm32mp215f-dk board support
dt-bindings: stm32: document stm32mp215f-dk board
arm64: dts: st: introduce stm32mp21 SoCs family
arm64: dts: st: add stm32mp235f-dk board support
dt-bindings: stm32: document stm32mp235f-dk board
arm64: dts: st: introduce stm32mp23 SoCs family
dt-bindings: stm32: add STM32MP21 and STM32MP23 compatibles for syscon
arm64: Kconfig: expand STM32 Armv8 SoC with STM32MP21/STM32MP23 SoCs family
arm64: dts: st: add stm32mp257f-dk board support
dt-bindings: stm32: document stm32mp257f-dk board
ARM: dts: stm32: Add Plymovent AQM devicetree
ARM: dts: stm32: Add pinmux groups for Plymovent AQM board
dt-bindings: arm: stm32: Add Plymovent AQM board
dt-bindings: sound: convert ICS-43432 binding to YAML
ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board
ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2
ARM: dts: stm32: add usr3 LED node to stm32f769-disco
ARM: dts: stm32: rename LEDs nodes for stm32f769-disco
ARM: dts: stm32: add push button to stm32f746 Discovery board
ARM: dts: stm32: add led to stm32f746 Discovery board
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
During CPU low power modes, ETM components will lose their context. Add
the "arm,coresight-loses-context-with-cpu" property to ETM nodes to save
and restore ETM context for CPU idle states.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
The GPIO3 A4 pin on the ArmSoM Sige5 is routed to the 40-pin GPIO
header. This pin can serve a variety of functions, including ones of
questionable use to us on a GPIO header such as the 25MHz clock of the
ethernet controller.
Unfortunately, this is the precise function that it is being claimed for
by the gmac0 node in the Sige5 board dts, meaning it can't be used for
anything else despite serving no useful function in this role. Since it
goes through a RS0108 bidirectional voltage level translator with a
maximum data rate of 24Mbit/s in push-pull mode and 2Mbit/s data rate in
open-drain mode, it's doubtful as to whether the 25MHz clock signal
would even survive to the actual user-accessible pin it terminates in.
Remove it to leave the pin for users to play with. It's infinitely more
useful as a GPIO or even as a PWM.
Fixes: 40f742b07ab2 ("arm64: dts: rockchip: Add rk3576-armsom-sige5 board")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250314-rk3576-sige5-eth-clk-begone-v1-1-2858338fc555@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The "simple-bus" binding has preferred node names such as "bus",
".*-bus", or "soc". Rename the Marvell platforms to use these names.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The CP11X_TYPE define is not used anywhere, remove it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The Arm arch timer and PMU are not memory-mapped peripherals, and
therefore should not be under a "simple-bus" node. Move them to the
top-level like other platforms.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.15
Generic Fixups/Cleanups:
SoC Specific features and Fixes:
AM62Ax:
Enable MCU domain pinctrl node
J784S4/J742S4:
GICD reg size fixes
Serdes lane ctrl reg mux mask fix
AM62P/J722s:
Wakeup UART0 sysc updates for system wakeup
pinctrl node fixes drop pinctrl-single,gpio-ranges
BCDMA CSI-RX support
Audio REFCLKx output support
Board Specific:
J784S4:
EVM: Cleanup duplicate gpio-hogs
J722S:
TypeC port mux selection fix
AM62Ax
SK: boot-phase tag to support USB bootmode
RTC support
Aliases for wakeup and MCU serial UARTs
AM62P
SK: boot-phase tag to support USB bootmode
USB wakeup support
Aliases for wakeup and MCU serial UARTs
AM62:
verdin-dahila: microphone support
SK: Aliases for wakeup and MCU serial UARTs
BeaglePlay: reserved CMA region for Multimedia applications
J721e:
SK/EVM: boot-phase tags for Serdes for DFU boot
Phytech board updates:
Boot-phase tag updates for AM64/AM62/AM62A boards
DTS coding style cleanups
RTOS IPC reserved-memory additions
DT overlay for X27 Connectors on AM64 SOMs
J721S2 SOM:
Add flash partitions
* tag 'ti-k3-dt-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (32 commits)
arm64: dts: ti: k3-am62a-phycore-som: Reorder properties per DTS coding style
arm64: dts: ti: k3-am642-phyboard-electra: Reorder properties per DTS coding style
arm64: dts: ti: k3-am642-phyboard-electra: Add boot phase tags
arm64: dts: ti: k3-am62a-phycore-som: Add boot phase tags
arm64: dts: ti: k3-am62x-phyboard-lyra: Add boot phase tags
arm64: dts: ti: k3-j722s-evm: Add camera peripherals
arm64: dts: ti: k3-j722s-main: Add CSI2RX nodes
arm64: dts: ti: k3-j722s-main: Add BCDMA CSI overrides
arm64: dts: ti: k3-j722s: fix pinctrl settings
arm64: dts: ti: k3-am62p: fix pinctrl settings
arm64: dts: ti: am64-phyboard-electra: Add DT overlay for X27 connector
arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix serdes_ln_ctrl reg-masks
arm64: dts: ti: k3-am62p: Enable AUDIO_REFCLKx
arm64: dts: ti: k3-am62-phycore-som: Reserve RTOS IPC memory
arm64: dts: ti: k3-am64-phycore-som: Reserve RTOS IPC memory
arm64: dts: ti: k3-am62p5-sk: Add serial alias
arm64: dts: ti: k3-am62a7-sk: Add serial alias
arm64: dts: ti: k3-am62x-sk-common: Add serial aliases
arm64: dts: ti: k3-am62p5-sk: Support SoC wakeup using USB1 wakeup
arm64: dts: ti: k3-am625-beagleplay: Reserve 128MiB of global CMA
...
Link: https://lore.kernel.org/r/5d612c0e-4cd4-469a-9856-dd4552d74412@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.15:
- New board support: S32G-EVB/RDB, i.MX95 15x15 EVK, i.MX8MP Skov
revC BD500 and new 7" panel board, i.MX8MM phyboard polis PEB-AV-10
- A series from Ahmad Fatoum and Oleksij Rempel to flesh out
imx8mp-skov device trees, correcting PMIC board limits, adding display
pipeline, configuring uart1 for RS485, etc.
- A bunch of changes from Alexander Stein, adding PCIe support for
mba8xx, enabling jpeg encode and decode for tqma8xx, adding vcc-supply
for spi-nor, etc.
- A series from Chancel Liu to complete WM8960 power supplies for NXP
i.MX8 based boards
- A dozen of changes from Frank Li, enabling audio codec for imx8qm-mek,
adding PCIe EP for i.MX8Q, improving i.MX93 and i.MX95 support, etc.
- A number of changes from Frieder Schrempf to support reading SD_VSEL
signal for imx8m-kontron devices, fix SD card IO voltage control for
imx93-kontron
- A series from Teresa Remmet to improve imx8mm-phycore support, keeping
LDO3 on in suspend, adding overlays for devices without Ethernet PHY,
SPI NOR Flash, etc.
- A couple of changes from Xu Yang to enable usb3 support for
imx95-19x19-evk board
- Other random improvements and cleanups on various boards
* tag 'imx-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (84 commits)
arm64: dts: imx8qm-apalis: Remove compatible from SoM dtsi
arm64: dts: imx8mp: change AUDIO_AXI_CLK_ROOT freq. to 800MHz
arm64: dts: imx8mp: add AUDIO_AXI_CLK_ROOT to AUDIOMIX block
arm64: dts: imx93: add ddr edac support
arm64: dts: imx95: add ref clock for pcie nodes
arm64: dts: mba8xx: Remove invalid property disable-gpio
arm64: dts: imx8qm-ss-hsio: Wire up DMA IRQ for PCIe
arm64: dts: im8mq-librem5: move dwc3 usb port under ports
arm64: dts: mba8mx: change sound card model name
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: change sound card model name
arm64: dts: s32g: add FlexCAN[0..3] support for s32g2 and s32g3
arm64: dts: imx95: Add imx95-15x15-evk support
arm64: dts: imx95: Add i3c1 and i3c2
arm64: dts: imx95: Add #io-channel-cells = <1> for adc node
arm64: dts: imx8mp-skov: support new 7" panel board
arm64: dts: imx8mp-skov: add revC BD500 board
arm64: dts: imx8mp-skov: describe I2C bus recovery for all controllers
arm64: dts: imx8mp-skov: move I2C2 pin control group into DTSI
arm64: dts: imx8mp-skov: add basic board as fallback
arm64: dts: freescale: imx8mp-skov: operate SoC in nominal mode
...
Link: https://lore.kernel.org/r/20250312074005.663165-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
These Rockchip boards assign "active" as the pinctrl name for PWM
controllers, which has never been supported in mainline Rockchip PWM
driver. It seems the name used by downstream kernel is accidentally
brought into maineline. Let's fix them.
Fixes: 4403e1237be3 ("arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc")
Fixes: 964ed0807b5f ("arm64: dts: rockchip: add rk3318 A95X Z2 board")
Fixes: e7a095908227 ("arm64: dts: rockchip: Add devicetree for NanoPC-T4")
Fixes: 3f5d336d64d6 ("arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250310140916.14384-2-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Downstream Linux, and consequently both downstream and mainline TF-A,
all use a different set of clock IDs from mainline Linux. If we want to
fiddle with these clocks through SCMI, we'll need to use the right IDs.
If we don't do this we'll end up changing unrelated clocks all over the
place.
Change the clock IDs to the newly added SCMI clock IDs for the CPU and
GPU nodes, which are currently the only ones using SCMI clocks. This
fixes the terrible GPU performance, as we weren't reclocking it
properly.
Fixes: 57b1ce903966 ("arm64: dts: rockchip: Add rk3576 SoC base DT")
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Closes: https://libera.irclog.whitequark.org/linux-rockchip/2025-03-09#1741542223-1741542875;
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250310-rk3576-scmi-clocks-v1-2-e165deb034e8@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
According to the schematic, pcie reset gpio is GPIO3_D4,
not GPIO4_D4.
Fixes: c600d252dc52 ("arm64: dts: rockchip: Add Orange Pi 5 Max board")
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250311141245.2719796-1-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.15
1. Google GS101:
- Disable GSA core pinctrl because its registers are not available for
normal world.
- Add APM (Active Power Management) mailbox and the ACPM firmware nodes.
- Add new boards: Google Pixel 6 Pro (Raven).
- Enable framebuffer and reboot-mode.
2. Exynos990:
- Add PERIS clock controller, MCT timer
3. Exynos8895:
- Define all remaining serial engine (USI) and syscon nodes, add MMC.
- Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte).
4. ExynosAutov920: Add UFS and CPU cache information.
5. Various cleanups.
This includes two topic branches with DT bindings, which might be shared
with other trees depending on needs:
1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller
header constants.
2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines
header constants rework.
* tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (25 commits)
arm64: dts: tesla: Change labels to lower-case
arm64: dts: exynos: gs101: Change labels to lower-case
arm64: dts: exynosautov920: add ufs phy for ExynosAutov920 SoC
arm64: dts: exynosautov920: add CPU cache information
arm64: dts: exynos: gs101: add ACPM protocol node
arm64: dts: exynos: gs101: add AP to APM mailbox node
arm64: dts: exynos: gs101: add SRAM node
arm64: dts: exynos: gs101: add reboot-mode support (SYSIP_DAT0)
arm64: dts: exynos: gs101: align poweroff writes with downstream
arm64: dts: exynos: gs101: drop explicit regmap from reboot nodes
arm64: dts: exynos8895: Rename PMU nodes to fixup sorting
arm64: dts: exynos8895-dreamlte: enable support for the touchscreen
arm64: dts: exynos8895-dreamlte: enable support for microSD storage
arm64: dts: exynos8895: add a node for mmc
arm64: dts: exynos8895: define all usi nodes
arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1
arm64: dts: exynos990: Rename and sort PMU nodes
arm64: dts: exynos990: Add CMU_PERIS and MCT nodes
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
dt-bindings: clock: exynos990: Add CMU_PERIS block
...
Link: https://lore.kernel.org/r/20250309185601.10616-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
Apple SoC DT updates for 6.15, final batch:
- Added touchbar screen nodes for M1/M2 platforms
- Added backlight nodes for iPhone, iPad and iPod touch
* tag 'asahi-soc-dt-6.15-v3' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t8015: Add backlight nodes
arm64: dts: apple: t8010: Add backlight nodes
arm64: dts: apple: s800-0-3: Add backlight nodes
arm64: dts: apple: t7000: Add backlight nodes
arm64: dts: apple: s5l8960x: Add backlight nodes
arm64: dts: apple: Add touchbar screen nodes
Link: https://lore.kernel.org/r/20250309113212.48137-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: MNT-Reform2 laptop (rk3588), OrangePi5-Ultra (rk3588),
Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568)
New overlays: Video-adapters for Theobroma boards and one adapter used
in hw test scenarios.
Interesting bigger changes contain clock support for rk3528; support for
the hdmi1 controller as well as hdmi-audio support on both controllers on
rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic
graphics support and can now do hdmi output.
Another big block is that we're now doing overlays way better and are
including build-testing for applied overlays to the base dtb - similar
to how other arches already do this.
Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588
(rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl)
And a huge number of board-level improvements and additions.
* tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (89 commits)
arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D
arm64: dts: rockchip: Add SFC nodes for rk3576
arm64: dts: rockchip: Add maskrom button to Radxa E20C
arm64: dts: rockchip: Add SARADC node for RK3528
arm64: dts: rockchip: Add user button to Radxa E20C
arm64: dts: rockchip: Add leds node to Radxa E20C
arm64: dts: rockchip: Add HDMI support for rock-4d
arm64: dts: rockchip: enable SCMI clk for RK3528 SoC
arm64: dts: rockchip: Enable HDMI receiver on rock-5b
arm64: dts: rockchip: Add device tree support for HDMI RX Controller
arm64: dts: rockchip: Add rk3528 QoS register node
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
arm64: dts: rockchip: add MNT Reform 2 laptop
dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE)
dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon
dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon
arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10
arm64: dts: rockchip: Enable hdmi display on sige5
arm64: dts: rockchip: Add hdmi for rk3576
arm64: dts: rockchip: Add vop for rk3576
...
Link: https://lore.kernel.org/r/13791512.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.15-rc1
This contains a patch to remove an unusable key that was erroneously
exposed as well as a fix to support GPUs with a large amount of video
memory on IGX Orin.
Finally, some additional devices, such as a temperature sensor, are
enabled on Jetson TX1, the output voltage of some pins is adjusted and
the VDD_LCD_1V8_DIS power supply now uses the correct enable GPIO.
* tag 'tegra-for-6.15-arm64-dt-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: p2180: Add TMP451 temperature sensor node
arm64: tegra: p2597: Enable TCA9539 as IRQ controllers
arm64: tegra: Define pinmuxing for gpio pads on Tegra210
arm64: tegra: p2597: Fix gpio for vdd-1v8-dis regulator
arm64: tegra: Resize aperture for the IGX PCIe C5 slot
arm64: tegra: Remove the Orin NX/Nano suspend key
Link: https://lore.kernel.org/r/20250307174938.3456275-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"spi-controller" is not a documented property nor used anywhere, so drop
it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-4-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use preferred node names for bus, mmc, and ethernet.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-3-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The fixed clocks are not part of "simple-bus", so move them out of the
bus to the top-level. In the process, use the preferred node names of
"clock-<freq>". There's also little reason to have multiple fixed
clocks at the same frequencies, so remove them keeping the labels
to minimize the change.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-2-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
AMD Overdrive B1 version is just more peripherals enabled over B0
version. Rework the B1 .dts to use the B0 .dts.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-1-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.15 (take two)
- Add GPU support for the RZ/V2H(P) SoC and the RZ/V2H EVK board.
* tag 'renesas-dts-for-v6.15-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable Mali-G31
arm64: dts: renesas: r9a09g057: Add Mali-G31 GPU node
Link: https://lore.kernel.org/r/cover.1741362039.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 Devicetree fixes for v6.14
Revert the change to marking SDM845 SMMU dma-coherent, as this is
reported not to be true.
* tag 'qcom-arm64-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu"
Link: https://lore.kernel.org/r/20250310191409.1208520-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
A number of emmc fixes (removing CQE from Theobroma boards and slower
freq on Rock-5-ITX) as well as some pinmux fixes and missing supplies.
* tag 'v6.14-rockchip-dtsfixes2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: slow down emmc freq for rock 5 itx
arm64: dts: rockchip: Add missing PCIe supplies to RockPro64 board dtsi
arm64: dts: rockchip: Add avdd HDMI supplies to RockPro64 board dtsi
arm64: dts: rockchip: Remove undocumented sdmmc property from lubancat-1
arm64: dts: rockchip: fix pinmux of UART5 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix pinmux of UART0 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S
arm64: dts: rockchip: remove supports-cqe from rk3588 tiger
arm64: dts: rockchip: remove supports-cqe from rk3588 jaguar
Link: https://lore.kernel.org/r/1990830.tdWV9SEqCh@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
HDMI audio is available on the ArmSoM Sige7 HDMI TX port.
Enable it for HDMI0 port.
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Link: https://lore.kernel.org/r/20250312164056.3998224-1-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Radxa E20C may come with an onboard eMMC (8GB / 16GB / 32GB / 64GB).
Enable support for the onboard eMMC on Radxa E20C.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250305214108.1327208-4-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The SDHCI controller in Rockchip RK3528 is similar to the one included
in RK3588.
Add device tree node for the SDHCI controller in RK3528.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250305214108.1327208-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Bluetooth node described in the device tree is actually on an M.2
slot. What module is present depends on what the end user installed,
and should be left to an overlay.
Remove the existing bluetooth node. This gets rid of bogus timeout
errors.
Fixes: 8cf890aabd45 ("arm64: dts: rockchip: Add nodes for SDIO/UART Wi-Fi/Bluetooth modules to Radxa Rock 3A")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250220165051.1889055-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
0x0 to 0xf0000000 are SDRAM memory areas where 0x10f000 is located.
So move the SHMEM memory of arm_scmi to the reserved memory node.
Fixes: a3adc0b9071d ("arm64: dts: rockchip: add core dtsi for RK3568 SoC")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250308100001.572657-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add STM32MP215F Discovery Kit board support. It embeds a STM32MP235FAN SoC,
with 2GB of LPDDR4, 1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT
combo, LCD 18bit connector, CSI camera connector, ...
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-10-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
STM32MP21 family is composed of 3 SoCs defined as following:
-STM32MP211: common part composed of 1*Cortex-A35, common peripherals
like SDMMC, UART, SPI, I2C, parallel display, 1*ETH ...
-STM32MP213: STM32MP211 + a second ETH, CAN-FD.
-STM32MP215: STM32MP213 + Display and CSI2.
A second diversity layer exists for security features/ A35 frequency:
-STM32MP21xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-8-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add STM32MP235F Discovery Kit board support. It embeds a STM32MP235FAK
SoC, with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH, wifi/BT
combo, DSI HDMI, LVDS connector ...
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-7-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
STM32MP23 family is composed of 3 SoCs defined as following:
-STM32MP231: common part composed of 1*Cortex-A35, common peripherals
like SDMMC, UART, SPI, I2C, parallel display, 1*ETH ...
-STM32MP233: STM32MP231 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD.
-STM32MP235: STM32MP233 + GPU/AI and video encode/decode, DSI and LDVS
display.
A second diversity layer exists for security features/ A35 frequency:
-STM32MP23xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-5-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add STM32MP257F Discovery board support. It embeds a STM32MP257FAL SoC,
with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH, wifi/BT combo,
DSI HDMI, LVDS connector ...
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-2-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
ArmSoM Sige7 uses the PCI-e AP6275P Wi-Fi 6 module. The pcie@0 node can
be used as Bridge1, so the wifi@0 node is used as a device under the
bridge 1 similar with Khadas Edge 2.
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Link: https://lore.kernel.org/r/20250311142825.2727171-1-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
HDMI audio is available on the Orange Pi 5 Plus HDMI TX ports.
Enable it for both ports.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250227235623.1624-5-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the second HDMI output port on the Orange Pi 5 Plus
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Reviewed-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20250227235623.1624-4-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
HDMI audio is available on the Orange Pi 5 Max HDMI TX ports.
Enable it for both ports.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250227235623.1624-3-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
HDMI audio is available on the Orange Pi 5 HDMI0 TX port.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250227235623.1624-2-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
