| Age | Commit message (Collapse) | Author |
|---|
|
Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.
As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"
* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Uprobes:
- Add BPF session support (Jiri Olsa)
- Switch to RCU Tasks Trace flavor for better performance (Andrii
Nakryiko)
- Massively increase uretprobe SMP scalability by SRCU-protecting
the uretprobe lifetime (Andrii Nakryiko)
- Kill xol_area->slot_count (Oleg Nesterov)
Core facilities:
- Implement targeted high-frequency profiling by adding the ability
for an event to "pause" or "resume" AUX area tracing (Adrian
Hunter)
VM profiling/sampling:
- Correct perf sampling with guest VMs (Colton Lewis)
New hardware support:
- x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi)
Misc fixes and enhancements:
- x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter)
- x86/amd: Warn only on new bits set (Breno Leitao)
- x86/amd/uncore: Avoid a false positive warning about snprintf
truncation in amd_uncore_umc_ctx_init (Jean Delvare)
- uprobes: Re-order struct uprobe_task to save some space
(Christophe JAILLET)
- x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang)
- x86/rapl: Clean up cpumask and hotplug (Kan Liang)
- uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg
Nesterov)"
* tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/core: Correct perf sampling with guest VMs
perf/x86: Refactor misc flag assignments
perf/powerpc: Use perf_arch_instruction_pointer()
perf/core: Hoist perf_instruction_pointer() and perf_misc_flags()
perf/arm: Drop unused functions
uprobes: Re-order struct uprobe_task to save some space
perf/x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init
perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling
perf/x86/intel/pt: Add support for pause / resume
perf/core: Add aux_pause, aux_resume, aux_start_paused
perf/x86/intel/pt: Fix buffer full but size is 0 case
uprobes: SRCU-protect uretprobe lifetime (with timeout)
uprobes: allow put_uprobe() from non-sleepable softirq context
perf/x86/rapl: Clean up cpumask and hotplug
perf/x86/rapl: Move the pmu allocation out of CPU hotplug
uprobe: Add support for session consumer
uprobe: Add data pointer to consumer handlers
perf/x86/amd: Warn only on new bits set
uprobes: fold xol_take_insn_slot() into xol_get_insn_slot()
uprobes: kill xol_area->slot_count
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
|
|
property
Remove "pl022,slave-tx-disable" property which is both unused in the kernel
and undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241115193835.3623725-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner fixes for 6.12
- Fix DCDC5 voltage range on Cubieboard 4
* tag 'sunxi-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
|
|
Pull xattr updates from Al Viro:
"Sanitize xattr and io_uring interactions with it, add *xattrat()
syscalls, sanitize struct filename handling in there"
* tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr: remove redundant check on variable err
fs/xattr: add *at family syscalls
new helpers: file_removexattr(), filename_removexattr()
new helpers: file_listxattr(), filename_listxattr()
replace do_getxattr() with saner helpers.
replace do_setxattr() with saner helpers.
new helper: import_xattr_name()
fs: rename struct xattr_ctx to kernel_xattr_ctx
xattr: switch to CLASS(fd)
io_[gs]etxattr_prep(): just use getname()
io_uring: IORING_OP_F[GS]ETXATTR is fine with REQ_F_FIXED_FILE
getname_maybe_null() - the third variant of pathname copy-in
teach filename_lookup() to treat NULL filename as ""
|
|
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. All singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ocfs2: uncache inode which has failed entering the group
mm: fix NULL pointer dereference in alloc_pages_bulk_noprof
mm, doc: update read_ahead_kb for MADV_HUGEPAGE
fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args()
sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
mm/mremap: fix address wraparound in move_page_tables()
tools/mm: fix compile error
mm, swap: fix allocation and scanning race with swapoff
|
|
Pull ARM fixes from Russell King:
- Fix kernel mapping for XIP kernels
- Fix SMP support for XIP kernels
- Fix complication corner case with CFI
- Fix a typo in nommu code
- Fix cacheflush syscall when PAN is enabled on LPAE platforms
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: fix cacheflush with PAN
ARM: 9435/1: ARM/nommu: Fix typo "absence"
ARM: 9434/1: cfi: Fix compilation corner case
ARM: 9420/1: smp: Fix SMP for xip kernels
ARM: 9419/1: mm: Fix kernel memory mapping for xip kernels
|
|
The CRC-T10DIF algorithm produces a 16-bit CRC, and this is reflected in
the folding coefficients, which are also only 16 bits wide.
This means that the polynomial multiplications involving these
coefficients can be performed using 8-bit long polynomial multiplication
(8x8 -> 16) in only a few steps, and this is an instruction that is part
of the base NEON ISA, which is all most real ARMv7 cores implement. (The
64-bit PMULL instruction is part of the crypto extensions, which are
only implemented by 64-bit cores)
The final reduction is a bit more involved, but we can delegate that to
the generic CRC-T10DIF implementation after folding the entire input
into a 16 byte vector.
This results in a speedup of around 6.6x on Cortex-A72 running in 32-bit
mode. On Cortex-A8 (BeagleBone White), the results are substantially
better than that, but not sufficiently reproducible (with tcrypt) to
quote a number here.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To allow an alternative version to be created of the PMULL based
CRC-T10DIF algorithm, turn the bulk of it into a macro, except for the
final reduction, which will only be used by the existing version.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using Open Firmware.
On these machines, the kernel refuses to boot from non-zero
PHYSICAL_START, which occurs when CRASH_DUMP is on.
Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should
default to off for them. Users booting via some other mechanism can still
turn it on explicitly.
Does not change the default on any other architectures for the
time being.
Link: https://lkml.kernel.org/r/20240917163720.1644584-1-dave@vasilevsky.ca
Fixes: 75bc255a7444 ("crash: clean up kdump related config items")
Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca>
Reported-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Closes: https://lists.debian.org/debian-powerpc/2024/07/msg00001.html
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For ARM's implementation, perf_instruction_pointer() and
perf_misc_flags() are equivalent to the generic versions in
include/linux/perf_event.h so arch/arm doesn't need to provide its
own versions. Drop them here.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-2-coltonlewis@google.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.13
It contains:
- device tree support for the Microchip SAM9X7 SoC and the Microchip
SAM9X75 Curiosity board
- enable power monitor support for SAM9X60-EK, SAMA5D2-ICP,
SAMA7G45 Curiosity, SAMA7G5-EK boards
- updates the uart nodes with missing properties
- device tree cleanups
* tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board
dt-bindings: arm: add sam9x75 curiosity board
ARM: dts: at91: sam9x7: add device tree for SoC
ARM: dts: microchip: Rename LED sub nodes name
ARM: dts: microchip: Rename the pmic node
ARM: dts: microchip: Rename the eeprom nodename
ARM: dts: microchip: sama7g5ek: Add power monitor support
ARM: dts: microchip: sama7g54_curiosity: Add power monitor support
ARM: dts: microchip: sama5d2_icp: Add power monitor support
ARM: dts: microchip: sam9x60ek: Add power monitor support
ARM: dts: microchip: Unify rng node names
ARM: dts: microchip: Add trng labels for all at91 SoCs
ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode
Link: https://lore.kernel.org/r/20241113182050.2176500-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
It seems that the cacheflush syscall got broken when PAN for LPAE was
implemented. User access was not enabled around the cache maintenance
instructions, causing them to fault.
Fixes: 7af5b901e847 ("ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement")
Reported-by: Michał Pecio <michal.pecio@gmail.com>
Tested-by: Michał Pecio <michal.pecio@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
There is a spelling mistake of 'absense' in comments which
should be 'absence'.
Link: https://lore.kernel.org/all/fca25741-c89f-43ea-95af-5e3232d513fc@arm.com/
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
When enabling expert mode CONFIG_EXPERT and using that power
user mode to disable the branch prediction hardening
!CONFIG_HARDEN_BRANCH_PREDICTOR, the assembly linker
in CLANG notices that some assembly in proc-v7.S does
not have corresponding C call sites, i.e. the prototypes
in proc-v7-bugs.c are enclosed in ifdef
CONFIG_HARDEN_BRANCH_PREDICTOR so this assembly:
SYM_TYPED_FUNC_START(cpu_v7_smc_switch_mm)
SYM_TYPED_FUNC_START(cpu_v7_hvc_switch_mm)
Results in:
ld.lld: error: undefined symbol: __kcfi_typeid_cpu_v7_smc_switch_mm
>>> referenced by proc-v7.S:94 (.../arch/arm/mm/proc-v7.S:94)
>>> arch/arm/mm/proc-v7.o:(.text+0x108) in archive vmlinux.a
ld.lld: error: undefined symbol: __kcfi_typeid_cpu_v7_hvc_switch_mm
>>> referenced by proc-v7.S:105 (.../arch/arm/mm/proc-v7.S:105)
>>> arch/arm/mm/proc-v7.o:(.text+0x124) in archive vmlinux.a
Fix this by adding an additional requirement that
CONFIG_HARDEN_BRANCH_PREDICTOR has to be enabled to compile
these assembly calls.
Closes: https://lore.kernel.org/oe-kbuild-all/202411041456.ZsoEiD7T-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Fixed-regulator nowadays has preferred node-naming scheme set in the
binding. This gets all boards on the same state for Rockchip arm32-dts.
* tag 'v6.13-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: adapt regulator nodenames to preferred form
ARM: dts: rockchip: Add Relfor Saib board
dt-bindings: arm: rockchip: Add Relfor Saib board
dt-bindings: vendor-prefixes: Add Relfor labs
ARM: dts: rockchip: Add watchdog node for RV1126
dt-bindings: watchdog: rockchip: Add rockchip,rv1126-wdt string
Link: https://lore.kernel.org/r/6740039.4vTCxPXJkl@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.13 part 2
- Remove accidental suniv duplicates in Makefile
- Add second source magnetometer for Pine Phone
- Add orientation (mount matrix) for Pine Phone's accelerometer and
magnetometer
- Enable eMMC and MMC on A100 Perf1
* tag 'sunxi-dt-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
arm64: dts: sun50i-a64-pinephone: Add mount-matrix for PinePhone magnetometers
arm64: dts: sun50i-a64-pinephone: Add AF8133J to PinePhone
ARM: dts: allwinner: Remove accidental suniv duplicates
arm64: allwinner: a100: Add MMC related nodes
arm64: dts: allwinner: a100: add usb related nodes
dt-bindings: usb: sunxi-musb: Add A100 compatible string
dt-bindings: usb: Add A100 compatible string
dt-bindings: phy: sun50i-a64: add a100 compatible
arm64: dts: allwinner: a100: add watchdog node
arm64: dts: allwinner: A100: Add PMU mode
ARM: dts: sunxi: add support for RerVision A33-Vstar board
dt-bindings: arm: sunxi: document RerVision A33-Vstar board
arm64: dts: allwinner: Add disable-wp for boards with micro SD card
arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported boards
arm64: dts: allwinner: h616: Add audio codec node
Link: https://lore.kernel.org/r/ZzC-OF57MT_yCeWH@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.13 (part 1)
turris-omnia: prepare device tree for LED brightness change detection
kirkwood: fix at24 EEPROM node name
* tag 'mvebu-dt-6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: Add global LED brightness change interrupt
ARM: dts: marvell: kirkwood: Fix at24 EEPROM node name
Link: https://lore.kernel.org/r/87bjyq83x0.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.13, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- ST DK board:
- Add support of WLAN/BT Murata Type 1DX module.
- DH SOM:
- Add M24256E EEPROM suport.
- STMP32MP15:
- Use IWDG2 as wakeup source.
- Add support of WLAN/BT Murata Type 1DX module on DK2 board.
- STM32MP25:
- Enable RTC.
- Add DMA support for U(S)ART, I2C and SPI instances.
* tag 'stm32-dt-for-v6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: add DMA support on SPI instances of stm32mp25
arm64: dts: st: add DMA support on I2C instances of stm32mp25
arm64: dts: st: add DMA support on U(S)ART instances of stm32mp25
arm64: dts: st: add RNG node on stm32mp251
arm64: dts: st: enable RTC on stm32mp257f-ev1 board
arm64: dts: st: add RTC on stm32mp25x
ARM: dts: stm32: add support of WLAN/BT on stm32mp135f-dk
ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2
ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp135f-dk
ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp157c-dk2
ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp13
ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp15
ARM: dts: stm32: Describe M24256E write-lockable page in DH STM32MP13xx DHCOR SoM DT
ARM: dts: stm32: Add IWDG2 EXTI interrupt mapping and mark as wakeup source
Link: https://lore.kernel.org/r/92d2d6df-cc5c-488f-8ebd-550b1903db12@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT changes for v6.13:
- DT fixes to pass bindings chedk, including:
- fixing nodes names
- dropping meson6 ATV1200 board
- add missing properties
* tag 'amlogic-arm-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: amlogic: meson8/8b: remove invalid pinctrl reg
ARM: dts: amlogic: meson8b-ec100: add missing gpio-line-names entry
ARM: dts: amlogic: meson8b-ec100: add missing clocks property in sound card
ARM: dts: amlogic: meson8-minix-neo-x8: fix invalid pnictrl-names
ARM: dts: amlogic: add missing phy-mode in ethmac node
ARM: dts: amlogic: meson8: use correct pinctrl bank node name
ARM: dts: amlogic: fix /memory node name
ARM: dts: amlogic: meson8b-odroidc1: fix invalid reset-gpio
ARM: dts: amlogic: meson6: remove support for ATV1200 board
ARM: dts: amlogic: meson8: fix ao_arc_sram node name
ARM: dts: amlogic: meson8: fix soc thermal-zone node name
ARM: dts: amlogic: meson6: fix clk81 node name
Link: https://lore.kernel.org/r/ffaa3755-8c5d-4fc3-86bf-9129d3889bff@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree changes for v6.13
Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G,
X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride"
development boards thereon, and the SM7325 platform and the Nothing
Phone 1.
MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for
volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi
calibration variant.
On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while
the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2
enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins
are adjusted and PMU nodes' compatibles for the two clusters are
corrected.
The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to
DeviceTree overlays, and both gains CMA heap for libcamera to use.
SA8775P gains GPI DMA support, support for controlling download mode
(bootloader-assisted ramdump support), additional UARTs, and qcrypto
support. The "Ride" development board gains WiFi and Bluetooth support.
On SC8280XP (8cx Gen3) another UART is described, used in the
Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit
is described on the CRD and Lenovo ThinkPad X13s.
On SDM630/660 the GPU SMMU and clock controller is added, as is the
A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and
WiFi is then enabled on the Inforce 6560 development board.
On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable
WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC
controller, to enable hotplug.
On X Elite, USB Type-C controllers are marked as usb-role-switch
capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and
wired up to allow setting and cleaning the download mode
(bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are
updated.
USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook
S15. The T14s also gains support for a second source trackpad. The
Microsoft Surface Laptop gains LID switch and the USB Type-A connector
attached to the multiport controller is enabled. The CRD has its HID
device power supplies described.
Application SMMU is flagged as DMA coherent across QDU1000, SC7180,
SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100.
In addition to this, the effort to improve style and binding compliance
continued.
* tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Drop redundant clock-lanes from camera@1a
arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo
arm64: dts: qcom: sm8450-hdk: model the PMU of the on-board wcn6855
arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
arm64: dts: qcom: sc8280xp-crd: enable bluetooth
arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855
arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards
dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3
arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers
arm64: dts: qcom: x1e80100-crd: describe HID supplies
arm64: dts: qcom: msm8998-lenovo-miix-630: add WiFi calibration variant
arm64: dts: qcom: msm8998-clamshell: enable resin/VolDown
arm64: dts: qcom: msm8998-lenovo-miix-630: enable VolumeUp button
arm64: dts: qcom: msm8998-lenovo-miix-630: enable aDSP and SLPI
arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreen
arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
...
Link: https://lore.kernel.org/r/20241105164901.7787-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
ARM: dts: OMAP updates for v6.13
Misc. minor updates for OMAP3, OMAP4, AM3 and DRA7 platforms.
* tag 'omap-for-v6.13/dt-signed-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: omap4-kc1: fix twl6030 power node
ARM: dts: am335x-bone-common: Increase MDIO reset deassert delay to 50ms
ARM: dts: ti/omap: omap4-epson-embt2ws: add charger
ARM: dts: omap36xx: declare 1GHz OPP as turbo again
ARM: ti/omap: omap3-gta04a5: add Bluetooth
ARM: dts: ti/omap: dra7: fix redundant clock divider definition
ARM: dts: ti/omap: use standard node name for twl4030 charger
ARM: dts: omap: omap4-epson-embt2ws: add GPIO expander
ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
ARM: dts: ti: dra7: Remove double include of clock bindings
ARM: dts: ti: omap3434-sdp: drop linux,mtd-name from onenand node
ARM: dts: ti: omap: am335x-baltos: drop "gpmc,device-nand" from NAND node
ARM: dts: ti: drop linux,mtd-name from NAND nodes
ARM: dts: ti/omap: Fix at24 EEPROM node names
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13 (take two)
- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
arm64: dts: renesas: r9a08g045: Add RTC node
arm64: dts: renesas: r9a08g045: Add VBATTB node
arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQ
ARM: dts: renesas: r7s72100: Add DMA support to MMCIF
ARM: dts: renesas: r7s72100: Add DMAC node
arm64: dts: renesas: hihope: Drop #sound-dai-cells
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
arm64: dts: renesas: r9a09g057: Add OPP table
Link: https://lore.kernel.org/r/cover.1730726155.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.13:
- New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM
SoM on PDK2 carrier
- A bunch of dt-schema warning fixes from Fabio Estevam
- A set of changes from Hiago De Franco to update audio card for Apalis
and Colibri devices
- A series from Marek Vasut to improve pin config nodes according to
bindings
- A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL
UART ports
- Other small and random changes
* tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (39 commits)
ARM: dts: imx: Add devicetree for Kobo Clara 2E
ARM: dts: imx6sll: Improve gpc description
ARM: dts: imx6sl: Pass tempmon #thermal-sensor-cells
ARM: dts: imx6sx: Fix tempmon description
ARM: dts: imx6sll: Remove regulator-3p0 unit address
ARM: dts: imx6sll: Fix the last SPDIF clock name
ARM: dts: imx7ulp: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl: Remove incorrect mmc fallback compatible
ARM: dts: imx6sx: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl/sll: Add the "fsl,imx6dl-gpt" fallback
ARM: dts: imx6ul: Drop duplicate space in iomux node groups
ARM: dts: imx6sx: Align pin config nodes with bindings
ARM: dts: imx6sl: imx6sll: Align pin config nodes with bindings
ARM: dts: imx6qp: Align pin config nodes with bindings
ARM: dts: imx6qdl: Align pin config nodes with bindings
ARM: dts: imx6q: Align pin config nodes with bindings
ARM: dts: imx6dl: Align pin config nodes with bindings
ARM: dts: imx53: Align pin config nodes with bindings
ARM: dts: imx51: Align pin config nodes with bindings
ARM: dts: imx50: Align pin config nodes with bindings
...
Link: https://lore.kernel.org/r/20241104090055.1881860-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.13
IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65
PCIe EP controllers gain missing linux,pci-domain properties.
Stylistic improvements across a range of platforms and devices.
* tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: ipq4019: use nvmem-layout
ARM: dts: qcom: change labels to lower-case
ARM: dts: qcom: sdx65: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: minor whitespace cleanup
ARM: dts: qcom: drop underscore in node names
Link: https://lore.kernel.org/r/20241104034744.14378-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.13
- Fix dts warning for at24 EEPROM node names
* tag 'socfpga_dts_updates_for_v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Fix at24 EEPROM node names
Link: https://lore.kernel.org/r/20241101190046.912598-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt
Ux500 DTS file updates for the v6.13 kernel cycle:
- Add touchkeys to the Samsung Codina variants
- Re-work the Codina device tree for eMMC
* tag 'ux500-dts-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Reconfigure the MC2 eMMC interface
ARM: dts: ux500: Add touchkeys to Codinas
Link: https://lore.kernel.org/r/CACRpkda5rix2JLYpexXTeGqKBcHeWxZx7A49jYCCmDPU7CFLSA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (53 commits)
arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
arm64: dts: renesas: Use interrupts-extended for WLAN
arm64: dts: renesas: Use interrupts-extended for video decoders
arm64: dts: renesas: Use interrupts-extended for USB muxes
arm64: dts: renesas: Use interrupts-extended for PMICs
arm64: dts: renesas: Use interrupts-extended for I/O expanders
arm64: dts: renesas: Use interrupts-extended for HDMI bridges
arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
ARM: dts: renesas: Use interrupts-extended for video decoders
ARM: dts: renesas: Use interrupts-extended for touchpanels
ARM: dts: renesas: Use interrupts-extended for PMICs
ARM: dts: renesas: Use interrupts-extended for HDMI bridges
ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix the physical address calculation of the following to get smp working
on xip kernels.
- secondary_data needed for secondary cpu bootup.
- secondary_startup address passed through psci.
- identity mapped code region needed for enabling mmu for secondary cpus.
Signed-off-by: Harith George <harith.g@alifsemi.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The patchset introducing kernel_sec_start/end variables to separate the
kernel/lowmem memory mappings, broke the mapping of the kernel memory
for xipkernels.
kernel_sec_start/end variables are in RO area before the MMU is switched
on for xipkernels.
So these cannot be set early in boot in head.S. Fix this by setting these
after MMU is switched on.
xipkernels need two different mappings for kernel text (starting at
CONFIG_XIP_PHYS_ADDR) and data (starting at CONFIG_PHYS_OFFSET).
Also, move the kernel code mapping from devicemaps_init() to map_kernel().
Fixes: a91da5457085 ("ARM: 9089/1: Define kernel physical section start and end")
Signed-off-by: Harith George <harith.g@alifsemi.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/cfc3cfe1-086b-48f1-9b89-f17c9391d3cc@gmail.com
[Also include the backlight-regulator and panel-regulator from
rk3288-veyron-edp, and adapt the Pinky device accordingly]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the four syscalls setxattrat(), getxattrat(), listxattrat() and
removexattrat(). Those can be used to operate on extended attributes,
especially security related ones, either relative to a pinned directory
or on a file descriptor without read access, avoiding a
/proc/<pid>/fd/<fd> detour, requiring a mounted procfs.
One use case will be setfiles(8) setting SELinux file contexts
("security.selinux") without race conditions and without a file
descriptor opened with read access requiring SELinux read permission.
Use the do_{name}at() pattern from fs/open.c.
Pass the value of the extended attribute, its length, and for
setxattrat(2) the command (XATTR_CREATE or XATTR_REPLACE) via an added
struct xattr_args to not exceed six syscall arguments and not
merging the AT_* and XATTR_* flags.
[AV: fixes by Christian Brauner folded in, the entire thing rebased on
top of {filename,file}_...xattr() primitives, treatment of empty
pathnames regularized. As the result, AT_EMPTY_PATH+NULL handling
is cheap, so f...(2) can use it]
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Link: https://lore.kernel.org/r/20240426162042.191916-1-cgoettsche@seltendoof.de
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
CC: x86@kernel.org
CC: linux-alpha@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-ia64@vger.kernel.org
CC: linux-m68k@lists.linux-m68k.org
CC: linux-mips@vger.kernel.org
CC: linux-parisc@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-s390@vger.kernel.org
CC: linux-sh@vger.kernel.org
CC: sparclinux@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: audit@vger.kernel.org
CC: linux-arch@vger.kernel.org
CC: linux-api@vger.kernel.org
CC: linux-security-module@vger.kernel.org
CC: selinux@vger.kernel.org
[brauner: slight tweaks]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Allwinner suniv boards' DT files were accidentally duplicated
in the Makefile when they were moved to the new directory
structure. Remove these duplicates for code cleanness.
Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241104230628.3736186-1-csokas.bence@prolan.hu
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add device tree file for sam9x75 curiosity board.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Link: https://lore.kernel.org/r/20241010120444.93252-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add device tree file for SAM9X7 SoC family.
Co-developed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20241010120432.93151-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
dtbs_check was moaning about twl6030-power, use the standard property
instead.
Apparently that twl6030 power snippet slipped in without the
corresponding driver. Now it is handled by the standard property.
CC: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Link: https://lore.kernel.org/r/20240915193527.1071792-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Commit b9bf5612610aa7e3 ("ARM: dts: am335x-bone-common: Increase MDIO
reset deassert time") already increased the MDIO reset deassert delay
from 6.5 to 13 ms, but this may still cause Ethernet PHY probe failures:
SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5
On BeagleBone Black Rev. C3, ETH_RESETn is controlled by an open-drain
AND gate. It is pulled high by a 10K resistor, and has a 4.7µF
capacitor to ground, giving an RC time constant of 47ms. As it takes
0.7RC to charge the capacitor above the threshold voltage of a CMOS
input (VDD/2), the delay should be at least 33ms. Considering the
typical tolerance of 20% on capacitors, 40ms would be safer. Add an
additional safety margin and settle for 50ms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/9002a58daa1b2983f39815b748ee9d2f8dcc4829.1730366936.git.geert+renesas@glider.be
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
When global LED brightness is changed by pressing the front button on
Turris Omnia, the MCU can produce an interrupt to the CPU. Add the
description of this interrupt to the LED controller node.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Adds a devicetree for the Kobo Clara 2E Ebook reader. It is based
on boards marked with "37NB-E60K2M+4A2" or "37NB-E60K2M+4B0". It is
equipped with an i.MX6SLL SoC.
Expected to work:
- Buttons
- Wifi
- Bluetooth
(if Wifi is initialized first, driver does not handle regulators
yet)
- LED
- uSD
- USB
- RTC
- Touchscreen
Add human-readable comments for devices without mainlined driver and
binding. Such comments can e.g. be help to find testers if someone
starts to work on the missing drivers.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DMA properties to the device node for the MMC Host Interface.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241015224801.2535-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
