| Age | Commit message (Collapse) | Author |
|---|
|
Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The only missing configuration option preventing us from using
multi_v7_defconfig with the Raspberry Pi 4 is ARM_LPAE. It's needed as
the PCIe controller found on the SoC depends on 64bit addressing, yet
can't be included as not all v7 boards support LPAE.
Introduce multi_v7_lpae_defconfig, built off multi_v7_defconfig, which will
avoid us having to duplicate and maintain multiple similar configurations.
Needless to say the Raspberry Pi 4 is not the only platform that can
benefit from this new configuration.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230124110213.3221264-11-alexander.stein@ew.tq-group.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable drivers used on TQMLS102xA + MBLS1021A.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230124110213.3221264-9-alexander.stein@ew.tq-group.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Missed a digit in the PCA9849 compatible string.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Fixes: 65b697e5dec7 ("ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree")
Link: https://lore.kernel.org/r/20220826194457.164492-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230118051736.246714-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This converts the EP93xx to use GPIO descriptors for the
LEDs.
Cc: Nikita Shubin <nikita.shubin@maquefel.me>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Lukasz Majewski <lukma@denx.de>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230111132210.134478-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
One clean-up for omap1 for v6.3
One non-urgent change to use platform_device_put() instead of
platform_device_unregister().
* tag 'omap-for-v6.3/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
Link: https://lore.kernel.org/r/pull-1674566532-427457@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
Clean-up for omaps for v6.3
Non-urgent fixes for missing of_node_put() and clk_put(), drop few
unnecessary includes, and fix a typo. None of these are urgent and
can be merged along with other clean-up when suitable.
* tag 'omap-for-v6.3/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix spelling typos in comment
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/machine.h>
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/pinmux.h>
ARM: OMAP2+: Fix memory leak in realtime_counter_init()
ARM: OMAP2+: omap4-common: Fix refcount leak bug
Link: https://lore.kernel.org/r/pull-1674566471-434733@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree related changes for omaps for v6.3
Updates for am335x-nano, n900, and gta04 for the connected peripherals.
Also few corrections for node names.
* tag 'omap-for-v6.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap: gta04a5: cleanup i2c node names
ARM: dts: omap: gta04: add BNO055 IMU chip
ARM: dts: n900: use iio driver for accelerometer
ARM: dts: n900: rename accelerometer node
ARM: dts: am335x-nano: Enable USB host
ARM: dts: am335x-nano: Fix GPIO settings for MMC pins
ARM: dts: am335x-nano: Enable I2C temperature sensor
ARM: dts: am335x-nano: Enable RS485 mode for UART3 & 4
ARM: dts: am335x-nano: Fix GPIO settings for RTS/CTS pins on UART3 & 4
ARM: dts: ti: Fix pca954x i2c-mux node names
ARM: dts: omap: Use new media bus type macros
Link: https://lore.kernel.org/r/pull-1674566471-434733@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 device tree updates for 6.3:
It contains:
- the addition of XISC (eXtended Image Sensor Controller) and CSI2DC (csi2
demux controller) available in SAMA7G5
* tag 'at91-dt-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5: add nodes for video capture
Link: https://lore.kernel.org/r/20230119112903.43257-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.3
- Enable support for the Renesas RZ/G2L MIPI DSI, CSI-2, and Camera
Receiving Unit drivers in the arm64 defconfig,
- Refresh shmobile_defconfig for v6.1-rc5.
* tag 'renesas-arm-defconfig-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable RZ/G2L MIPI CSI-2 and CRU support
ARM: shmobile: defconfig: Refresh for v6.1-rc5
arm64: defconfig: Enable Renesas RZ/G2L MIPI DSI driver
Link: https://lore.kernel.org/r/cover.1673702289.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A GPIO based I2C bus is used by at least some Atmel reference boards,
including the AT91SAM9G20-EK which is in CI, enable the driver as a
module to improve test coverage and help users of systems that happen to
use it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230109-arm-multi-v5-i2c-gpio-v1-1-78e191358548@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The wm896x series of audio CODECs is used on a number of Freescale
reference designs, enable the drivers in multi_v7_defconfig to improve
testing coverage of those systems and their derivatives.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230106-arm-wm896x-v1-1-441c564a9cd1@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Samsung Galaxy S5 (SM-G900H) was sold alongside Samsung Galaxy S5
with Snapdragon SoC, however the Exynos version features a 3G
capable Intel modem instead of Qualcomm version featuring LTE modem.
This phone is based on Exynos5422. Currently, the touchscreen,
USB, eMMC and the PMIC are enabled in the device-tree.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20230123222329.13994-3-markuss.broks@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Bindings expect UART/serial node names to be "serial".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Bindings expect UART/serial node names to be "serial".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230123151616.369963-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The driver adding support for Exynos5422/Exynos5800 DSI controller was
merged in 2016, yet it wasn't actually used. Add a proper compatible
for it.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20230121201844.46872-3-markuss.broks@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
For some reason, the driver adding support for Exynos5420 MIPI phy
back in 2016 wasn't used on Exynos5420, which caused a kernel panic.
Add the proper compatible for it.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20230121201844.46872-2-markuss.broks@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The HSI2C controller uses clock-frequency and does not have
i2c-sda-delay. The properties were copy-pasted from the slower
S3C-family I2C controller:
exynos5410-odroidxu.dtb: i2c@12ca0000: Unevaluated properties are not allowed ('samsung,i2c-max-bus-freq', 'samsung,i2c-sda-delay' were unexpected)
Link: https://lore.kernel.org/r/20230120155404.323386-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
There is no supports-hs200-mode property for MMC nodes, so assume
intention was mmc-hs200-1_8v:
exynos5260-xyref5260.dtb: mmc@12140000: Unevaluated properties are not allowed ('supports-hs200-mode' was unexpected)
Link: https://lore.kernel.org/r/20230120155404.323386-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The DT schema expects clock name matching certain patterns:
exynos5250-smdk5250.dtb: sata@122f0000: clock-names:1: 'oneOf' conditional failed, one must be fixed:
'sclk_sata' is not one of ['pclk', 'aclk', 'hclk', 'sata']
'pmalive' was expected
'rxoob' was expected
'ref' was expected
Link: https://lore.kernel.org/r/20230120155404.323386-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The DT schema expect HSOTG node names to be named "usb":
exynos4210-smdkv310.dtb: hsotg@12480000: $nodename:0: 'hsotg@12480000' does not match '^usb(@.*)?'
Link: https://lore.kernel.org/r/20230120155404.323386-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The LCD backlight should have a supply. Use same regulator as LCD, to
silence warning:
exynos4412-p4note-n8010.dtb: backlight: 'power-supply' is a required property
Link: https://lore.kernel.org/r/20230120155404.323386-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The simple panel should have a supply. Provide a stub, as the board DTS
does not have a PMIC node, to silence warning:
exynos4412-tiny4412.dtb: panel: 'power-supply' is a required property
Link: https://lore.kernel.org/r/20230120155404.323386-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The SII9234 HDMI bridge expects ports property:
exynos4412-i9305.dtb: hdmi-bridge@39: 'ports' is a required property
exynos4412-i9305.dtb: hdmi-bridge@39: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20230120155404.323386-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Henrik Grimler <henrik@grimler.se>
|
|
We need the USB fixes in here and this resolves merge conflicts as
reported in linux-next in the following files:
drivers/usb/host/xhci.c
drivers/usb/host/xhci.h
drivers/usb/typec/ucsi/ucsi.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler") added
a __thumb2__ define to ASFLAGS to avoid build errors in the crypto code,
which relies on __thumb2__ for preprocessing. Commit 59e2cf8d21e0 ("ARM:
9275/1: Drop '-mthumb' from AFLAGS_ISA") followed up on this by removing
-mthumb from AFLAGS so that __thumb2__ would not be defined when the
default target was ARMv7 or newer.
Unfortunately, the second commit's fix assumes that the toolchain
defaults to -mno-thumb / -marm, which is not the case for Debian's
arm-linux-gnueabihf target, which defaults to -mthumb:
$ echo | arm-linux-gnueabihf-gcc -dM -E - | grep __thumb
#define __thumb2__ 1
#define __thumb__ 1
This target is used by several CI systems, which will still see
redefined macro warnings, despite '-mthumb' not being present in the
flags:
<command-line>: warning: "__thumb2__" redefined
<built-in>: note: this is the location of the previous definition
Remove the global AFLAGS __thumb2__ define and move it to the crypto
folder where it is required by the imported OpenSSL algorithms; the rest
of the kernel should use the internal CONFIG_THUMB2_KERNEL symbol to
know whether or not Thumb2 is being used or not. Be sure that __thumb2__
is undefined first so that there are no macro redefinition warnings.
Link: https://github.com/ClangBuiltLinux/linux/issues/1772
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Fixes: 59e2cf8d21e0 ("ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA")
Fixes: 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Nodes in device tree should be sorted by unit-address, followed by nodes
without a unit-address, sorted alphabetically. Some exceptions are the
top-level aliases, chosen, firmware, memory and reserved-memory nodes,
which are expected to come first.
These rules apply recursively with some exceptions, such as pinmux nodes
or regulator nodes, which often follow more complicated ordering (often
by "importance").
While at it, change the name of some of the nodes to follow standard
naming conventions, which helps with the sorting order and reduces the
amount of warnings from the DT validation tools.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The DT schema expect pin configuration nodes to have pin prefix or
suffix:
exynos4412-trats2.dtb: pinctrl@3860000: sleep-state: 'gpz-0', 'gpz-1', 'gpz-2', 'gpz-3', 'gpz-4', 'gpz-5', 'gpz-6'
do not match any of the regexes: '^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20230120155404.323386-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The property is cd-gpios:
exynos4412-itop-elite.dtb: mmc@12530000: Unevaluated properties are not allowed ('cd-gpio' was unexpected)
Link: https://lore.kernel.org/r/20230120155404.323386-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
There is no desc-num property for MMC nodes:
exynos3250-monk.dtb: mmc@12510000: Unevaluated properties are not allowed ('desc-num' was unexpected)
Link: https://lore.kernel.org/r/20230120155404.323386-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The property is wr-active:
exynos3250-rinato.dtb: fimd@11c00000: i80-if-timings: 'wr-act' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: b59b3afb94d4 ("ARM: dts: add fimd device support for exynos3250-rinato")
Link: https://lore.kernel.org/r/20230120155404.323386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
simple-battery does not have supplies, but it is referenced by charger
instead:
exynos4412-p4note-n8010.dtb: battery-cell: 'power-supplies' does not match any of the regexes: '^ocv-capacity-table-[0-9]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20230120071151.116272-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
DT schema expects names of operating points tables to match certain
pattern:
exynos5422-odroidxu3-lite.dtb: opp-table0: $nodename:0: 'opp-table0' does not match '^opp-table(-[a-z0-9]+)?$'
Link: https://lore.kernel.org/r/20230120064724.40621-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220615221410.27459-6-laurent.pinchart@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable WDTRST1 external signal to send a reset pulse to peripherals while
BMC reset.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20221226054535.2836110-3-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
In OpenBMC phosphor-software-manager uses "alt-bmc" for the secondary flash
label.
Rename flash1 label to "alt-bmc" to support the dual image feature in OpenBMC.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20221226054535.2836110-2-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add a BIOS flash chip to the DTS to open a possibility to reflash the
main CPU BIOS from the BMC.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20230111113934.1176-1-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
BMC UART1 is connected to the P0 CPU UART1. As the connection has
CTS and RTS signals, enable these functions on the BMC side.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20230111115227.1357-1-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add label "bmc" for the flash master partition. The master partition
is required for the firmware update in the OpenBMC ecosystem.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20230111100105.707-1-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
BMC on the EthanolX board uses 24LC128 EEPROM chip for the
configuration settings. The correct compatible string for this
chip is "atmel,24c128".
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20230111113208.964-1-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable Virtual UART (VUART) module. This module provides virtual serial
communication capabilities between host CPU and BMC and can be used for
the Serial-Over-LAN (SoL) feature implementation.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20230111121917.1636-1-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add linux device tree entry related to
greatlakes specific devices connected to BMC SoC.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Link: https://lore.kernel.org/r/20221111034828.2377-3-Delphine_CC_Chiu@Wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
We need the serial/tty changes into this branch as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT and driver fixes from Arnd Bergmann:
"Lots of dts fixes for Qualcomm Snapdragon and NXP i.MX platforms,
including:
- A regression fix for SDHCI controllers on Inforce 6540, and another
SDHCI fix on SM8350
- Reenable cluster idle on sm8250 after the the code fix is upstream
- multiple fixes for the QMP PHY binding, needing an incompatible dt
change
- The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus
6P, to avoid instabilities caused by use of protected memory
regions
- Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
clock error
- A couple of verdin-imx8mm DT fixes for audio playback support
- Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees
- Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
eMMC CMD8 CRC error in HS400ES/HS400 mode
The remaining ARM and RISC-V platforms only have very few smaller dts
bugfixes this time:
- A fix for the SiFive unmatched board's PCI memory space
- A revert to fix a regression with GPIO on Marvell Armada
- A fix for the UART address on Marvell AC5
- Missing chip-select phandles for stm32 boards
- Selecting the correct clock for the sam9x60 memory controller
- Amlogic based Odroid-HC4 needs a revert to restore USB
functionality.
And finally, there are some minor code fixes:
- Build fixes for OMAP1, pxa, riscpc, raspberry pi firmware, and zynq
firmware
- memory controller driver fixes for an OMAP regression and older
bugs on tegra, atmel and mvebu
- reset controller fixes for ti-sci and uniphier platforms
- ARM SCMI firmware fixes for a couple of rare corner cases
- Qualcomm platform driver fixes for incorrect error handling and a
backwards compatibility fix for the apr driver using older dtb
- NXP i.MX SoC driver fixes for HDMI output, error handling in the
imx8 soc-id and missing reference counting on older cpuid code"
* tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (60 commits)
firmware: zynqmp: fix declarations for gcc-13
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60
ARM: omap1: fix building gpio15xx
ARM: omap1: fix !ARCH_OMAP1_ANY link failures
firmware: raspberrypi: Fix type assignment
arm64: dts: qcom: msm8992-libra: Fix the memory map
arm64: dts: qcom: msm8992: Don't use sfpb mutex
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
arm64: dts: msm8994-angler: fix the memory map
arm64: dts: marvell: AC5/AC5X: Fix address for UART1
ARM: footbridge: drop unnecessary inclusion
Revert "ARM: dts: armada-39x: Fix compatible string for gpios"
Revert "ARM: dts: armada-38x: Fix compatible string for gpios"
ARM: pxa: enable PXA310/PXA320 for DT-only build
riscv: dts: sifive: fu740: fix size of pcie 32bit memory
soc: qcom: apr: Make qcom,protection-domain optional again
...
|
|
DT schema expects names of operating points tables to match certain
pattern:
meson8-minix-neo-x8.dtb: gpu-opp-table: $nodename:0: 'gpu-opp-table' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230120072108.138598-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
pxa3xx is now DT-only, and the remaining pxa2xx board files
only use a subset of the possible devices, so remove all
definitions that are not referenced any more.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This was only used by the cm-x300 board, which is now gone.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
irda support was removed a long time ago, so stop
registering the devices from the pxa machine.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is currently no devicetree support for pxa930 or pxa935
SoCs, and no board files remain. As it seems unlikely that anyone
is going to add DT support soon, let's drop the SoC specific code
now.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The majority of all pxa board files has not been touched in a long time,
and no users have spoken up in favor of keeping them around. This leaves
only support for the platforms that were already converted to DT, as
well as the gumstix and spitz/akita/borzoi machines that work in qemu
and can still be converted to DT later.
Cc: Ales Bardorfer <ales@i-tech.si>
Cc: Ales Snuparek <snuparek@atlas.cz>
Cc: Alex Osborne <ato@meshy.org>
Cc: Alex Osborne <bobofdoom@gmail.com>
Cc: Dirk Opfer <dirk@opfer-online.de>
Cc: Ian Molton <spyro@f2s.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Michael Petchkovsky <mkpetch@internode.on.net>
Cc: Nick Bane <nick@cecomputing.co.uk>
Cc: Paul Parsons <lost.distance@yahoo.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Tomas Cech <sleep_walker@suse.cz>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
