summaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)Author
2023-12-14arm64: dts: imx93: Fix the micfil clock-names entriesFabio Estevam
fsl,micfil.yaml defines the clock-names in the following sequence: clock-names: items: - const: ipg_clk - const: ipg_clk_app - const: pll8k - const: pll11k - const: clkext3 minItems: 2 imx93.dtsi currently misses the 'pll11k' entry and jump to 'clkext3'. This leads to the following dt-schema warning: imx93-11x11-evk.dtb: micfil@44520000: clock-names:3: 'pll11k' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,micfil.yaml# Fix the warning by describing the clocks up to 'pll8k' as 'clkext3' is assigned to a dummy clock. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13arm64: dts: freescale: add fsl-lx2160a-mblx2160a boardGregor Herburger
Add the different serdes configurations as overlays. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13arm64: dts: freescale: imx93: add i3c1 and i3c2Frank Li
Add I3C1 and I3C2. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13arm64: dts: ls1012a: Remove big-endian from thermalFabio Estevam
Per qoriq-thermal.yaml, 'big-endian' is not a valid property. When the 'little-endian' property is absent, the default is big endian. Remove it to fix the following schema warning: tmu@1f00000: 'big-endian' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mq-phanbell: make dts use gpio-fan matrix instead of arrayDavid Heidelberg
No functional changes. Adjust to comply with dt-schema requirements and make possible to validate values. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: verdin-imx8mp: add support to mallow boardJoao Paulo Goncalves
Add Toradex Verdin IMX8MP Mallow carrier board support. Mallow is a low-cost carrier board in the Verdin family with a small form factor and build for volume production making it ideal for industrial and embedded applications. https://www.toradex.com/products/carrier-board/mallow-carrier-board Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: verdin-imx8mm: add support to mallow boardJoao Paulo Goncalves
Add Toradex Verdin IMX8MM Mallow carrier board support. Mallow is a low-cost carrier board in the Verdin family with a small form factor and build for volume production making it ideal for industrial and embedded applications. https://www.toradex.com/products/carrier-board/mallow-carrier-board Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-venice-gw7: Adjust PCI Ethernet nodesFabio Estevam
As per Rob Herring's feedback: "The ethernet device should have a node name of 'ethernet'. The 'pcie' node name and 'device_type = "pci"' is for PCI buses/bridges only." Do it as suggested. Fixes: d61c5068729a ("arm64: dts: imx8mm-venice-gw7: Fix pci sub-nodes") Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm: Slow default video_pll1 clock rateAdam Ford
Since commit 8208181fe536 ("clk: imx: composite-8m: Add imx8m_divider_determine_rate") the lcdif controller has had the ability to set the lcdif_pixel rate which propagates up the tree and sets the video_pll1 rate automatically. By setting this value low, it will force the recalculation of video_pll1 to the lowest rate needed by lcdif instead of dividing a larger clock down to the desired clock speed. This has the advantage of being able to lower the video_pll1 rate from 594MHz to 148.5MHz when operating at 1080p. It can go even lower when operating at lower resolutions and refresh rates. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm: Remove video_pll1 clock rate from clk nodeAdam Ford
There are two clock-rate assignments for video_pll1, and the only one it should really have belongs inside the lcdif node, since it's the only consumer of this clock. Remove it from the clk node. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm: Simplify mipi_dsi clocksAdam Ford
The device tree clock structure for the mipi_dsi is unnecessarily redundant. The default clock parent of IMX8MM_CLK_DSI_PHY_REF is already IMX8MM_CLK_24M, so there is no need to set the parent-child relationship between them. The default clock rates for IMX8MM_SYS_PLL1_266M and IMX8MM_CLK_24M are already defined to be 266MHz and 24MHz respectively, so there is no need to define those clock rates. On i.MX8M[MNP] the samsung,pll-clock-frequency is not necessary, because the driver will read it from sclk_mipi which is also already set to 24MHz making it also redundant. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: minor whitespace cleanup around '='Krzysztof Kozlowski
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8dxl-ss-ddr: change ddr_pmu0 compatibleXu Yang
i.MX8DXL's ddr pmu has port/channel filter capabilities, but it still is compatible with "fsl,imx8-ddr-pmu". This will change the compatible. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: tqma8mpql: Remove invalid/unused propertyAlexander Stein
'dr_mode' is part of the USB DWC3 core, not the glue layer. Remove the property from glue layer. Fixes the dtbs_check warning: arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dtb: usb@32f10108: 'dr_mode' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8-ss-audio: Remove unexistent'shared-interrupt'Fabio Estevam
The 'shared-interrupt' property is not documented nor used anywhere. Remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx93: Remove unexistent 'shared-interrupt'Fabio Estevam
The 'shared-interrupt' property is not documented nor used anywhere. Remove it. This fixes the following schema warning: imx93-11x11-evk.dtb: dma-controller@42000000: Unevaluated properties are not allowed ('shared-interrupt' was unexpected) from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8qxp-mek: Fix gpio-sbu-mux compatibleFabio Estevam
Per gpio-sbu-mux.yaml, the compatible entry is incomplete. The imx8qxp-mek board uses a CBDTU02043, so complete the gpio-sbu-mux compatible accordingly. This fixes the following schema warning: imx8qxp-mek.dtb: gpio-sbu-mux: compatible:0: 'gpio-sbu-mux' is not one of ['onnn,fsusb43l10x', 'pericom,pi3usb102'] from schema $id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mp-debix-model-a: Use phy-modeFabio Estevam
The property 'phy-connection-type' can be used to describe the interface type between the Ethernet device and the Ethernet PHY device. However, snps,dwmac.yaml gives the following warning: imx8mp-debix-model-a.dtb: ethernet@30bf0000: 'phy-mode' is a required property from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# To avoid the warning, switch to the more commonly used, 'phy-mode' property instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-nitrogen-r2: Fix I2C mux subnode nameFabio Estevam
Per i2c-mux-pca954x.yaml, the I2C subnodes should follow the 'i2c@' format. Change it to fix the following schema warning: imx8mm-nitrogen-r2.dtb: i2c-mux@70: Unevaluated properties are not allowed ('i2c3@0' was unexpected) from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8dxl-ss-conn: Fix Ethernet interrupt-names orderFabio Estevam
Per snps,dwmac.yaml, the interrupt-names entries should be in the following order: "macirq", "eth_wake_irq"; Change it to fix the following schema warnings. imx8dxl-evk.dtb: ethernet@5b050000: interrupt-names:0: 'macirq' was expected from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# imx8dxl-evk.dtb: ethernet@5b050000: interrupt-names:1: 'macirq' is not one of ['eth_wake_irq', 'eth_lpi'] from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-emcon-avari: Fix gpio-cellsFabio Estevam
Per nxp,pcf8575.yaml, #gpio-cells should be 2. Change it to fix the following schema warning: imx8mm-emcon-avari.dtb: gpio@3a: #gpio-cells:0:0: 2 was expected from schema $id: http://devicetree.org/schemas/gpio/nxp,pcf8575.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8qm-ss-dma: Pass lpuart dma-namesFabio Estevam
Per fsl-lpuart.yaml, when the 'dmas' property is used 'dma-names' should also be present. Pass the lpuart 'dma-names' property to fix the following schema warnings: imx8dxl-evk.dtb: serial@5a060000: dma-names:0: 'rx' was expected from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# imx8dxl-evk.dtb: serial@5a060000: dma-names:1: 'tx' was expected from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# imx8dxl-evk.dtb: serial@5a060000: Unevaluated properties are not allowed ('dma-names' was unexpected) from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: Add SKOV IMX8MP CPU revB boardOleksij Rempel
Add Skov i.MX8MP based climate controller. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mn-var-som-symphony: add vcc supply for PCA9534Hugo Villeneuve
The following warning is shown when probing device: pca953x 1-0020: supply vcc not found, using dummy regulator Define a new fixed 3.3v regulator for carrier board peripherals, enabled by mosfet switch Q2 after the SOM_3V3 supply rises (no software control). Add this new regulator as vcc supply to the PCA9534 to silence the warning. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: introduce rve-gateway boardHugo Villeneuve
The RVE gateway board is based on a Variscite VAR-SOM-NANO, with a NXP MX8MN nano CPU. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: debix-som-a-bmb-08: Add CSI Power RegulatorsKieran Bingham
Provide the 1.8 and 3.3 volt regulators that are utilised on the Debix SOM BMB-08 base board. Facilitate this by also supplying the pin control used to enable the regulators on the second MIPI CSI port. Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8-apalis: add can power-up delay on ixora boardAndrejs Cainikovs
Newer variants of Ixora boards require a power-up delay when powering up the CAN transceiver of up to 1ms. Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mn-var-som: add fixed 3.3V regulator for EEPROMHugo Villeneuve
When the EEPROM is probed, we have this warning: at24 0-0052: supply vcc not found, using dummy regulator Add fixed 3.3v regulator to silence the warning. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-venice-gw7: Fix pci sub-nodesFabio Estevam
Several schema warnings are seen when running: make dtbs_check DT_SCHEMA_FILES=pci-bus.yaml Fix them. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mp: Disable dsp reserved memory by defaultAlexander Stein
Even if the 'dsp' node is disabled the memory intended to be used by the DSP is reserved. This limits the memory range suitable for CMA allocation. Thus disable the dsp_reserved node. DSP users need to enable it in parallel to the 'dsp' node. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mp: Add NPU NodeAdam Ford
The NPU is based on the Vivante GC8000 and its power-domain is controlled my pgc_mlmix. Since the power-domain uses some of these clocks, setup the clock parent and rates inside the power-domain, and add the NPU node. The data sheet states the CLK_ML_AHB should be 300MHz for nominal, but 800MHz clock will divide down to 266 instead. Boards which operate in over-drive mode should update the clocks on their boards accordingly. When the driver loads, the NPU numerates as: etnaviv-gpu 38500000.npu: model: GC8000, revision: 8002 Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: debix-som: Add heartbeat LEDKieran Bingham
Map the 'RUN' LED present on the Debix-SOM as a heartbeat. Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: Add dual-channel LVDS overlay for TQMa8MPxLAlexander Stein
This adds an overlay for the supported LVDS display AUO G133HAN01. Configure the video PLL frequency to exactly match typical pixel clock of 141.200 MHz. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mp-venice-gw74xx: remove unecessary propreties in tpm nodeTim Harvey
Remove unnecessary #address-cells and #size-cells from tpm node. Fixes: 531936b218d8 ("arm64: dts: imx8mp-venice-gw74xx: update to revB PCB") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mp-venice-gw72xx: add TPM deviceTim Harvey
Add the TPM device found on the GW72xx revision F PCB. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mm-venice-gw72xx: add TPM deviceTim Harvey
Add the TPM device found on the GW72xx revision F PCB. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93: update anatop nodePeng Fan
The anatop module produces PLL and OSC for Clock Controller Module. Since the binding doc has been updated to clock-controller for this module, Let's also update the device tree node. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93-11x11-evk: add 12 ms delay to make sure the VDD_SD power offHaibo Chen
To support SD3.0 mode, according to the SD spec, a clean power off for the VDD_SD is keep the VDD_SD lower than 0.5V for at least 1ms. On imx93 board, gate off the VDD_SD, it will cost about 10ms to see the voltage change from 3.3v to 0.5v. So at least need to dealy 11ms to make sure a clean power off and power on. Here add 12ms dealy. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93: change tuning start to get a large scan range for ↵Haibo Chen
standard tuning For original setting, the start point is 20, after the SION setting, ERR052021 can be workaround, but start point from 20 is too large, especially for the LD 133MHz case. Set the tuning start point as 1, tuning step as 2, so that, for the 40 times tuning logic, it can cover 1~81, its large and safe enough for all different devices like eMMC/SD/SDIO. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93-11x11-evk: set SION for cmd and data pad of USDHCHaibo Chen
imx93 pad integrate has one issue, refer to ERR052021: ERR052021 uSDHC: Sometimes uSDHC does not work under VDD_SOC low drive mode and nominal mode Description: uSDHC PADs have one integration issue. When CMD/DATA lines direction change from output to input, uSDHC controller begin sampling, the integration issue will make input enable signal from uSDHC propagated to the PAD with a long delay, thus the new input value on the pad comes to uSDHC lately. The uSDHC sampled the old input value and the sampling result is wrong. Workaround: Set uSDHC CMD/DATA PADs iomux register SION bit to 1, then PADs will propagate input to uSDHC with no delay, so correct value is sampled. This issue will wrongly trigger the start bit when sample the USDHC command response, cause the USDHC trigger command CRC/index/endbit error, which will finally impact the tuning pass window, espically will impact the standard tuning logic, and can't find a correct delay cell to get the best timing. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mp: Describe M24C32-D write-lockable page in DH i.MX8MP DHCOM DTMarek Vasut
The i.MX8MP DHCOM SoM production rev.200 is populated with M24C32-D EEPROMs which have Additional Write lockable page at separate I2C address. Describe the page in DT to make it available. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mp-beacon-kit: Enable DSI to HDMI BridgeAdam Ford
The baseboard of the Beacon i.MX8M Plus development kit has an ADV7535 DSI to HDMI bridge capable of stereo sound. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mm: Add CCM interruptsAlexander Stein
Add both CCM interrupts as mentioned in RM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mn: Add CCM interruptsAlexander Stein
Add both CCM interrupts as mentioned in RM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mp: Add CCM interruptsAlexander Stein
Add both CCM interrupts as mentioned in RM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: freescale: add initial device tree for MBa93xxCA starter kitAlexander Stein
This adds support for TQMa93xx module and MBa93xxCA starterkit mainboard. TQMa93xx is a SOM using i.MX93 SOC. The SOM features PMIC, RAM, e-MMC and some optional peripherals like SPI-NOR, RTC, EEPROM, gyroscope and secure element. TQMa93xxLA is a solder on type SOM and can be used on MBa93XXCA using an adapter. TQMa93xxCA is a feature compatible, socketable type SOM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: freescale: tqma9352-mba93xxla: add 'chassis-type' propertyAlexander Stein
Add the chassis-type property to tqma9352-mba93xxla. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93: Configure clock rate for audio PLLChancel Liu
Configure clock rate for audio PLL. There's one audio PLL on i.MX93. It is used as parent clock for clocks that are multiple of 8kHz. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93: Add audio device nodesChancel Liu
Add audio devices nodes including SAI, MICFIL, XCVR and MQS. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-10Merge tag 'probes-fixes-v6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Documentation update: Add a note about argument and return value fetching is the best effort because it depends on the type. - objpool: Fix to make internal global variables static in test_objpool.c. - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the same prototypes in asm/kprobes.h for some architectures, but some of them are missing the prototype and it causes a warning. So move the prototype into linux/kprobes.h. - tracing: Fix to check the tracepoint event and return event at parsing stage. The tracepoint event doesn't support %return but if $retval exists, it will be converted to %return silently. This finds that case and rejects it. - tracing: Fix the order of the descriptions about the parameters of __kprobe_event_gen_cmd_start() to be consistent with the argument list of the function. * tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Fix the order of argument descriptions tracing: fprobe-event: Fix to check tracepoint event and return kprobes: unify kprobes_exceptions_nofify() prototypes lib: test_objpool: make global variables static Documentation: tracing: Add a note about argument and retval access
generated by cgit (git 2.34.1) at 2025-04-16 16:28:48 +0000