| Age | Commit message (Collapse) | Author |
|---|
|
Bulk addition of all the FGT2 traps reported with EC == 0x18,
as described in the 2025-03 JSON drop.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Just like we allow sysreg ranges for Coarse Grained Trap descriptors,
allow them for Fine Grain Traps as well.
This comes with a warning that not all ranges are suitable for this
particular definition of ranges.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Just like the rest of the FGT registers, perform a switch of the
FGT2 equivalent. This avoids the host configuration leaking into
the guest...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Similarly to the FEAT_FGT registers, pick the correct FEAT_FGT2
register when a sysreg trap indicates they could be responsible
for the exception.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Just like the FEAT_FGT registers, treat the FGT2 variant the same
way. THis is a large update, but a fairly mechanical one.
The config dependencies are extracted from the 2025-03 JSON drop.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The FEAT_FGT2 registers are part of the VNCR page. Describe the
corresponding offsets and add them to the vcpu sysreg enumeration.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Similarly to other registers, describe which HCR_EL2 bit depends
on which feature, and use this to compute the RES0 status of these
bits.
An additional complexity stems from the status of some bits such
as E2H and RW, which do not had a RESx status, but still take
a fixed value due to implementation choices in KVM.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Similarly to other registers, describe which HCR_EL2 bit depends
on which feature, and use this to compute the RES0 status of these
bits.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to be able to write more compact (and easier to read) code,
let kvm_has_feat() and co take variable arguments. This enables
constructs such as:
#define FEAT_SME ID_AA64PFR1_EL1, SME, IMP
if (kvm_has_feat(kvm, FEAT_SME))
[...]
which is admitedly more readable.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Another benefit of mapping bits to features is that it becomes trivial
to define which bits should be handled as RES0.
Let's apply this principle to the guest's view of the FGT registers.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since we're (almost) feature complete, let's allow userspace to
request KVM_ARM_VCPU_EL2* by bumping KVM_VCPU_MAX_FEATURES up.
We also now advertise the features to userspace with new capabilities.
It's going to be great...
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250514103501.2225951-17-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Cleanly, this code cannot trigger, since we filter this from the
caller. Drop it.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-16-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we have to handle TLBI S1E2 in the core code, plumb the
sysinsn dispatch code into it, so that these instructions don't
just UNDEF anymore.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-15-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A TLBI by VA for S1 must take effect on our pseudo-TLB for VNCR
and potentially knock the fixmap mapping. Even worse, that TLBI
must be able to work cross-vcpu.
For that, we track on a per-VM basis if any VNCR is mapped, using
an atomic counter. Whenever a TLBI S1E2 occurs and that this counter
is non-zero, we take the long road all the way back to the core code.
There, we iterate over all vcpus and check whether this particular
invalidation has any damaging effect. If it does, we nuke the pseudo
TLB and the corresponding fixmap.
Yes, this is costly.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-14-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since we now have a way to map the guest's VNCR_EL2 on the host,
we can point the host's VNCR_EL2 to it and go full circle!
Note that we unconditionally assign the fixmap to VNCR_EL2,
irrespective of the guest's version being mapped or not. We want
to take a fault on first access, so the fixmap either contains
something guranteed to be either invalid or a guest mapping.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-13-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
During an invalidation triggered by an MMU notifier, we need to
make sure we can drop the *host* mapping that would have been
translated by the stage-2 mapping being invalidated.
For the moment, the invalidation is pretty brutal, as we nuke
the full IPA range, and therefore any VNCR_EL2 mapping.
At some point, we'll be more light-weight, and the code is able
to deal with something more targetted.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we can handle faults triggered through VNCR_EL2, we need
to map the corresponding page at EL2. But where, you'll ask?
Since each CPU in the system can run a vcpu, we need a per-CPU
mapping. For that, we carve a NR_CPUS range in the fixmap, giving
us a per-CPU va at which to map the guest's VNCR's page.
The mapping occurs both on vcpu load and on the back of a fault,
both generating a request that will take care of the mapping.
That mapping will also get dropped on vcpu put.
Yes, this is a bit heavy handed, but it is simple. Eventually,
we may want to have a per-VM, per-CPU mapping, which would avoid
all the TLBI overhead.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-11-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As VNCR_EL2.BADDR contains a VA, it is bound to trigger faults.
These faults can have multiple source:
- We haven't mapped anything on the host: we need to compute the
resulting translation, populate a TLB, and eventually map
the corresponding page
- The permissions are out of whack: we need to tell the guest about
this state of affairs
Note that the kernel doesn't support S1POE for itself yet, so
the particular case of a VNCR page mapped with no permissions
or with write-only permissions is not correctly handled yet.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-10-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Plug VNCR_EL2 in the vcpu_sysreg enum, define its RES0/RES1 bits,
and make it accessible to userspace when the VM is configured to
support FEAT_NV2.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-9-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
FEAT_NV2 introduces an interesting problem for NV, as VNCR_EL2.BADDR
is a virtual address in the EL2&0 (or EL2, but we thankfully ignore
this) translation regime.
As we need to replicate such mapping in the real EL2, it means that
we need to remember that there is such a translation, and that any
TLBI affecting EL2 can possibly affect this translation.
It also means that any invalidation driven by an MMU notifier must
be able to shoot down any such mapping.
All in all, we need a data structure that represents this mapping,
and that is extremely close to a TLB. Given that we can only use
one of those per vcpu at any given time, we only allocate one.
No effort is made to keep that structure small. If we need to
start caching multiple of them, we may want to revisit that design
point. But for now, it is kept simple so that we can reason about it.
Oh, and add a braindump of how things are supposed to work, because
I will definitely page this out at some point. Yes, pun intended.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-8-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We currently check for HCR_EL2.NV being set to decide whether we
need to repaint PSTATE.M to say EL2 instead of EL1 on exit.
However, this isn't correct when L2 is itself a hypervisor, and
that L1 as set its own HCR_EL2.NV. That's because we "flatten"
the state and inherit parts of the guest's own setup. In that case,
we shouldn't adjust PSTATE.M, as this is really EL1 for both us
and the guest.
Instead of trying to try and work out how we ended-up with HCR_EL2.NV
being set by introspecting both the host and guest states, use
a per-CPU flag to remember the context (HYP or not), and use that
information to decide whether PSTATE needs tweaking.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As we are about to expand out TLB invalidation capabilities to support
recursive virtualisation, move the decoding of a TLBI by range into
a helper that returns the base, the range and the ASID.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We currently completely ignore any sort of ASID tagging during a S1
walk, as AT doesn't care about it.
However, such information is required if we are going to create
anything that looks like a TLB from this walk.
Let's capture it both the nG and ASID information while walking
the page tables.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The address translation infrastructure is currently pretty tied to
the AT emulation.
However, we also need to features that require the use of VAs, such
as VNCR_EL2 (and maybe one of these days SPE), meaning that we need
a slightly more generic infrastructure.
Start this by introducing a new helper (__kvm_translate_va()) that
performs a S1 walk for a given translation regime, EL and PAN
settings.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If running a NV guest on an ARMv8.4-NV capable system, let's
allocate an additional page that will be used by the hypervisor
to fulfill system register accesses.
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we're about to emulate VNCR_EL2, we need its full layout.
Add it to the sysreg file.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.16
CI:
- uprev mesa
GPU:
- ACD (Adaptive Clock Distribution) support for X1-85. This is required
enable the higher frequencies.
- Drop fictional `address_space_size`. For some older devices, the address
space size is limited to 4GB to avoid potential 64b rollover math problems
in the fw. For these, an `ADRENO_QUIRK_4GB_VA` quirk is added. For
everyone else we get the address space size from the SMMU `ias` (input
address sizes), which is usually 48b.
- Improve robustness when GMU HFI responses time out
- Fix crash when throttling GPU immediately during boot
- Fix for rgb565_predicator on Adreno 7c3
- Remove `MODULE_FIRMWARE()`s for GPU, the GPU can load the firmware after
probe and having partial set of fw (ie. sqe+gmu but not zap) causes problems
MDSS:
- Added SAR2130P support to MDSS driver
DPU:
- Changed to use single CTL path for flushing on DPU 5.x+
- Improved SSPP allocation code to allow sharing of SSPP between planes
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- Misc fixes
DP:
- Switch to use new helpers for DP Audio / HDMI codec handling
- Fixed LTTPR handling
DSI:
- Added support for SA8775P
- Added SAR2130P support
MDP4:
- Fixed LCDC / LVDS controller on
HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/CAF6AEGv2Go+nseaEwRgeZbecet-h+Pf2oBKw1CobCF01xu2XVg@mail.gmail.com
|
|
While adding interconnect support for the QCM2290 platform some of them
got the c&p error, rogue MASTER_APPSS_PROC for the config_noc
interconnect. Turn that into SLAVE_QUP_0 as expected.
Fixes: 5b970ff0193d ("arm64: dts: qcom: qcm2290: Hook up interconnects")
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250207-rb1-bt-v4-4-d810fc8c94a9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the SLPI remoteproc and declare the firmware path.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-5-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable SLPI / Sensors DSP present on the SC8280XP platforms / Lenovo
X13s laptop.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-4-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SC8280XP features a SLPI (Sensor Low Power Island) core. Describe it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-3-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Certain /soc@0 subnodes are very out of order. Reshuffle them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-2-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable cpufreq on X1E80100 SoCs through the SCMI perf protocol node.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241030130840.2890904-3-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the cpucp mailbox and sram nodes required by SCMI perf protocol
on X1E80100 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241030130840.2890904-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Jens reported that the sanity checks added to the new ps883x USB retimer
driver breaks USB and display on the HP X14. Turns out the X14 only has
a retimer on one of the ports, but this initially went unnoticed due to
the missing sanity check (and error handling) in the retimer driver.
Drop the non-existing retimer from the devicetree to enable the second
USB port and the display subsystem.
Note that this also matches the ACPI tables.
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250328084154.16759-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On Lenovo ThinkPad T14s, the headset is connected via a HiFi mux to
support CTIA and OMTP headsets. This switch is used to minimise pop and
click during headset type switching.
Enable the mux controls required to power this switch along with wiring up
gpio that control the headset switching.
Without this, headset audio will be very noisy and might see headset
detection errors.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327100633.11530-7-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable PCIe5 and the SDX62 modem present on some T14s.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327081427.19693-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
BSS might be uninitialized when entering the startup code, so forbid the
use by the startup code of any variables that live after __bss_start in
the linker map.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-8-ardb+git@google.com
[will: Drop export of 'memstart_offset_seed', as this has been removed]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Accessing BSS will no longer be permitted from the startup code in
arch/arm64/kernel/pi, as some of it executes before BSS is cleared.
Clearing BSS earlier would involve managing cache coherency explicitly
in software, which is a hassle we prefer to avoid.
So move some variables that are assigned by the startup code out of BSS
and into .data.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-7-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
init_pgdir[] is only referenced from the startup code, but lives after
BSS in the linker map. Before tightening the rules about accessing BSS
from startup code, move init_pgdir[] into the __pi_ namespace, so it
does not need to be exported explicitly.
For symmetry, do the same with init_idmap_pgdir[], although it lives
before BSS.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-6-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The values stored in __boot_cpu_mode were changed without updating the
comment. Rectify that.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20250513124525.677736-1-ben.horgan@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
pmd_val(pmd) is redundant because a positive pmd_present(pmd) ensures
a positive pmd_val(pmd) according to their definitions like below.
#define pmd_val(x) ((x).pmd)
#define pmd_present(pmd) pte_present(pmd_pte(pmd))
#define pte_present(pte) (pte_valid(pte) || pte_present_invalid(pte))
#define pte_valid(pte) (!!(pte_val(pte) & PTE_VALID))
#define pte_present_invalid(pte) \
((pte_val(pte) & (PTE_VALID | PTE_PRESENT_INVALID)) == PTE_PRESENT_INVALID)
pte_present() can't be positive unless either of the flag PTE_VALID or
PTE_PRESENT_INVALID is set. In this case, pmd_val(pmd) should be positive
either.
So lets drop the redundant check pmd_val(pmd) and no functional changes
intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250508085251.204282-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
mov_q cannot really move PIE_E[0|1] macros into a general purpose register
as expected if those macro constants contain some 128 bit layout elements,
that are required for D128 page tables. The primary issue is that for D128,
PIE_E[0|1] are defined in terms of 128-bit types with shifting and masking,
which the assembler can't accommodate.
Instead pre-calculate these PIRE0_EL1/PIR_EL1 constants into asm-offsets.h
based PIE_E0_ASM/PIE_E1_ASM which can then be used in arch/arm64/mm/proc.S.
While here also drop PTE_MAYBE_NG/PTE_MAYBE_SHARED assembly overrides which
are not required any longer, as the compiler toolchains are smart enough to
compute both the PIE_[E0|E1]_ASM constants in all scenarios.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250429050511.1663235-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In the case of ICH_LR<n>.HW == 1, bit 41 of LR is just a part of pINTID
without EOI meaning, and bit 41 will be zeroed by the subsequent clearing
of ICH_LR_PHYS_ID_MASK anyway.
No functional changes intended.
Signed-off-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Link: https://lore.kernel.org/r/20250512133223.866999-1-r09922117@csie.ntu.edu.tw
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If MTE_frac is masked out unconditionally then the guest will always
see ID_AA64PFR1_EL1_MTE_frac as 0. However, a value of 0 when
ID_AA64PFR1_EL1_MTE is 2 indicates that MTE_ASYNC is supported. Hence, for
a host with ID_AA64PFR1_EL1_MTE==2 and ID_AA64PFR1_EL1_MTE_frac==0xf
(MTE_ASYNC unsupported) the guest would see MTE_ASYNC advertised as
supported whilst the host does not support it. Hence, expose the sanitised
value of MTE_frac to the guest and user-space.
As MTE_frac was previously hidden, always 0, and KVM must accept values
from KVM provided by user-space, when ID_AA64PFR1_EL1.MTE is 2 allow
user-space to set ID_AA64PFR1_EL1.MTE_frac to 0. However, ignore it to
avoid incorrectly claiming hardware support for MTE_ASYNC in the guest.
Note that linux does not check the value of ID_AA64PFR1_EL1_MTE_frac and
wrongly assumes that MTE async faults can be generated even on hardware
that does nto support them. This issue is not addressed here.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-3-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM exposes the sanitised ID registers to guests. Currently these ignore
the ID_AA64PFR1_EL1.MTE_frac field, meaning guests always see a value of
zero.
This is a problem for platforms without the MTE_ASYNC feature where
ID_AA64PFR1_EL1.MTE==0x2 and ID_AA64PFR1_EL1.MTE_frac==0xf. KVM forces
MTE_frac to zero, meaning the guest believes MTE_ASYNC is supported, when
no async fault will ever occur.
Before KVM can fix this, the architecture needs to sanitise the ID
register field for MTE_frac.
Linux itself does not use MTE_frac field and just assumes MTE async faults
can be generated if MTE is supported.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-2-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The NanoPi R5S has 4 GPIO LEDs, a RED one for SYStem power and 3 green
LEDs meant to indicate that a cable is connected to either of the
2.5GbE LAN ports or the 1GbE WAN port.
In the NanoPi R5S schematic (2204; page 19) as well as on the PCB and on
the case, SYS is used and not POWER. So replace 'power' with 'sys'.
But keep the 'power_led' label/phandle even though the kernel doesn't
use it, but it may be used outside of it.
The SYStem LED already had "heartbeat" as its default-trigger.
Set the default-trigger to "netdev" for the NICs so they will show when
LAN1/LAN2/WAN is connected and set their default-state to "off".
Also assign labels as close as possible to the labels on the case, while
still being descriptive enough in their own right.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250513170056.96259-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
PP1516 are Touchscreen devices built around the PX30 SoC and companion
devices to PX30-Cobra, again with multiple display options.
The devices feature an EMMC, OTG port and a 720x1280 display with a
touchscreen and camera
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-7-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Cobra are Touchscreen devices built around the PX30 SoC using
a variety of display options.
The devices feature an EMMC, network port, usb host + OTG ports and
a 720x1280 display with a touchscreen.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-5-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Using snps,reset-* properties to handle the ethernet-phy resets is
deprecated and instead a real phy node should be used.
Move the Ringneck phy-reset properties to such a node
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
