summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)Author
2017-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
2017-07-04Merge tag 'armsoc-dt64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "Device-tree updates for arm64 platforms. For the first time I can remember, this is actually larger than the corresponding branch for 32-bit platforms overall, though that has more individual changes. A significant portion this time is due to added machine support: - Initial support for the Realtek RTD1295 SoC, along with the Zidoo X9S set-top-box - Initial support for Actions Semi S900 and the Bubblegum-96 single-board-cёmputer. - Rockchips support for the rk3399-Firefly single-board-computer gets added, this one stands out for being relatively fast, affordable and well₋supported, compared to many boards that only fall into one or two of the above categories. - Mediatek gains support for the mt6797 mobile-phone SoC platform and corresponding evaluation board. - Amlogic board support gets added for the NanoPi K2 and S905x LibreTech CC single-board computers and the R-Box Pro set-top-box - Allwinner board support gets added for the OrangePi Win, Orangepi Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers and the SoPine system-on-module. - Renesas board support for Salvator-XS and H3ULCB automotive development systems. - Socionext Uniphier board support for LD11-global and LD20-global, whatever those may be. - Broadcom adds support for the new Stingray communication processor in its iProc family, along with two reference boards. Other updates include: - For the hisicon platform, support for Hi3660-Hikey960 gets extended significantly. - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier, Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits) ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k" arm64: dts: mediatek: don't include missing file ARM64: dts: meson-gxl: Add Libre Technology CC support dt-bindings: arm: amlogic: Add Libre Technology CC board dt-bindings: add Libre Technology vendor prefix arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K arm64: dts: zte: Use - instead of @ for DT OPP entries arm64: dts: marvell: add gpio support for Armada 7K/8K arm64: dts: marvell: add pinctrl support for Armada 7K/8K arm64: dts: marvell: use new binding for the system controller on cp110 arm64: dts: marvell: remove *-clock-output-names on cp110 arm64: dts: marvell: use new bindings for xor clocks on ap806 arm64: dts: marvell: mcbin: enable the mdio node arm64: dts: Add Actions Semi S900 and Bubblegum-96 dt-bindings: Add vendor prefix for uCRobotics arm64: dts: marvell: add xmdio nodes for 7k/8k arm64: dts: marvell: add a comment on the cp110 slave node status arm64: dts: marvell: remove cpm crypto nodes from dts files arm64: dts: marvell: cp110: enable the crypto engine at the SoC level ...
2017-07-03Merge tag 'char-misc-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits) misc: apds990x: Use sysfs_match_string() helper mei: drop unreachable code in mei_start mei: validate the message header only in first fragment. DocBook: w1: Update W1 file locations and names in DocBook mux: adg792a: always require I2C support nvmem: rockchip-efuse: add support for rk322x-efuse nvmem: core: add locking to nvmem_find_cell nvmem: core: Call put_device() in nvmem_unregister() nvmem: core: fix leaks on registration errors nvmem: correct Broadcom OTP controller driver writes w1: Add subsystem kernel public interface drivers/fsi: Add module license to core driver drivers/fsi: Use asynchronous slave mode drivers/fsi: Add hub master support drivers/fsi: Add SCOM FSI client device driver drivers/fsi/gpio: Add tracepoints for GPIO master drivers/fsi: Add GPIO based FSI master drivers/fsi: Document FSI master sysfs files in ABI drivers/fsi: Add error handling for slave drivers/fsi: Add tracepoints for low-level operations ...
2017-07-03Merge tag 'mvebu-dt64-4.13-3' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/dt64 Pull "late dt64 for 4.13" from Gregory CLEMENT: It is actually a patch that missed the end of the 4.12 merge window. The patch itself fix a bogus definition of the timer for the Armada 37xx SoCs. * tag 'mvebu-dt64-4.13-3' of git://git.infradead.org/linux-mvebu: ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
2017-07-03ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiersMarc Zyngier
Contrary to popular belief, PPIs connected to a GICv3 to not have an affinity field similar to that of GICv2. That is consistent with the fact that GICv3 is designed to accomodate thousands of CPUs, and fitting them as a bitmap in a byte is... difficult. Fixes: adbc3695d9e4 ("arm64: dts: add the Marvell Armada 3700 family and a development board") Cc: <stable@vger.kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-07-01arm: sunxi: Revert changes merged through net-next.Maxime Ripard
This reverts commits 2c0cba482e79 ("arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module") to 2428fd0fe550 ("arm64: defconfig: Enable dwmac-sun8i driver on defconfig") and 3432a86e641c ("arm: sun8i: orangepipc: use internal phy-mode") to 5a79b4f2a5e7 ("arm: sun8i: orangepi-2: use internal phy-mode") that should be merged through the arm-soc tree, and end up in merge conflicts and build failures. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29Merge tag 'actions-arm64-dt-for-4.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt64 Pull "Actions Semi ARM64 based SoC DT for 4.13" from Andreas Färber: This adds an initial DT for the S900 SoC and a devboard based on it. * tag 'actions-arm64-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: arm64: dts: Add Actions Semi S900 and Bubblegum-96 dt-bindings: Add vendor prefix for uCRobotics
2017-06-29Merge tag 'amlogic-dt64-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64 Pull "Amlogic 64-bit DT changes for v4.13 (round 2)" from Kevin Hilman: - support new SPI controller driver - several more leaf clocks exposed to DT - New board: S905x LibreTech CC board * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxl: Add Libre Technology CC support dt-bindings: arm: amlogic: Add Libre Technology CC board dt-bindings: add Libre Technology vendor prefix ARM64: dts: meson-gx: Add SPICC nodes clk: meson-gxbb: un-export the CPU clock clk: meson-gxbb: expose UART clocks clk: meson-gxbb: expose SPICC gate clk: meson-gxbb: expose spdif master clock clk: meson-gxbb: expose i2s master clock clk: meson-gxbb: expose spdif clock gates
2017-06-23Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"Arnd Bergmann
As I found by chance while merging another patch, the usage of a dma-mask in this DT node is wrong for multiple reasons: - dma-masks are a Linux specific concept, not a general hardware feature - In DT, we use the "dma-ranges" property to describe how DMA addresses related between devices. - The 40-bit mask appears to be completely unnecessary here, as the SoC cannot address that much memory anyway, so simply asking for a 64-bit mask (as supported by the device) should succeed anyway. The patch to remove the parsing of the property is getting merged through the crypto tree. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-23Merge tag 'mvebu-fixes-4.12-1' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/dt64 mvebu fixes for 4.12 Fix the interrupt description of the crypto node for device tree of the Armada 7K/8K SoCs * tag 'mvebu-fixes-4.12-1' of git://git.infradead.org/linux-mvebu: arm64: marvell: dts: fix interrupts in 7k/8k crypto nodes
2017-06-23Merge tag 'mvebu-dt64-4.13-2' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/dt64 Pull "mvebu dt64 for 4.13 (part 2)" from Gregory CLEMENT: - use new clock binding for Armada 7K/8K - add pinctrl on Armada 7K/8K - add GPIO on Armada 7K/8K - switch from GIC to ICU on CP110 (Armada 7K/8K) - enable the mdio node on the mcbin (Armada 8K based board) * tag 'mvebu-dt64-4.13-2' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K arm64: dts: marvell: add gpio support for Armada 7K/8K arm64: dts: marvell: add pinctrl support for Armada 7K/8K arm64: dts: marvell: use new binding for the system controller on cp110 arm64: dts: marvell: remove *-clock-output-names on cp110 arm64: dts: marvell: use new bindings for xor clocks on ap806 arm64: dts: marvell: mcbin: enable the mdio node
2017-06-23Merge tag 'zte-dt64-4.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64 Pull "ZTE arm64 device tree updates for 4.13" from Shawn Guo: - Fix DTC unit_address_vs_reg warnings in OPP entries by replacing '@' with '-' as the OPP nodes will never have a "reg" property. * tag 'zte-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: zte: Use - instead of @ for DT OPP entries
2017-06-23arm64: dts: mediatek: don't include missing fileArnd Bergmann
This resolves a build error in the next/dt branch: In file included from arch/arm64/boot/dts/mediatek/mt6797-evb.dts:16:0: arch/arm64/boot/dts/mediatek/mt6797.dtsi:15:10: fatal error: dt-bindings/power/mt6797-power.h: No such file or directory 003f5d0c3462 ("arm64: dts: mediatek: add clk and scp nodes for MT6797") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22ARM64: dts: meson-gxl: Add Libre Technology CC supportJerome Brunet
Add support for the CC board from Shenzhen Libre Technology More information about the board are available here: https://libre.computer/blog/ Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two entries being added at the same time to the IFLA policy table, whilst parallel bug fixes to decnet routing dst handling overlapping with the dst gc removal in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21arm64: dts: marvell: enable GICP and ICU on Armada 7K/8KThomas Petazzoni
This commit modifies the Marvell EBU Armada 7K and 8K Device Tree files to describe the ICU and GICP units, and use ICU interrupts for all devices in the CP110 blocks. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-21arm64: dts: zte: Use - instead of @ for DT OPP entriesViresh Kumar
Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-20arm64: dts: marvell: add gpio support for Armada 7K/8KGregory CLEMENT
Enable gpio support for CP and AP on the Marvell Armada 7K/8K SoCs. The Armada 8K has two CP110 blocks, each having two GPIO controllers. However, in each CP110 block, one of the GPIO controller cannot be used: in the master CP110, only the second GPIO controller can be used, while on the slave CP110, only the first GPIO controller can be used. On the other side, the Armada 7K has only one CP110, but both its GPIO controllers can be used. For this reason, the GPIO controllers are marked as "disabled" in the armada-cp110-master.dtsi and armada-cp110-slave.dtsi files, and only enabled in the per-SoC dtsi files. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-20arm64: dts: marvell: add pinctrl support for Armada 7K/8KGregory CLEMENT
Enable pinctrl support for CP and AP on the Armada 7K/8K SoCs. The CP master being different between Armada 7k and Armada 8k. This commit introduces the intermediates files armada-70x0.dtsi and armada-80x0.dtsi. These new files will provide different compatible strings depending of the SoC family. They will also be the location for the pinmux configuration at the SoC level. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-20arm64: dts: marvell: use new binding for the system controller on cp110Gregory CLEMENT
The new binding for the system controller on cp110 moved the clock controller into a subnode. This preliminary step will allow to add gpio and pinctrl subnodes. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-20arm64: dts: marvell: remove *-clock-output-names on cp110Gregory CLEMENT
The *-clock-output-names of the cp110-system-controller0 node are not used anymore, so remove them. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-20arm64: dts: marvell: use new bindings for xor clocks on ap806Antoine Tenart
New bindings are used for the system controller on the ap806, which means all clock properties must be converted. Use the new bindings in the xor nodes. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-20arm64: dts: marvell: mcbin: enable the mdio nodeAntoine Tenart
Since the mdio nodes are disabled by default now, we should explicitly enable these nodes at the board level when they are used. Enable the cpm_mdio node for the 8040-mcbin. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-19Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Stream of fixes has slowed down, only a few this week: - Some DT fixes for Allwinner platforms, and addition of a clock to the R_CCU clock controller that had been missed. - A couple of small DT fixes for am335x-sl50" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0 ARM: dts: am335x-sl50: Fix card detect pin for mmc1 arm64: allwinner: h5: Remove syslink to shared DTSI ARM: sunxi: h3/h5: fix the compatible of R_CCU
2017-06-18Merge tag 'imx-dt64-4.13' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64 The Freescale arm64 device tree updates for 4.13: - A series from NXP employee Li Yang that updates the copyright claims to comply with company policy. - A patch-set from Madalin Bucur that adds Data Path Acceleration Architecture (DPAA) QBMan and FMan. Quite a few .dtsi files are created for SoCs with different DPAA configuration to include the devices as needed. - Enable UHS-I SD and eMMC support for LS1046A and LS208xA RDB/QDS boards. - Enable TMU device for thermal management support on LS1088A. - Update SATA device node for LS1088A with correct compatible and ECC register bit. - A few small random device tree updates. * tag 'imx-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits) arm64: dts: ls1088a: update sata node dt-bindings: ahci-fsl-qoriq: add ls1088a chip name to the list arm64: dts: ls1012a: Add coreclk arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB arm64: dts: ls1043a: Add generic compatible string for I2C EEPROM arm64: dts: add LS1046A DPAA FMan nodes arm64: dts: add LS1043A DPAA FMan support arm64: dts: add DPAA FMan nodes arm64: dts: add LS1046A DPAA QBMan nodes arm64: dts: add LS1043A DPAA QBMan nodes arm64: dts: add DPAA QBMan portals arm64: dts: ls1088a: Add TMU device tree support arm64: dts: ls1088a: update the sata node arm64: dts: Add flash node for ls1088a qds and rdb arm64: dts: ls1088a: add esdhc node arm64: dts: ls1012a: add eSDHC nodes arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB mmc: dt: add compatible into eSDHC required properties ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'mvebu-dt64-4.13-1' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson
next/dt64 mvebu dt64 for 4.13 (part 1) - Improve the mcbin support (Armada 8040 based board): add sdhci and the second 1G port - Improve crypro nodes description on Aramda 7K/8K - Use new binding for ap806 clocks - Improve mdio nodes and add xmdio on Aramda 7K/8K - Add second SGCI node on Armada 37xx - Improve the description of the Armada 3720 DB board * tag 'mvebu-dt64-4.13-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: add xmdio nodes for 7k/8k arm64: dts: marvell: add a comment on the cp110 slave node status arm64: dts: marvell: remove cpm crypto nodes from dts files arm64: dts: marvell: cp110: enable the crypto engine at the SoC level arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot arm64: dts: marvell: Enable second SDHCI controller in Armada 37xx arm64: dts: marvell: armada-37xx: Use angle bracket for each register set arm64: dts: marvell: armada-37xx: Align the compatible string arm64: dts: marvell: armada-3720-db: Add information about the V2 board arm64: dts: marvell: armada-3720-db: Sort the dts node alphabetically arm64: dts: marvell: disable the mdio nodes by default arm64: dts: marvell: explicitly enable the mdio nodes for 7k/8k DB arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k arm64: dts: marvell: 8040-mcbin: Enable 1GB Ethernet arm64: dts: marvell: cp110: add required clocks for mdio interface arm64: dts: marvell: use new binding for the system controller on ap806 arm64: dts: marvell: remove clock-output-names on ap806 arm64: dts: marvell: add second 1G port on the Armada 8040 DB arm64: dts: marvell: mcbin: add sdhci arm64: dts: marvell: add clocks for Armada AP806 XOR engines Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'renesas-arm64-dt2-for-v4.13' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64 Second Round of Renesas ARM64 Based SoC DT Updates for v4.13 * Add reset control properties for audio to r9a779[56] SoCs * Add add DMA for IIC_DVFS to r9a779[56] SoCs * Add support for Salvator-XS and H3ULCB with R-Car H3 (r8a7795) ES2 * Add missing index to PWM pinctrl subnode name to Salvator-X board * Add 12288000 for sound ADG to Salvator-X and ULCB boards * tag 'renesas-arm64-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: r8a7796: Add reset control properties for audio arm64: dts: r8a7795: Add reset control properties for audio arm64: dts: renesas: Add support for Salvator-XS with R-Car H3 ES2.0 arm64: dts: renesas: Add common Salvator-XS board support arm64: dts: renesas: Extract common Salvator-X/XS board support arm64: dts: salvator-x: Add missing index to PWM pinctrl subnode name arm64: dts: r8a7795: h3ulcb: Add support for R-Car H3 ES2.0 arm64: dts: r8a7796: add DMA for IIC_DVFS arm64: dts: r8a7795: add DMA for IIC_DVFS arm64: dts: ulcb: add 12288000 for sound ADG arm64: dts: salvator-x: add 12288000 for sound ADG Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'qcom-arm64-for-4.13' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64 Qualcomm ARM64 Updates for v4.13 * Fix APQ8016 SBC WLAN LED * Add MSM8996 CPU node * Add MSM8992 SMEM and fixed regulator * Fixup MSM8916 USB support * tag 'qcom-arm64-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: apq8016-sbc: Correct WLAN LED default-trigger arm64: dts: msm8996: Add CPU clock controller node arm64: dts: smem enablement for msm8992 arm64: dts: msm8992 add fixed regulator arm64: dts: qcom: Collapse usb support into one node Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'tegra-for-4.13-arm64-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64 arm64: tegra: Device tree changes for v4.13-rc1 This adds the CCPLEX cluster on Tegra186, which is used to initiate CPU frequency and voltage transitions. Also included is a bit of cleanup for PCI related device tree content, in preparation for a future DTC release that has additional checks for the PCI bus. * tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: dts: nvidia: fix PCI bus dtc warnings arm64: tegra: Add CCPLEX_CLUSTER area in Tegra186 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'hisi-arm64-dt-for-4.13-v2' of ↵Olof Johansson
git://github.com/hisilicon/linux-hisi into next/dt64 ARM64: DT: Hisilicon SoC DT updates for 4.13 - Add and update Hi3660-Hikey960 board, Hi3660 PCIe RC, Hi6421v530 MFD and Hi3660 MMC binding - Add and refine devices support for Hi3660-Hikey 960 including clock, reset, I2C, GPIO, UART, Bluetooth, RTC, Power Key, LED, SPI, timer, PMIC, regulator, sd/sdio and WiFi - Add k3-dma and i2s/hdmi audio support based on audio-card-graph method for Hikey board * tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi: (21 commits) arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support arm64: dts: hi3660-hikey960: add nodes for WiFi arm64: dts: hi3660: add sd/sdio device nodes dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc arm64: dts: hikey960: add device node for pmic and regulators dt-bindings: mfd: hi6421: Add hi6421v530 compatible string arm64: dts: hisi: add kirin pcie node dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs arm64: dts: hi3660: add sp804 timer node arm64: dts: hi3660: add spi device nodes arm64: dts: hikey960: add LED nodes arm64: dts: hi3660: add power key dts node arm64: dts: hi3660: Add pl031 rtc node arm64: dts: hikey960: add WL1837 Bluetooth device node arm64: dts: hi3660: Add uarts nodes arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC arm64: dts: Add I2C nodes for Hi3660 arm64: dts: hi3660: add resources for clock and reset arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig arm64: dts: hisilicon: update compatible string for hikey960 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'juno-updates-4.13' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64 ARMv8 Vexpress/Juno DT updates for v4.13 1. Adds support for Coresight CPU debug MMIO interface on all Juno variants. 2. Enables support for few SMMUs on Juno which were previously disabled waiting for IOMMU-backed DMA API support to be stabilised. * tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: enable some SMMUs arm64: dts: juno: add coresight CPU debug nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'sunxi-dt-h5-for-4.13' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner H5 DT changes for 4.13 Just like the H3, this is mostly about enabling the EMAC on the H5, and also has a new board, the Orange Pi Zero Plus 2 * tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2 arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime arm64: allwinner: h5: sort the device nodes in / part for some boards arm64: allwinner: h5: add support for NanoPi NEO2 board arm64: allwinner: h5: add support for Orange Pi Prime board arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'sunxi-fixes-for-4.12' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 4.12 A few fixes around the PRCM support that got in 4.12 with a wrong compatible, and a missing clock in the binding. * tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU arm64: allwinner: h5: Remove syslink to shared DTSI ARM: sunxi: h3/h5: fix the compatible of R_CCU Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'sunxi-dt64-for-4.13' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner arm64 DT changes for 4.13 Our usual arm64 changes. The most notable things are the EMAC support and USB support enhancements. There's also support for the SoPine SoM, and the OrangePi Win. * tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support arm64: allwinner: a64: add device tree for SoPine with baseboard arm64: allwinner: bananapi-m64: Enable dwmac-sun8i arm64: allwinner: pine64-plus: Enable dwmac-sun8i arm64: allwinner: pine64: Enable dwmac-sun8i arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver arm64: allwinner: sun50i-a64: Add dt node for the syscon control module arm64: allwinner: a64: add DTSI file for SoPine SoM arm64: allwinner: a64: Convert CCU raw number references to macros arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl arm64: allwinner: a64: enable RSB on A64 arm64: dts: allwinner: pine64: Add remaining UART aliases arm64: dts: allwinner: a64: Add UART2 pin nodes arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64 arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'amlogic-dt64' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64 Amlogic 64-bit DT changes for v4.13 - cleanup/reorganize alphabetically to better avoid conflicts - add HDMI and CVBS nodes for multiple boards - new pinctrl pins: SPI, HDMI CEC - SCPI: fix thermal sensor reporting New board support - NanoPi K2 (GXBB) - R-Box Pro (GXM) * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (36 commits) ARM64: dts: meson-gxl-s905x-p212: Add HDMI and CVBS nodes ARM64: dts: meson-gxl-s905x-khadas-vim: Add HDMI nodes ARM64: dts: meson-gxl-s905d-p230: Add HDMI nodes ARM64: dts: meson-gxbb-wetek-play2: Add HDMI and CVBS Nodes ARM64: dts: meson-gx: Fix sensors reporting from SCP ARM64: dts: meson-gxl: Add SPI pinctrl nodes ARM64: dts: meson-gxbb: Add SPI pinctrl nodes ARM64: dts: meson-gxl: Add Ethernet PHY LEDS pins nodes ARM64: dts: meson-gxl: Add CEC pins nodes ARM64: dts: meson-gxbb: Add CEC pins nodes ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base ARM64: dts: Fix GXL periphs pinctrl pull-enable register base ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges arm64: dts: amlogic: Add NanoPi K2 dt-bindings: arm: amlogic: Add NanoPi K2 arm64: dts: meson-gxm: Add R-Box Pro dt-bindings: arm: amlogic: Add R-Box Pro dt-bindings: Add Kingnovel vendor prefix arm64: dts: meson-gx-p23x-q20x: Fix node order arm64: dts: meson-gxm-nexbox-a1: Fix node order ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'arm-soc/for-4.13/devicetree-arm64' of ↵Olof Johansson
http://github.com/Broadcom/stblinux into next/dt64 This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 4.13. Please note the following from Eric: I've based this summary on the bcm2835-dt-next tag, to clarify what's in this patch series, but it does require being careful since it involves a cross-merge between branches. - Anup documents the Broadcom Stingray binding, common clocks, adds initial support for the Stingray DTSI and DTS files and adds support for the PL022, PL330 and SP805 - Sandeep adds the clock nodes to the Stingray Device Tree nodes - Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes - Oza adds I2C Device Tree nodes to the Stingray DTSes - Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC - Ravijeta adds support for the USB Dual Role PHY on Northstar 2 - Gerd starts adding references to the sdhost and sdhci controllers, and then switches the sdcard to to use the SDHOST (faster than SDHCI) - Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi thermal driver to work correctly * tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux: arm64: dts: NS2: Add USB DRD PHY device tree node ARM64: dts: bcm2837: Define CPU thermal coefficients arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray arm64: dts: Add I2C DT nodes for Stingray SoC arm64: dts: Add GPIO DT nodes for Stingray SOC arm64: dts: Add pinctrl DT nodes for Stingray SOC arm64: dts: Add NAND DT nodes for Stingray SOC arm64: dts: Add clock DT nodes for Stingray SOC arm64: dts: Initial DTS files for Broadcom Stingray SOC dt-bindings: clk: Extend binding doc for Stingray SOC dt-bindings: bcm: Add Broadcom Stingray bindings document ARM: dts: bcm283x: switch from &sdhci to &sdhost arm64: dts: bcm2837: add &sdhci and &sdhost ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6) Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'uniphier-dt64-v4.13' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64 UniPhier ARM64 SoC DT updates for v4.13 - specify timing delay properties of eMMC - fix W=1 build warnings - increase memory reserve size - use SPDX License Identifier - add new board support (LD11/LD20 global) * tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: add support for LD20 Global board arm64: dts: uniphier: add support for LD11 Global board arm64: dts: uniphier: use SPDX-License-Identifier arm64: dts: uniphier: reserve more memory for LD11/LD20 arm64: dts: uniphier: fix simple-bus unit address format error arm64: dts: uniphier: Use - instead of @ for DT OPP entries arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC arm64: dts: uniphier: add input-delay properties to Cadence eMMC node Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson
next/dt64 Add device tree nodes for mt8173: - split USB SuperSpeed port in HighSpeed and SuperSpeed ports. - move USB phy clocks up in hierarchy to met new bindings description - move MDP nodes up in hierarchy to met new bindings description mt6797: - add basic SoC support - add clock driver - add power domain dt-bindings: - clean-up i2c binding description - add binding for mt2701 i2c node - add fallback compatible to scpsys binding description - add bindings description for mt7622 and mt6796 * tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek: dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC arm64: dts: mt8173: Fix mdp device tree dt-bindings: i2c: Add Mediatek MT2701 i2c binding dt-bindings: i2c-mtk: Add mt7623 binding dt-bindings: i2c-mtk: Delete bindings dt-bindings: i2c-mt6577: Rename file to reflect bindings dt-bindings: mtk-sysirq: Correct bindings for supported SoCs arm64: dts: mediatek: add clk and scp nodes for MT6797 dt-bindings: mediatek: add MT6797 power dt-bindings arm64: dts: mediatek: add mt6797 support dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform arm64: dts: mt8173: move clock from phy node into port nodes arm64: dts: mt8173: split usb SuperSpeed port into two ports Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'samsung-dt64-4.13' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64 Samsung DeviceTree ARM64 update for v4.13: 1. Remove unneeded TE interrupt gpio property. * tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Remove the te-gpios property in the TM2 boards Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'v4.13-rockchip-dts64-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64 Support for the new rk3399 firefly board; extending the pcie ranges to make usage of pci switches possible; some more qos and pinctrl nodes on rk3399; updates for the rk3399 cpu operating points including separate opps for the higher rates OP1 variant of the chip and mmc-nodes for the rk3328. * tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: update common rk3399 operating points arm64: dts: rockchip: introduce rk3399-op1 operating points arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly arm64: dts: rockchip: add ethernet0 alias on rk3399 arm64: dts: rockchip: bring rk3399-firefly power-tree in line arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399 arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399 arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals arm64: dts: rockchip: add some missing qos nodes on rk3399 arm64: dts: rockchip: add support for firefly-rk3399 board dt-bindings: add firefly-rk3399 board support Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-19arm64: dts: Add Actions Semi S900 and Bubblegum-96Andreas Färber
Add Device Trees for Actions Semiconductor S900 SoC and uCRobotics Bubblegum-96 board. UART0/1/4/6 interrupts are guesses. Cc: 96boards@ucrobotics.com Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-06-17arm64: dts: marvell: add xmdio nodes for 7k/8kAntoine Tenart
Add the description of the xMDIO bus for the Marvell Armada 7k and Marvell Armada 8k; for both CP110 slave and master. This bus is found on Marvell Ethernet controllers and provides an interface with the xMDIO bus. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-17arm64: dts: marvell: add a comment on the cp110 slave node statusAntoine Tenart
The cryptographic engine found on the cp110 slave is disabled by default because of some known limitations. Add a comment to explain why it is disabled by default. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-17arm64: dts: marvell: remove cpm crypto nodes from dts filesAntoine Tenart
The cryptographic engine on the master cp110 is now enabled by default at the SoC level. Remove its dts nodes that were only enabling it. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-17arm64: dts: marvell: cp110: enable the crypto engine at the SoC levelAntoine Tenart
Enable the cryptographic engine at the SoC level on the master cp110. This engine is always present and do not depends on any pinmux configuration. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-17arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slotGregory CLEMENT
By adding this regulator, the SD cards are usable at higher speed protocols such as SDR104. This patch was tested with an SD HC card compatible with UHS-I. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-17arm64: dts: marvell: Enable second SDHCI controller in Armada 37xxKonstantin Porotchkin
The Armada 37xx SoCs has 2 SDHCI interfaces. This patch adds the second one. Moreover, the Armada 37xx DB v2 board populates the 2 SDHCI interfaces. The second interface is using pluggable module that can either have an SD connector or eMMC on it. This patch adds support for SD module in the device DT. [ gregory.clement@free-electrons.com: - Add more detail in commit log - Sort the dt node in address order - Document the SD slot in the dts ] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-17arm64: dts: marvell: armada-37xx: Use angle bracket for each register setGregory CLEMENT
When several groups of register address and size are used with reg, then surround each one by angle bracket. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-17arm64: dts: marvell: armada-37xx: Align the compatible stringGregory CLEMENT
This cosmetic patch aligns the compatible string when there are on several lines. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-17arm64: dts: marvell: armada-3720-db: Add information about the V2 boardGregory CLEMENT
The initial device tree file was for the board V1.4. Now the V2.0 board is also available. The same dtb will work for both, but the CON number have changed, so update the comment in the dts to reflect this. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>