| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds stack overflow detection to arm64, usable when vmap'd stacks
are in use.
Overflow is detected in a small preamble executed for each exception entry,
which checks whether there is enough space on the current stack for the general
purpose registers to be saved. If there is not enough space, the overflow
handler is invoked on a per-cpu overflow stack. This approach preserves the
original exception information in ESR_EL1 (and where appropriate, FAR_EL1).
Task and IRQ stacks are aligned to double their size, enabling overflow to be
detected with a single bit test. For example, a 16K stack is aligned to 32K,
ensuring that bit 14 of the SP must be zero. On an overflow (or underflow),
this bit is flipped. Thus, overflow (of less than the size of the stack) can be
detected by testing whether this bit is set.
The overflow check is performed before any attempt is made to access the
stack, avoiding recursive faults (and the loss of exception information
these would entail). As logical operations cannot be performed on the SP
directly, the SP is temporarily swapped with a general purpose register
using arithmetic operations to enable the test to be performed.
This gives us a useful error message on stack overflow, as can be trigger with
the LKDTM overflow test:
[ 305.388749] lkdtm: Performing direct entry OVERFLOW
[ 305.395444] Insufficient stack space to handle exception!
[ 305.395482] ESR: 0x96000047 -- DABT (current EL)
[ 305.399890] FAR: 0xffff00000a5e7f30
[ 305.401315] Task stack: [0xffff00000a5e8000..0xffff00000a5ec000]
[ 305.403815] IRQ stack: [0xffff000008000000..0xffff000008004000]
[ 305.407035] Overflow stack: [0xffff80003efce4e0..0xffff80003efcf4e0]
[ 305.409622] CPU: 0 PID: 1219 Comm: sh Not tainted 4.13.0-rc3-00021-g9636aea #5
[ 305.412785] Hardware name: linux,dummy-virt (DT)
[ 305.415756] task: ffff80003d051c00 task.stack: ffff00000a5e8000
[ 305.419221] PC is at recursive_loop+0x10/0x48
[ 305.421637] LR is at recursive_loop+0x38/0x48
[ 305.423768] pc : [<ffff00000859f330>] lr : [<ffff00000859f358>] pstate: 40000145
[ 305.428020] sp : ffff00000a5e7f50
[ 305.430469] x29: ffff00000a5e8350 x28: ffff80003d051c00
[ 305.433191] x27: ffff000008981000 x26: ffff000008f80400
[ 305.439012] x25: ffff00000a5ebeb8 x24: ffff00000a5ebeb8
[ 305.440369] x23: ffff000008f80138 x22: 0000000000000009
[ 305.442241] x21: ffff80003ce65000 x20: ffff000008f80188
[ 305.444552] x19: 0000000000000013 x18: 0000000000000006
[ 305.446032] x17: 0000ffffa2601280 x16: ffff0000081fe0b8
[ 305.448252] x15: ffff000008ff546d x14: 000000000047a4c8
[ 305.450246] x13: ffff000008ff7872 x12: 0000000005f5e0ff
[ 305.452953] x11: ffff000008ed2548 x10: 000000000005ee8d
[ 305.454824] x9 : ffff000008545380 x8 : ffff00000a5e8770
[ 305.457105] x7 : 1313131313131313 x6 : 00000000000000e1
[ 305.459285] x5 : 0000000000000000 x4 : 0000000000000000
[ 305.461781] x3 : 0000000000000000 x2 : 0000000000000400
[ 305.465119] x1 : 0000000000000013 x0 : 0000000000000012
[ 305.467724] Kernel panic - not syncing: kernel stack overflow
[ 305.470561] CPU: 0 PID: 1219 Comm: sh Not tainted 4.13.0-rc3-00021-g9636aea #5
[ 305.473325] Hardware name: linux,dummy-virt (DT)
[ 305.475070] Call trace:
[ 305.476116] [<ffff000008088ad8>] dump_backtrace+0x0/0x378
[ 305.478991] [<ffff000008088e64>] show_stack+0x14/0x20
[ 305.481237] [<ffff00000895a178>] dump_stack+0x98/0xb8
[ 305.483294] [<ffff0000080c3288>] panic+0x118/0x280
[ 305.485673] [<ffff0000080c2e9c>] nmi_panic+0x6c/0x70
[ 305.486216] [<ffff000008089710>] handle_bad_stack+0x118/0x128
[ 305.486612] Exception stack(0xffff80003efcf3a0 to 0xffff80003efcf4e0)
[ 305.487334] f3a0: 0000000000000012 0000000000000013 0000000000000400 0000000000000000
[ 305.488025] f3c0: 0000000000000000 0000000000000000 00000000000000e1 1313131313131313
[ 305.488908] f3e0: ffff00000a5e8770 ffff000008545380 000000000005ee8d ffff000008ed2548
[ 305.489403] f400: 0000000005f5e0ff ffff000008ff7872 000000000047a4c8 ffff000008ff546d
[ 305.489759] f420: ffff0000081fe0b8 0000ffffa2601280 0000000000000006 0000000000000013
[ 305.490256] f440: ffff000008f80188 ffff80003ce65000 0000000000000009 ffff000008f80138
[ 305.490683] f460: ffff00000a5ebeb8 ffff00000a5ebeb8 ffff000008f80400 ffff000008981000
[ 305.491051] f480: ffff80003d051c00 ffff00000a5e8350 ffff00000859f358 ffff00000a5e7f50
[ 305.491444] f4a0: ffff00000859f330 0000000040000145 0000000000000000 0000000000000000
[ 305.492008] f4c0: 0001000000000000 0000000000000000 ffff00000a5e8350 ffff00000859f330
[ 305.493063] [<ffff00000808205c>] __bad_stack+0x88/0x8c
[ 305.493396] [<ffff00000859f330>] recursive_loop+0x10/0x48
[ 305.493731] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.494088] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.494425] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.494649] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.494898] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.495205] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.495453] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.495708] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.496000] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.496302] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.496644] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.496894] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.497138] [<ffff00000859f358>] recursive_loop+0x38/0x48
[ 305.497325] [<ffff00000859f3dc>] lkdtm_OVERFLOW+0x14/0x20
[ 305.497506] [<ffff00000859f314>] lkdtm_do_action+0x1c/0x28
[ 305.497786] [<ffff00000859f178>] direct_entry+0xe0/0x170
[ 305.498095] [<ffff000008345568>] full_proxy_write+0x60/0xa8
[ 305.498387] [<ffff0000081fb7f4>] __vfs_write+0x1c/0x128
[ 305.498679] [<ffff0000081fcc68>] vfs_write+0xa0/0x1b0
[ 305.498926] [<ffff0000081fe0fc>] SyS_write+0x44/0xa0
[ 305.499182] Exception stack(0xffff00000a5ebec0 to 0xffff00000a5ec000)
[ 305.499429] bec0: 0000000000000001 000000001c4cf5e0 0000000000000009 000000001c4cf5e0
[ 305.499674] bee0: 574f4c465245564f 0000000000000000 0000000000000000 8000000080808080
[ 305.499904] bf00: 0000000000000040 0000000000000038 fefefeff1b4bc2ff 7f7f7f7f7f7fff7f
[ 305.500189] bf20: 0101010101010101 0000000000000000 000000000047a4c8 0000000000000038
[ 305.500712] bf40: 0000000000000000 0000ffffa2601280 0000ffffc63f6068 00000000004b5000
[ 305.501241] bf60: 0000000000000001 000000001c4cf5e0 0000000000000009 000000001c4cf5e0
[ 305.501791] bf80: 0000000000000020 0000000000000000 00000000004b5000 000000001c4cc458
[ 305.502314] bfa0: 0000000000000000 0000ffffc63f7950 000000000040a3c4 0000ffffc63f70e0
[ 305.502762] bfc0: 0000ffffa2601268 0000000080000000 0000000000000001 0000000000000040
[ 305.503207] bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 305.503680] [<ffff000008082fb0>] el0_svc_naked+0x24/0x28
[ 305.504720] Kernel Offset: disabled
[ 305.505189] CPU features: 0x002082
[ 305.505473] Memory Limit: none
[ 305.506181] ---[ end Kernel panic - not syncing: kernel stack overflow
This patch was co-authored by Ard Biesheuvel and Mark Rutland.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
|
|
Both unwind_frame() and dump_backtrace() try to check whether a stack
address is sane to access, with very similar logic. Both will need
updating in order to handle overflow stacks.
Factor out this logic into a helper, so that we can avoid further
duplication when we add overflow stacks.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
|
|
This patch enables arm64 to be built with vmap'd task and IRQ stacks.
As vmap'd stacks are mapped at page granularity, stacks must be a multiple of
PAGE_SIZE. This means that a 64K page kernel must use stacks of at least 64K in
size.
To minimize the increase in Image size, IRQ stacks are dynamically allocated at
boot time, rather than embedding the boot CPU's IRQ stack in the kernel image.
This patch was co-authored by Ard Biesheuvel and Mark Rutland.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
|
|
We allocate our IRQ stacks using a percpu array. This allows us to generate our
IRQ stack pointers with adr_this_cpu, but bloats the kernel Image with the boot
CPU's IRQ stack. Additionally, these are packed with other percpu variables,
and aren't guaranteed to have guard pages.
When we enable VMAP_STACK we'll want to vmap our IRQ stacks also, in order to
provide guard pages and to permit more stringent alignment requirements. Doing
so will require that we use a percpu pointer to each IRQ stack, rather than
allocating a percpu IRQ stack in the kernel image.
This patch updates our IRQ stack code to use a percpu pointer to the base of
each IRQ stack. This will allow us to change the way the stack is allocated
with minimal changes elsewhere. In some cases we may try to backtrace before
the IRQ stack pointers are initialised, so on_irq_stack() is updated to account
for this.
In testing with cyclictest, there was no measureable difference between using
adr_this_cpu (for irq_stack) and ldr_this_cpu (for irq_stack_ptr) in the IRQ
entry path.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
|
|
Given that adr_this_cpu already requires a temp register in addition
to the destination register, tweak the instruction sequence so that sp
may be used as well.
This will simplify switching to per-cpu stacks in subsequent patches. While
this limits the range of adr_this_cpu, to +/-4GiB, we don't currently use
adr_this_cpu in modules, and this is not problematic for the main kernel image.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[Mark: add more commit text]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
|
|
The EFI stub is intimately coupled with the kernel, and takes advantage
of this by relocating the kernel at a weaker alignment than the
documented boot protocol mandates.
However, it does so by assuming it can align the kernel to the segment
alignment, and assumes that this is 64K. In subsequent patches, we'll
have to consider other details to determine this de-facto alignment
constraint.
This patch adds a new EFI_KIMG_ALIGN definition that will track the
kernel's de-facto alignment requirements. Subsequent patches will modify
this as required.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
|
|
Currently we define SEGMENT_ALIGN directly in our vmlinux.lds.S.
This is unfortunate, as the EFI stub currently open-codes the same
number, and in future we'll want to fiddle with this.
This patch moves the definition to our <asm/memory.h>, where it can be
used by both vmlinux.lds.S and the EFI stub code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
|
|
Before we add yet another stack to the kernel, it would be nice to
ensure that we consistently organise stack definitions and related
helper functions.
This patch moves the basic IRQ stack defintions to <asm/memory.h> to
live with their task stack counterparts. Helpers used for unwinding are
moved into <asm/stacktrace.h>, where subsequent patches will add helpers
for other stacks. Includes are fixed up accordingly.
This patch is a pure refactoring -- there should be no functional
changes as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
|
|
Currently we define THREAD_SIZE and THREAD_SIZE_ORDER separately, with
the latter dependent on particular CONFIG_ARM64_*K_PAGES definitions.
This is somewhat opaque, and will get in the way of future modifications
to THREAD_SIZE.
This patch cleans this up, defining both in terms of a common
THREAD_SHIFT, and using PAGE_SHIFT to calculate THREAD_SIZE_ORDER,
rather than using a number of definitions dependent on config symbols.
Subsequent patches will make use of this to alter the stack size used in
some configurations.
At the same time, these are moved into <asm/memory.h>, which will avoid
circular include issues in subsequent patches. To ensure that existing
code isn't adversely affected, <asm/thread_info.h> is updated to
transitively include these definitions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
|
|
Some headers rely on PAGE_* definitions from <asm/page.h>, but cannot
include this due to potential circular includes. For example, a number
of definitions in <asm/memory.h> rely on PAGE_SHIFT, and <asm/page.h>
includes <asm/memory.h>.
This requires users of these definitions to include both headers, which
is fragile and error-prone.
This patch ameliorates matters by moving the basic definitions out to a
new header, <asm/page-def.h>. Both <asm/page.h> and <asm/memory.h> are
updated to include this, avoiding this fragility, and avoiding the
possibility of circular include dependencies.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
|
|
For historical reasons, we leave the top 16 bytes of our task and IRQ
stacks unused, a practice used to ensure that the SP can always be
masked to find the base of the current stack (historically, where
thread_info could be found).
However, this is not necessary, as:
* When an exception is taken from a task stack, we decrement the SP by
S_FRAME_SIZE and stash the exception registers before we compare the
SP against the task stack. In such cases, the SP must be at least
S_FRAME_SIZE below the limit, and can be safely masked to determine
whether the task stack is in use.
* When transitioning to an IRQ stack, we'll place a dummy frame onto the
IRQ stack before enabling asynchronous exceptions, or executing code
we expect to trigger faults. Thus, if an exception is taken from the
IRQ stack, the SP must be at least 16 bytes below the limit.
* We no longer mask the SP to find the thread_info, which is now found
via sp_el0. Note that historically, the offset was critical to ensure
that cpu_switch_to() found the correct stack for new threads that
hadn't yet executed ret_from_fork().
Given that, this initial offset serves no purpose, and can be removed.
This brings us in-line with other architectures (e.g. x86) which do not
rely on this masking.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[Mark: rebase, kill THREAD_START_SP, commit msg additions]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
|
|
Commit a7be6e5a7f8d ("mm: drop useless local parameters of
__register_one_node()") removes the last user of parent_node().
The parent_node() macro in ARM64 platform is unnecessary.
Remove it for cleanup.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
http://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clockevents fixes from Daniel Lezcano:
" - Fix error check against IS_ERR() instead of NULL for the timer-of code (Dan Carpenter)
- Fix infinite recusion with ftrace for the ARM architected timer (Ding Tianhong)
- Fix the error code return in the em_sti's probe function (Gustavo A. R. Silva)
- Fix Kconfig dependency for the pistachio driver (Matt Redfearn)
- Fix mem frame loop initialization for the ARM architected timer (Matthias Kaehlcke)"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
enabled
On platforms with an arch timer erratum workaround, it's possible for
arch_timer_reg_read_stable() to recurse into itself when certain
tracing options are enabled, leading to stack overflows and related
problems.
For example, when PREEMPT_TRACER and FUNCTION_GRAPH_TRACER are
selected, it's possible to trigger this with:
$ mount -t debugfs nodev /sys/kernel/debug/
$ echo function_graph > /sys/kernel/debug/tracing/current_tracer
The problem is that in such cases, preempt_disable() instrumentation
attempts to acquire a timestamp via trace_clock(), resulting in a call
back to arch_timer_reg_read_stable(), and hence recursion.
This patch changes arch_timer_reg_read_stable() to use
preempt_{disable,enable}_notrace(), which avoids this.
This problem is similar to the fixed by upstream commit 96b3d28bf4
("sched/clock: Prevent tracing recursion in sched_clock_cpu()").
Fixes: 6acc71ccac71 ("arm64: arch_timer: Allows a CPU-specific erratum to only affect a subset of CPUs")
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Commit a1d5ebaf8ccd ("arm64: big-endian: don't treat code as data when
copying sigret code") moved the 32-bit sigreturn trampoline code from
the aarch32_sigret_code array to kuser32.S. The commit removed the
array definition from signal32.c, but not its declaration in
signal32.h. Remove the leftover declaration.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Generate irqentry and softirqentry text sections without
any Kconfig dependencies. This will add extra sections, but
there should be no performace impact.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S . Miller <davem@davemloft.net>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-cris-kernel@axis.com
Cc: mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/150172789110.27216.3955739126693102122.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Now that there are no users of smp_mb__before_spinlock() left, remove
it entirely.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since its inception, our understanding of ACQUIRE, esp. as applied to
spinlocks, has changed somewhat. Also, I wonder if, with a simple
change, we cannot make it provide more.
The problem with the comment is that the STORE done by spin_lock isn't
itself ordered by the ACQUIRE, and therefore a later LOAD can pass over
it and cross with any prior STORE, rendering the default WMB
insufficient (pointed out by Alan).
Now, this is only really a problem on PowerPC and ARM64, both of
which already defined smp_mb__before_spinlock() as a smp_mb().
At the same time, we can get a much stronger construct if we place
that same barrier _inside_ the spin_lock(). In that case we upgrade
the RCpc spinlock to an RCsc. That would make all schedule() calls
fully transitive against one another.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux into for-next/core
* 'arm64/exception-stack' of git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux:
arm64: unwind: remove sp from struct stackframe
arm64: unwind: reference pt_regs via embedded stack frame
arm64: unwind: disregard frame.sp when validating frame pointer
arm64: unwind: avoid percpu indirection for irq stack
arm64: move non-entry code out of .entry.text
arm64: consistently use bl for C exception entry
arm64: Add ASM_BUG()
|
|
Currently, may_use_simd() can return true if IRQs are disabled. If
the caller goes ahead and calls kernel_neon_begin(), this can
result in use of local_bh_enable() in an unsafe context.
In particular, __efi_fpsimd_begin() may do this when calling EFI as
part of system shutdown.
This patch ensures that callers don't think they can use
kernel_neon_begin() in such a context.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The unwind code sets the sp member of struct stackframe to
'frame pointer + 0x10' unconditionally, without regard for whether
doing so produces a legal value. So let's simply remove it now that
we have stopped using it anyway.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
|
|
As it turns out, the unwind code is slightly broken, and probably has
been for a while. The problem is in the dumping of the exception stack,
which is intended to dump the contents of the pt_regs struct at each
level in the call stack where an exception was taken and routed to a
routine marked as __exception (which means its stack frame is right
below the pt_regs struct on the stack).
'Right below the pt_regs struct' is ill defined, though: the unwind
code assigns 'frame pointer + 0x10' to the .sp member of the stackframe
struct at each level, and dump_backtrace() happily dereferences that as
the pt_regs pointer when encountering an __exception routine. However,
the actual size of the stack frame created by this routine (which could
be one of many __exception routines we have in the kernel) is not known,
and so frame.sp is pretty useless to figure out where struct pt_regs
really is.
So it seems the only way to ensure that we can find our struct pt_regs
when walking the stack frames is to put it at a known fixed offset of
the stack frame pointer that is passed to such __exception routines.
The simplest way to do that is to put it inside pt_regs itself, which is
the main change implemented by this patch. As a bonus, doing this allows
us to get rid of a fair amount of cruft related to walking from one stack
to the other, which is especially nice since we intend to introduce yet
another stack for overflow handling once we add support for vmapped
stacks. It also fixes an inconsistency where we only add a stack frame
pointing to ELR_EL1 if we are executing from the IRQ stack but not when
we are executing from the task stack.
To consistly identify exceptions regs even in the presence of exceptions
taken from entry code, we must check whether the next frame was created
by entry text, rather than whether the current frame was crated by
exception text.
To avoid backtracing using PCs that fall in the idmap, or are controlled
by userspace, we must explcitly zero the FP and LR in startup paths, and
must ensure that the frame embedded in pt_regs is zeroed upon entry from
EL0. To avoid these NULL entries showin in the backtrace, unwind_frame()
is updated to avoid them.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[Mark: compare current frame against .entry.text, avoid bogus PCs]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
|
|
Implement the set of copy functions with guarantees of a clean cache
upon completion necessary to support the pmem driver.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add a clean-to-point-of-persistence cache maintenance helper, and wire
up the basic architectural support for the pmem driver based on it.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[catalin.marinas@arm.com: move arch_*_pmem() functions to arch/arm64/mm/flush.c]
[catalin.marinas@arm.com: change dmb(sy) to dmb(osh)]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Cache clean to PoP is subject to the same access controls as to PoC, so
if we are trapping userspace cache maintenance with SCTLR_EL1.UCI, we
need to be prepared to handle it. To avoid getting into complicated
fights with binutils about ARMv8.2 options, we'll just cheat and use the
raw SYS instruction rather than the 'proper' DC alias.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The ARMv8.2-DCPoP feature introduces persistent memory support to the
architecture, by defining a point of persistence in the memory
hierarchy, and a corresponding cache maintenance operation, DC CVAP.
Expose the support via HWCAP and MRS emulation.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
__inval_cache_range() is already the odd one out among our data cache
maintenance routines as the only remaining range-based one; as we're
going to want an invalidation routine to call from C code for the pmem
API, let's tweak the prototype and name to bring it in line with the
clean operations, and to make its relationship with __dma_inv_area()
neatly mirror that of __clean_dcache_area_poc() and __dma_clean_area().
The loop clearing the early page tables gets mildly massaged in the
process for the sake of consistency.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Clearly, set_memory_valid() has never been seen in the same room as its
declaration... Whilst the type mismatch is such that kexec probably
wasn't broken in practice, fix it to match the definition as it should.
Fixes: 9b0aa14e3155 ("arm64: mm: add set_memory_valid()")
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently, when unwinding the call stack, we validate the frame pointer
of each frame against frame.sp, whose value is not clearly defined, and
which makes it more difficult to link stack frames together across
different stacks. It is far better to simply check whether the frame
pointer itself points into a valid stack.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
|
|
Our IRQ_STACK_PTR() and on_irq_stack() helpers both take a cpu argument,
used to generate a percpu address. In all cases, they are passed
{raw_,}smp_processor_id(), so this parameter is redundant.
Since {raw_,}smp_processor_id() use a percpu variable internally, this
approach means we generate a percpu offset to find the current cpu, then
use this to index an array of percpu offsets, which we then use to find
the current CPU's IRQ stack pointer. Thus, most of the work is
redundant.
Instead, we can consistently use raw_cpu_ptr() to generate the CPU's
irq_stack pointer by simply adding the percpu offset to the irq_stack
address, which is simpler in both respects.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
|
|
Currently, cpu_switch_to and ret_from_fork both live in .entry.text,
though neither form the critical path for an exception entry.
In subsequent patches, we will require that code in .entry.text is part
of the critical path for exception entry, for which we can assume
certain properties (e.g. the presence of exception regs on the stack).
Neither cpu_switch_to nor ret_from_fork will meet these requirements, so
we must move them out of .entry.text. To ensure that neither are kprobed
after being moved out of .entry.text, we must explicitly blacklist them,
requiring a new NOKPROBE() asm helper.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
|
|
Currently. we can only use BUG() from C code, though there are
situations where we would like an equivalent mechanism in assembly code.
This patch refactors our BUG() definition such that it can be used in
either C or assembly, in the form of a new ASM_BUG().
The refactoring requires the removal of escape sequences, such as '\n'
and '\t', but these aren't strictly necessary as we can use ';' to
terminate assembler statements.
The low-level assembly is factored out into <asm/asm-bug.h>, with
<asm/bug.h> retained as the C wrapper.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
|
|
When receiving unhandled faults from the CPU, description is very sparse.
Adding information about faults decoded from ESR.
Added defines to esr.h corresponding ESR fields. Values are based on ARM
Archtecture Reference Manual (DDI 0487B.a), section D7.2.28 ESR_ELx, Exception
Syndrome Register (ELx) (pages D7-2275 to D7-2280).
New output is of the form:
[ 77.818059] Mem abort info:
[ 77.820826] Exception class = DABT (current EL), IL = 32 bits
[ 77.826706] SET = 0, FnV = 0
[ 77.829742] EA = 0, S1PTW = 0
[ 77.832849] Data abort info:
[ 77.835713] ISV = 0, ISS = 0x00000070
[ 77.839522] CM = 0, WnR = 1
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: fix "%lu" in a pr_alert() call]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The -1 "no syscall" value is written in various ways, shared with
the user ABI in some places, and generally obscure.
This patch attempts to make things a little more consistent and
readable by replacing all these uses with a single #define. A
couple of symbolic helpers are provided to clarify the intent
further.
Because the in-syscall check in do_signal() is changed from >= 0 to
!= NO_SYSCALL by this patch, different behaviour may be observable
if syscallno is set to values less than -1 by a tracer. However,
this is not different from the behaviour that is already observable
if a tracer sets syscallno to a value >= __NR_(compat_)syscalls.
It appears that this can cause spurious syscall restarting, but
that is not a new behaviour either, and does not appear harmful.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The upper 32 bits of the syscallno field in thread_struct are
handled inconsistently, being sometimes zero extended and sometimes
sign-extended. In fact, only the lower 32 bits seem to have any
real significance for the behaviour of the code: it's been OK to
handle the upper bits inconsistently because they don't matter.
Currently, the only place I can find where those bits are
significant is in calling trace_sys_enter(), which may be
unintentional: for example, if a compat tracer attempts to cancel a
syscall by passing -1 to (COMPAT_)PTRACE_SET_SYSCALL at the
syscall-enter-stop, it will be traced as syscall 4294967295
rather than -1 as might be expected (and as occurs for a native
tracer doing the same thing). Elsewhere, reads of syscallno cast
it to an int or truncate it.
There's also a conspicuous amount of code and casting to bodge
around the fact that although semantically an int, syscallno is
stored as a u64.
Let's not pretend any more.
In order to preserve the stp x instruction that stores the syscall
number in entry.S, this patch special-cases the layout of struct
pt_regs for big endian so that the newly 32-bit syscallno field
maps onto the low bits of the stored value. This is not beautiful,
but benchmarking of the getpid syscall on Juno suggests indicates a
minor slowdown if the stp is split into an stp x and stp w.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The crypto code currently relies on kernel_mode_begin_partial() being
available. Until the corresponding crypto patches are merged, define
this macro temporarily, though with different semantics as it cannot be
called in interrupt context.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The bitmask used to define these values produces overflow, as seen by
this compiler warning:
arch/arm64/kernel/head.S:47:8: warning:
integer overflow in preprocessor expression
#elif (PAGE_OFFSET & 0x1fffff) != 0
^~~~~~~~~~~
arch/arm64/include/asm/memory.h:52:46: note:
expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (UL(0xffffffffffffffff) << (VA_BITS -
1))
~~~~~~~~~~~~~~~~~~ ^
It would be preferrable to use GENMASK_ULL() instead, but it's not set
up to be used from assembly (the UL() macro token pastes UL suffixes
when not included in assembly sources).
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Yury Norov <ynorov@caviumnetworks.com>
Suggested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Support for kernel-mode NEON to be nested and/or used in hardirq
context adds significant complexity, and the benefits may be
marginal. In practice, kernel-mode NEON is not used in hardirq
context, and is rarely used in softirq context (by certain mac80211
drivers).
This patch implements an arm64 may_use_simd() function to allow
clients to check whether kernel-mode NEON is usable in the current
context, and simplifies kernel_neon_{begin,end}() to handle only
saving of the task FPSIMD state (if any). Without nesting, there
is no other state to save.
The partial fpsimd save/restore functions become redundant as a
result of these changes, so they are removed too.
The save/restore model is changed to operate directly on
task_struct without additional percpu storage. This simplifies the
code and saves a bit of memory, but means that softirqs must now be
disabled when manipulating the task fpsimd state from task context:
correspondingly, preempt_{en,dis}sable() calls are upgraded to
local_bh_{en,dis}able() as appropriate. fpsimd_thread_switch()
already runs with hardirqs disabled and so is already protected
from softirqs.
These changes should make it easier to support kernel-mode NEON in
the presence of the Scalable Vector extension in the future.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In order to be able to cope with kernel-mode NEON being unavailable
in hardirq/nmi context and non-nestable, we need special handling
for EFI runtime service calls that may be made during an interrupt
that interrupted a kernel_neon_begin()..._end() block. This will
occur if the kernel tries to write diagnostic data to EFI
persistent storage during a panic triggered by an NMI for example.
EFI runtime services specify an ABI that clobbers the FPSIMD state,
rather than being able to use it optionally as an accelerator.
This means that EFI is really a special case and can be handled
specially.
To enable EFI calls from interrupts, this patch creates dedicated
__efi_fpsimd_{begin,end}() helpers solely for this purpose, which
save/restore to a separate percpu buffer if called in a context
where kernel_neon_begin() is not usable.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
asm/neon.h doesn't have a header inclusion guard, but it should
have one for consistency with other headers.
This patch adds a suitable guard.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In preparation of modifying the logic that decides whether kernel mode
NEON is allowable, which is required for SVE support, introduce an
implementation of may_use_simd() that reflects the current reality, i.e.,
that SIMD is allowed in any context.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I'd been collecting these whilst we debugged a CPU hotplug failure,
but we ended up diagnosing that one to tglx, who has taken a fix via
the -tip tree separately.
We're seeing some NFS issues that we haven't gotten to the bottom of
yet, and we've uncovered some issues with our backtracing too so there
might be another fixes pull before we're done.
Summary:
- Ensure we have a guard page after the kernel image in vmalloc
- Fix incorrect prefetch stride in copy_page
- Ensure irqs are disabled in die()
- Fix for event group validation in QCOM L2 PMU driver
- Fix requesting of PMU IRQs on AMD Seattle
- Minor cleanups and fixes"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mmu: Place guard page after mapping of kernel image
drivers/perf: arm_pmu: Request PMU SPIs with IRQF_PER_CPU
arm64: sysreg: Fix unprotected macro argmuent in write_sysreg
perf: qcom_l2: fix column exclusion check
arm64/lib: copy_page: use consistent prefetch stride
arm64/numa: Drop duplicate message
perf: Convert to using %pOF instead of full_name
arm64: Convert to using %pOF instead of full_name
arm64: traps: disable irq in die()
arm64: atomics: Remove '&' from '+&' asm constraint in lse atomics
arm64: uaccess: Remove redundant __force from addr cast in __range_ok
|
|
write_sysreg() may misparse the value argument because it is used
without parentheses to protect it.
This patch adds the ( ) in order to avoid any surprises.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
[will: same change to write_sysreg_s]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Ingo Molnar:
"A fix to WARN_ON_ONCE() done by modules, plus a MAINTAINERS update"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debug: Fix WARN_ON_ONCE() for modules
MAINTAINERS: Update the PTRACE entry
|
|
Mike Galbraith reported a situation where a WARN_ON_ONCE() call in DRM
code turned into an oops. As it turns out, WARN_ON_ONCE() seems to be
completely broken when called from a module.
The bug was introduced with the following commit:
19d436268dde ("debug: Add _ONCE() logic to report_bug()")
That commit changed WARN_ON_ONCE() to move its 'once' logic into the bug
trap handler. It requires a writable bug table so that the BUGFLAG_DONE
bit can be written to the flags to indicate the first warning has
occurred.
The bug table was made writable for vmlinux, which relies on
vmlinux.lds.S and vmlinux.lds.h for laying out the sections. However,
it wasn't made writable for modules, which rely on the ELF section
header flags.
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 19d436268dde ("debug: Add _ONCE() logic to report_bug()")
Link: http://lkml.kernel.org/r/a53b04235a65478dd9afc51f5b329fdc65c84364.1500095401.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The lse implementation of atomic64_dec_if_positive uses the '+&' constraint,
but the '&' is redundant and confusing in this case, since early clobber
on a read/write operand is a strange concept.
Replace the constraint with '+'.
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Casting a pointer to an integral type doesn't require a __force
attribute, because you'll need to cast back to a pointer in order to
dereference the thing anyway.
This patch removes the redundant __force cast from __range_ok.
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uacess-unaligned removal from Al Viro:
"That stuff had just one user, and an exotic one, at that - binfmt_flat
on arm and m68k"
* 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kill {__,}{get,put}_user_unaligned()
binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Move generic-y of exported headers to uapi/asm/Kbuild for complete
de-coupling of UAPI
- Clean up scripts/Makefile.headersinst
- Fix host programs for 32 bit machine with XFS file system
* tag 'kbuild-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
kbuild: Enable Large File Support for hostprogs
kbuild: remove wrapper files handling from Makefile.headersinst
kbuild: split exported generic header creation into uapi-asm-generic
kbuild: do not include old-kbuild-file from Makefile.headersinst
xtensa: move generic-y of exported headers to uapi/asm/Kbuild
unicore32: move generic-y of exported headers to uapi/asm/Kbuild
tile: move generic-y of exported headers to uapi/asm/Kbuild
sparc: move generic-y of exported headers to uapi/asm/Kbuild
sh: move generic-y of exported headers to uapi/asm/Kbuild
parisc: move generic-y of exported headers to uapi/asm/Kbuild
openrisc: move generic-y of exported headers to uapi/asm/Kbuild
nios2: move generic-y of exported headers to uapi/asm/Kbuild
nios2: remove unneeded arch/nios2/include/(generated/)asm/signal.h
microblaze: move generic-y of exported headers to uapi/asm/Kbuild
metag: move generic-y of exported headers to uapi/asm/Kbuild
m68k: move generic-y of exported headers to uapi/asm/Kbuild
m32r: move generic-y of exported headers to uapi/asm/Kbuild
ia64: remove redundant generic-y += kvm_para.h from asm/Kbuild
hexagon: move generic-y of exported headers to uapi/asm/Kbuild
h8300: move generic-y of exported headers to uapi/asm/Kbuild
...
|
|
Use the ascii-armor canary to prevent unterminated C string overflows
from being able to successfully overwrite the canary, even if they
somehow obtain the canary value.
Inspired by execshield ascii-armor and Daniel Micay's linux-hardened
tree.
Link: http://lkml.kernel.org/r/20170524155751.424-5-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
