summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2016-04-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are the latest bug fixes for ARM SoCs, mostly addressing recent regressions. Changes are across several platforms, so I'm listing every change separately here. Regressions since 4.5: - A correction of the psci firmware DT binding, to prevent users from relying on unintended semantics - Actually getting the newly merged clock driver for some OMAP platforms to work - A revert of patches for the Qualcomm BAM, these need to be reworked for 4.7 to avoid breaking boards other than the one they were intended for - A correction for the I2C device nodes on the Socionext Uniphier platform - i.MX SDHCI was broken for non-DT platforms due to a change with the setting of the DMA mask - A revert of a patch that accidentally added a nonexisting clock on the Rensas "Porter" board - A couple of OMAP fixes that are all related to suspend after the power domain changes for dra7 - On Mediatek, revert part of the power domain initialization changes that broke mt8173-evb Fixes for older bugs: - Workaround for an "external abort" in the omap34xx suspend/resume code. - The USB1/eSATA should not be listed as an excon device on am57xx-beagle-x15 (broken since v4.0) - A v4.5 regression in the TI AM33xx and AM43XX DT specifying incorrect DMA request lines for the GPMC - The jiffies calibration on Renesas platforms was incorrect for some modern CPU cores. - A hardware errata woraround for clockdomains on TI DRA7" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: drivers: firmware: psci: unify enable-method binding on ARM {64,32}-bit systems arm64: dts: uniphier: fix I2C nodes of PH1-LD20 ARM: shmobile: timer: Fix preset_lpj leading to too short delays Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" ARM: dts: r8a7791: Don't disable referenced optional clocks Revert "ARM: OMAP: Catch callers of revision information prior to it being populated" ARM: OMAP3: Fix external abort on 36xx waking from off mode idle ARM: dts: am57xx-beagle-x15: remove extcon_usb1 ARM: dts: am437x: Fix GPMC dma properties ARM: dts: am33xx: Fix GPMC dma properties Revert "soc: mediatek: SCPSYS: Fix double enabling of regulators" ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask ARM: DRA7: clockdomain: Implement timer workaround for errata i874 ARM: OMAP: Catch callers of revision information prior to it being populated ARM: dts: dra7: Correct clock tree for sys_32k_ck ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node" Revert "dts: msm8974: Add blsp2_bam dma node" ARM: dts: Add clocks for dm814x ADPLL
2016-04-25Merge tag 'omap-for-v4.6/dt-ti81xx-signed' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Enable dm814x and dra62x clock driver. This branch has a dependency to the clk-ti branch from the Linux clk tree for the ADPLL clock driver. Otherwise things won't keep booting properly when we flip over to use the clock driver instead of fixed clocks set up by the bootloader. * tag 'omap-for-v4.6/dt-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add clocks for dm814x ADPLL
2016-04-23Merge tag 'qcom-fixes-for-4.6-rc2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Merge "Qualcomm Fixes for v4.6-rc2" from Andy Gross: * Revert BAM usage on MSM8974 boards * tag 'qcom-fixes-for-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node" Revert "dts: msm8974: Add blsp2_bam dma node"
2016-04-22Merge tag 'imx-fixes-4.6' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: i.MX fixes for 4.6" from Shawn Guo: The i.MX fixes for 4.6: - The sdhci-esdhc-imx DMA support is broken due to commit 7b91369b4655 ("mmc: sdhci: Set DMA mask when adding host"). It requires device's dma_mask be set up properly to get DMA work. The fixing patch initializes the DMA mask to enable the access again. * tag 'imx-fixes-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask
2016-04-22Merge tag 'omap-for-v4.6/fixes-rc3' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes for v4.6-rc cycle" from Tony Lindgren: Fixes for omaps for v4.6-rc cycle: - Clockdomain fix for dra7 timer interrupts - Two fixes for GPMC EDMA binding, I missed the need for a merge with GPMC changes and EDMA changes - Fix beagle-x15 eSATA by dropping misconfigured extcon_usb1 - Fix occasional external aborts on 36xx with PM that we've been chasing for past few months. It turned out to be duplicate restore of INTC registers that can in some cases cause us to hit erratum 1.106. * tag 'omap-for-v4.6/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3: Fix external abort on 36xx waking from off mode idle ARM: dts: am57xx-beagle-x15: remove extcon_usb1 ARM: dts: am437x: Fix GPMC dma properties ARM: dts: am33xx: Fix GPMC dma properties ARM: DRA7: clockdomain: Implement timer workaround for errata i874
2016-04-22Merge tag 'renesas-fixes-for-v4.6' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v4.6" from Simon Horman: Renesas ARM Based SoC Fixes for v4.6 * Correct preset_lpj calculation which may lead to too short delays * Correct handling of optional clocks on r8a7791 to restore access to the serial port the porter board * tag 'renesas-fixes-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: timer: Fix preset_lpj leading to too short delays Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" ARM: dts: r8a7791: Don't disable referenced optional clocks
2016-04-22Merge tag 'omap-for-v4.6/fixes-rc2-v2-signed' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v4.6-rc2" from Tony Lindgren Fixes for omaps against v4.6-rc2, mostly to fix suspend for beagle-x15 that broke when we added runtime based SoC revision detection earlier. It seems suspend worked earlier as things were only partially initialized, while now we initialize things properly for dra7. Note that the "ARM: OMAP: Catch callers of revision information prior to it being populated" had to be reverted as it caused bogus warnings for other SoCs because omap initcalls bail out based on revision being set to 0 for other SoCs. These initcalls will mostly just disappear when we drop support for omap3 legacy booting. Also included is a fix for dra7 sys_32k_ck clock source that is not enabled on boot making system fall back to using emulated clock. * tag 'omap-for-v4.6/fixes-rc2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (198 commits) Revert "ARM: OMAP: Catch callers of revision information prior to it being populated" ARM: OMAP: Catch callers of revision information prior to it being populated ARM: dts: dra7: Correct clock tree for sys_32k_ck ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen Linux 4.6-rc2 v4l2-mc: avoid warning about unused variable Convert straggling drivers to new six-argument get_user_pages() .mailmap: add Christophe Ricard Make CONFIG_FHANDLE default y mm/page_isolation.c: fix the function comments oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head mm/page_isolation: fix tracepoint to mirror check function behavior mm/rmap: batched invalidations should use existing api x86/mm: TLB_REMOTE_SEND_IPI should count pages mm: fix invalid node in alloc_migrate_target() include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock() mm, kasan: fix compilation for CONFIG_SLAB MAINTAINERS: orangefs mailing list is subscribers-only net: mvneta: fix changing MTU when using per-cpu processing ...
2016-04-21Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Three further fixes for ARM. Alexandre Courbot was having problems with DMA allocations with the GFP flags affecting where the tracking data was being allocated from. Vladimir Murzin noticed that the CPU feature code was not entirely correct, which can cause some features to be misreported" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8564/1: fix cpu feature extracting helper ARM: 8563/1: fix demoting HWCAP_SWP ARM: 8551/2: DMA: Fix kzalloc flags in __dma_alloc
2016-04-20ARM: shmobile: timer: Fix preset_lpj leading to too short delaysGeert Uytterhoeven
On all shmobile ARM SoCs, loop-based delays may complete early, which can be after only 1/3 (Cortex A9) or 1/2 (Cortex A7 or A15) of the minimum required time. This is caused by calculating preset_lpj based on incorrect assumptions about the number of clock cycles per loop: - All of Cortex A7, A9, and A15 run __loop_delay() at 1 loop per CPU clock cycle, - As of commit 11d4bb1bd067f9d0 ("ARM: 7907/1: lib: delay-loop: Add align directive to fix BogoMIPS calculation"), Cortex A8 runs __loop_delay() at 1 loop per 2 instead of 3 CPU clock cycles. On SoCs with Cortex A7 and/or A15 CPU cores, this went unnoticed, as delays use the ARM arch timer if available. R-Car Gen2 doesn't work if the arch timer is disabled. However, APE6 can be used without the arch timer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-20Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins"Sjoerd Simons
This reverts commit 19417bd9c511 ("ARM: dts: porter: Enable SCIF_CLK frequency and pins") as according to http://elinux.org/File:R-CarM2-KOELSCH_PORTER-B_PORTER_C_Comparison.pdf the external oscillator for SCIF_CLK is not mounted on the porter boards. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-20ARM: dts: r8a7791: Don't disable referenced optional clocksSjoerd Simons
clk_get on a disabled clock node will return EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their clocks property. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them to prevent this. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-19ARM: 8564/1: fix cpu feature extracting helperVladimir Murzin
Commit b8c9592 "ARM: 8318/1: treat CPU feature register fields as signed quantities" introduced helper to extract signed quantities of 4-bit blocks. However, with a current code feature with value 0b1000 isn't rejected as negative. So fix the "if" condition. Reported-by: Jonathan Brawn <Jon.Brawn@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-19ARM: 8563/1: fix demoting HWCAP_SWPVladimir Murzin
Commit b8c9592 "ARM: 8318/1: treat CPU feature register fields as signed quantities" accidentally altered cpuid register used to demote HWCAP_SWP. ARM ARM says that SyncPrim_instrs bits in ID_ISAR3 should be used with SynchPrim_instrs_frac from ID_ISAR4. So, follow this rule. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-19Revert "ARM: OMAP: Catch callers of revision information prior to it being ↵Tony Lindgren
populated" This reverts commit 571afb4c8a4bbe88541364e7f6827340562f2736.
2016-04-15ARM: 8551/2: DMA: Fix kzalloc flags in __dma_allocAlexandre Courbot
Commit 19e6e5e5392b ("ARM: 8547/1: dma-mapping: store buffer information") allocates a structure meant for internal buffer management with the GFP flags of the buffer itself. This can trigger the following safeguard in the slab/slub allocator: if (unlikely(flags & GFP_SLAB_BUG_MASK)) { pr_emerg("gfp: %un", flags & GFP_SLAB_BUG_MASK); BUG(); } Fix this by filtering the flags that make the slab allocator unhappy. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-14ARM: OMAP3: Fix external abort on 36xx waking from off mode idleDave Gerlach
Depending on timing during the resume path from off mode on 36xx, we may see external aborts. These seem to be caused by the following: - OMAP3 Advisory 1.62 "MPU Cannot Exit from Standby" says we need to disable intc autoidle before WFI - DM3730 Advisory 1.106 "MPU Leaves MSTANDBY State Before IDLEREQ of Interrupt Controller is Released" says we need to wait before accessing intc omap3_intc_resume_idle restores the intc autoidle for all resume paths, however in the resume path from off mode only it is also being restored by omap_intc_restore_context before this call to omap3_intc_resume_idle happens. The second restore of the intc autoidle in this path is what appears to be causing the external abort so for the off mode resume path let's rely on omap_intc_restore_context to restore intc autoidle, and for all other paths let omap3_intc_resume_idle handle it as it is now. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13ARM: dts: am57xx-beagle-x15: remove extcon_usb1Roger Quadros
USB1 controller is hardwired to be used as Host only port so we don't need to check ID pin state and can get rid of extcon_usb1. This also reduces USB1 controller's and so eSATA power's dependency with EXTCON. This fixes eSATA port with multi_v7_defconfig. Cc: Franklin S Cooper Jr. <fcooper@ti.com> Cc: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Franklin S Cooper Jr. <fcooper@ti.com> [tony@atomide.com: updated to describe what it fixes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13ARM: dts: am437x: Fix GPMC dma propertiesFranklin S Cooper Jr
This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: cce1ee000187 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3") Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13ARM: dts: am33xx: Fix GPMC dma propertiesFranklin S Cooper Jr
This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: b5e509066074 ("ARM: DTS: am33xx: Use the new DT bindings for the eDMA3") Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13Merge tag 'for-v4.6-rc/omap-fixes-b' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.6/fixes ARM: OMAP2+: clockdomain: another fix for v4.6-rc For DRA7xx platforms, add a workaround for missed timer interrupts that appears to be due to an integration bug (erratum i874) Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/omap-fixes-b-for-v4.6-rc/20160413020850/ (The DRA7xx board here has not yet been added into the testbed.)
2016-04-13Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A batch of fixes for -rc4, for various platforms. Nothing really substantial and worth pointing out in particular; small fixes for various bugs, see shortlog for details" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: sa1100: remove references to the defunct handhelds.org bus: uniphier-system-bus: fix condition of overlap check ARM: uniphier: drop weird sizeof() ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type ARM: OMAP: Correct interrupt type for ARM TWD ARM: DRA722: Add ID detect for Silicon Rev 2.0 ARM: dts: am43xx: fix edma memcpy channel allocation ARM: dts: AM43x-epos: Fix clk parent for synctimer ARM: OMAP2: Fix up interconnect barrier initialization for DRA7 documentation: Fix pinctrl documentation for Meson8 / Meson8b ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b ARM: mvebu: Correct unit address for linksys bus: mvebu-mbus: use %pa to print phys_addr_t arm64: dts: vulcan: Update PCI ranges ARM: u8500_defconfig: turn on the Synaptics RMI4 driver ARM: pxa: fix the number of DMA requestor lines ARM: OMAP2+: hwmod: Fix updating of sysconfig register ARM: OMAP2+: Use srst_udelay for USB on dm814x
2016-04-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "ARM fixes: - Wrong indentation in the PMU code from the merge window - A long-time bug occuring with running ntpd on the host, candidate for stable - Properly handle (and warn about) the unsupported configuration of running on systems with less than 40 bits of PA space - More fixes to the PM and hotplug notifier stuff from the merge window x86: - leak of guest xcr0 (typically shows up as SIGILL) - new maintainer (who is sending the pull request too) - fix for merge window regression - fix for guest CPUID" Paolo Bonzini points out: "For the record, this tag is signed by me because I prepared the pull request. Further pull requests for 4.6 will be signed and sent out by Radim directly" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: mask CPUID(0xD,0x1).EAX against host value kvm: x86: do not leak guest xcr0 into host interrupt handlers KVM: MMU: fix permission_fault() KVM: new maintainer on the block arm64: KVM: unregister notifiers in hyp mode teardown path arm64: KVM: Warn when PARange is less than 40 bits KVM: arm/arm64: Handle forward time correction gracefully arm64: KVM: Add braces to multi-line if statement in virtual PMU code
2016-04-13ARM: mach-imx: sdhci-esdhc-imx: initialize DMA maskAlexander Kurz
With commit 7b91369b4655 ("mmc: sdhci: Set DMA mask when adding host") DMA access got disabled for device drivers with zero DMA mask property. sdhci-esdhc-imx got blocked from DMA access by this. Hence: initialize the DMA mask to enable access again. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-12Merge tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for 4.6 (part 1) - fix USB adress register for Linksys Armada 388 based boards - fix build warning in mvebu-mbus * tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Correct unit address for linksys bus: mvebu-mbus: use %pa to print phys_addr_t Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12ARM: sa1100: remove references to the defunct handhelds.orgLinus Walleij
The website handhelds.org has been down for a long time and is likely never coming back online. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12Merge tag 'pxa-fixes-v4.6' of https://github.com/rjarzmik/linux into fixesOlof Johansson
ARM: pxa: fixes for v4.6 There is only a single fix for dma requestor lines initial setup, triggered by dmaengine previous fix. * tag 'pxa-fixes-v4.6' of https://github.com/rjarzmik/linux: ARM: pxa: fix the number of DMA requestor lines Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12Merge tag 'omap-for-v4.6/fixes-rc1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps against v4.6-rc1. Mostly minor fixes for the newer SoCs with few board fixes and a fix for a long time hwmod bug: - Fix cpsw_emac0 link type for baltos-ir5221 - Fix interrupt type for TWD - Fix edma memcpy channel allocation for am43x - Fix am43x-epos sycntimer32k by using the correct assigned clock - Fix interconnect barrier for dra7 - Fix a long time hwmod bug for updating sysconfig register properly - Fix flakey booting on dm814x where USB reset needs a delay And there is one minor change that is not strictly a fix, but is good to have for proper hardware detection: - Detect dra7 silicon revision 2.0 properly * tag 'omap-for-v4.6/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type ARM: OMAP: Correct interrupt type for ARM TWD ARM: DRA722: Add ID detect for Silicon Rev 2.0 ARM: dts: am43xx: fix edma memcpy channel allocation ARM: dts: AM43x-epos: Fix clk parent for synctimer ARM: OMAP2: Fix up interconnect barrier initialization for DRA7 ARM: OMAP2+: hwmod: Fix updating of sysconfig register ARM: OMAP2+: Use srst_udelay for USB on dm814x Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12ARM: uniphier: drop weird sizeof()Masahiro Yamada
My intention was to ioremap a 4-byte register. Coincidentally enough, sizeof(SZ_4) equals to SZ_4, but this code is weird anyway. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-10Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A couple of small fixes, and wiring up the new syscalls which appeared during the merge window" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8550/1: protect idiv patching against undefined gcc behavior ARM: wire up preadv2 and pwritev2 syscalls ARM: SMP enable of cache maintanence broadcast
2016-04-10ARM: DRA7: clockdomain: Implement timer workaround for errata i874Keerthy
Errata Title: i874: TIMER5/6/7/8 interrupts not propagated Description: When TIMER5, TIMER6, TIMER7, or TIMER8 clocks are enabled (CM_IPU_TIMER5/6/7/8_CLKCTRL[0:1]MODULEMODE=0x2:ENABLE) and the CD-IPU is in HW_AUTO mode (CM_IPU_CLKSTCTRL[0:1]CLKTRCTRL=0x3:HW_AUTO) the corresponding TIMER will continue counting, but enabled interrupts will not be propagated to the destinations (MPU, DSP, etc) in the SoC until the TIMER registers are accessed from the CPUs (MPU, DSP etc.). This can result in missed timer interrupts. Workaround: In order for TIMER5/6/7/8 interrupts to be propagated and serviced correctly the CD_IPU domain should be set to SW_WKUP mode (CM_IPU_CLKSTCTRL[0:1]CLKTRCTRL=0x2:SW_WKUP). The above workaround is achieved by switching the IPU clockdomain flags from HWSUP_SWSUP to SWSUP only. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2016-04-08Merge tag 'meson8-dt-fix' of https://github.com/carlocaione/linux-meson into ↵Kevin Hilman
fixes With http://www.spinics.net/lists/devicetree/msg116771.html we split / refactor the pinctrl driver to have two different pinctrl devices for each bus on the Amlogic Meson8 / Meson8b SoCs. These are the missing patches for documentation and DT that weren't pulled into mainline with the driver changes. * tag 'meson8-dt-fix' of https://github.com/carlocaione/linux-meson: documentation: Fix pinctrl documentation for Meson8 / Meson8b ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b
2016-04-08Merge branch 'fixes-rc2' into omap-for-v4.6/fixesTony Lindgren
2016-04-08ARM: OMAP: Catch callers of revision information prior to it being populatedNishanth Menon
omap_rev is used to detect various SoC types, however any misuse of the usage by invoking it earlier than it being populated will result in invalid results. Lets flag them as early as possible to prevent unintended side effects taking place. We get 0 if it is uninitialized and -1 when detection is done using device tree (as the case was for DRA7 as the case was prior to commit 06c2d368fc36 ("ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls") Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-08ARM: dts: dra7: Correct clock tree for sys_32k_ckKeerthy
This is w.r.t J6/J6eco: 32clk is pseudo (erratum i856) - clock source. Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz external crystal is not enabled at power up. Instead the CPU falls back to using an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is usually 20MHz on boards so far (which gives an emulated frequency of 32.786KHz) Modelling the same in device tree. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-08ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tapNishanth Menon
When commit 06c2d368fc36 ("ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls") introduced SoC check using omap_revision, it missed providing DRA7 as class for initializing the omap_version variable. Without doing this, soc_is_dra7xx() will fail and as a result, omap4_pm_init_early never initializes the dra7 erratum for CPU power state. This causes the suspend path to fail on DRA7 devices. Fixes: 06c2d368fc36 ("ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls") Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-08ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgenNishanth Menon
DRA7 has no SAR region for automated save and restore of wakeupgen, which does not make real since the SoC really does not do legacy OFF mode anymore. Further wakeupgen should never loose context in CSWR retention mode for MPU domain on DRA7 since that is the deepest state we will enter. So, just skip, instead of oopsing as follows while attemptint to enter suspend on BeagleBoard-X15. [ 55.589771] Unable to handle kernel paging request at virtual address 00002684 [ 55.589771] pgd = ec69c000 [...] [ 55.589771] [<c0123cc8>] (irq_notifier) from [<c015ad70>] (notifier_call_chain+0x4c/0x8c) [ 55.589771] [<c015ad70>] (notifier_call_chain) from [<c021469c>] (cpu_cluster_pm_enter+0x2c/0x78) [ 55.589771] [<c021469c>] (cpu_cluster_pm_enter) from [<c0514508>] (syscore_suspend+0xb8/0x31c) [ 55.589771] [<c0514508>] (syscore_suspend) from [<c0197d24>] (suspend_devices_and_enter+0x308/0x9e4) [ 55.589771] [<c0197d24>] (suspend_devices_and_enter) from [<c0198a40>] (pm_suspend+0x640/0x75c) [ 55.589771] [<c0198a40>] (pm_suspend) from [<c0196bcc>] (state_store+0x64/0xb8) [ 55.589771] [<c0196bcc>] (state_store) from [<c0307914>] (kernfs_fop_write+0xc0/0x1bc) [ 55.589771] [<c0307914>] (kernfs_fop_write) from [<c028ac80>] (__vfs_write+0x1c/0xd8) [ 55.589771] [<c028ac80>] (__vfs_write) from [<c028bb70>] (vfs_write+0x90/0x16c) [ 55.589771] [<c028bb70>] (vfs_write) from [<c028c890>] (SyS_write+0x44/0x9c) [ 55.589771] [<c028c890>] (SyS_write) from [<c0107840>] (ret_fast_syscall+0x0/0x1c) [...] Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-08Merge tag 'kvm-arm-for-4.6-rc4' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM Fixes for v4.6-rc4 Addresses: - Wrong indentation in the PMU code from the merge window - A long-time bug occuring with running ntpd on the host, candidate for stable - Properly handle (and warn about) the unsupported configuration of running on systems with less than 40 bits of PA space - More fixes to the PM and hotplug notifier stuff from the merge window
2016-04-07ARM: 8550/1: protect idiv patching against undefined gcc behaviorNicolas Pitre
It was reported that a kernel with CONFIG_ARM_PATCH_IDIV=y stopped booting when compiled with the upcoming gcc 6. Turns out that turning a function address into a writable array is undefined and gcc 6 decided it was OK to omit the store to the first word of the function while still preserving the store to the second word. Even though gcc 6 is now fixed to behave more coherently, it is a mystery that gcc 4 and gcc 5 actually produce wanted code in the kernel. And in fact the reduced test case to illustrate the issue does indeed break with gcc < 6 as well. In any case, let's guard the kernel against undefined compiler behavior by hiding the nature of the array location as suggested by gcc developers. Reference: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70128 Signed-off-by: Nicolas Pitre <nico@linaro.org> Reported-by: Marcin Juszkiewicz <mjuszkiewicz@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org # v4.5 Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-07ARM: wire up preadv2 and pwritev2 syscallsRussell King
Wire up the preadv2 and pwritev2 syscalls for ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-06arm64: KVM: unregister notifiers in hyp mode teardown pathSudeep Holla
Commit 1e947bad0b63 ("arm64: KVM: Skip HYP setup when already running in HYP") re-organized the hyp init code and ended up leaving the CPU hotplug and PM notifier even if hyp mode initialization fails. Since KVM is not yet supported with ACPI, the above mentioned commit breaks CPU hotplug in ACPI boot. This patch fixes teardown_hyp_mode to properly unregister both CPU hotplug and PM notifiers in the teardown path. Fixes: 1e947bad0b63 ("arm64: KVM: Skip HYP setup when already running in HYP") Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-04-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Miscellaneous bugfixes. The ARM and s390 fixes are for new regressions from the merge window, others are usual stable material" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: compiler-gcc: disable -ftracer for __noclone functions kvm: x86: make lapic hrtimer pinned s390/mm/kvm: fix mis-merge in gmap handling kvm: set page dirty only if page has been writable KVM: x86: reduce default value of halt_poll_ns parameter KVM: Hyper-V: do not do hypercall userspace exits if SynIC is disabled KVM: x86: Inject pending interrupt even if pending nmi exist arm64: KVM: Register CPU notifiers when the kernel runs at HYP arm64: kvm: 4.6-rc1: Fix VTCR_EL2 VS setting
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-02Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node"Andy Gross
Revert this commit to fix regressions on non-dragonboard MSM8974 boards. This will be put back in after the correct fixes to the bam driver are accepted that allow remote processor control of the main control registers. This reverts commit 0a5d0f85bba61d8643d78869c7c4214d6c2a7ce6. Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-02Revert "dts: msm8974: Add blsp2_bam dma node"Andy Gross
Revert this commit to fix regressions on non-dragonboard MSM8974 boards. This will be put back in after the correct fixes to the bam driver are accepted that allow remote processor control of the main control registers. This reverts commit 62bc8179222372624fd8a52b88327b962614d7b2. Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-01ARM: SMP enable of cache maintanence broadcastRussell King
Masahiro Yamada reports that we can fail to set the FW bit in the auxiliary control register, which enables broadcasting the cache maintanence operations. This occurs because we only check that the SMP/nAMP bit is set, rather than checking whether all the bits we want to be set are set. Rearrange the code to ensure that all desired bits are set, and only update the register if we discover some required bits are not set. Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31arm64: KVM: Register CPU notifiers when the kernel runs at HYPJames Morse
When the kernel is running at EL2, it doesn't need init_hyp_mode() to configure page tables for HYP. This function also registers the CPU hotplug and lower power notifiers that cause HYP to be re-initialised after the CPU has been reset. To avoid losing the register state that controls stage2 translation, move the registering of these notifiers into init_subsystems(), and add a is_kernel_in_hyp_mode() path to each callback. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Fixes: 1e947bad0b6 ("arm64: KVM: Skip HYP setup when already running in HYP") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-03-30ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link typeYegor Yefremov
In Baltos iR5221 cpsw_emac0 is connected directly to the switch IC and hence needs to be configured as "fixed-link". Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30ARM: OMAP: Correct interrupt type for ARM TWDJon Hunter
The ARM TWD interrupt is a private peripheral interrupt (PPI) and per the ARM GIC documentation, whether the type for PPIs can be set is IMPLEMENTATION DEFINED. For OMAP4 devices the PPI type cannot be set and so when we attempt to set the type for the ARM TWD interrupt it fails. This has done unnoticed because it fails silently and because we cannot re-configure the type it has had no impact. Nevertheless fix the type for the TWD interrupt so that it matches the hardware configuration. Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30ARM: DRA722: Add ID detect for Silicon Rev 2.0Vishal Mahaveer
Silicon Rev 2.0 is a minor variant of Rev 1.0. Rev 2.0 is an incremental revision with various fixes including the following: - Reset logic fixes - Few asymmetric aging logic fixes - Ethernet speed fixes - EDMA fixes for McASP Signed-off-by: Vishal Mahaveer <vishalm@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30ARM: dts: am43xx: fix edma memcpy channel allocationTero Kristo
EDMA was allocating DMA channels 32 and 33 for memcpy usage, out of which channel 33 is actually used by DES crypto engine. This bad allocation of the channel causes a crash in the DES crypto engine, as the channel gets configured for memcpy usage instead of hardware <-> memory DMA. Fixed by allocating DMA channels 58 and 59 for memcpy usage (I2C0 RX/TX), which are not used by anybody. Fixes: cce1ee000187 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Tero Kristo <t-kristo@ti.com> Suggested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-03-19 11:50:30 +0000