| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes, 14 of which are cc:stable.
Three affect DAMON. Lorenzo's five-patch series to address the
mmap_region error handling is here also.
Apart from that, various singletons"
* tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
mm: resolve faulty mmap_region() error path behaviour
mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling
mm: refactor map_deny_write_exec()
mm: unconditionally close VMAs on error
mm: avoid unsafe VMA hook invocation when error arises on mmap hook
mm/thp: fix deferred split unqueue naming and locking
mm/thp: fix deferred split queue not partially_mapped
|
|
A100 perf1 hava MicroSD slot and on-board eMMC module, add support for them.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241031070232.1793078-11-masterr3c0rd@epochal.quest
[wens@csie.org: cherry-picked out of series and GPIO header inclusion added]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The way InvenSense MPU-6050 accelerometer is mounted on the user-facing side
of the Pine64 PinePhone mainboard, which makes it rotated 90 degrees counter-
clockwise, [1] requires the accelerometer's x- and y-axis to be swapped, and
the direction of the accelerometer's y-axis to be inverted.
Rectify this by adding a mount-matrix to the accelerometer definition in the
Pine64 PinePhone dtsi file.
[1] https://files.pine64.org/doc/PinePhone/PinePhone%20mainboard%20bottom%20placement%20v1.1%2020191031.pdf
Fixes: 91f480d40942 ("arm64: dts: allwinner: Add initial support for Pine64 PinePhone")
Cc: stable@vger.kernel.org
Suggested-by: Ondrej Jirman <megi@xff.cz>
Suggested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://patch.msgid.link/129f0c754d071cca1db5d207d9d4a7bd9831dff7.1726773282.git.dsimic@manjaro.org
[wens@csie.org: Replaced Helped-by with Suggested-by]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the necessary DT changes to enable HDMI0 on FriendlyElec CM3588 NAS.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20241108171423.835496-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Banana Pi P2 Pro is the SBC made by Shenzhen SINOVOIP based on
Rockchip RK3308.
Banana Pi P2 Pro features:
- Rockchip RK3308B-S
- DDR3 512 MB
- eMMC 8 GB
- 100M lan + onboard PoE
- 40 pin and 12 pin headers
- AP6256 BT + WIFI
- TF card slot
- 2x USB 2.0 (Type-C OTG and Type-A)
- Headphone jack
Add support for Banana Pi P2 Pro.
Signed-off-by: Dmitry Yashin <dmt.yashin@gmail.com>
Link: https://lore.kernel.org/r/20241030202144.629956-3-dmt.yashin@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add new SoC dtsi file for the RK3566T variant of the Rockchip RK3566 SoC.
The difference between the RK3566T variant and the "full-fat" RK3566 variant
is in fewer supported CPU and GPU OPPs on the RK3566T, and in the absence of
a functional NPU, which we currently don't have to worry about.
Examples of the boards based on the RK3566T include the Pine64 Quartz64 Zero
SBC, [1] which is yet to be supported, the Radxa ROCK 3C, and the Radxa ZERO
3E/3W SBCs, which are both already supported. Though, Radxa doesn't mention
the use of RK3566T officially, but its official SBC specifications do state
that the maximum frequency for the Cortex-A55 cores on those SBCs is lower
than the "full-fat" RK3566's 1.8 GHz, which makes spotting the presence of
the RK3566T SoC variant rather easy. [2][3][4] An additional, helpful cue
is that Radxa handles the CPU and GPU OPPs for the RK3566T variant separately
in its downstream kernel source. [5]
The CPU and GPU OPPs supported on the RK3566T SoC variant are taken from the
vendor kernel source, [6] which uses the values of the "opp-supported-hw" OPP
properties to determine which ones are supported on a particular SoC variant.
The actual values of the "opp-supported-hw" properties make it rather easy
to see what OPPs are supported on the RK3566T SoC variant, but that, rather
unfortunately, clashes with the maximum frequencies advertised officially
for the Cortex-A55 CPU cores on the above-mentioned SBCs. [1][2][3][4] The
vendor kernel source indicates that the maximum frequency for the CPU cores
is 1.4 GHz, while the SBC specifications state that to be 1.6 GHz. Until
that discrepancy is resolved somehow, let's take the safe approach and use
the lower maximum frequency for the CPU cores.
Update the dts files of the currently supported RK3566T-based boards to use
the new SoC dtsi for the RK3566T variant. This actually takes the CPU cores
and the GPUs found on these boards out of their earlier overclocks, but it
also means that the officially advertised specifications [1][2][3][4] of the
highest supported frequencies for the Cortex-A55 CPU cores on these boards
may actually be wrong, as already explained above.
The correctness of the introduced changes was validated by decompiling and
comparing all affected board dtb files before and after these changes.
[1] https://wiki.pine64.org/wiki/Quartz64
[2] https://dl.radxa.com/rock3/docs/hw/3c/radxa_rock3c_product_brief.pdf
[3] https://dl.radxa.com/zero3/docs/hw/3e/radxa_zero_3e_product_brief.pdf
[4] https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_product_brief.pdf
[5] https://github.com/radxa/kernel/commit/2dfd51da472e7ebb5ef0d3db78f902454af826b8
[6] https://raw.githubusercontent.com/rockchip-linux/kernel/f8b9431ee38ed561650be7092ab93f564598daa9/arch/arm64/boot/dts/rockchip/rk3568.dtsi
Cc: TL Lim <tllim@pine64.org>
Cc: Marek Kraus <gamiee@pine64.org>
Cc: Tom Cubie <tom@radxa.com>
Cc: FUKAUMI Naoki <naoki@radxa.com>
Helped-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Helped-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/a85b9bdc176c542fea261fe7ef37697aebb42e8b.1730516702.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Rename the Rockchip RK356x SoC dtsi files and, consequently, adjust their
contents appropriately, to prepare them for the ability to specify different
CPU and GPU OPPs for each of the supported RK356x SoC variants.
The first new RK356x SoC variant to be introduced is the RK3566T, which the
Pine64 Quartz64 Zero SBC is officially based on. [1] Some other SBCs are
also based on the RK3566T variant, including Radxa ROCK 3C and ZERO 3E/3W,
but the slight trouble is that Radxa doesn't state that officially. Though,
it's rather easy to spot the RK3566T on such boards, because their official
specifications state that the maximum frequency for the Cortex-A55 cores is
lower than the "full-fat" RK3566's 1.8 GHz. [2][3][4]
These changes follow the approach used for the Rockchip RK3588 SoC variants,
which was introduced and described further in commit def88eb4d836 ("arm64:
dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs"). Please
see that commit for a more detailed explanation.
No functional changes are introduced, which was validated by decompiling and
comparing all affected board dtb files before and after these changes. In
more detail, the affected dtb files have some of their blocks shuffled around
a bit and some of their phandles have different values, as a result of the
changes to the order in which the building blocks from the parent dtsi files
are included, but they effectively remain the same as the originals.
As a side note, due to the nature of introduced changes, this commit is a bit
more readable when viewed using the --break-rewrites option for git-log(1).
[1] https://wiki.pine64.org/wiki/Quartz64
[2] https://dl.radxa.com/rock3/docs/hw/3c/radxa_rock3c_product_brief.pdf
[3] https://dl.radxa.com/zero3/docs/hw/3e/radxa_zero_3e_product_brief.pdf
[4] https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_product_brief.pdf
Related-to: def88eb4d836 ("arm64: dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/77e7450b8280bbdf4e2dc47366c9da85d4d8d1de.1730516702.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Update the lower/upper voltage limits and the exact voltages for the Rockchip
RK356x CPU OPPs, using the most conservative values (i.e. the highest per-OPP
voltages) found in the vendor kernel source. [1]
Using the most conservative per-OPP voltages ensures reliable CPU operation
regardless of the actual CPU binning, with the downside of possibly using
a bit more power for the CPU cores than absolutely needed.
Additionally, fill in the missing "clock-latency-ns" CPU OPP properties, using
the values found in the vendor kernel source. [1]
[1] https://raw.githubusercontent.com/rockchip-linux/kernel/f8b9431ee38ed561650be7092ab93f564598daa9/arch/arm64/boot/dts/rockchip/rk3568.dtsi
Related-to: eb665b1c06bc ("arm64: dts: rockchip: Update GPU OPP voltages in RK356x SoC dtsi")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/f816cd24b62742dd05a1b7c6fe162bb581c9b3bf.1730516702.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for voltage ranges to the CPU, GPU and DMC OPPs defined in the
SoC dtsi for Rockchip OP1, as a variant of the Rockchip RK3399. This may be
useful if there are any OP1-based boards whose associated voltage regulators
are unable to deliver the exact voltages; otherwise, it causes no functional
changes to the resulting OPP voltages at runtime.
These changes cannot cause stability issues or any kind of damage, because
it's perfectly safe to use the highest voltage from an OPP group for each OPP
in the same group. The only possible negative effect of using higher voltages
is wasted energy in form of some additionally generated heat.
Reported-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/dbee35c002bda99e44f8533623d94f202a60da95.1730881777.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the HDMI0 port for the Indiedroid Nova.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20241031150505.967909-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the GPU for the Indiedroid Nova.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20241031150505.967909-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Correct the audio name for the Indiedroid Nova from
rockchip,es8388-codec to rockchip,es8388. This name change corrects a
kernel log error of "ASoC: driver name too long 'rockchip,es8388-codec'
-> 'rockchip_es8388'".
Fixes: 3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20241031150505.967909-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
sort target dtb files properly in Makefile for rockchip.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20241028072344.1514-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix the ACPI processor driver initialization ordering after recent
changes to avoid calling init_freq_invariance_cppc() too early on AMD
platforms (Mario Limonciello)"
* tag 'acpi-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Move arch_init_invariance_cppc() call later
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here is a (hopefully) final round of arm64 fixes for 6.12 that address
some user-visible floating point register corruption. Both of the
Marks have been working on this for a couple of weeks and we've ended
up in a position where SVE is solid but SME still has enough pending
issues that the most pragmatic solution for the release and stable
backports is to disable the feature. Yes, it's a shame, but the
hardware is rare as hen's teeth at the moment and we're better off
getting back to a known good state before fixing it all properly.
We're also improving the selftests for 6.13 to help avoid merging
broken code in the future.
Anyway, the good news is that we're removing a lot more code than
we're adding.
Summary:
- Fix handling of SVE traps from userspace on preemptible kernels
when converting the saved floating point state into SVE state.
- Remove broken support for the SMCCCv1.3 "SVE discard hint"
optimisation.
- Disable SME support, as the current support code suffers from
numerous issues around signal delivery, ptrace access and
context-switch which can lead to user-visible corruption of the
register state"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Kconfig: Make SME depend on BROKEN for now
arm64: smccc: Remove broken support for SMCCCv1.3 SVE discard hint
arm64/sve: Discard stale CPU state when handling SVE traps
|
|
KVM/riscv changes for 6.13
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
|
|
The function scs_patch_vmlinux() was removed in the LPA2 boot code
refactoring so remove the declaration as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20241106185513.3096442-8-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In some cases, the compiler may decide to emit DWARF FDE frames with
64-bit signed fields for the code offset and range fields. This may
happen when using the large code model, for instance, which permits
an executable to be spread out over more than 4 GiB of address space.
Whether this is the case can be inferred from the augmentation data in
the CIE frame, so decode this data before processing the FDE frames.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20241106185513.3096442-7-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The dynamic SCS patching code pretends to parse the DWARF augmentation
data in the CIE (header) frame, and handle accordingly when processing
the individual FDE frames based on this CIE frame. However, the boolean
variable is defined inside the loop, and so the parsed value is ignored.
The same applies to the code alignment field, which is also read from
the header but then discarded.
This was never spotted before because Clang is the only compiler that
supports dynamic SCS patching (which is essentially an Android feature),
and the unwind tables it produces are highly uniform, and match the
de facto defaults.
So instead of testing for the 'z' flag in the augmentation data field,
require a fixed augmentation data string of 'zR', and simplify the rest
of the code accordingly.
Also introduce some error codes to specify why the patching failed, and
log it to the kernel console on failure when this happens when loading a
module. (Doing so for vmlinux is infeasible, as the patching is done
extremely early in the boot.)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20241106185513.3096442-6-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The profiling of single-thread selftests bench reveals a bottlenect in
caches_clean_inval_pou() on ARM64. On my local testing machine, this
function takes approximately 34% of CPU cycles for trig-uprobe-nop and
trig-uprobe-push.
This patch add a check to avoid unnecessary cache flush when writing
instruction to the xol slot. If the instruction is same with the
existing instruction in slot, there is no need to synchronize D/I cache.
Since xol slot allocation and updates occur on the hot path of uprobe
handling, The upstream kernel running on Kunpeng916 (Hi1616), 4 NUMA
nodes, 64 cores@ 2.4GHz reveals this optimization has obvious gain for
nop and push testcases.
Before (next-20240918)
----------------------
uprobe-nop ( 1 cpus): 0.418 ± 0.001M/s ( 0.418M/s/cpu)
uprobe-push ( 1 cpus): 0.411 ± 0.005M/s ( 0.411M/s/cpu)
uprobe-ret ( 1 cpus): 2.052 ± 0.002M/s ( 2.052M/s/cpu)
uretprobe-nop ( 1 cpus): 0.350 ± 0.000M/s ( 0.350M/s/cpu)
uretprobe-push ( 1 cpus): 0.353 ± 0.000M/s ( 0.353M/s/cpu)
uretprobe-ret ( 1 cpus): 1.074 ± 0.001M/s ( 1.074M/s/cpu)
After
-----
uprobe-nop ( 1 cpus): 0.926 ± 0.000M/s ( 0.926M/s/cpu)
uprobe-push ( 1 cpus): 0.910 ± 0.001M/s ( 0.910M/s/cpu)
uprobe-ret ( 1 cpus): 2.056 ± 0.001M/s ( 2.056M/s/cpu)
uretprobe-nop ( 1 cpus): 0.653 ± 0.001M/s ( 0.653M/s/cpu)
uretprobe-push ( 1 cpus): 0.645 ± 0.000M/s ( 0.645M/s/cpu)
uretprobe-ret ( 1 cpus): 1.093 ± 0.001M/s ( 1.093M/s/cpu)
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Link: https://lore.kernel.org/r/20240919121719.2148361-1-liaochang1@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add an API that will allow updates of the direct/linear map for a set of
physically contiguous pages.
It will be used in the following patches.
Link: https://lkml.kernel.org/r/20241023162711.2579610-6-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops <kdevops@lists.linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several architectures support text patching, but they name the header
files that declare patching functions differently.
Make all such headers consistently named text-patching.h and add an empty
header in asm-generic for architectures that do not support text patching.
Link: https://lkml.kernel.org/r/20241023162711.2579610-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops <kdevops@lists.linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For lis3mdl, values are based on datasheet and PCB drawing
and tested on a real device.
For af8133j, values are from testing on a real device.
Signed-off-by: Shoji Keita <awaittrot@shjk.jp>
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://patch.msgid.link/20240908214718.36316-3-andrej.skvortzov@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
New batches of PinePhones switched the magnetometer to AF8133J from
LIS3MDL because lack of ST components.
Both chips use the same PB1 pin, but in different modes.
LIS3MDL uses it as an gpio input to handle interrupt.
AF8133J uses it as an gpio output as a reset signal.
It wasn't possible at runtime to enable both device tree nodes and
detect supported sensor at probe time, because both drivers try to
acquire the same gpio in different modes.
Device tree fixup will be done in firmware without introducing new board
revision and new dts.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://patchwork.ozlabs.org/project/uboot/patch/20240211092824.395155-1-andrej.skvortzov@gmail.com/
Link: https://patch.msgid.link/20240908214718.36316-2-andrej.skvortzov@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Commit be2881824ae9 ("arm64/build: Assert for unwanted sections")
introduced an assertion to ensure that the .data.rel.ro section does
not exist.
However, this check does not work when CONFIG_LTO_CLANG is enabled,
because .data.rel.ro matches the .data.[0-9a-zA-Z_]* pattern in the
DATA_MAIN macro.
Move the ASSERT() above the RW_DATA() line.
Fixes: be2881824ae9 ("arm64/build: Assert for unwanted sections")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241106161843.189927-1-masahiroy@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Although support for SME was merged in v5.19, we've since uncovered a
number of issues with the implementation, including issues which might
corrupt the FPSIMD/SVE/SME state of arbitrary tasks. While there are
patches to address some of these issues, ongoing review has highlighted
additional functional problems, and more time is necessary to analyse
and fix these.
For now, mark SME as BROKEN in the hope that we can fix things properly
in the near future. As SME is an OPTIONAL part of ARMv9.2+, and there is
very little extant hardware, this should not adversely affect the vast
majority of users.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org # 5.19
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241106164220.2789279-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
SMCCCv1.3 added a hint bit which callers can set in an SMCCC function ID
(AKA "FID") to indicate that it is acceptable for the SMCCC
implementation to discard SVE and/or SME state over a specific SMCCC
call. The kernel support for using this hint is broken and SMCCC calls
may clobber the SVE and/or SME state of arbitrary tasks, though FPSIMD
state is unaffected.
The kernel support is intended to use the hint when there is no SVE or
SME state to save, and to do this it checks whether TIF_FOREIGN_FPSTATE
is set or TIF_SVE is clear in assembly code:
| ldr <flags>, [<current_task>, #TSK_TI_FLAGS]
| tbnz <flags>, #TIF_FOREIGN_FPSTATE, 1f // Any live FP state?
| tbnz <flags>, #TIF_SVE, 2f // Does that state include SVE?
|
| 1: orr <fid>, <fid>, ARM_SMCCC_1_3_SVE_HINT
| 2:
| << SMCCC call using FID >>
This is not safe as-is:
(1) SMCCC calls can be made in a preemptible context and preemption can
result in TIF_FOREIGN_FPSTATE being set or cleared at arbitrary
points in time. Thus checking for TIF_FOREIGN_FPSTATE provides no
guarantee.
(2) TIF_FOREIGN_FPSTATE only indicates that the live FP/SVE/SME state in
the CPU does not belong to the current task, and does not indicate
that clobbering this state is acceptable.
When the live CPU state is clobbered it is necessary to update
fpsimd_last_state.st to ensure that a subsequent context switch will
reload FP/SVE/SME state from memory rather than consuming the
clobbered state. This and the SMCCC call itself must happen in a
critical section with preemption disabled to avoid races.
(3) Live SVE/SME state can exist with TIF_SVE clear (e.g. with only
TIF_SME set), and checking TIF_SVE alone is insufficient.
Remove the broken support for the SMCCCv1.3 SVE saving hint. This is
effectively a revert of commits:
* cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
* a7c3acca5380 ("arm64: smccc: Save lr before calling __arm_smccc_sve_check()")
... leaving behind the ARM_SMCCC_VERSION_1_3 and ARM_SMCCC_1_3_SVE_HINT
definitions, since these are simply definitions from the SMCCC
specification, and the latter is used in KVM via ARM_SMCCC_CALL_HINTS.
If we want to bring this back in future, we'll probably want to handle
this logic in C where we can use all the usual FPSIMD/SVE/SME helper
functions, and that'll likely require some rework of the SMCCC code
and/or its callers.
Fixes: cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241106160448.2712997-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The hugepage parameter was deprecated since commit ddc1a5cbc05d
("mempolicy: alloc_pages_mpol() for NUMA policy without vma"), for
PMD-sized THP, it still tries only preferred node if possible in
vma_alloc_folio() by checking the order of the folio allocation.
Link: https://lkml.kernel.org/r/20241010061556.1846751-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For clarity. It's increasingly hard to reason about the code, when KASLR
is moving around the boundaries. In this case where KASLR is randomizing
the location of the kernel image within physical memory, the maximum
number of address bits for physical memory has not changed.
What has changed is the ending address of memory that is allowed to be
directly mapped by the kernel.
Let's name the variable, and the associated macro accordingly.
Also, enhance the comment above the direct_map_physmem_end definition,
to further clarify how this all works.
Link: https://lkml.kernel.org/r/20241009025024.89813-1-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jordan Niethe <jniethe@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
arch_init_invariance_cppc() is called at the end of
acpi_cppc_processor_probe() in order to configure frequency invariance
based upon the values from _CPC.
This however doesn't work on AMD CPPC shared memory designs that have
AMD preferred cores enabled because _CPC needs to be analyzed from all
cores to judge if preferred cores are enabled.
This issue manifests to users as a warning since commit 21fb59ab4b97
("ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn"):
```
Could not retrieve highest performance (-19)
```
However the warning isn't the cause of this, it was actually
commit 279f838a61f9 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") which exposed the issue.
To fix this problem, change arch_init_invariance_cppc() into a new weak
symbol that is called at the end of acpi_processor_driver_init().
Each architecture that supports it can declare the symbol to override
the weak one.
Define it for x86, in arch/x86/kernel/acpi/cppc.c, and for all of the
architectures using the generic arch_topology.c code.
Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219431
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241104222855.3959267-1-superm1@kernel.org
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add the four syscalls setxattrat(), getxattrat(), listxattrat() and
removexattrat(). Those can be used to operate on extended attributes,
especially security related ones, either relative to a pinned directory
or on a file descriptor without read access, avoiding a
/proc/<pid>/fd/<fd> detour, requiring a mounted procfs.
One use case will be setfiles(8) setting SELinux file contexts
("security.selinux") without race conditions and without a file
descriptor opened with read access requiring SELinux read permission.
Use the do_{name}at() pattern from fs/open.c.
Pass the value of the extended attribute, its length, and for
setxattrat(2) the command (XATTR_CREATE or XATTR_REPLACE) via an added
struct xattr_args to not exceed six syscall arguments and not
merging the AT_* and XATTR_* flags.
[AV: fixes by Christian Brauner folded in, the entire thing rebased on
top of {filename,file}_...xattr() primitives, treatment of empty
pathnames regularized. As the result, AT_EMPTY_PATH+NULL handling
is cheap, so f...(2) can use it]
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Link: https://lore.kernel.org/r/20240426162042.191916-1-cgoettsche@seltendoof.de
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
CC: x86@kernel.org
CC: linux-alpha@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-ia64@vger.kernel.org
CC: linux-m68k@lists.linux-m68k.org
CC: linux-mips@vger.kernel.org
CC: linux-parisc@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-s390@vger.kernel.org
CC: linux-sh@vger.kernel.org
CC: sparclinux@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: audit@vger.kernel.org
CC: linux-arch@vger.kernel.org
CC: linux-api@vger.kernel.org
CC: linux-security-module@vger.kernel.org
CC: selinux@vger.kernel.org
[brauner: slight tweaks]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The logic for handling SVE traps manipulates saved FPSIMD/SVE state
incorrectly, and a race with preemption can result in a task having
TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SVE traps enabled). This has been observed to result
in warnings from do_sve_acc() where SVE traps are not expected while
TIF_SVE is set:
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
Warnings of this form have been reported intermittently, e.g.
https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/
https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/
The race can occur when the SVE trap handler is preempted before and
after manipulating the saved FPSIMD/SVE state, starting and ending on
the same CPU, e.g.
| void do_sve_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
|
| sve_init_regs() {
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| ...
| } else {
| fpsimd_to_sve(current);
| current->thread.fp_type = FP_STATE_SVE;
| }
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SVE traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Fixes: cccb78ce89c4 ("arm64/sve: Rework SVE access trap to convert state in registers")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241030-arm64-fpsimd-foreign-flush-v1-1-bd7bd66905a2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The smem is necessary for the socinfo driver. Additionally
smem requires the tcsr_mutex node. Therefore add both the nodes.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20241016151528.2893599-4-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add initial device tree support for the Qualcomm IPQ5424 SoC and
rdp466 board.
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/20241028060506.246606-6-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add board DT file for the Qualcomm Snapdragon AR2 Gen1 Smart Viewer
Development Kit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241102-sar2130p-dt-v4-3-60b7220fd0dd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add DT file for the Qualcomm SAR2130P platform.
Co-developed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241102-sar2130p-dt-v4-2-60b7220fd0dd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Qualcomm Snapdragon X Elite Devkit for Windows has the same
configuration as the CRD variant i.e. all 3 of the type C ports
support external DP altmode. Add all the nodes needed to enable
them.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241025123551.3528206-4-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The x1e001de devkit devices are expected to ship without external
speaker/mic connected, so just enable headphone jack on it.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241025123551.3528206-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add initial support for x1e001de devkit platform. This includes:
-DSPs
-Ethernet (RTL8125BG) over the pcie 5 instance.
-NVme
-Wifi
-USB-C ports
Link: https://www.qualcomm.com/news/releases/2024/05/qualcomm-accelerates-development-for-copilot--pcs-with-snapdrago
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025123227.3527720-4-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While "phy-names" is allowed for sata-port nodes, the names used aren't
documented and are incorrect ("sata-phy" is what's documented). The name
for a single entry is fairly useless, so just drop the property.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Young bit operation on PMD table entry is only supported if
FEAT_HAFT enabled system wide. Add a warning for notifying
the misbehaviour.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241102104235.62560-6-yangyicong@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
With the support of FEAT_HAFT, the NONLEAF_PMD_YOUNG can be enabled
on arm64 since the hardware is capable of updating the AF flag for
PMD table descriptor. Since the AF bit of the table descriptor
shares the same bit position in block descriptors, we only need
to implement arch_has_hw_nonleaf_pmd_young() and select related
configs. The related pmd_young test/update operations keeps the
same with and already implemented for transparent page support.
Currently ARCH_HAS_NONLEAF_PMD_YOUNG is used to improve the
efficiency of lru-gen aging.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241102104235.62560-5-yangyicong@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Armv8.9/v9.4 introduces the feature Hardware managed Access Flag
for Table descriptors (FEAT_HAFT). The feature is indicated by
ID_AA64MMFR1_EL1.HAFDBS == 0b0011 and can be enabled by
TCR2_EL1.HAFT so it has a dependency on FEAT_TCR2.
Adds the Kconfig for FEAT_HAFT and support detecting and enabling
the feature. The feature is enabled in __cpu_setup() before MMU on
just like HA. A CPU capability is added to notify the user of the
feature.
Add definition of P{G,4,U,M}D_TABLE_AF bit and set the AF bit
when creating the page table, which will save the hardware
from having to update them at runtime. This will be ignored if
FEAT_HAFT is not enabled.
The AF bit of table descriptors cannot be managed by the software
per spec, unlike the HA. So this should be used only if it's supported
system wide by system_supports_haft().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241102104235.62560-4-yangyicong@huawei.com
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[catalin.marinas@arm.com: added the ID check back to __cpu_setup in case of future CPU errata]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Test both PTE_TABLE_BIT and PTE_VALID for block mappings, similar to KVM S2
ptdump. This ensures consistency in identifying block mappings, both in the
S1 and the S2 page tables. Besides being kernel page tables, there will not
be any unmapped (!PTE_VALID) block mappings.
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20241105044154.4064181-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The runtime P4D/PUD folding logic assumes that the respective pgd_t* and
p4d_t* arguments are pointers into actual page tables that are part of
the hierarchy being operated on.
This may not always be the case, and we have been bitten once by this
already [0], where the argument was actually a stack variable, and in
this case, the logic does not work at all.
So let's add a VM_BUG_ON() for each case, to ensure that the address of
the provided page table entry is consistent with the address being
translated.
[0] https://lore.kernel.org/all/20240725090345.28461-1-will@kernel.org/T/#u
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20241105093919.1312049-2-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
TCR2_EL1 introduced some additional controls besides TCR_EL1. Currently
only PIE is supported and enabled by writing TCR2_EL1 directly if PIE
detected.
Introduce a named register 'tcr2' just like 'tcr' we've already had.
It'll be initialized to 0 and updated if certain feature detected and
needs to be enabled. Touch the TCR2_EL1 registers at last with the
updated 'tcr2' value if FEAT_TCR2 supported by checking
ID_AA64MMFR3_EL1.TCRX. Then we can extend the support of other features
controlled by TCR2_EL1.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241102104235.62560-3-yangyicong@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Update ID_AA64MMFR1_EL1 register fields definition per DDI0601 (ID092424)
2024-09. ID_AA64MMFR1_EL1.ETS adds definition for FEAT_ETS2 and
FEAT_ETS3. ID_AA64MMFR1_EL1.HAFDBS adds definition for FEAT_HAFT and
FEAT_HDBSS.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241102104235.62560-2-yangyicong@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Where the last set of fixes was mostly drivers, this time the
devicetree changes all come at once, targeting mostly the Rockchips,
Qualcomm and NXP platforms.
The Qualcomm bugfixes target the Snapdragon X Elite laptops,
specifically problems with PCIe and NVMe support to improve
reliability, and a boot regresion on msm8939.
Also for Snapdragon platforms, there are a number of correctness
changes in the several platform specific device drivers, but none of
these are as impactful.
On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants,
correcting individual entries in the devicetree that were incorrect
and causing the media, video, mmc and spi drivers to misbehave in
minor ways.
The Arm SCMI firmware driver gets fixes for a use-after-free bug and
for correctly parsing firmware information.
On the RISC-V side, there are three minor devicetree fixes for
starfive and sophgo, again addressing only minor mistakes. One device
driver patch fixes a problem with spurious interrupt handling"
* tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (63 commits)
firmware: arm_scmi: Use vendor string in max-rx-timeout-ms
dt-bindings: firmware: arm,scmi: Add missing vendor string
riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes
arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes
ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
ARM: dts: rockchip: Fix the spi controller on rk3036
ARM: dts: rockchip: drop grf reference from rk3036 hdmi
ARM: dts: rockchip: fix rk3036 acodec node
arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
arm64: dts: qcom: x1e80100: fix PCIe5 interconnect
arm64: dts: qcom: x1e80100: fix PCIe4 interconnect
arm64: dts: qcom: x1e80100: Fix up BAR spaces
MAINTAINERS: invert Misc RISC-V SoC Support's pattern
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
...
|
|
To avoid duplication of inline asm between C and Rust, we need to
import the inline asm from the relevant `jump_label.h` header into Rust.
To make that easier, this patch updates the header files to expose the
inline asm via a new ARCH_STATIC_BRANCH_ASM macro.
The header files are all updated to define a ARCH_STATIC_BRANCH_ASM that
takes the same arguments in a consistent order so that Rust can use the
same logic for every architecture.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: " =?utf-8?q?Bj=C3=B6rn_Roy_Baron?= " <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/20241030-tracepoint-v12-4-eec7f0f8ad22@google.com
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> # RISC-V
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
