| Age | Commit message (Collapse) | Author |
|---|
|
The core kprobes code uses kprobe_opcode_t for the in-memory
representation of an instruction, using 'kprobe_opcode_t *' for XOL
slots. As arm64 instructions are always little-endian 32-bit values,
kprobes_opcode_t should be __le32, but at the moment kprobe_opcode_t
is typedef'd to u32.
Today there is no functional issue as we convert values via
cpu_to_le32() and le32_to_cpu() where necessary, but these conversions
are inconsistent with the types used, causing sparse warnings:
| CHECK arch/arm64/kernel/probes/kprobes.c
| arch/arm64/kernel/probes/kprobes.c:102:21: warning: cast to restricted __le32
| CHECK arch/arm64/kernel/probes/decode-insn.c
| arch/arm64/kernel/probes/decode-insn.c:122:46: warning: cast to restricted __le32
| arch/arm64/kernel/probes/decode-insn.c:124:50: warning: cast to restricted __le32
| arch/arm64/kernel/probes/decode-insn.c:136:31: warning: cast to restricted __le32
Improve this by making kprobes_opcode_t a typedef for __le32 and
consistently using this for pointers to executable instructions. With
this change we can rely on the type system to tell us where conversions
are necessary.
Since kprobe::opcode is changed from u32 to __le32, the existing
le32_to_cpu() converion moves from the point this is initialized (in
arch_prepare_kprobe()) to the points this is consumed when passed to
a handler or text patching function. As kprobe::opcode isn't altered or
consumed elsewhere, this shouldn't result in a functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We share struct arch_probe_insn between krpboes and uprobes, but most of
its fields aren't necessary for uprobes:
* The 'insn' field is only used by kprobes as a pointer to the XOL slot.
* The 'restore' field is only used by probes as the PC to restore after
stepping an instruction in the XOL slot.
* The 'pstate_cc' field isn't used by kprobes or uprobes, and seems to
only exist as a result of copy-pasting the 32-bit arm implementation
of kprobes.
As these fields live in struct arch_probe_insn they cannot use
definitions that only exist when CONFIG_KPROBES=y, such as the
kprobe_opcode_t typedef, which we'd like to use in subsequent patches.
Clean this up by removing the 'pstate_cc' field, and moving the
kprobes-specific fields into the kprobes-specific struct
arch_specific_insn. To make it clear that the fields are related to
stepping instructions in the XOL slot, 'insn' is renamed to 'xol_insn'
and 'restore' is renamed to 'xol_restore'
At the same time, remove the misleading and useless comment above struct
arch_probe_insn.
The should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
No implementation of this hook uses the passed in timekeeper anymore.
This avoids including a non-VDSO header while building the VDSO, which can
lead to compilation errors.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20241010-vdso-generic-arch_update_vsyscall-v1-1-7fe5a3ea4382@linutronix.de
|
|
Most architectures use pt_regs within ftrace_regs making a lot of the
accessor functions just calls to the pt_regs internally. Instead of
duplication this effort, use a HAVE_ARCH_FTRACE_REGS for architectures
that have their own ftrace_regs that is not based on pt_regs and will
define all the accessor functions, and for the architectures that just use
pt_regs, it will leave it undefined, and the default accessor functions
will be used.
Note, this will also make it easier to add new accessor functions to
ftrace_regs as it will mean having to touch less architectures.
Cc: <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241010202114.2289f6fd@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # powerpc
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
ftrace_regs was created to hold registers that store information to save
function parameters, return value and stack. Since it is a subset of
pt_regs, it should only be used by its accessor functions. But because
pt_regs can easily be taken from ftrace_regs (on most archs), it is
tempting to use it directly. But when running on other architectures, it
may fail to build or worse, build but crash the kernel!
Instead, make struct ftrace_regs an empty structure and have the
architectures define __arch_ftrace_regs and all the accessor functions
will typecast to it to get to the actual fields. This will help avoid
usage of ftrace_regs directly.
Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.
At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.
Tested with the following:
| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
| void *addr;
|
| asm volatile(
| " adrp %x0, adrp_self\n"
| " add %x0, %x0, :lo12:adrp_self\n"
| : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
| void *ptr = adrp_self();
| bool equal = (ptr == adrp_self);
|
| printf("adrp_self => %p\n"
| "adrp_self() => %p\n"
| "%s\n",
| adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
| return 0;
| }
.... where the adrp_self() function was compiled to:
| 00000000004007e0 <adrp_self>:
| 4007e0: 90000000 adrp x0, 400000 <__ehdr_start>
| 4007e4: 911f8000 add x0, x0, #0x7e0
| 4007e8: d65f03c0 ret
Before this patch, the ADRP is not recognized, and is assumed to be
steppable, resulting in corruption of the result:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL
After this patch, the ADRP is correctly recognized and simulated:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
Fixes: 9842ceae9fa8 ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently, when a nested MMU is repurposed for some other MMU context,
KVM unmaps everything during vcpu_load() while holding the MMU lock for
write. This is quite a performance bottleneck for large nested VMs, as
all vCPU scheduling will spin until the unmap completes.
Start punting the MMU cleanup to a vCPU request, where it is then
possible to periodically release the MMU lock and CPU in the presence of
contention.
Ensure that no vCPU winds up using a stale MMU by tracking the pending
unmap on the S2 MMU itself and requesting an unmap on every vCPU that
finds it.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241007233028.2236133-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Right now the nested code allows unmap operations on a shadow stage-2 to
block unconditionally. This is wrong in a couple places, such as a
non-blocking MMU notifier or on the back of a sched_in() notifier as
part of shadow MMU recycling.
Carry through whether or not blocking is allowed to
kvm_pgtable_stage2_unmap(). This 'fixes' an issue where stage-2 MMU
reclaim would precipitate a stack overflow from a pile of kvm_sched_in()
callbacks, all trying to recycle a stage-2 MMU.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241007233028.2236133-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
|
|
Provide a new register type NT_ARM_GCS reporting the current GCS mode
and pointer for EL0. Due to the interactions with allocation and
deallocation of Guarded Control Stacks we do not permit any changes to
the GCS mode via ptrace, only GCSPR_EL0 may be changed.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-27-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add a context for the GCS state and include it in the signal context when
running on a system that supports GCS. We reuse the same flags that the
prctl() uses to specify which GCS features are enabled and also provide the
current GCS pointer.
We do not support enabling GCS via signal return, there is a conflict
between specifying GCSPR_EL0 and allocation of a new GCS and this is not
an ancticipated use case. We also enforce GCS configuration locking on
signal return.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Acked-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-26-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When invoking a signal handler we use the GCS configuration and stack
for the current thread.
Since we implement signal return by calling the signal handler with a
return address set up pointing to a trampoline in the vDSO we need to
also configure any active GCS for this by pushing a frame for the
trampoline onto the GCS. If we do not do this then signal return will
generate a GCS protection fault.
In order to guard against attempts to bypass GCS protections via signal
return we only allow returning with GCSPR_EL0 pointing to an address
where it was previously preempted by a signal. We do this by pushing a
cap onto the GCS, this takes the form of an architectural GCS cap token
with the top bit set and token type of 0 which we add on signal entry
and validate and pop off on signal return. The combination of the top
bit being set and the token type mean that this can't be interpreted as
a valid token or address.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-25-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Implement the architecture neutral prctl() interface for setting the
shadow stack status, this supports setting and reading the current GCS
configuration for the current thread.
Userspace can enable basic GCS functionality and additionally also
support for GCS pushes and arbitrary GCS stores. It is expected that
this prctl() will be called very early in application startup, for
example by the dynamic linker, and not subsequently adjusted during
normal operation. Users should carefully note that after enabling GCS
for a thread GCS will become active with no call stack so it is not
normally possible to return from the function that invoked the prctl().
State is stored per thread, enabling GCS for a thread causes a GCS to be
allocated for that thread.
Userspace may lock the current GCS configuration by specifying
PR_SHADOW_STACK_ENABLE_LOCK, this prevents any further changes to the
GCS configuration via any means.
If GCS is not being enabled then all flags other than _LOCK are ignored,
it is not possible to enable stores or pops without enabling GCS.
When disabling the GCS we do not free the allocated stack, this allows
for inspection of the GCS after disabling as part of fault reporting.
Since it is not an expected use case and since it presents some
complications in determining what to do with previously initialsed data
on the GCS attempts to reenable GCS after this are rejected. This can
be revisted if a use case arises.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-23-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When a new thread is created by a thread with GCS enabled the GCS needs
to be specified along with the regular stack.
Unfortunately plain clone() is not extensible and existing clone3()
users will not specify a stack so all existing code would be broken if
we mandated specifying the stack explicitly. For compatibility with
these cases and also x86 (which did not initially implement clone3()
support for shadow stacks) if no GCS is specified we will allocate one
so when a thread is created which has GCS enabled allocate one for it.
We follow the extensively discussed x86 implementation and allocate
min(RLIMIT_STACK/2, 2G). Since the GCS only stores the call stack and not
any variables this should be more than sufficient for most applications.
GCSs allocated via this mechanism will be freed when the thread exits.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Acked-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-22-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There are two registers controlling the GCS state of EL0, GCSPR_EL0 which
is the current GCS pointer and GCSCRE0_EL1 which has enable bits for the
specific GCS functionality enabled for EL0. Manage these on context switch
and process lifetime events, GCS is reset on exec(). Also ensure that
any changes to the GCS memory are visible to other PEs and that changes
from other PEs are visible on this one by issuing a GCSB DSYNC when
moving to or from a thread with GCS.
Since the current GCS configuration of a thread will be visible to
userspace we store the configuration in the format used with userspace
and provide a helper which configures the system register as needed.
On systems that support GCS we always allow access to GCSPR_EL0, this
facilitates reporting of GCS faults if userspace implements disabling of
GCS on error - the GCS can still be discovered and examined even if GCS
has been disabled.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-21-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
A new exception code is defined for GCS specific faults other than
standard load/store faults, for example GCS token validation failures,
add handling for this. These faults are reported to userspace as
segfaults with code SEGV_CPERR (protection error), mirroring the
reporting for x86 shadow stack errors.
GCS faults due to memory load/store operations generate data aborts with
a flag set, these will be handled separately as part of the data abort
handling.
Since we do not currently enable GCS for EL1 we should not get any faults
there but while we're at it we wire things up there, treating any GCS
fault as fatal.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-19-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Provide a hwcap to enable userspace to detect support for GCS.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Yury Khrustalev <yury.khrustalev@arm.com>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-18-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Map pages flagged as being part of a GCS as such rather than using the
full set of generic VM flags.
This is done using a conditional rather than extending the size of
protection_map since that would make for a very sparse array.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-15-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pages used for guarded control stacks need to be described to the hardware
using the Permission Indirection Extension, GCS is not supported without
PIE. In order to support copy on write for guarded stacks we allocate two
values, one for active GCSs and one for GCS pages marked as read only prior
to copy.
Since the actual effect is defined using PIE the specific bit pattern used
does not matter to the hardware but we choose two values which differ only
in PTE_WRITE in order to help share code with non-PIE cases.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-13-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add a cpufeature for GCS, allowing other code to conditionally support it
at runtime.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-12-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There is a control HCRX_EL2.GCSEn which must be set to allow GCS
features to take effect at lower ELs and also fine grained traps for GCS
usage at EL0 and EL1. Configure all these to allow GCS usage by EL0 and
EL1.
We also initialise GCSCR_EL1 and GCSCRE0_EL1 to ensure that we can
execute function call instructions without faulting regardless of the
state when the kernel is started.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-11-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In order for EL1 to write to an EL0 GCS it must use the GCSSTTR instruction
rather than a normal STTR. Provide a put_user_gcs() which does this.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-10-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Define C callable functions for GCS instructions used by the kernel. In
order to avoid ambitious toolchain requirements for GCS support these are
manually encoded, this means we have fixed register numbers which will be
a bit limiting for the compiler but none of these should be used in
sufficiently fast paths for this to be a problem.
Note that GCSSTTR is used to store to EL0.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-9-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The architecture defines a format for guarded control stack caps, used
to mark the top of an unused GCS in order to limit the potential for
exploitation via stack switching. Add definitions associated with these.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-8-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently arch_validate_flags() is written in a very non-extensible
fashion, returning immediately if MTE is not supported and writing the MTE
check as a direct return. Since we will want to add more checks for GCS
refactor the existing code to be more extensible, no functional change
intended.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-3-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Oliver reports that the kvm_has_feat() helper is not behaviing as
expected for negative feature. On investigation, the main issue
seems to be caused by the following construct:
#define get_idreg_field(kvm, id, fld) \
(id##_##fld##_SIGNED ? \
get_idreg_field_signed(kvm, id, fld) : \
get_idreg_field_unsigned(kvm, id, fld))
where one side of the expression evaluates as something signed,
and the other as something unsigned. In retrospect, this is totally
braindead, as the compiler converts this into an unsigned expression.
When compared to something that is 0, the test is simply elided.
Epic fail. Similar issue exists in the expand_field_sign() macro.
The correct way to handle this is to chose between signed and unsigned
comparisons, so that both sides of the ternary expression are of the
same type (bool).
In order to keep the code readable (sort of), we introduce new
comparison primitives taking an operator as a parameter, and
rewrite the kvm_has_feat*() helpers in terms of these primitives.
Fixes: c62d7a23b947 ("KVM: arm64: Add feature checking helpers")
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Oliver Upton <oliver.upton@linux.dev>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241002204239.2051637-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add cputype definitions for Neoverse-N3. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-261 ("MIDR_EL1 bit descriptions")
in issue 02 of the Neoverse-N3 TRM, which can be found at:
https://developer.arm.com/documentation/107997/0000/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240930111705.3352047-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
|
|
Support huge pfnmaps by using bit 56 (PTE_SPECIAL) for "special" on
pmds/puds. Provide the pmd/pud helpers to set/get special bit.
There's one more thing missing for arm64 which is the pxx_pgprot() for
pmd/pud. Add them too, which is mostly the same as the pte version by
dropping the pfn field. These helpers are essential to be used in the new
follow_pfnmap*() API to report valid pgprot_t results.
Note that arm64 doesn't yet support huge PUD yet, but it's still
straightforward to provide the pud helpers that we need altogether. Only
PMD helpers will make an immediate benefit until arm64 will support huge
PUDs first in general (e.g. in THPs).
Link: https://lkml.kernel.org/r/20240826204353.2228736-19-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There're:
- 8 archs (arc, arm64, include, mips, powerpc, s390, sh, x86) that
support pte_pgprot().
- 2 archs (x86, sparc) that support pmd_pgprot().
- 1 arch (x86) that support pud_pgprot().
Always define them to be used in generic code, and then we don't need to
fiddle with "#ifdef"s when doing so.
Link: https://lkml.kernel.org/r/20240826204353.2228736-9-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull kvm updates from Paolo Bonzini:
"These are the non-x86 changes (mostly ARM, as is usually the case).
The generic and x86 changes will come later"
ARM:
- New Stage-2 page table dumper, reusing the main ptdump
infrastructure
- FP8 support
- Nested virtualization now supports the address translation
(FEAT_ATS1A) family of instructions
- Add selftest checks for a bunch of timer emulation corner cases
- Fix multiple cases where KVM/arm64 doesn't correctly handle the
guest trying to use a GICv3 that wasn't advertised
- Remove REG_HIDDEN_USER from the sysreg infrastructure, making
things little simpler
- Prevent MTE tags being restored by userspace if we are actively
logging writes, as that's a recipe for disaster
- Correct the refcount on a page that is not considered for MTE tag
copying (such as a device)
- When walking a page table to split block mappings, synchronize only
at the end the walk rather than on every store
- Fix boundary check when transfering memory using FFA
- Fix pKVM TLB invalidation, only affecting currently out of tree
code but worth addressing for peace of mind
LoongArch:
- Revert qspinlock to test-and-set simple lock on VM.
- Add Loongson Binary Translation extension support.
- Add PMU support for guest.
- Enable paravirt feature control from VMM.
- Implement function kvm_para_has_feature().
RISC-V:
- Fix sbiret init before forwarding to userspace
- Don't zero-out PMU snapshot area before freeing data
- Allow legacy PMU access from guest
- Fix to allow hpmcounter31 from the guest"
* tag 'for-linus-non-x86' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (64 commits)
LoongArch: KVM: Implement function kvm_para_has_feature()
LoongArch: KVM: Enable paravirt feature control from VMM
LoongArch: KVM: Add PMU support for guest
KVM: arm64: Get rid of REG_HIDDEN_USER visibility qualifier
KVM: arm64: Simplify visibility handling of AArch32 SPSR_*
KVM: arm64: Simplify handling of CNTKCTL_EL12
LoongArch: KVM: Add vm migration support for LBT registers
LoongArch: KVM: Add Binary Translation extension support
LoongArch: KVM: Add VM feature detection function
LoongArch: Revert qspinlock to test-and-set simple lock on VM
KVM: arm64: Register ptdump with debugfs on guest creation
arm64: ptdump: Don't override the level when operating on the stage-2 tables
arm64: ptdump: Use the ptdump description from a local context
arm64: ptdump: Expose the attribute parsing functionality
KVM: arm64: Add memory length checks and remove inline in do_ffa_mem_xfer
KVM: arm64: Move pagetable definitions to common header
KVM: arm64: nv: Add support for FEAT_ATS1A
KVM: arm64: nv: Plumb handling of AT S1* traps from EL2
KVM: arm64: nv: Make AT+PAN instructions aware of FEAT_PAN3
KVM: arm64: nv: Sanitise SCTLR_EL1.EPAN according to VM configuration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
|
|
Hook up the generic vDSO implementation to the aarch64 vDSO data page.
The _vdso_rng_data required data is placed within the _vdso_data vvar
page, by using a offset larger than the vdso_data.
The vDSO function requires a ChaCha20 implementation that does not write
to the stack, and that can do an entire ChaCha20 permutation. The one
provided uses NEON on the permute operation, with a fallback to the
syscall for chips that do not support AdvSIMD.
This also passes the vdso_test_chacha test along with
vdso_test_getrandom. The vdso_test_getrandom bench-single result on
Neoverse-N1 shows:
vdso: 25000000 times in 0.783884250 seconds
libc: 25000000 times in 8.780275399 seconds
syscall: 25000000 times in 8.786581518 seconds
A small fixup to arch/arm64/include/asm/mman.h was required to avoid
pulling kernel code into the vDSO, similar to what's already done in
arch/arm64/include/asm/rwonce.h.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Currently alternative_has_cap_unlikely() can be used in VDSO code, but
alternative_has_cap_likely() cannot as it references alt_cb_patch_nops,
which is not available when linking the VDSO. This is unfortunate as it
would be useful to have alternative_has_cap_likely() available in VDSO
code.
The use of alt_cb_patch_nops was added in commit:
d926079f17bf8aa4 ("arm64: alternatives: add shared NOP callback")
... as removing duplicate NOPs within the kernel Image saved areasonable
amount of space.
Given the VDSO code will have nowhere near as many alternative branches
as the main kernel image, this isn't much of a concern, and a few extra
nops isn't a massive problem.
Change alternative_has_cap_likely() to only use alt_cb_patch_nops for
the main kernel image, and allow duplicate NOPs in VDSO code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
* for-next/timers:
arm64: Implement prctl(PR_{G,S}ET_TSC)
|
|
* for-next/poe: (31 commits)
arm64: pkeys: remove redundant WARN
kselftest/arm64: Add test case for POR_EL0 signal frame records
kselftest/arm64: parse POE_MAGIC in a signal frame
kselftest/arm64: add HWCAP test for FEAT_S1POE
selftests: mm: make protection_keys test work on arm64
selftests: mm: move fpregs printing
kselftest/arm64: move get_header()
arm64: add Permission Overlay Extension Kconfig
arm64: enable PKEY support for CPUs with S1POE
arm64: enable POE and PIE to coexist
arm64/ptrace: add support for FEAT_POE
arm64: add POE signal support
arm64: implement PKEYS support
arm64: add pte_access_permitted_no_overlay()
arm64: handle PKEY/POE faults
arm64: mask out POIndex when modifying a PTE
arm64: convert protection key into vm_flags and pgprot values
arm64: add POIndex defines
arm64: re-order MTE VM_ flags
arm64: enable the Permission Overlay Extension for EL0
...
|
|
* for-next/pkvm-guest:
arm64: smccc: Reserve block of KVM "vendor" services for pKVM hypercalls
drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall
arm64: mm: Add confidential computing hook to ioremap_prot()
drivers/virt: pkvm: Hook up mem_encrypt API using pKVM hypercalls
arm64: mm: Add top-level dispatcher for internal mem_encrypt API
drivers/virt: pkvm: Add initial support for running as a protected guest
firmware/smccc: Call arch-specific hook on discovering KVM services
|
|
* for-next/perf: (33 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
perf/arm-cmn: Ensure dtm_idx is big enough
perf/arm-cmn: Fix CCLA register offset
perf/arm-cmn: Refactor node ID handling. Again.
drivers/perf: hisi_pcie: Export supported Root Ports [bdf_min, bdf_max]
drivers/perf: hisi_pcie: Fix TLP headers bandwidth counting
drivers/perf: hisi_pcie: Record hardware counts correctly
drivers/perf: arm_spe: Use perf_allow_kernel() for permissions
perf/dwc_pcie: Add support for QCOM vendor devices
...
|
|
* for-next/mm:
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
|
|
* for-next/misc:
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: Constify struct kobj_type
arm64: smp: smp_send_stop() and crash_smp_send_stop() should try non-NMI first
arm64/sve: Remove unused declaration read_smcr_features()
arm64: mm: Remove unused declaration early_io_map()
arm64: el2_setup.h: Rename some labels to be more diff-friendly
arm64: signal: Fix some under-bracketed UAPI macros
arm64/mm: Drop TCR_SMP_FLAGS
arm64/mm: Drop PMD_SECT_VALID
|
|
* kvm-arm64/s2-ptdump:
: .
: Stage-2 page table dumper, reusing the main ptdump infrastructure,
: courtesy of Sebastian Ene. From the cover letter:
:
: "This series extends the ptdump support to allow dumping the guest
: stage-2 pagetables. When CONFIG_PTDUMP_STAGE2_DEBUGFS is enabled, ptdump
: registers the new following files under debugfs:
: - /sys/debug/kvm/<guest_id>/stage2_page_tables
: - /sys/debug/kvm/<guest_id>/stage2_levels
: - /sys/debug/kvm/<guest_id>/ipa_range
:
: This allows userspace tools (eg. cat) to dump the stage-2 pagetables by
: reading the 'stage2_page_tables' file.
: [...]"
: .
KVM: arm64: Register ptdump with debugfs on guest creation
arm64: ptdump: Don't override the level when operating on the stage-2 tables
arm64: ptdump: Use the ptdump description from a local context
arm64: ptdump: Expose the attribute parsing functionality
KVM: arm64: Move pagetable definitions to common header
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-at-pan:
: .
: Add NV support for the AT family of instructions, which mostly results
: in adding a page table walker that deals with most of the complexity
: of the architecture.
:
: From the cover letter:
:
: "Another task that a hypervisor supporting NV on arm64 has to deal with
: is to emulate the AT instruction, because we multiplex all the S1
: translations on a single set of registers, and the guest S2 is never
: truly resident on the CPU.
:
: So given that we lie about page tables, we also have to lie about
: translation instructions, hence the emulation. Things are made
: complicated by the fact that guest S1 page tables can be swapped out,
: and that our shadow S2 is likely to be incomplete. So while using AT
: to emulate AT is tempting (and useful), it is not going to always
: work, and we thus need a fallback in the shape of a SW S1 walker."
: .
KVM: arm64: nv: Add support for FEAT_ATS1A
KVM: arm64: nv: Plumb handling of AT S1* traps from EL2
KVM: arm64: nv: Make AT+PAN instructions aware of FEAT_PAN3
KVM: arm64: nv: Sanitise SCTLR_EL1.EPAN according to VM configuration
KVM: arm64: nv: Add SW walker for AT S1 emulation
KVM: arm64: nv: Make ps_to_output_size() generally available
KVM: arm64: nv: Add emulation of AT S12E{0,1}{R,W}
KVM: arm64: nv: Add basic emulation of AT S1E2{R,W}
KVM: arm64: nv: Add basic emulation of AT S1E1{R,W}P
KVM: arm64: nv: Add basic emulation of AT S1E{0,1}{R,W}
KVM: arm64: nv: Honor absence of FEAT_PAN2
KVM: arm64: nv: Turn upper_attr for S2 walk into the full descriptor
KVM: arm64: nv: Enforce S2 alignment when contiguous bit is set
arm64: Add ESR_ELx_FSC_ADDRSZ_L() helper
arm64: Add system register encoding for PSTATE.PAN
arm64: Add PAR_EL1 field description
arm64: Add missing APTable and TCR_ELx.HPD masks
KVM: arm64: Make kvm_at() take an OP_AT_*
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/nested.c
|
|
* kvm-arm64/vgic-sre-traps:
: .
: Fix the multiple of cases where KVM/arm64 doesn't correctly
: handle the guest trying to use a GICv3 that isn't advertised.
:
: From the cover letter:
:
: "It recently appeared that, when running on a GICv3-equipped platform
: (which is what non-ancient arm64 HW has), *not* configuring a GICv3
: for the guest could result in less than desirable outcomes.
:
: We have multiple issues to fix:
:
: - for registers that *always* trap (the SGI registers) or that *may*
: trap (the SRE register), we need to check whether a GICv3 has been
: instantiated before acting upon the trap.
:
: - for registers that only conditionally trap, we must actively trap
: them even in the absence of a GICv3 being instantiated, and handle
: those traps accordingly.
:
: - finally, ID registers must reflect the absence of a GICv3, so that
: we are consistent.
:
: This series goes through all these requirements. The main complexity
: here is to apply a GICv3 configuration on the host in the absence of a
: GICv3 in the guest. This is pretty hackish, but I don't have a much
: better solution so far.
:
: As part of making wider use of of the trap bits, we fully define the
: trap routing as per the architecture, something that we eventually
: need for NV anyway."
: .
KVM: arm64: selftests: Cope with lack of GICv3 in set_id_regs
KVM: arm64: Add selftest checking how the absence of GICv3 is handled
KVM: arm64: Unify UNDEF injection helpers
KVM: arm64: Make most GICv3 accesses UNDEF if they trap
KVM: arm64: Honor guest requested traps in GICv3 emulation
KVM: arm64: Add trap routing information for ICH_HCR_EL2
KVM: arm64: Add ICH_HCR_EL2 to the vcpu state
KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is presented to the guest
KVM: arm64: Add helper for last ditch idreg adjustments
KVM: arm64: Force GICv3 trap activation when no irqchip is configured on VHE
KVM: arm64: Force SRE traps when SRE access is not enabled
KVM: arm64: Move GICv3 trap configuration to kvm_calculate_traps()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/fpmr:
: .
: Add FP8 support to the KVM/arm64 floating point handling.
:
: This includes new ID registers (ID_AA64PFR2_EL1 ID_AA64FPFR0_EL1)
: being made visible to guests, as well as a new confrol register
: (FPMR) which gets context-switched.
: .
KVM: arm64: Expose ID_AA64PFR2_EL1 to userspace and guests
KVM: arm64: Enable FP8 support when available and configured
KVM: arm64: Expose ID_AA64FPFR0_EL1 as a writable ID reg
KVM: arm64: Honor trap routing for FPMR
KVM: arm64: Add save/restore support for FPMR
KVM: arm64: Move FPMR into the sysreg array
KVM: arm64: Add predicate for FPMR support in a VM
KVM: arm64: Move SVCR into the sysreg array
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
While arch/*/mem/ptdump handles the kernel pagetable dumping code,
introduce KVM/ptdump to show the guest stage-2 pagetables. The
separation is necessary because most of the definitions from the
stage-2 pagetable reside in the KVM path and we will be invoking
functionality specific to KVM. Introduce the PTDUMP_STAGE2_DEBUGFS config.
When a guest is created, register a new file entry under the guest
debugfs dir which allows userspace to show the contents of the guest
stage-2 pagetables when accessed.
[maz: moved function prototypes from kvm_host.h to kvm_mmu.h]
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20240909124721.1672199-6-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Rename the attributes description array to allow the parsing method
to use the description from a local context. To be able to do this,
store a pointer to the description array in the state structure. This
will allow for the later introduced callers (stage_2 ptdump) to specify
their own page table description format to the ptdump parser.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240909124721.1672199-4-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Reuse the descriptor parsing functionality to keep the same output format
as the original ptdump code. In order for this to happen, move the state
tracking objects into a common header.
[maz: Fixed note_page() stub as suggested by Will]
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240909124721.1672199-3-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add explicit casting to prevent expantion of 32th bit of
u32 into highest half of u64 in several places.
For example, in inject_abt64:
ESR_ELx_EC_DABT_LOW << ESR_ELx_EC_SHIFT = 0x24 << 26.
This operation's result is int with 1 in 32th bit.
While casting this value into u64 (esr is u64) 1
fills 32 highest bits.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: <stable@vger.kernel.org>
Fixes: aa8eff9bfbd5 ("arm64: KVM: fault injection into a guest")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/stable/20240910085016.32120-1-abelova%40astralinux.ru
Link: https://lore.kernel.org/r/20240910085016.32120-1-abelova@astralinux.ru
Signed-off-by: Will Deacon <will@kernel.org>
|
|
FEAT_PAN3 is present if FEAT_S1POE is, this WARN() was to represent that.
However execute_only_pkey() is always called by mmap(), even on a CPU without
POE support.
Rather than making the WARN() conditional, just delete it.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/linux-arm-kernel/CA+G9fYvarKEPN3u1Ogw2pcw4h6r3OMzg+5qJpYkAXRunAEF_0Q@mail.gmail.com/
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240910105004.706981-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
