summaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)Author
2020-03-25Merge tag 'v5.6-next-dts64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt2712: - add real time clock node mt8173: - mark arch timer invalid in suspend mt8183: - add CPU idle states - add watchdog node - add dynamic power coefficient and cooling cells for all CPUs mt8516: - add basic support for the SoC - add basic support for the pumpkin board * tag 'v5.6-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: add RTC nodes for MT2712 arm64: dts: mediatek: add pumpkin board dts arm64: dts: mediatek: add dtsi for MT8516 arm64: dts: mt8183: Add #cooling-cells to CPU nodes arm64: dts: mt8183: add/update dynamic power coefficients arm64: dts: mediatek: rename scpsys nodes to power-controller amr64: dts: mt8183: Add watchdog node arm64: dts: mt8173: add arm,no-tick-in-suspend in timer arm64: dts: mt8183: Enable CPU idle-states Link: https://lore.kernel.org/r/c512b5cb-e639-1429-64db-9c1a53378c49@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'ti-k3-soc-for-v5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC family changes for v5.7 - Add missing clocks to dwc3 nodes on am65x (fixes USB) - Add DMA entries for main_spi0 on am65x - Add phy-gmii-sel nodes for both am65x and j721e (towards ethernet support) - Add DMA entries for ADC for both am65x and j721e - Add MCU system control module on j721e (needed by phy-gmii-sel) * tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes Link: https://lore.kernel.org/r/4b6b7804-4bcb-07ba-5e76-6a411e1f457f@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'socfpga_dts_update_for_v5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.7 - Increase NAND boot partition for Arria10 - Increase QSPI partition for Stratix10 and Agilex * tag 'socfpga_dts_update_for_v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: increase the QSPI reg address for Stratix10 and Agilex ARM: dts: socfpga: arria10: Increase boot partition size for NAND Link: https://lore.kernel.org/r/20200318145957.30338-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'imx-dt64-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 DTS update for 5.7: - New support for Kontron LS1028A based boards and NXP i.MX8MP EVK. - Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board. - Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board. - Add SNVS clock description to pwrkey device for i.MX8 SoCs. - A number of updates on librem5-devkit board to add audio, proximity sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD devices as well. - A series of patches from Anson Huang to update i.MX8 EVK boards for support of I2C PCA6416, thermal, GPIO LED, OPP table etc. - Add PCIe device nodes for LX2160A and LS1028A SoC. - Add FSPI deivce support for LX2160A evaluation boards. - Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board. - Other small and random updates on LS1028A and i.MX8 support. * tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits) arm64: dts: ls1028a: disable the felix switch by default arm64: dts: imx8mp: Add snvs clock to powerkey arm64: dts: imx8mn: Add snvs clock to powerkey arm64: dts: ls1028a: Add PCIe controller DT nodes arm64: dts: ls1028a: sl28: add support for variant 2 arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS arm64: dts: ls1028a: sl28: fix on-board EEPROMS arm64: dts: freescale: sl28: add SPI flash arm64: dts: imx8m: fix aips dts node arm64: dts: imx8mn: Add CPU thermal zone support arm64: dts: imx8mm: Add thermal zone support arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration arm64: dts: enable fspi in imx8mm dts arm64: dts: imx8mn: align name for crypto child nodes arm64: dts: lx2160aqds: Add FSPI node properties arm64: dts: lx2160ardb: Update FSPI node properties arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support arm64: dts: layerscape: add iommu-map property to pci nodes arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus arm64: dts: imx8mp-evk: Add i2c3 support ... Link: https://lore.kernel.org/r/20200318051918.32579-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'uniphier-dt64-v5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM64 SoC DT updates for v5.7 - Rename nodes to avoid dt-schema warnings - Enable SPI for PXs3 reference board - Enable thermal monitor for PXs3 SoC - Fix clock and reset of SPI nodes * tag 'uniphier-dt64-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: Set SCSSI clock and reset IDs for each channel arm64: dts: uniphier: Add nodes of thermal monitor and thermal zone for PXs3 arm64: dts: uniphier: Enable spi node for PXs3 reference board arm64: dts: uniphier: rename NAND node names to follow json-schema arm64: dts: uniphier: rename aidet node names to follow json-schema arm64: dts: uniphier: change SD/eMMC node names to follow json-schema Link: https://lore.kernel.org/r/CAK7LNASMD-zqNfG02WhU1LeAJevnjBv=oT2N_7y6C8w7kryotQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'amlogic-dt64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.7 - sound, bluetooth, thermal updates - A1: add secure power domain nodes - misc. cleanups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add thermal zones to meson gx devices arm64: dts: meson: khadas-vim3: move model to g12b-khadas-vim3 dtsi arm64: dts: meson-g12b: fix N2/VIM3 audio card model names arm64: dts: meson-gxbb-vega-s95: fix bluetooth node arm64: dts: meson-gxl-s905x-p212: add bluetooth nodes arm64: dts: meson-gxbb-odroid-c2: add rc-odroid ir keymap arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson: sei510: fix sound card codec node arm64: dts: meson: s400: fix sound card codec nodes arm64: dts: meson: add pdm reset line arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller arm64: dts: amlogic: add rc-videostrong-kii-pro keymap arm64: dts: meson: a1: add secure power domain controller Link: https://lore.kernel.org/r/7hlfo0ugnj.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'v5.7-rockchip-dts64-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Support for the rk3399-based Pinebook Pro, eDP support and power-tree for the rk3399 evaluation board, a big number of fixes for issues found by checking against the new yaml dt-bindings. And on the smaller side, fixes for network transfers, the mute gpio on rk3328 gets actually described and one lvds fix on the px30 and the rk3399-hugsun board gets IR and power led. * tag 'v5.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits) arm64: dts: rockchip: Add Hugsun X99 power led arm64: dts: rockchip: Add Hugsun X99 IR receiver arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodes arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator arm64: dts: add bus to rockchip amba nodenames arm64: dts: rockchip: replace clock-freq-min-max by max-frequency arm64: dts: rockchip: fix vqmmc-supply property name for rk3399 puma arm64: dts: remove no-emmc from mmc node for Rockchip PX5 EVB arm64: dts: rockchip: remove rockchip,grf from vop nodes for px30 arm64: dts: rockchip: remove max-freq from &spi1 node for Hugsun X99 arm64: dts: rockchip: fix compatible property for rk3399-evb arm64: dts: rockchip: Add initial support for Pinebook Pro dt-bindings: Add doc for Pine64 Pinebook Pro arm64: dts: rockchip: Enable eDP display on rk3399 evb arm64: dts: rockchip: remove enable-gpio of backlight on rk3399 evb arm64: dts: rockchip: Add pmic dt tree for rk3399 evb arm64: dts: rockchip: remove dvs2 pinctrl for pmic on rk3399 evb arm64: dts: rockchip: fix px30 lvds ports arm64: dts: rockchip: Add txpbl node for RK3399/RK3328 ... Link: https://lore.kernel.org/r/27799037.pT45f1LVdF@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix deadlock in bpf_send_signal() from Yonghong Song. 2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan. 3) Add missing locking in iwlwifi mvm code, from Avraham Stern. 4) Fix MSG_WAITALL handling in rxrpc, from David Howells. 5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong Wang. 6) Fix producer race condition in AF_PACKET, from Willem de Bruijn. 7) cls_route removes the wrong filter during change operations, from Cong Wang. 8) Reject unrecognized request flags in ethtool netlink code, from Michal Kubecek. 9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from Doug Berger. 10) Don't leak ct zone template in act_ct during replace, from Paul Blakey. 11) Fix flushing of offloaded netfilter flowtable flows, also from Paul Blakey. 12) Fix throughput drop during tx backpressure in cxgb4, from Rahul Lakkireddy. 13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric Dumazet. 14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well, also from Eric Dumazet. 15) Restrict macsec to ethernet devices, from Willem de Bruijn. 16) Fix reference leak in some ethtool *_SET handlers, from Michal Kubecek. 17) Fix accidental disabling of MSI for some r8169 chips, from Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits) net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build net: ena: Add PCI shutdown handler to allow safe kexec selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED selftests/net: add missing tests to Makefile r8169: re-enable MSI on RTL8168c net: phy: mdio-bcm-unimac: Fix clock handling cxgb4/ptp: pass the sign of offset delta in FW CMD net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop net: cbs: Fix software cbs to consider packet sending time net/mlx5e: Do not recover from a non-fatal syndrome net/mlx5e: Fix ICOSQ recovery flow with Striding RQ net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset net/mlx5e: Enhance ICOSQ WQE info fields net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure selftests: netfilter: add nfqueue test case netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress netfilter: nft_fwd_netdev: validate family and chain type netfilter: nft_set_rbtree: Detect partial overlaps on insertion netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start() netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion ...
2020-03-25Merge tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu into arm/dtArnd Bergmann
mvebu dt64 for 5.7 (part 1) Improve network support on two Armada 8040 based board: Clearfog GT 8 and Macchiatobin. Add ethernet alias on Espressobin for U-Boot support. Fix various dt compilation issue or warning. * tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: Fix cpu compatible for AP807-quad arm64: dts: marvell: fix non-existed cpu referrence in armada-ap806-dual.dtsi arm64: dts: marvell: build ESPRESSObin variants arm64: dts: marvell: espressobin: indicate dts version arm64: dts: marvell: espressobin: add ethernet alias arm64: dts: mcbin: support 2W SFP modules arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay Link: https://lore.kernel.org/r/87h7yqx7w2.fsf@FE-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tegra-for-5.7-arm64-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.7-rc1 These changes add support for the XUSB pad controller, as well as the XUSB controller on Tegra194. Furthermore, USB device mode is supported across Tegra210 and Tegra186 boards. PCIe endpoint mode support is added for the Jetson AGX Xavier platform. Various minor fixes eliminate warnings on boot related to missing power supplies for some devices. * tag 'tegra-for-5.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Add support for PCIe endpoint mode in P2972-0000 platform arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194 arm64: tegra: Add ethernet alias on Jetson TX1 arm64: tegra: Populate LP8557 backlight regulator arm64: tegra: Fix Tegra186 SOR supply arm64: tegra: Add EEPROM supplies arm64: tegra: Enable I2C controller for EEPROM arm64: tegra: smaug: Change clk_out_2 provider to PMC arm64: tegra: Add clock-cells property to Tegra PMC node arm64: tegra: Enable XUDC node on Jetson Nano arm64: tegra: Update OTG port entries for Jetson Nano arm64: tegra: Enable XUDC node on Jetson TX2 arm64: tegra: Add XUDC node for Tegra186 arm64: tegra: Enable XUDC on Jetson TX1 arm64: tegra: Add XUDC node for Tegra210 arm64: tegra: Update OTG port entries for Jetson TX2 arm64: tegra: Update OTG port entries for Jetson TX1 arm64: tegra: Enable XUSB host in P2972-0000 board arm64: tegra: Add XUSB and pad controller on Tegra194 arm64: tegra: Fix Tegra194 PCIe compatible string Link: https://lore.kernel.org/r/20200313165848.2915133-8-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'renesas-arm64-dt-for-v5.7-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.7 (take two) - Thermal support for R-Car M3-W+, - Support for the M3ULCB board with R-Car M3-W+, - CPUIdle support for R-Car M3-N and E3, - Display support for the HiHope RZ/G2M board, - A minor fix. * tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display arm64: dts: renesas: r8a77990: Add CPUIdle support for CA53 cores arm64: dts: renesas: r8a77965: Add CPUIdle support for CA57 cores arm64: dts: renesas: r8a77961: salvator-xs: Fix memory unit-address arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+ arm64: dts: renesas: r8a77961: Add thermal nodes Link: https://lore.kernel.org/r/20200313154304.1636-3-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'sunxi-dt-for-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner Device Tree Changes for v5.7 A fairly large set of changes for v5.7, including some new devices. SoC specific changes: - SPI on H6 SoC enabled - Thermal sensor on R40 SoC enabled - Deinterlace core hardware on A64 SoC enabled - Redundant assigned-clocks properties removed - required clock rates are now enforced by drivers - LVDS panel support on A20 SoC enabled - PMU compatible fixed for H5 and H6 SoCs - Thermal trip points added for A83T and H5 SoCs - (Image) Rotation core hardware on A83T and A64 SoCs enabled Device specific changes: - Pine64 PineTab and PinePhone added - Various cleanups and improvements for Pine64 PineBook - GPIO pin bank regulator supplies added for A64-OlinXino - eMMC enabled on Orange Pi 3 - PocketBook Touch Lux 3 added - Linutronix Testbox v2 added - Ethernet enabled on Orange Pi One Plus - HDMI enabled on H6-based Orange Pi boards * tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (46 commits) arm64: dts: allwinner: a64: add node for rotation core ARM: dts: sun8i: a83t: Add device node for rotation core arm64: dts: allwinner: a64: Fix display clock register range ARM: dts: sunxi: Fix DE2 clocks register range arm64: dts: allwinner: h6: orangepi: Enable HDMI arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet arm64: dts: allwinner: h6: Move ext. oscillator to board DTs arm64: dts: allwinner: Add initial support for Pine64 PinePhone dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings arm64: dts: sun50i-a64: Add i2c2 pins ARM: dts: sunxi: h3/h5: add r_pwm node arm64: allwinner: a64: enable LCD-related hardware for Pinebook ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps ARM: dts: sun8i-h3: Add thermal trip points/cooling maps arm64: dts: allwinner: h6: Fix PMU compatible arm64: dts: allwinner: h5: Fix PMU compatible ARM: dts: sun8i-a83t-tbs-a711: Drop superfluous dr_mode arm64: dts: sun50i-h5-orange-pi-pc2: Add CPUX voltage regulator ARM: dts: sun5i: Add PocketBook Touch Lux 3 support dt-bindings: arm: sunxi: Add PocketBook Touch Lux 3 ... Link: https://lore.kernel.org/r/20200313055459.GA19820@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25arm64: dts: specify console via command lineChunyan Zhang
The SPRD serial driver need to know which serial port would be used as console in an early period during initialization, otherwise console init would fail since we added this feature[1]. So this patch add console to command line via devicetree. [1] https://lore.kernel.org/lkml/20190826072929.7696-4-zhang.lyra@gmail.com/ Link: https://lore.kernel.org/r/20200311112120.30890-1-zhang.lyra@gmail.com Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'versatile-dts-v5.7-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt Versatile DTS updates for the v5.7 series take one: - Schema validation for the top level of all ARM reference designs: Integrator, Versatile, RealView, Juno. - Clean up some node names in the trees so they pass validation fine. - Drop the old text bindings. - A top level DMA ranges patch from Rob. * tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM/arm64: dts: Rename SMB bus to just bus dt-bindings: arm: Drop the non-YAML bindings dt-bindings: arm: Add Versatile Express and Juno YAML schema dt-bindings: arm: Add RealView YAML schema dt-bindings: arm: Add Versatile YAML schema dt-bindings: arm: Add Integrator YAML schema ARM: dts: RealView: Fix the name of the SoC node ARM: dts: Versatile: Use syscon as node name for IB2 ARM: dts: integratorap: Remove top level dma-ranges Link: https://lore.kernel.org/r/CACRpkdbbniYVnsE-pAmU2qCerswserNgEFtY48XQ+_K+DUNC9Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'renesas-arm64-dt-for-v5.7-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.7 - CryptoCell support for R-Car M3-W, M3-W+, M3-N, E3, and D3, - Miscellaneous fixes and improvements. * tag 'renesas-arm64-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: rzg2: Add reset control properties for display arm64: dts: renesas: rcar-gen3: Add reset control properties for display arm64: dts: renesas: Remove use of ARCH_R8A7795 arm64: dts: renesas: rcar-gen3: Add CCREE nodes arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps" arm: dts: renesas: r8a77980: Remove r8a77970 DU compatible Link: https://lore.kernel.org/r/20200226110221.19288-5-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'zynqmp-soc-for-v5.7' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
arm/soc arm64: soc: ZynqMP SoC changes for v5.7 - Change firmware dependency to be able to disable it * tag 'zynqmp-soc-for-v5.7' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: Make zynqmp_firmware driver optional include: linux: firmware: Correct config dependency of zynqmp_eemi_ops Link: https://lore.kernel.org/r/ecef6de5-8318-9f88-db8c-7c33fe44901f@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'arm-soc/for-5.7/soc-arm64' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/soc This pull request contains Broadcom ARM64 SoCs changes for 5.7, please pull the following: - Geert drops the non-existent HAVE_ARM_ARCH_TIMER symbol select for ARCH_BCM2835 * tag 'arm-soc/for-5.7/soc-arm64' of https://github.com/Broadcom/stblinux: arm64: bcm2835: Drop select of nonexistent HAVE_ARM_ARCH_TIMER Link: https://lore.kernel.org/r/20200311212012.9418-4-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'imx-defconfig-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/config i.MX defconfig changes for 5.7: - A seris from Li Yang to make defconfig useful for NXP LS family SoCs. Most drivers are built as module there, but those helping boot system with NFS are enabled built-in. - Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in defconfig. - Enable i.MX DRM driver support for multi_v7_defconfig. - Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig. * tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits) arm64: defconfig: Enable e1000 device arm64: defconfig: Enable PHY devices used on QorIQ boards arm64: defconfig: Enable RTC devices for QorIQ boards arm64: defconfig: Enable flash device drivers for QorIQ boards arm64: defconfig: Enable ARM Mali display driver arm64: defconfig: Enable QorIQ GPIO driver arm64: defconfig: Enable QorIQ IFC NAND controller driver arm64: defconfig: Enable ARM SBSA watchdog driver arm64: defconfig: Enable QorIQ cpufreq driver arm64: defconfig: Enable NXP/FSL SPI controller drivers arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch arm64: defconfig: Enable QorIQ DPAA2 drivers arm64: defconfig: Enable QorIQ DPAA1 drivers arm64: defconfig: Enable NXP flexcan driver arm64: defconfig: run through savedefconfig for ordering arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module arm64: defconfig: add i.MX system controller thermal support ARM: multi_v7_defconfig: enable drm imx support arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4 ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_AD7879 ... Link: https://lore.kernel.org/r/20200318051918.32579-6-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'qcom-arm64-defconfig-for-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/config Qualcomm ARM64 defconfig updates for v5.7 Enable SDM845 audio, display and gpu related configs and the Truly NT35597 panel driver, all relevant for various SDM845 based boards. Enable IPQ6018 clocks and pinctrl and the pmic vibrator driver for PM8916. * tag 'qcom-arm64-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable Qualcomm SDM845 audio configs arm64: defconfig: Enable Truly NT35597 WQXGA panel arm64: defconfig: Enable Qualcomm SDM845 display and gpu clocks arm64: defconfig: Enable qcom ipq6018 clock and pinctrl arm64: defconfig: Enable Qualcomm PM8XXX vibrator support Link: https://lore.kernel.org/r/20200318043856.GB470201@yoga Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'hisi-arm64-defconfig-for-5.7' of ↵Arnd Bergmann
git://github.com/hisilicon/linux-hisi into arm/config ARM64: hisilicon: defconfig updates for 5.7 - Enable MEGARAID_SAS to be able to boot from disk for the D06CS development board * tag 'hisi-arm64-defconfig-for-5.7' of git://github.com/hisilicon/linux-hisi: arm64: defconfig: Enable MEGARAID_SAS Link: https://lore.kernel.org/r/5E61F3C1.1080909@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'renesas-arm64-defconfig-for-v5.7-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/config Renesas ARM64 defconfig updates for v5.7 - Restore R-Car M3-W support, - Enable additional support for Renesas platforms. * tag 'renesas-arm64-defconfig-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: defconfig: Enable additional support for Renesas platforms arm64: defconfig: Replace ARCH_R8A7796 by ARCH_R8A77960 Link: https://lore.kernel.org/r/20200226110221.19288-4-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25arm64: dts: Fix leftover entry-methods for PSCILinus Walleij
These two device trees were either missed or added after the commit correcting the "entry-method" from "arm,psci" to just "psci" as per the binding. Link: https://lore.kernel.org/r/20200322115846.16265-1-linus.walleij@linaro.org Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25arm64: hibernate: Use bringup_hibernate_cpu()Qais Yousef
Use bringup_hibernate_cpu() instead of open coding it. [ tglx: Split out the core change ] Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200323135110.30522-9-qais.yousef@arm.com
2020-03-25arm64: Use reboot_cpu instead of hardconding it to 0Qais Yousef
Use `reboot_cpu` variable instead of hardcoding 0 as the reboot cpu in machine_shutdown(). Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200323135110.30522-8-qais.yousef@arm.com
2020-03-25arm64: Don't use disable_nonboot_cpus()Qais Yousef
disable_nonboot_cpus() is not safe to use when doing machine_down(), because it relies on freeze_secondary_cpus() which in turn is a suspend/resume related freeze and could abort if the logic detects any pending activities that can prevent finishing the offlining process. Beside disable_nonboot_cpus() is dependent on CONFIG_PM_SLEEP_SMP which is an othogonal config to rely on to ensure this function works correctly. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200323135110.30522-7-qais.yousef@arm.com
2020-03-25Merge branch 'for-next/kernel-ptrauth' into for-next/coreCatalin Marinas
* for-next/kernel-ptrauth: : Return address signing - in-kernel support arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH lkdtm: arm64: test kernel pointer authentication arm64: compile the kernel with ptrauth return address signing kconfig: Add support for 'as-option' arm64: suspend: restore the kernel ptrauth keys arm64: __show_regs: strip PAC from lr in printk arm64: unwind: strip PAC from kernel addresses arm64: mask PAC bits of __builtin_return_address arm64: initialize ptrauth keys for kernel booting task arm64: initialize and switch ptrauth kernel keys arm64: enable ptrauth earlier arm64: cpufeature: handle conflicts based on capability arm64: cpufeature: Move cpu capability helpers inside C file arm64: ptrauth: Add bootup/runtime flags for __cpu_setup arm64: install user ptrauth keys at kernel exit time arm64: rename ptrauth key structures to be user-specific arm64: cpufeature: add pointer auth meta-capabilities arm64: cpufeature: Fix meta-capability cpufeature check
2020-03-25Merge branch 'for-next/asm-cleanups' into for-next/coreCatalin Marinas
* for-next/asm-cleanups: : Various asm clean-ups (alignment, mov_q vs ldr, .idmap) arm64: move kimage_vaddr to .rodata arm64: use mov_q instead of literal ldr
2020-03-25Merge branch 'for-next/asm-annotations' into for-next/coreCatalin Marinas
* for-next/asm-annotations: : Modernise arm64 assembly annotations arm64: head: Convert install_el2_stub to SYM_INNER_LABEL arm64: Mark call_smc_arch_workaround_1 as __maybe_unused arm64: entry-ftrace.S: Fix missing argument for CONFIG_FUNCTION_GRAPH_TRACER=y arm64: vdso32: Convert to modern assembler annotations arm64: vdso: Convert to modern assembler annotations arm64: sdei: Annotate SDEI entry points using new style annotations arm64: kvm: Modernize __smccc_workaround_1_smc_start annotations arm64: kvm: Modernize annotation for __bp_harden_hyp_vecs arm64: kvm: Annotate assembly using modern annoations arm64: kernel: Convert to modern annotations for assembly data arm64: head: Annotate stext and preserve_boot_args as code arm64: head.S: Convert to modern annotations for assembly functions arm64: ftrace: Modernise annotation of return_to_handler arm64: ftrace: Correct annotation of ftrace_caller assembly arm64: entry-ftrace.S: Convert to modern annotations for assembly functions arm64: entry: Additional annotation conversions for entry.S arm64: entry: Annotate ret_from_fork as code arm64: entry: Annotate vector table and handlers as code arm64: crypto: Modernize names for AES function macros arm64: crypto: Modernize some extra assembly annotations
2020-03-25Merge branches 'for-next/memory-hotremove', 'for-next/arm_sdei', ↵Catalin Marinas
'for-next/amu', 'for-next/final-cap-helper', 'for-next/cpu_ops-cleanup', 'for-next/misc' and 'for-next/perf' into for-next/core * for-next/memory-hotremove: : Memory hot-remove support for arm64 arm64/mm: Enable memory hot remove arm64/mm: Hold memory hotplug lock while walking for kernel page table dump * for-next/arm_sdei: : SDEI: fix double locking on return from hibernate and clean-up firmware: arm_sdei: clean up sdei_event_create() firmware: arm_sdei: Use cpus_read_lock() to avoid races with cpuhp firmware: arm_sdei: fix possible double-lock on hibernate error path firmware: arm_sdei: fix double-lock on hibernate with shared events * for-next/amu: : ARMv8.4 Activity Monitors support clocksource/drivers/arm_arch_timer: validate arch_timer_rate arm64: use activity monitors for frequency invariance cpufreq: add function to get the hardware max frequency Documentation: arm64: document support for the AMU extension arm64/kvm: disable access to AMU registers from kvm guests arm64: trap to EL1 accesses to AMU counters from EL0 arm64: add support for the AMU extension v1 * for-next/final-cap-helper: : Introduce cpus_have_final_cap_helper(), migrate arm64 KVM to it arm64: kvm: hyp: use cpus_have_final_cap() arm64: cpufeature: add cpus_have_final_cap() * for-next/cpu_ops-cleanup: : cpu_ops[] access code clean-up arm64: Introduce get_cpu_ops() helper function arm64: Rename cpu_read_ops() to init_cpu_ops() arm64: Declare ACPI parking protocol CPU operation if needed * for-next/misc: : Various fixes and clean-ups arm64: define __alloc_zeroed_user_highpage arm64/kernel: Simplify __cpu_up() by bailing out early arm64: remove redundant blank for '=' operator arm64: kexec_file: Fixed code style. arm64: add blank after 'if' arm64: fix spelling mistake "ca not" -> "cannot" arm64: entry: unmask IRQ in el0_sp() arm64: efi: add efi-entry.o to targets instead of extra-$(CONFIG_EFI) arm64: csum: Optimise IPv6 header checksum arch/arm64: fix typo in a comment arm64: remove gratuitious/stray .ltorg stanzas arm64: Update comment for ASID() macro arm64: mm: convert cpu_do_switch_mm() to C arm64: fix NUMA Kconfig typos * for-next/perf: : arm64 perf updates arm64: perf: Add support for ARMv8.5-PMU 64-bit counters KVM: arm64: limit PMU version to PMUv3 for ARMv8.1 arm64: cpufeature: Extract capped perfmon fields arm64: perf: Clean up enable/disable calls perf: arm-ccn: Use scnprintf() for robustness arm64: perf: Support new DT compatibles arm64: perf: Refactor PMU init callbacks perf: arm_spe: Remove unnecessary zero check on 'nr_pages'
2020-03-25arm64: head: Convert install_el2_stub to SYM_INNER_LABELMark Brown
New assembly annotations have recently been introduced which aim to make the way we describe symbols in assembly more consistent. Recently the arm64 assembler was converted to use these but install_el2_stub was missed. Signed-off-by: Mark Brown <broonie@kernel.org> [catalin.marinas@arm.com: changed to SYM_L_LOCAL] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24arm64: Introduce get_cpu_ops() helper functionGavin Shan
This introduces get_cpu_ops() to return the CPU operations according to the given CPU index. For now, it simply returns the @cpu_ops[cpu] as before. Also, helper function __cpu_try_die() is introduced to be shared by cpu_die() and ipi_cpu_crash_stop(). So it shouldn't introduce any functional changes. Signed-off-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com>
2020-03-24arm64: Rename cpu_read_ops() to init_cpu_ops()Gavin Shan
This renames cpu_read_ops() to init_cpu_ops() as the function is only called in initialization phase. Also, we will introduce get_cpu_ops() in the subsequent patches, to retireve the CPU operation by the given CPU index. The usage of cpu_read_ops() and get_cpu_ops() are difficult to be distinguished from their names. Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-24arm64: Declare ACPI parking protocol CPU operation if neededGavin Shan
It's obvious we needn't declare the corresponding CPU operation when CONFIG_ARM64_ACPI_PARKING_PROTOCOL is disabled, even it doesn't cause any compiling warnings. Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-24KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIsMarc Zyngier
Just like for VLPIs, it is beneficial to avoid trapping on WFI when the vcpu is using the GICv4.1 SGIs. Add such a check to vcpu_clear_wfx_traps(). Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20200304203330.4967-23-maz@kernel.org
2020-03-24KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disableMarc Zyngier
Each time a Group-enable bit gets flipped, the state of these bits needs to be forwarded to the hardware. This is a pretty heavy handed operation, requiring all vcpus to reload their GICv4 configuration. It is thus implemented as a new request type. These enable bits are programmed into the HW by setting the VGrp{0,1}En fields of GICR_VPENDBASER when the vPEs are made resident again. Of course, we only support Group-1 for now... Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org
2020-03-24arm64: move kimage_vaddr to .rodataRemi Denis-Courmont
This datum is not referenced from .idmap.text: it does not need to be mapped in idmap. Lets move it to .rodata as it is never written to after early boot of the primary CPU. (Maybe .data.ro_after_init would be cleaner though?) Signed-off-by: Rémi Denis-Courmont <remi@remlab.net> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-24arm64: use mov_q instead of literal ldrRemi Denis-Courmont
In practice, this requires only 2 instructions, or even only 1 for the idmap_pg_dir size (with 4 or 64 KiB pages). Only the MAIR values needed more than 2 instructions and it was already converted to mov_q by 95b3f74bec203804658e17f86fe20755bb8abcb9. Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com>
2020-03-23Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a correctness bug in the ARM64 version of ChaCha for lib/crypto used by WireGuard" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm64/chacha - correctly walk through blocks
2020-03-23Merge 5.6-rc7 into tty-nextGreg Kroah-Hartman
We need the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21arm64: vdso32: Enable Clang CompilationVincenzo Frascino
Enable Clang Compilation for the vdso32 library. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200320145351.32292-27-vincenzo.frascino@arm.com
2020-03-21arm64: vdso32: Include common headers in the vdso libraryVincenzo Frascino
The vDSO library should only include the necessary headers required for a userspace library (UAPI and a minimal set of kernel headers). To make this possible it is necessary to isolate from the kernel headers the common parts that are strictly necessary to build the library. Refactor the vdso32 implementation to include common headers. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200320145351.32292-22-vincenzo.frascino@arm.com
2020-03-21arm64: vdso: Include common headers in the vdso libraryVincenzo Frascino
The vDSO library should only include the necessary headers required for a userspace library (UAPI and a minimal set of kernel headers). To make this possible it is necessary to isolate from the kernel headers the common parts that are strictly necessary to build the library. Refactor the vdso implementation to include common headers. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200320145351.32292-21-vincenzo.frascino@arm.com
2020-03-21arm64: Introduce asm/vdso/processor.hVincenzo Frascino
The vDSO library should only include the necessary headers required for a userspace library (UAPI and a minimal set of kernel headers). To make this possible it is necessary to isolate from the kernel headers the common parts that are strictly necessary to build the library. Introduce asm/vdso/processor.h to contain all the arm64 specific functions that are suitable for vDSO inclusion. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200320145351.32292-20-vincenzo.frascino@arm.com
2020-03-21arm64: vdso32: Code clean upVincenzo Frascino
The compat vdso library had some checks that are not anymore relevant. Remove the unused code from the compat vDSO library. Note: This patch is preparatory for a future one that will introduce asm/vdso/processor.h on arm64. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/lkml/20200317122220.30393-19-vincenzo.frascino@arm.com Link: https://lkml.kernel.org/r/20200320145351.32292-19-vincenzo.frascino@arm.com
2020-03-21arm64: Introduce asm/vdso/clocksource.hVincenzo Frascino
The vDSO library should only include the necessary headers required for a userspace library (UAPI and a minimal set of kernel headers). To make this possible it is necessary to isolate from the kernel headers the common parts that are strictly necessary to build the library. Introduce asm/vdso/clocksource.h to contain all the arm64 specific functions that are suitable for vDSO inclusion. This header will be required by a future patch that will generalize vdso/clocksource.h. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200320145351.32292-7-vincenzo.frascino@arm.com
2020-03-20Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Fix panic() when it occurs during secondary CPU startup - Fix "kpti=off" when KASLR is enabled - Fix howler in compat syscall table for vDSO clock_getres() fallback * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: compat: Fix syscall number of compat_clock_getres arm64: kpti: Fix "kpti=off" when KASLR is enabled arm64: smp: fix crash_smp_send_stop() behaviour arm64: smp: fix smp_send_stop() behaviour
2020-03-20arm64: Kconfig: verify binutils support for ARM64_PTR_AUTHNick Desaulniers
Clang relies on GNU as from binutils to assemble the Linux kernel, currently. A recent patch to enable the armv8.3-a extension for pointer authentication checked for compiler support of the relevant flags. Everything works with binutils 2.34+, but for older versions we observe assembler errors: /tmp/vgettimeofday-36a54b.s: Assembler messages: /tmp/vgettimeofday-36a54b.s:40: Error: unknown pseudo-op: `.cfi_negate_ra_state' When compiling with Clang, require the assembler to support .cfi_negate_ra_state directives, in order to support CONFIG_ARM64_PTR_AUTH. Link: https://github.com/ClangBuiltLinux/linux/issues/938 Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com>
2020-03-20arm64: alternative: fix build with clang integrated assemblerIlie Halip
Building an arm64 defconfig with clang's integrated assembler, this error occurs: <instantiation>:2:2: error: unrecognized instruction mnemonic _ASM_EXTABLE 9999b, 9f ^ arch/arm64/mm/cache.S:50:1: note: while in macro instantiation user_alt 9f, "dc cvau, x4", "dc civac, x4", 0 ^ While GNU as seems fine with case-sensitive macro instantiations, clang doesn't, so use the actual macro name (_asm_extable) as in the rest of the file. Also checked that the generated assembly matches the GCC output. Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Fixes: 290622efc76e ("arm64: fix "dc cvau" cache operation on errata-affected core") Link: https://github.com/ClangBuiltLinux/linux/issues/924 Signed-off-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-20crypto: arm/neon - memzero_explicit aes-cbc keyTorsten Duwe
At function exit, do not leave the expanded key in the rk struct which got allocated on the stack. Signed-off-by: Torsten Duwe <duwe@suse.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2024-06-18 15:26:46 +0000