summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts
AgeCommit message (Collapse)Author
2020-04-03Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM devicetree updates from Arnd Bergmann: "Most of the commits are for additional hardware support and minor fixes for existing machines for all the usual platforms: qcom, amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap, and versatile. The conversion of binding files to machine-readable yaml format continues, along with fixes found during the validation. Andre Przywara takes over maintainership for the old Calxeda Highbank platform and provides a number of updates. The OMAP2+ platforms see a continued move from platform data into dts files, for many devices that relied on a mix of auxiliary data in addition to the DT description A moderate number of new SoCs and machines are added, here is a full list: - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865 (SM8250) is the current high-end phone chip, and IPQ6018 is a new WiFi-6 router chip. - Mediatek MT8516 application processor SoC for voice assistants, along with the "pumpkin" development board - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an evaluation board. - Kontron "sl28" board family based on NXP LS1028A - Eleven variations of the new i.MX6 TechNexion Pico board, combining the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7 SoM carriers - Three additional variants of the Toradex Colibri board family, all based on versions of the NXP i.MX7. - The Pinebook Pro laptop based on Rockchip RK3399 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on the ST-Ericsson u8500 platform - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on STMicroelectronics stm32mp157 - Renesas M3ULCB starter kit for R-Car M3-W+ - Hoperun HiHope development board with Renesas RZ/G2M - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13" * tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits) ARM: dts: ux500: Fix missing node renames arm64: dts: Revert "specify console via command line" MAINTAINERS: Update Calxeda Highbank maintainership arm: dts: calxeda: Group port-phys and sgpio-gpio items arm: dts: calxeda: Fix interrupt grouping arm: dts: calxeda: Provide UART clock arm: dts: calxeda: Basic DT file fixes arm64: dts: specify console via command line ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node ...
2020-04-03Merge branch 'arm/late' into arm/dtArnd Bergmann
Include originally "late" updates for OMAP and Qualcomm, now that it's not late any more. * arm/late: (122 commits) ARM: OMAP2+: Drop legacy platform data for ti81xx edma ARM: dts: Configure interconnect target module for ti816x edma ARM: dts: Configure interconnect target module for dm814x tptc3 ARM: dts: Configure interconnect target module for dm814x tptc2 ARM: dts: Configure interconnect target module for dm814x tptc1 ARM: dts: Configure interconnect target module for dm814x tptc0 ARM: dts: Configure interconnect target module for dm814x tpcc ARM: OMAP2+: Drop legacy platform data for dm814x cpsw ARM: dts: Configure interconnect target module for dm814x cpsw clk: ti: Fix dm814x clkctrl for ethernet arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware arm64: dts: sdm845: add IPA information arm64: dts: qcom: db845c: add analog audio support arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s arm64: dts: qcom: c630: Enable audio support arm64: dts: qcom: sdm845: add apr nodes arm64: dts: qcom: sdm845: add slimbus nodes arm64: dts: qcom: sc7180: Update reg names for SDHC arm64: dts: qcom: qcs404: Enable CQE support for eMMC arm64: dts: msm8916: Add fastrpc node ...
2020-03-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Fix the iwlwifi regression, from Johannes Berg. 2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin. 3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich. 4) Add TTL decrement action to openvswitch, from Matteo Croce. 5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov. 6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva. 7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi. 8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey. 9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki. 10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel. 11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko. 12) Support bcmgenet on ACPI, from Jeremy Linton. 13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly. 14) Support XDP meta-data in virtio_net, from Yuya Kusakabe. 15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner. 16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski. 17) Offload FIFO qdisc in mlxsw, from Petr Machata. 18) Support UDP sockets in sockmap, from Lorenz Bauer. 19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang. 20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski. 21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller. 22) Add support for hw offload of MACSEC, from Antoine Tenart. 23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh. 24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others. 25) More progress on adding the netlink interface to ethtool, from Michal Kubecek" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ...
2020-03-31Merge tag 'tty-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big set of TTY / Serial patches for 5.7-rc1 Lots of console fixups and reworking in here, serial core tweaks (doesn't that ever get old, why are we still creating new serial devices?), serial driver updates, line-protocol driver updates, and some vt cleanups and fixes included in here as well. All have been in linux-next with no reported issues" * tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits) serial: 8250: Optimize irq enable after console write serial: 8250: Fix rs485 delay after console write vt: vt_ioctl: fix use-after-free in vt_in_use() vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console tty: serial: make SERIAL_SPRD depend on COMMON_CLK tty: serial: fsl_lpuart: fix return value checking tty: serial: fsl_lpuart: move dma_request_chan() ARM: dts: tango4: Make /serial compatible with ns16550a ARM: dts: mmp*: Make the serial ports compatible with xscale-uart ARM: dts: mmp*: Fix serial port names ARM: dts: mmp2-brownstone: Don't redeclare phandle references ARM: dts: pxa*: Make the serial ports compatible with xscale-uart ARM: dts: pxa*: Fix serial port names ARM: dts: pxa*: Don't redeclare phandle references serial: omap: drop unused dt-bindings header serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete() serial: 8250: 8250_omap: Account for data in flight during DMA teardown ...
2020-03-30Merge tag 'media/v5.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New sensor driver: imx219 - Support for some new pixelformats - Support for Sun8i SoC - Added more codecs to meson vdec driver - Prepare for removing the legacy usbvision driver by moving it to staging. This driver has issues and use legacy core APIs. If nobody steps up to address those, it is time for its retirement. - Several cleanups and improvements on drivers, with the addition of new supported boards * tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits) media: venus: firmware: Ignore secure call error on first resume media: mtk-vpu: load vpu firmware from the new location media: i2c: video-i2c: fix build errors due to 'imply hwmon' media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ media: hantro: add initial i.MX8MQ support media: dt-bindings: Document i.MX8MQ VPU bindings media: vivid: fix incorrect PA assignment to HDMI outputs media: hantro: Add linux-rockchip mailing list to MAINTAINERS media: cedrus: h264: Fix 4K decoding on H6 media: siano: Use scnprintf() for avoiding potential buffer overflow media: rc: Use scnprintf() for avoiding potential buffer overflow media: allegro: create new struct for channel parameters media: allegro: move mail definitions to separate file media: allegro: pass buffers through firmware media: allegro: verify source and destination buffer in VCU response media: allegro: handle dependency of bitrate and bitrate_peak media: allegro: read bitrate mode directly from control media: allegro: make QP configurable media: allegro: make frame rate configurable media: allegro: skip filler data if possible ...
2020-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor comment conflict in mac80211. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27Merge tag 'arm-soc-fixes-5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM DT and driver fixes from Arnd Bergmann: "For the devicetree files, there are a total of 20 patches, almost entirely for 32-bit machines: - The Allwinner/sun9i r40 SoC dtsi file contains a number of issues, both for correctness and for style that are addressed in separate patches. This causes most of the changed lines of the DT updates this time. - More Allwinner updates fixing the identification of the security system on sun8i/A33, a recent regression of the A83t ethernet, and a few board specific issues on the TBS-A711 macine. - Several bug fixes for OMAP dts files, most notably fixing the timings for the NAND flash on the Nokia N900 that regressed a while ago after the move to configuring them from DT. Some other OMAPs now set the correct dma limits on the L3 bus, and a regression fix addresses lost Ethernet on dm814x - One incorrect setting in the newly added Raspberry Pi Zero W that may cause issues with the SD card controller. - A missing property on the bcm2835 firmware node caused incorrect DMA settings. - An old bug on the oxnas platform causing spurious interrupts is finally addressed. - A regression on the Exynos Midas board broke the OLED panel power supply. - The i.MX6 phycore SoM specified the wrong voltage for the SoC, this is now set to the values from the datasheet. - Some 64-bit machines use a deprecated string to identify the PSCI firmware. There are also several small code fixes addressing mostly serious issues: - Fix the sunxi rsb bus access to no longer return incorrect data when mixing 8 and 16 bit I/O. - Fix a suspend/resume regression on the OMAP2+ lcdc from a missing quirk in the ti-sysc driver - Fix a NULL pointer access from a race in the fsl dpio driver - Fix a v5.5 regression in the exynos-chipid driver that caused an invalid error code probing the device on non-exynos platforms - Fix an out-of-bounds access in the AMD TEE driver" * tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) soc: samsung: chipid: Fix return value on non-Exynos platforms arm64: dts: Fix leftover entry-methods for PSCI ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards ARM: dts: oxnas: Fix clear-mask property ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: bcm2835-rpi-zero-w: Add missing pinctrl name ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage soc: fsl: dpio: register dpio irq handlers after dpio create tee: amdtee: out of bounds read in find_session() ARM: dts: N900: fix onenand timings bus: ti-sysc: Fix quirk flags for lcdc on am335x ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode ...
2020-03-26arm64: dts: ti: k3-j721e-common-proc-board: add mcu cpsw nuss pinmux and phy ↵Grygorii Strashko
defs The TI J721E EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI j721e SoC MCU Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: dts: ti: k3-j721e-mcu: add mcu cpsw nuss nodeGrygorii Strashko
Add DT node for The TI J721E MCU SoC Gigabit Ethernet subsystem (MCU CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defsGrygorii Strashko
AM654 EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI am654 SoC Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: dts: ti: k3-am65-mcu: add cpsw nuss nodeGrygorii Strashko
Add DT node for the TI AM65x SoC Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26Merge tag 'qcom-arm64-for-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/late Qualcomm ARM64 DT updates for v5.7 This brings initial support for the SM8250 and IPQ6018 platforms. SDM845 gets audio, PCIe and IP-accelerator support, and the interconnect providers are refactored. The Lenovo Yoga C630 has audio enabled and the DB845c has PCIe, analog audio and low-speed interfaces enabled. The SDM845 MTP has its display enabled and firmware location updated to match linux-firmware. SC7180 gains CPU topology and power properties. Interconnect providers, eMMC, SD-card, multimedia clocks, display, Bluetooth, Venus are added. Critical trip points are added as well as various fixes. For MSM8916 FastRPC support is added, ETM power management and reserved memory for Samsung A2015 are corrected. MSM8996 switches to generic QMP phy driver for its UFS support. MSM8998 temporarily disables part of Coresight to boot without clk_ignore_unused. CEQ for eMMC on QCS404 is enabled. Fixes throughout the platforms to fix binding compliance, correct compatibles for SDHCI nodes and add gpio-ranges. * tag 'qcom-arm64-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (56 commits) arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware arm64: dts: sdm845: add IPA information arm64: dts: qcom: db845c: add analog audio support arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s arm64: dts: qcom: c630: Enable audio support arm64: dts: qcom: sdm845: add apr nodes arm64: dts: qcom: sdm845: add slimbus nodes arm64: dts: qcom: sc7180: Update reg names for SDHC arm64: dts: qcom: qcs404: Enable CQE support for eMMC arm64: dts: msm8916: Add fastrpc node arm64: dts: qcom: sm8250: Add sm8250 dts file arm64: dts: qcom: msm8998-mtp: Disable funnel 4 and 5 arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes arm64: dts: qcom: apq8016-sbc: Remove wrong regulator supply arm64: dts: qcom: sc7180: Added critical trip point Thermal-zones node arm64: dts: qcom: msm8998: Fix cpu compatible arm64: dts: qcom: sc7180: Add OSM L3 interconnect provider arm64: dts: qcom: sdm845: Add OSM L3 interconnect provider arm64: dts: sc7180: Add interconnect provider DT nodes arm64: dts: qcom: msm8996: Use generic QMP driver for UFS ... Link: https://lore.kernel.org/r/20200318043823.GA470201@yoga Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-26arm64: dts: Revert "specify console via command line"Arnd Bergmann
I accidentally merged this after requesting a different solution, reverting now. Link: https://patchwork.kernel.org/patch/11431397/ Fixes: 2cedfe1247c0 ("arm64: dts: specify console via command line") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'amlogic-dt64-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.7 (round 2) - G12[ab]: add SPI support, enable on odroid-n2 * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node arm64: dts: meson-g12: add the SPIFC nodes arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width arm64: dts: meson-g12-common: add spicc controller nodes dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs dt-bindings: clk: meson: add the gxl internal dac gate Link: https://lore.kernel.org/r/7hftdyhfq4.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'v5.6-next-dts64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt2712: - add real time clock node mt8173: - mark arch timer invalid in suspend mt8183: - add CPU idle states - add watchdog node - add dynamic power coefficient and cooling cells for all CPUs mt8516: - add basic support for the SoC - add basic support for the pumpkin board * tag 'v5.6-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: add RTC nodes for MT2712 arm64: dts: mediatek: add pumpkin board dts arm64: dts: mediatek: add dtsi for MT8516 arm64: dts: mt8183: Add #cooling-cells to CPU nodes arm64: dts: mt8183: add/update dynamic power coefficients arm64: dts: mediatek: rename scpsys nodes to power-controller amr64: dts: mt8183: Add watchdog node arm64: dts: mt8173: add arm,no-tick-in-suspend in timer arm64: dts: mt8183: Enable CPU idle-states Link: https://lore.kernel.org/r/c512b5cb-e639-1429-64db-9c1a53378c49@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'ti-k3-soc-for-v5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC family changes for v5.7 - Add missing clocks to dwc3 nodes on am65x (fixes USB) - Add DMA entries for main_spi0 on am65x - Add phy-gmii-sel nodes for both am65x and j721e (towards ethernet support) - Add DMA entries for ADC for both am65x and j721e - Add MCU system control module on j721e (needed by phy-gmii-sel) * tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes Link: https://lore.kernel.org/r/4b6b7804-4bcb-07ba-5e76-6a411e1f457f@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'socfpga_dts_update_for_v5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.7 - Increase NAND boot partition for Arria10 - Increase QSPI partition for Stratix10 and Agilex * tag 'socfpga_dts_update_for_v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: increase the QSPI reg address for Stratix10 and Agilex ARM: dts: socfpga: arria10: Increase boot partition size for NAND Link: https://lore.kernel.org/r/20200318145957.30338-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'imx-dt64-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 DTS update for 5.7: - New support for Kontron LS1028A based boards and NXP i.MX8MP EVK. - Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board. - Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board. - Add SNVS clock description to pwrkey device for i.MX8 SoCs. - A number of updates on librem5-devkit board to add audio, proximity sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD devices as well. - A series of patches from Anson Huang to update i.MX8 EVK boards for support of I2C PCA6416, thermal, GPIO LED, OPP table etc. - Add PCIe device nodes for LX2160A and LS1028A SoC. - Add FSPI deivce support for LX2160A evaluation boards. - Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board. - Other small and random updates on LS1028A and i.MX8 support. * tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits) arm64: dts: ls1028a: disable the felix switch by default arm64: dts: imx8mp: Add snvs clock to powerkey arm64: dts: imx8mn: Add snvs clock to powerkey arm64: dts: ls1028a: Add PCIe controller DT nodes arm64: dts: ls1028a: sl28: add support for variant 2 arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS arm64: dts: ls1028a: sl28: fix on-board EEPROMS arm64: dts: freescale: sl28: add SPI flash arm64: dts: imx8m: fix aips dts node arm64: dts: imx8mn: Add CPU thermal zone support arm64: dts: imx8mm: Add thermal zone support arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration arm64: dts: enable fspi in imx8mm dts arm64: dts: imx8mn: align name for crypto child nodes arm64: dts: lx2160aqds: Add FSPI node properties arm64: dts: lx2160ardb: Update FSPI node properties arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support arm64: dts: layerscape: add iommu-map property to pci nodes arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus arm64: dts: imx8mp-evk: Add i2c3 support ... Link: https://lore.kernel.org/r/20200318051918.32579-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'uniphier-dt64-v5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM64 SoC DT updates for v5.7 - Rename nodes to avoid dt-schema warnings - Enable SPI for PXs3 reference board - Enable thermal monitor for PXs3 SoC - Fix clock and reset of SPI nodes * tag 'uniphier-dt64-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: Set SCSSI clock and reset IDs for each channel arm64: dts: uniphier: Add nodes of thermal monitor and thermal zone for PXs3 arm64: dts: uniphier: Enable spi node for PXs3 reference board arm64: dts: uniphier: rename NAND node names to follow json-schema arm64: dts: uniphier: rename aidet node names to follow json-schema arm64: dts: uniphier: change SD/eMMC node names to follow json-schema Link: https://lore.kernel.org/r/CAK7LNASMD-zqNfG02WhU1LeAJevnjBv=oT2N_7y6C8w7kryotQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'amlogic-dt64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.7 - sound, bluetooth, thermal updates - A1: add secure power domain nodes - misc. cleanups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add thermal zones to meson gx devices arm64: dts: meson: khadas-vim3: move model to g12b-khadas-vim3 dtsi arm64: dts: meson-g12b: fix N2/VIM3 audio card model names arm64: dts: meson-gxbb-vega-s95: fix bluetooth node arm64: dts: meson-gxl-s905x-p212: add bluetooth nodes arm64: dts: meson-gxbb-odroid-c2: add rc-odroid ir keymap arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson: sei510: fix sound card codec node arm64: dts: meson: s400: fix sound card codec nodes arm64: dts: meson: add pdm reset line arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller arm64: dts: amlogic: add rc-videostrong-kii-pro keymap arm64: dts: meson: a1: add secure power domain controller Link: https://lore.kernel.org/r/7hlfo0ugnj.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'v5.7-rockchip-dts64-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Support for the rk3399-based Pinebook Pro, eDP support and power-tree for the rk3399 evaluation board, a big number of fixes for issues found by checking against the new yaml dt-bindings. And on the smaller side, fixes for network transfers, the mute gpio on rk3328 gets actually described and one lvds fix on the px30 and the rk3399-hugsun board gets IR and power led. * tag 'v5.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits) arm64: dts: rockchip: Add Hugsun X99 power led arm64: dts: rockchip: Add Hugsun X99 IR receiver arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodes arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator arm64: dts: add bus to rockchip amba nodenames arm64: dts: rockchip: replace clock-freq-min-max by max-frequency arm64: dts: rockchip: fix vqmmc-supply property name for rk3399 puma arm64: dts: remove no-emmc from mmc node for Rockchip PX5 EVB arm64: dts: rockchip: remove rockchip,grf from vop nodes for px30 arm64: dts: rockchip: remove max-freq from &spi1 node for Hugsun X99 arm64: dts: rockchip: fix compatible property for rk3399-evb arm64: dts: rockchip: Add initial support for Pinebook Pro dt-bindings: Add doc for Pine64 Pinebook Pro arm64: dts: rockchip: Enable eDP display on rk3399 evb arm64: dts: rockchip: remove enable-gpio of backlight on rk3399 evb arm64: dts: rockchip: Add pmic dt tree for rk3399 evb arm64: dts: rockchip: remove dvs2 pinctrl for pmic on rk3399 evb arm64: dts: rockchip: fix px30 lvds ports arm64: dts: rockchip: Add txpbl node for RK3399/RK3328 ... Link: https://lore.kernel.org/r/27799037.pT45f1LVdF@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu into arm/dtArnd Bergmann
mvebu dt64 for 5.7 (part 1) Improve network support on two Armada 8040 based board: Clearfog GT 8 and Macchiatobin. Add ethernet alias on Espressobin for U-Boot support. Fix various dt compilation issue or warning. * tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: Fix cpu compatible for AP807-quad arm64: dts: marvell: fix non-existed cpu referrence in armada-ap806-dual.dtsi arm64: dts: marvell: build ESPRESSObin variants arm64: dts: marvell: espressobin: indicate dts version arm64: dts: marvell: espressobin: add ethernet alias arm64: dts: mcbin: support 2W SFP modules arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay Link: https://lore.kernel.org/r/87h7yqx7w2.fsf@FE-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tegra-for-5.7-arm64-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.7-rc1 These changes add support for the XUSB pad controller, as well as the XUSB controller on Tegra194. Furthermore, USB device mode is supported across Tegra210 and Tegra186 boards. PCIe endpoint mode support is added for the Jetson AGX Xavier platform. Various minor fixes eliminate warnings on boot related to missing power supplies for some devices. * tag 'tegra-for-5.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Add support for PCIe endpoint mode in P2972-0000 platform arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194 arm64: tegra: Add ethernet alias on Jetson TX1 arm64: tegra: Populate LP8557 backlight regulator arm64: tegra: Fix Tegra186 SOR supply arm64: tegra: Add EEPROM supplies arm64: tegra: Enable I2C controller for EEPROM arm64: tegra: smaug: Change clk_out_2 provider to PMC arm64: tegra: Add clock-cells property to Tegra PMC node arm64: tegra: Enable XUDC node on Jetson Nano arm64: tegra: Update OTG port entries for Jetson Nano arm64: tegra: Enable XUDC node on Jetson TX2 arm64: tegra: Add XUDC node for Tegra186 arm64: tegra: Enable XUDC on Jetson TX1 arm64: tegra: Add XUDC node for Tegra210 arm64: tegra: Update OTG port entries for Jetson TX2 arm64: tegra: Update OTG port entries for Jetson TX1 arm64: tegra: Enable XUSB host in P2972-0000 board arm64: tegra: Add XUSB and pad controller on Tegra194 arm64: tegra: Fix Tegra194 PCIe compatible string Link: https://lore.kernel.org/r/20200313165848.2915133-8-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'renesas-arm64-dt-for-v5.7-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.7 (take two) - Thermal support for R-Car M3-W+, - Support for the M3ULCB board with R-Car M3-W+, - CPUIdle support for R-Car M3-N and E3, - Display support for the HiHope RZ/G2M board, - A minor fix. * tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display arm64: dts: renesas: r8a77990: Add CPUIdle support for CA53 cores arm64: dts: renesas: r8a77965: Add CPUIdle support for CA57 cores arm64: dts: renesas: r8a77961: salvator-xs: Fix memory unit-address arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+ arm64: dts: renesas: r8a77961: Add thermal nodes Link: https://lore.kernel.org/r/20200313154304.1636-3-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'sunxi-dt-for-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner Device Tree Changes for v5.7 A fairly large set of changes for v5.7, including some new devices. SoC specific changes: - SPI on H6 SoC enabled - Thermal sensor on R40 SoC enabled - Deinterlace core hardware on A64 SoC enabled - Redundant assigned-clocks properties removed - required clock rates are now enforced by drivers - LVDS panel support on A20 SoC enabled - PMU compatible fixed for H5 and H6 SoCs - Thermal trip points added for A83T and H5 SoCs - (Image) Rotation core hardware on A83T and A64 SoCs enabled Device specific changes: - Pine64 PineTab and PinePhone added - Various cleanups and improvements for Pine64 PineBook - GPIO pin bank regulator supplies added for A64-OlinXino - eMMC enabled on Orange Pi 3 - PocketBook Touch Lux 3 added - Linutronix Testbox v2 added - Ethernet enabled on Orange Pi One Plus - HDMI enabled on H6-based Orange Pi boards * tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (46 commits) arm64: dts: allwinner: a64: add node for rotation core ARM: dts: sun8i: a83t: Add device node for rotation core arm64: dts: allwinner: a64: Fix display clock register range ARM: dts: sunxi: Fix DE2 clocks register range arm64: dts: allwinner: h6: orangepi: Enable HDMI arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet arm64: dts: allwinner: h6: Move ext. oscillator to board DTs arm64: dts: allwinner: Add initial support for Pine64 PinePhone dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings arm64: dts: sun50i-a64: Add i2c2 pins ARM: dts: sunxi: h3/h5: add r_pwm node arm64: allwinner: a64: enable LCD-related hardware for Pinebook ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps ARM: dts: sun8i-h3: Add thermal trip points/cooling maps arm64: dts: allwinner: h6: Fix PMU compatible arm64: dts: allwinner: h5: Fix PMU compatible ARM: dts: sun8i-a83t-tbs-a711: Drop superfluous dr_mode arm64: dts: sun50i-h5-orange-pi-pc2: Add CPUX voltage regulator ARM: dts: sun5i: Add PocketBook Touch Lux 3 support dt-bindings: arm: sunxi: Add PocketBook Touch Lux 3 ... Link: https://lore.kernel.org/r/20200313055459.GA19820@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25arm64: dts: specify console via command lineChunyan Zhang
The SPRD serial driver need to know which serial port would be used as console in an early period during initialization, otherwise console init would fail since we added this feature[1]. So this patch add console to command line via devicetree. [1] https://lore.kernel.org/lkml/20190826072929.7696-4-zhang.lyra@gmail.com/ Link: https://lore.kernel.org/r/20200311112120.30890-1-zhang.lyra@gmail.com Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'versatile-dts-v5.7-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt Versatile DTS updates for the v5.7 series take one: - Schema validation for the top level of all ARM reference designs: Integrator, Versatile, RealView, Juno. - Clean up some node names in the trees so they pass validation fine. - Drop the old text bindings. - A top level DMA ranges patch from Rob. * tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM/arm64: dts: Rename SMB bus to just bus dt-bindings: arm: Drop the non-YAML bindings dt-bindings: arm: Add Versatile Express and Juno YAML schema dt-bindings: arm: Add RealView YAML schema dt-bindings: arm: Add Versatile YAML schema dt-bindings: arm: Add Integrator YAML schema ARM: dts: RealView: Fix the name of the SoC node ARM: dts: Versatile: Use syscon as node name for IB2 ARM: dts: integratorap: Remove top level dma-ranges Link: https://lore.kernel.org/r/CACRpkdbbniYVnsE-pAmU2qCerswserNgEFtY48XQ+_K+DUNC9Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'renesas-arm64-dt-for-v5.7-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.7 - CryptoCell support for R-Car M3-W, M3-W+, M3-N, E3, and D3, - Miscellaneous fixes and improvements. * tag 'renesas-arm64-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: rzg2: Add reset control properties for display arm64: dts: renesas: rcar-gen3: Add reset control properties for display arm64: dts: renesas: Remove use of ARCH_R8A7795 arm64: dts: renesas: rcar-gen3: Add CCREE nodes arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps" arm: dts: renesas: r8a77980: Remove r8a77970 DU compatible Link: https://lore.kernel.org/r/20200226110221.19288-5-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25arm64: dts: Fix leftover entry-methods for PSCILinus Walleij
These two device trees were either missed or added after the commit correcting the "entry-method" from "arm,psci" to just "psci" as per the binding. Link: https://lore.kernel.org/r/20200322115846.16265-1-linus.walleij@linaro.org Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-23Merge 5.6-rc7 into tty-nextGreg Kroah-Hartman
We need the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodesGrygorii Strashko
Add DT node for MCU System Control module DT node and DT node for the TI J721E SoC phy-gmii-sel PHY required for Ethernet ports mode selection. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-03-19arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel nodeGrygorii Strashko
Add DT node for the TI AM65x SoC phy-gmii-sel PHY required for Ethernet ports mode selection. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-03-19arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADCVignesh Raghavendra
Add DMA entries for ADC nodes Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-03-19arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0Vignesh Raghavendra
Add DMA entry for main_spi0, that has SPI flash connected, for better throughput and reduced CPU load. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-03-19arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADCVignesh Raghavendra
Add DMA entries for ADC nodes Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-03-19arm64: dts: ti: k3-am65: Add clocks to dwc3 nodesDave Gerlach
The TI sci-clk driver can scan the DT for all clocks provided by system firmware and does this by checking the clocks property of all nodes, so we must add this to the dwc3 nodes so USB clocks are available. Without this USB does not work with latest system firmware i.e. [ 1.714662] clk: couldn't get parent clock 0 for /interconnect@100000/dwc3@4020000 Fixes: cc54a99464ccd ("arm64: dts: ti: k3-am6: add USB suppor") Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Cc: stable@kernel.org Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-03-17arm64: dts: meson-g12b-odroid-n2: add SPIFC controller nodeNeil Armstrong
Add disabled SPIFC controller node with instruction on how to enable it while lowering capabilities of the eMMC controller from 8bits bus width to 4bits bus width, it's data pins 4 to 7 being shared with the SPI NOR controller pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200313090713.15147-5-narmstrong@baylibre.com
2020-03-17arm64: dts: khadas-vim3: add SPIFC controller nodeNeil Armstrong
Add disabled SPIFC controller node with instruction on how to enable it while lowering capabilities of the eMMC controller from 8bits bus width to 4bits bus width, it's data pins 4 to 7 being shared with the SPI NOR controller pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200313090713.15147-4-narmstrong@baylibre.com
2020-03-17arm64: dts: meson-g12: add the SPIFC nodesNeil Armstrong
Add the controller and pinctrl nodes to enable the SPI Flash Controller on the Amlogic G12A and compatible SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200313090713.15147-3-narmstrong@baylibre.com
2020-03-17arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus widthNeil Armstrong
The Khadas VIM3 shares the eMMC pins 4 to 7 with the SPI NOR, in order to enable the eMMC and the SPI NOR interface, we need to omit the 4 last pins from the eMMC pinctrl. As it was done for the Khadas VIM2, split the eMMC pinctrls in ctrl, data and ds pins with either 4bits data or 8bits data, and update the current board accordingly. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200313090713.15147-2-narmstrong@baylibre.com
2020-03-16arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmwareBjorn Andersson
Update the firmware-name of the remoteproc nodes to mimic the firmware structure on other 845 devices. Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200302020757.551483-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-16arm64: dts: sdm845: add IPA informationAlex Elder
Add IPA-related nodes and definitions to "sdm845.dtsi". Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20200313115237.10491-2-elder@linaro.org [bjorn: Moved modem-init to cheza.dtsi] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-17arm64: dts: rockchip: Add Hugsun X99 power ledVivek Unune
Remove pwm0 node as it interferes with power LED gpio. Tested with LibreElec linux-next-20200305 Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Link: https://lore.kernel.org/r/20200313230513.123049-1-npcomplete13@gmail.com [split out led addition into separate patch] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17arm64: dts: rockchip: Add Hugsun X99 IR receiverVivek Unune
Add the IR receiver and its associated pinctrl entry. Tested with LibreElec linux-next-20200305 Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Link: https://lore.kernel.org/r/20200313230513.123049-1-npcomplete13@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodesJohan Jonker
A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff5d0000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' 'clock-names' is not a valid property name for usb_host nodes with compatible string 'generic-ohci', so remove them. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ohci.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200312171441.21144-4-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodesJohan Jonker
A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff5c0000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' 'clock-names' is not a valid property name for usb_host nodes with compatible string 'generic-ehci', so remove them. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ehci.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200312171441.21144-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17arm64: dts: rockchip: remove properties from spdif node RK3399 ExcavatorJohan Jonker
An expermental test with the command below gives this error: arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dt.yaml: spdif@ff870000: 'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+' 'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns' are not valid properties for 'spdif' nodes, so remove them. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200312172240.21362-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-16arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID modeMadalin Bucur
The correct setting for the RGMII ports on LS1046ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5208a80 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii". Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: 3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-idMadalin Bucur
The correct setting for the RGMII ports on LS1043ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5208a80 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii_txid". This issue was not apparent at the time as the PHY driver took the same action for RGMII_TXID and RGMII_ID back then but it became visible (RX no longer working) after the above patch. Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: bf02f2ffe59c ("arm64: dts: add LS1043A DPAA FMan support") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16arm64: dts: meson-g12-common: add spicc controller nodesNeil Armstrong
This adds the controller and pinctrl nodes for the Amlogic G12A SPICC controllers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200313091401.15888-1-narmstrong@baylibre.com