| Age | Commit message (Collapse) | Author |
|---|
|
A kasan error was reported during fuzzing:
BUG: KASAN: slab-out-of-bounds in neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon]
Read of size 4 at addr ffff0010e293f010 by task syz-executor.5/1646715
CPU: 4 PID: 1646715 Comm: syz-executor.5 Kdump: loaded Not tainted 5.10.0.aarch64 #1
Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.59 01/31/2019
Call trace:
dump_backtrace+0x0/0x394
show_stack+0x34/0x4c arch/arm64/kernel/stacktrace.c:196
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x158/0x1e4 lib/dump_stack.c:118
print_address_description.constprop.0+0x68/0x204 mm/kasan/report.c:387
__kasan_report+0xe0/0x140 mm/kasan/report.c:547
kasan_report+0x44/0xe0 mm/kasan/report.c:564
check_memory_region_inline mm/kasan/generic.c:187 [inline]
__asan_load4+0x94/0xd0 mm/kasan/generic.c:252
neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon]
neon_poly1305_do_update+0x6c/0x15c [poly1305_neon]
neon_poly1305_update+0x9c/0x1c4 [poly1305_neon]
crypto_shash_update crypto/shash.c:131 [inline]
shash_finup_unaligned+0x84/0x15c crypto/shash.c:179
crypto_shash_finup+0x8c/0x140 crypto/shash.c:193
shash_digest_unaligned+0xb8/0xe4 crypto/shash.c:201
crypto_shash_digest+0xa4/0xfc crypto/shash.c:217
crypto_shash_tfm_digest+0xb4/0x150 crypto/shash.c:229
essiv_skcipher_setkey+0x164/0x200 [essiv]
crypto_skcipher_setkey+0xb0/0x160 crypto/skcipher.c:612
skcipher_setkey+0x3c/0x50 crypto/algif_skcipher.c:305
alg_setkey+0x114/0x2a0 crypto/af_alg.c:220
alg_setsockopt+0x19c/0x210 crypto/af_alg.c:253
__sys_setsockopt+0x190/0x2e0 net/socket.c:2123
__do_sys_setsockopt net/socket.c:2134 [inline]
__se_sys_setsockopt net/socket.c:2131 [inline]
__arm64_sys_setsockopt+0x78/0x94 net/socket.c:2131
__invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
invoke_syscall+0x64/0x100 arch/arm64/kernel/syscall.c:48
el0_svc_common.constprop.0+0x220/0x230 arch/arm64/kernel/syscall.c:155
do_el0_svc+0xb4/0xd4 arch/arm64/kernel/syscall.c:217
el0_svc+0x24/0x3c arch/arm64/kernel/entry-common.c:353
el0_sync_handler+0x160/0x164 arch/arm64/kernel/entry-common.c:369
el0_sync+0x160/0x180 arch/arm64/kernel/entry.S:683
This error can be reproduced by the following code compiled as ko on a
system with kasan enabled:
#include <linux/module.h>
#include <linux/crypto.h>
#include <crypto/hash.h>
#include <crypto/poly1305.h>
char test_data[] = "\x00\x01\x02\x03\x04\x05\x06\x07"
"\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f"
"\x10\x11\x12\x13\x14\x15\x16\x17"
"\x18\x19\x1a\x1b\x1c\x1d\x1e";
int init(void)
{
struct crypto_shash *tfm = NULL;
char *data = NULL, *out = NULL;
tfm = crypto_alloc_shash("poly1305", 0, 0);
data = kmalloc(POLY1305_KEY_SIZE - 1, GFP_KERNEL);
out = kmalloc(POLY1305_DIGEST_SIZE, GFP_KERNEL);
memcpy(data, test_data, POLY1305_KEY_SIZE - 1);
crypto_shash_tfm_digest(tfm, data, POLY1305_KEY_SIZE - 1, out);
kfree(data);
kfree(out);
return 0;
}
void deinit(void)
{
}
module_init(init)
module_exit(deinit)
MODULE_LICENSE("GPL");
The root cause of the bug sits in neon_poly1305_blocks. The logic
neon_poly1305_blocks() performed is that if it was called with both s[]
and r[] uninitialized, it will first try to initialize them with the
data from the first "block" that it believed to be 32 bytes in length.
First 16 bytes are used as the key and the next 16 bytes for s[]. This
would lead to the aforementioned read out-of-bound. However, after
calling poly1305_init_arch(), only 16 bytes were deducted from the input
and s[] is initialized yet again with the following 16 bytes. The second
initialization of s[] is certainly redundent which indicates that the
first initialization should be for r[] only.
This patch fixes the issue by calling poly1305_init_arm64() instead of
poly1305_init_arch(). This is also the implementation for the same
algorithm on arm platform.
Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
Cc: stable@vger.kernel.org
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Otherwise, we could fail to compile.
ld: arch/arm64/crypto/ghash-ce-glue.o: in function 'ghash_ce_mod_exit':
ghash-ce-glue.c:(.exit.text+0x24): undefined reference to 'crypto_unregister_aead'
ld: arch/arm64/crypto/ghash-ce-glue.o: in function 'ghash_ce_mod_init':
ghash-ce-glue.c:(.init.text+0x34): undefined reference to 'crypto_register_aead'
Fixes: 537c1445ab0b ("crypto: arm64/gcm - implement native driver using v8 Crypto Extensions")
Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Delete the redundant word 'the'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add hardware accelerated version of POLYVAL for ARM64 CPUs with
Crypto Extensions support.
This implementation is accelerated using PMULL instructions to perform
the finite field computations. For added efficiency, 8 blocks of the
message are processed simultaneously by precomputing the first 8
powers of the key.
Karatsuba multiplication is used instead of Schoolbook multiplication
because it was found to be slightly faster on ARM64 CPUs. Montgomery
reduction must be used instead of Barrett reduction due to the
difference in modulus between POLYVAL's field and other finite fields.
More information on POLYVAL can be found in the HCTR2 paper:
"Length-preserving encryption with HCTR2":
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Added some clarifying comments, changed the register allocations to make
the code clearer, and added register aliases.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add hardware accelerated version of XCTR for ARM64 CPUs with ARMv8
Crypto Extension support. This XCTR implementation is based on the CTR
implementation in aes-modes.S.
More information on XCTR can be found in
the HCTR2 paper: "Length-preserving encryption with HCTR2":
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory")
moved the sm4 library implementation from the lib/crypto directory to
the crypto directory and configured the name as CRYPTO_SM4. The arm64
SM4 NEON/CE implementation depends on this and needs to be modified
uniformly.
Fixes: 4f1aef9b806f ("crypto: arm64/sm4 - add ARMv8 NEON implementation")
Fixes: 5b33e0ec881c ("crypto: arm64/sm4 - add ARMv8 Crypto Extensions implementation")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This adds ARMv8 implementations of SM4 in ECB, CBC, CFB and CTR
modes using Crypto Extensions, also includes key expansion operations
because the Crypto Extensions instruction is much faster than software
implementations.
The Crypto Extensions for SM4 can only run on ARMv8 implementations
that have support for these optional extensions.
Benchmark on T-Head Yitian-710 2.75 GHz, the data comes from the 218
mode of tcrypt. The abscissas are blocks of different lengths. The
data is tabulated and the unit is Mb/s:
sm4-generic | 16 64 128 256 1024 1420 4096
ECB enc | 80.05 91.42 93.66 94.77 95.69 95.77 95.86
ECB dec | 79.98 91.41 93.64 94.76 95.66 95.77 95.85
CBC enc | 78.55 86.50 88.02 88.77 89.36 89.42 89.48
CBC dec | 76.82 89.06 91.52 92.77 93.75 93.83 93.96
CFB enc | 77.64 86.13 87.62 88.42 89.08 88.83 89.18
CFB dec | 77.57 88.34 90.36 91.45 92.34 92.00 92.44
CTR enc | 77.80 88.28 90.23 91.22 92.11 91.81 92.25
CTR dec | 77.83 88.22 90.22 91.22 92.04 91.82 92.28
sm4-neon
ECB enc | 28.31 112.77 203.03 209.89 215.49 202.11 210.59
ECB dec | 28.36 113.45 203.23 210.00 215.52 202.13 210.65
CBC enc | 79.32 87.02 88.51 89.28 89.85 89.89 89.97
CBC dec | 28.29 112.20 203.30 209.82 214.99 201.51 209.95
CFB enc | 79.59 87.16 88.54 89.30 89.83 89.62 89.92
CFB dec | 28.12 111.05 202.47 209.02 214.21 210.90 209.12
CTR enc | 28.04 108.81 200.62 206.65 211.78 208.78 206.74
CTR dec | 28.02 108.82 200.45 206.62 211.78 208.74 206.70
sm4-ce-cipher
ECB enc | 336.79 587.13 682.70 747.37 803.75 811.52 818.06
ECB dec | 339.18 584.52 679.72 743.68 798.82 803.83 811.54
CBC enc | 316.63 521.47 597.00 647.14 690.82 695.21 700.55
CBC dec | 291.80 503.79 585.66 640.82 689.86 695.16 701.72
CFB enc | 294.79 482.31 552.13 594.71 631.60 628.91 638.92
CFB dec | 293.09 466.44 526.56 563.17 594.41 592.26 601.97
CTR enc | 309.61 506.13 576.86 620.47 656.38 654.51 665.10
CTR dec | 306.69 505.57 576.84 620.18 657.09 654.52 665.32
sm4-ce
ECB enc | 366.96 1329.81 2024.29 2755.50 3790.07 3861.91 4051.40
ECB dec | 367.30 1323.93 2018.72 2747.43 3787.39 3862.55 4052.62
CBC enc | 358.09 682.68 807.24 885.35 958.29 963.60 973.73
CBC dec | 366.51 1303.63 1978.64 2667.93 3624.53 3683.41 3856.08
CFB enc | 351.51 681.26 807.81 893.10 968.54 969.17 985.83
CFB dec | 354.98 1266.61 1929.63 2634.81 3614.23 3611.59 3841.68
CTR enc | 324.23 1121.25 1689.44 2256.70 2981.90 3007.79 3060.74
CTR dec | 324.18 1120.44 1694.31 2258.32 2982.01 3010.09 3060.99
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This adds ARMv8 NEON implementations of SM4 in ECB, CBC, CFB and CTR
modes. This implementation uses the plain NEON instruction set, All
S-BOX substitutions uses the tbl/tbx instructions of ARMv8, combined
with the out-of-order execution in CPU, this optimization supports
encryption of up to 8 blocks at the same time.
The performance of encrypting one block is not as good as software
implementation, so the encryption operations of CBC and CFB still
use pure software algorithms.
Benchmark on T-Head Yitian-710 2.75 GHz, the data comes from the 218
mode of tcrypt. The abscissas are blocks of different lengths. The
data is tabulated and the unit is Mb/s:
sm4-generic | 16 64 128 256 1024 1420 4096
ECB enc | 80.05 91.42 93.66 94.77 95.69 95.77 95.86
ECB dec | 79.98 91.41 93.64 94.76 95.66 95.77 95.85
CBC enc | 78.55 86.50 88.02 88.77 89.36 89.42 89.48
CBC dec | 76.82 89.06 91.52 92.77 93.75 93.83 93.96
CFB enc | 77.64 86.13 87.62 88.42 89.08 88.83 89.18
CFB dec | 77.57 88.34 90.36 91.45 92.34 92.00 92.44
CTR enc | 77.80 88.28 90.23 91.22 92.11 91.81 92.25
CTR dec | 77.83 88.22 90.22 91.22 92.04 91.82 92.28
sm4-neon
ECB enc | 28.31 112.77 203.03 209.89 215.49 202.11 210.59
ECB dec | 28.36 113.45 203.23 210.00 215.52 202.13 210.65
CBC enc | 79.32 87.02 88.51 89.28 89.85 89.89 89.97
CBC dec | 28.29 112.20 203.30 209.82 214.99 201.51 209.95
CFB enc | 79.59 87.16 88.54 89.30 89.83 89.62 89.92
CFB dec | 28.12 111.05 202.47 209.02 214.21 210.90 209.12
CTR enc | 28.04 108.81 200.62 206.65 211.78 208.78 206.74
CTR dec | 28.02 108.82 200.45 206.62 211.78 208.74 206.70
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The subsequent patches of the series will have an implementation
of SM4-ECB/CBC/CFB/CTR accelerated by the CE instruction set, which
conflicts with the current module name. In order to keep the naming
rules of the AES algorithm consistent, the sm4-ce algorithm is
renamed to sm4-ce-cipher.
In addition, the speed of sm4-ce-cipher is better than that of SM4
NEON. By the way, the priority of the algorithm is adjusted to 300,
which is also to leave room for the priority of SM4 NEON.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The lib/crypto libraries live in lib because they are used by various
drivers of the kernel. In contrast, the various helper functions in
crypto are there because they're used exclusively by the crypto API. The
SM3 and SM4 helper functions were erroniously moved into lib/crypto/
instead of crypto/, even though there are no in-kernel users outside of
the crypto API of those functions. This commit moves them into crypto/.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For spdx, use // for *.c files
Replacements
significanty to significantly
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Even though the kernel's implementations of AES-XTS were updated to
implement ciphertext stealing and can operate on inputs of any size
larger than or equal to the AES block size, this feature is rarely used
in practice.
In fact, in the kernel, AES-XTS is only used to operate on 4096 or 512
byte blocks, which means that not only the ciphertext stealing is
effectively dead code, the logic in the bit sliced NEON implementation
to deal with fewer than 8 blocks at a time is also never used.
Since the bit-sliced NEON driver already depends on the plain NEON
version, which is slower but can operate on smaller data quantities more
straightforwardly, let's fallback to the plain NEON implementation of
XTS for any residual inputs that are not multiples of 128 bytes. This
allows us to remove a lot of complicated logic that rarely gets
exercised in practice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of processing the entire input with the 8-way bit sliced
algorithm, which is sub-optimal for inputs that are not a multiple of
128 bytes in size, invoke the plain NEON version of CTR for the
remainder of the input after processing the bulk using 128 byte strides.
This allows us to greatly simplify the asm code that implements CTR, and
get rid of all the branches and special code paths. It also gains us a
couple of percent of performance.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of falling back to C code to do a memcpy of the output of the
last block, handle this in the asm code directly if possible, which is
the case if the entire input is longer than 16 bytes.
Cc: Nathan Huckleberry <nhuck@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
SM3 generic library is stand-alone implementation, sm3-ce can depend
on the SM3 library instead of sm3-generic.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
BTI is only available from v8.5 so we need to encode it using HINT in
generic code and for older toolchains. Add an assembler macro based on
one written by Mark Rutland which lets us use the mnemonic and update
the existing users.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20211214152714.2380849-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
With the SIMD code path removed, we can clean up the CCM auth-only path
a bit further, by passing the 'macp' input buffer pointer by value,
rather than by reference, and taking the output value from the
function's return value.
This way, the compiler is no longer forced to allocate macp on the
stack. This is not expected to make any difference in practice, it just
makes for slightly cleaner code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AES-CCM (as used in WPA2 CCMP, for instance) typically involves
authenticate-only data, and operates on a single network packet, and so
the common case is for the authenticate, en/decrypt and finalize SIMD
helpers to all be called exactly once in sequence. Since
kernel_neon_end() now involves manipulation of the preemption state as
well as the softirq mask state, let's reduce the number of times we are
forced to call it to only once if we are handling this common case.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AES/CCM on arm64 is implemented as a synchronous AEAD, and so it is
guaranteed by the API that it is only invoked in task or softirq
context. Since softirqs are now only handled when the SIMD is not
being used in the task context that was interrupted to service the
softirq, we no longer need a fallback path. Let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In SIMD accelerated crypto drivers, we typically yield the SIMD unit
after processing 4 KiB of input, to avoid scheduling blackouts caused by
the fact that claiming the SIMD unit disables preemption as well as
softirq processing.
The arm64 CCM driver does this implicitly for the ciphertext, due to the
fact that the skcipher API never processes more than a single page at a
time. However, the scatterwalk performed by this driver when processing
the authenticate-only data will keep the SIMD unit occupied until it
completes.
So cap the scatterwalk steps to 4 KiB.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Calls into the skcipher API can only occur from contexts where the SIMD
unit is available, so there is no need for the SIMD helper.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Calls into the skcipher API can only occur from contexts where the SIMD
unit is available, so there is no need for the SIMD helper.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that kernel mode SIMD is guaranteed to be available when executing
in task or softirq context, we no longer need scalar fallbacks to use
when the NEON is unavailable. So get rid of them.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
SM4 library is abstracted from sm4-generic algorithm, sm4-ce can depend on
the SM4 library instead of sm4-generic, and some functions in sm4-generic
do not need to be exported.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Unify similar build rules.
sha256-core.S opts out it because it is generated from sha512-armv8.pl.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Generate *.S by Perl like arch/{mips,x86}/crypto/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- MTE asynchronous support for KASan. Previously only synchronous
(slower) mode was supported. Asynchronous is faster but does not
allow precise identification of the illegal access.
- Run kernel mode SIMD with softirqs disabled. This allows using NEON
in softirq context for crypto performance improvements. The
conditional yield support is modified to take softirqs into account
and reduce the latency.
- Preparatory patches for Apple M1: handle CPUs that only have the VHE
mode available (host kernel running at EL2), add FIQ support.
- arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers,
new functions for the HiSilicon HHA and L3C PMU, cleanups.
- Re-introduce support for execute-only user permissions but only when
the EPAN (Enhanced Privileged Access Never) architecture feature is
available.
- Disable fine-grained traps at boot and improve the documented boot
requirements.
- Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
- Add hierarchical eXecute Never permissions for all page tables.
- Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
to control which PAC keys are enabled in a particular task.
- arm64 kselftests for BTI and some improvements to the MTE tests.
- Minor improvements to the compat vdso and sigpage.
- Miscellaneous cleanups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (86 commits)
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64: pac: Optimize kernel entry/exit key installation code paths
arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)
arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
arm64/sve: Remove redundant system_supports_sve() tests
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
kasan, arm64: tests supports for HW_TAGS async mode
arm64: mte: Report async tag faults before suspend
arm64: mte: Enable async tag check fault
arm64: mte: Conditionally compile mte_enable_kernel_*()
arm64: mte: Enable TCO in functions that can read beyond buffer limits
kasan: Add report for async mode
arm64: mte: Drop arch_enable_tagging()
kasan: Add KASAN mode kernel parameter
arm64: mte: Add asynchronous mode support
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
...
|
|
The new carry handling code in the CTR driver can deal with a carry
occurring in the 4x/5x parallel code path, by using a computed goto to
jump into the carry sequence at the right place as to only apply the
carry to a subset of the blocks being processed.
If the lower half of the counter wraps and ends up at exactly 0x0, a
carry needs to be applied to the counter, but not to the counter values
taken for the 4x/5x parallel sequence. In this case, the computed goto
skips all register assignments, and branches straight to the jump
instruction that gets us back to the fast path. This produces the
correct result, but due to the fact that this branch target does not
carry the correct BTI annotation, this fails when BTI is enabled.
Let's omit the computed goto entirely in this case, and jump straight
back to the fast path after applying the carry to the main counter.
Fixes: 5318d3db465d ("crypto: arm64/aes-ctr - improve tail handling")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Kernel mode NEON can be used in task or softirq context, but only in
a non-nesting manner, i.e., softirq context is only permitted if the
interrupt was not taken at a point where the kernel was using the NEON
in task context.
This means all users of kernel mode NEON have to be aware of this
limitation, and either need to provide scalar fallbacks that may be much
slower (up to 20x for AES instructions) and potentially less safe, or
use an asynchronous interface that defers processing to a later time
when the NEON is guaranteed to be available.
Given that grabbing and releasing the NEON is cheap, we can relax this
restriction, by increasing the granularity of kernel mode NEON code, and
always disabling softirq processing while the NEON is being used in task
context.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210302090118.30666-4-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
gcc-11 points out a mismatch between the declaration and the definition
of poly1305_core_setkey():
lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=]
13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
| ~~~~~~~~~^~~~~~~~~~~
In file included from lib/crypto/poly1305-donna32.c:11:
include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
This is harmless in principle, as the calling conventions are the same,
but the more specific prototype allows better type checking in the
caller.
Change the declaration to match the actual function definition.
The poly1305_simd_init() is a bit suspicious here, as it previously
had a 32-byte argument type, but looks like it needs to take the
16-byte POLY1305_BLOCK_SIZE array instead.
Fixes: 1c08a104360f ("crypto: poly1305 - add new 32 and 64-bit generic versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of yielding from the bowels of the asm routine if a reschedule
is needed, divide up the input into 4 KB chunks in the C glue. This
simplifies the code substantially, and avoids scheduling out the task
with the asm routine on the call stack, which is undesirable from a
CFI/instrumentation point of view.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is no need for elaborate yield handling in the bit-sliced NEON
implementation of AES, given that skciphers are naturally bounded by the
size of the chunks returned by the skcipher_walk API. So remove the
yield calls from the asm code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of calling into kernel_neon_end() and kernel_neon_begin() (and
potentially into schedule()) from the assembler code when running in
task mode and a reschedule is pending, perform only the preempt count
check in assembler, but simply return early in this case, and let the C
code deal with the consequences.
This reverts commit 6caf7adc5e458f77f550b6c6ca8effa152d61b4a.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of calling into kernel_neon_end() and kernel_neon_begin() (and
potentially into schedule()) from the assembler code when running in
task mode and a reschedule is pending, perform only the preempt count
check in assembler, but simply return early in this case, and let the C
code deal with the consequences.
This reverts commit 7edc86cb1c18b4c274672232117586ea2bef1d9a.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of calling into kernel_neon_end() and kernel_neon_begin() (and
potentially into schedule()) from the assembler code when running in
task mode and a reschedule is pending, perform only the preempt count
check in assembler, but simply return early in this case, and let the C
code deal with the consequences.
This reverts commit d82f37ab5e2426287013eba38b1212e8b71e5be3.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of calling into kernel_neon_end() and kernel_neon_begin() (and
potentially into schedule()) from the assembler code when running in
task mode and a reschedule is pending, perform only the preempt count
check in assembler, but simply return early in this case, and let the C
code deal with the consequences.
This reverts commit 7df8d164753e6e6f229b72767595072bc6a71f48.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The accelerated, instruction based implementations of SHA1, SHA2 and
SHA3 are autoloaded based on CPU capabilities, given that the code is
modest in size, and widely used, which means that resolving the algo
name, loading all compatible modules and picking the one with the
highest priority is taken to be suboptimal.
However, if these algorithms are requested before this CPU feature
based matching and autoloading occurs, these modules are not even
considered, and we end up with suboptimal performance.
So add the missing module aliases for the various SHA implementations.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Counter mode is a stream cipher chaining mode that is typically used
with inputs that are of arbitrarily length, and so a tail block which
is smaller than a full AES block is rule rather than exception.
The current ctr(aes) implementation for arm64 always makes a separate
call into the assembler routine to process this tail block, which is
suboptimal, given that it requires reloading of the AES round keys,
and prevents us from handling this tail block using the 5-way stride
that we use for better performance on deep pipelines.
So let's update the assembler routine so it can handle any input size,
and uses NEON permutation instructions and overlapping loads and stores
to handle the tail block. This results in a ~16% speedup for 1420 byte
blocks on cores with deep pipelines such as ThunderX2.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 69b6f2e817e5b ("crypto: arm64/aes-neon - limit exposed routines if
faster driver is enabled") intended to hide modes from the plain NEON
driver that are also implemented by the faster bit sliced NEON one if
both are enabled. However, the defined() CPP function does not detect
if the bit sliced NEON driver is enabled as a module. So instead, let's
use IS_ENABLED() here.
Fixes: 69b6f2e817e5b ("crypto: arm64/aes-neon - limit exposed routines if ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of copying the calculated authentication tag to memory and
calling crypto_memneq() to verify it, use vector bytewise compare and
min across vector instructions to decide whether the tag is valid. This
is more efficient, and given that the tag is only transiently held in a
NEON register, it is also safer, given that calculated tags for failed
decryptions should be withheld.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Based on lessons learnt from optimizing the 32-bit version of this driver,
we can simplify the arm64 version considerably, by reordering the final
two stores when the last block is not a multiple of 64 bytes. This removes
the need to use permutation instructions to calculate the elements that are
clobbered by the final overlapping store, given that the store of the
penultimate block now follows it, and that one carries the correct values
for those elements already.
While at it, simplify the overlapping loads as well, by calculating the
address of the final overlapping load upfront, and switching to this
address for every load that would otherwise extend past the end of the
source buffer.
There is no impact on performance, but the resulting code is substantially
smaller and easier to follow.
Cc: Eric Biggers <ebiggers@google.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
PAC pointer authentication signs the return address against the value
of the stack pointer, to prevent stack overrun exploits from corrupting
the control flow. However, this requires that the AUTIASP is issued with
SP holding the same value as it held when the PAC value was generated.
The Poly1305 NEON code got this wrong, resulting in crashes on PAC
capable hardware.
Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Without the barrier_data() inside memzero_explicit(), the compiler may
optimize away the state-clearing if it can tell that the state is not
used afterwards.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
|
|
The AES code uses a 'br x7' as part of a function called by
a macro. That branch needs a bti_j as a target. This results
in a panic as seen below. Using x16 (or x17) with an indirect
branch keeps the target bti_c.
Bad mode in Synchronous Abort handler detected on CPU1, code 0x34000003 -- BTI
CPU: 1 PID: 265 Comm: cryptomgr_test Not tainted 5.8.11-300.fc33.aarch64 #1
pstate: 20400c05 (nzCv daif +PAN -UAO BTYPE=j-)
pc : aesbs_encrypt8+0x0/0x5f0 [aes_neon_bs]
lr : aesbs_xts_encrypt+0x48/0xe0 [aes_neon_bs]
sp : ffff80001052b730
aesbs_encrypt8+0x0/0x5f0 [aes_neon_bs]
__xts_crypt+0xb0/0x2dc [aes_neon_bs]
xts_encrypt+0x28/0x3c [aes_neon_bs]
crypto_skcipher_encrypt+0x50/0x84
simd_skcipher_encrypt+0xc8/0xe0
crypto_skcipher_encrypt+0x50/0x84
test_skcipher_vec_cfg+0x224/0x5f0
test_skcipher+0xbc/0x120
alg_test_skcipher+0xa0/0x1b0
alg_test+0x3dc/0x47c
cryptomgr_test+0x38/0x60
Fixes: 0e89640b640d ("crypto: arm64 - Use modern annotations for assembly functions")
Cc: <stable@vger.kernel.org> # 5.6.x-
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Suggested-by: Dave P Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201006163326.2780619-1-jeremy.linton@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This patch changes a couple u128's to be128 which is the correct
type to use and fixes a few sparse warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds declarations for variables only used by assembly
code to silence compiler warnings:
CC [M] arch/arm64/crypto/sha1-ce-glue.o
AS [M] arch/arm64/crypto/sha1-ce-core.o
CC [M] arch/arm64/crypto/sha2-ce-glue.o
AS [M] arch/arm64/crypto/sha2-ce-core.o
CHECK ../arch/arm64/crypto/sha1-ce-glue.c
CHECK ../arch/arm64/crypto/sha2-ce-glue.c
../arch/arm64/crypto/sha1-ce-glue.c:38:11: warning: symbol 'sha1_ce_offsetof_count' was not declared. Should it be static?
../arch/arm64/crypto/sha1-ce-glue.c:39:11: warning: symbol 'sha1_ce_offsetof_finalize' was not declared. Should it be static?
../arch/arm64/crypto/sha2-ce-glue.c:38:11: warning: symbol 'sha256_ce_offsetof_count' was not declared. Should it be static?
../arch/arm64/crypto/sha2-ce-glue.c:40:11: warning: symbol 'sha256_ce_offsetof_finalize' was not declared. Should it be static?
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
