summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2023-01-09ARM: omap2: remove unused USB codeArnd Bergmann
Some musb related code is no longer in use after commit 4d62dbda8561 ("ARM: OMAP3: Remove legacy support for am3517-evm") and can be removed. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-09ARM: remove CONFIG_UNUSED_BOARD_FILESArnd Bergmann
All unused board files are removed, so the Kconfig symbol is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-09ARM: pxa: enable PXA310/PXA320 for DT-only buildArnd Bergmann
After commit b5aaaa666a85 ("ARM: pxa: add Kconfig dependencies for ATAGS based boards"), the default PXA build no longer includes support for the board files that are considered unused. As a side-effect of this, the PXA310 and PXA320 support is not built into the kernel any more, even though it should work in principle as long as the symbols are enabled. As Robert points out, there are dts files for zylonite and cm-x300, though those have not made it into the mainline kernel. Link: https://lore.kernel.org/linux-arm-kernel/m2sfglh02h.fsf@free.fr/ Reported-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-09ARM: dts: at91: sama7g5: add nodes for video captureEugen Hristev
Add node for the XISC (eXtended Image Sensor Controller) and CSI2DC (csi2 demux controller). These nodes represent the top level of the video capture hardware pipeline and are directly connected in hardware. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220503095127.48710-4-eugen.hristev@microchip.com
2023-01-09ARM: dts: tqma6ul + mba6ulx: Fix temperature sensor compatibleAlexander Stein
Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip. While at it, fix the node name according to device tree spec recommendations. The EEPROM is a separate node anyway. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-09ARM: dts: imx: Add support for SK-iMX53 boardDmitry Baryshkov
Add support for the StartKit sk-imx53 board, a simple development board with the iMX536A SoC. Tested and works: - UARTs - SPI - I2C - GPU - USB - uSD - NAND - Ethernet Not tested: - Display - VPU - capture Not yet working: - Sound Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-05ARM: zynq: Fix refcount leak in zynq_early_slcr_initQiheng Lin
of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on error path. Add missing of_node_put() to avoid refcount leak. Fixes: 3329659df030 ("ARM: zynq: Simplify SLCR initialization") Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Link: https://lore.kernel.org/r/20221129140544.41293-1-linqiheng@huawei.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-05ARM: dts: zynq: add QSPI controller nodeSteffen Trumtrar
The driver and binding for the Zynq QSPI is already present in the kernel. The node is not added to the zynq-7000.dtsi, however. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Link: https://lore.kernel.org/r/20220811092036.3689983-1-s.trumtrar@pengutronix.de Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-04ARM: renumber bits related to _TIF_WORK_MASKJens Axboe
We want to ensure that the mask related to calling do_work_pending() is within the first 16 bits. Move bits unrelated to that outside of that range, to avoid spuriously calling do_work_pending() when we don't need to. Cc: stable@vger.kernel.org Fixes: 32d59773da38 ("arm: add support for TIF_NOTIFY_SIGNAL") Reported-and-tested-by: Hui Tang <tanghui20@huawei.com> Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Link: https://lore.kernel.org/lkml/7ecb8f3c-2aeb-a905-0d4a-aa768b9649b5@huawei.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-02ARM: dts: meson: align LED node names with dtschemaKrzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern: meson8-minix-neo-x8.dtb: gpio-leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20221125144120.476933-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-01ARM: dts: imx7s: Drop dma-apb interrupt-namesMarek Vasut
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c in Linux kernel does not use it, the property contains duplicate array entries in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get rid of that optional property altogether. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-01ARM: dts: imx6ul: Drop dma-apb interrupt-namesMarek Vasut
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c in Linux kernel does not use it, the property contains duplicate array entries in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get rid of that optional property altogether. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-01ARM: dts: imx6sx: Drop dma-apb interrupt-namesMarek Vasut
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c in Linux kernel does not use it, the property contains duplicate array entries in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get rid of that optional property altogether. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-01ARM: dts: imx6qdl: Drop dma-apb interrupt-namesMarek Vasut
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c in Linux kernel does not use it, the property contains duplicate array entries in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get rid of that optional property altogether. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-01ARM: dts: mxs: Drop dma-apb interrupt-namesMarek Vasut
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c in Linux kernel does not use it, the property contains duplicate array entries in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get rid of that optional property altogether. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-01ARM: dts: imx6qdl: use MAC-address from nvmemNikolaus Voss
IMX6QDL has fuse locations specified for storing the MAC for the built-in ethernet (Table 5-8 in Reference Manual). Define the fuse location in ocotp and refer to them in fec-ethernet. If the cells are not flashed, the driver behavior is unchanged, i.e. other MAC sources will be probed and a random MAC will be used as a last resort. Signed-off-by: Nikolaus Voss <nikolaus.voss@haag-streit.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: imxrt1050: increase mmc max-frequency propertyGiulio Benetti
According to i.MXRT1050 Datasheet usdhc supports up to 200Mhz clock so let's increase max-frequency property to 200Mhz. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Acked-by: Jesse Taube <mr.bossman075@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: imx: add missing of_node_put()Dario Binacchi
Calling of_find_compatible_node() returns a node pointer with refcount incremented. Use of_node_put() on it when done. The patch fixes the same problem on different i.MX platforms. Fixes: 8b88f7ef31dde ("ARM: mx25: Retrieve IIM base from dt") Fixes: 94b2bec1b0e05 ("ARM: imx27: Retrieve the SYSCTRL base address from devicetree") Fixes: 3172225d45bd9 ("ARM: imx31: Retrieve the IIM base address from devicetree") Fixes: f68ea682d1da7 ("ARM: imx35: Retrieve the IIM base address from devicetree") Fixes: ee18a7154ee08 ("ARM: imx5: retrieve iim base from device tree") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: vf610: Fix pca9548 i2c-mux node namesGeert Uytterhoeven
"make dtbs_check": arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: $nodename:0: 'tca9548@70' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4' were unexpected) From schema: /scratch/geert/linux/linux-renesas/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming PCA9548 nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: imx: Fix pca9547 i2c-mux node nameGeert Uytterhoeven
"make dtbs_check": arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected) From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml Fix this by renaming the PCA9547 node to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: vf610: align LED node names with dtschemaKrzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: imx: align LED node names with dtschemaKrzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern: imx50-kobo-aura.dtb: gpio-leds: 'on' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' imx6dl-yapp4-draco.dtb: led-controller@30: 'chan@0', 'chan@1', 'chan@2' do not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: colibri-imx7: Disable usb over-currentPhilippe Schenker
Disable usb over-current of the chipidea driver on all Carrier-Boards used by Toradex. Do this as we don't want to use this functionality on our Carrier Boards and to leave it open to someone who includes our module-level device-trees. This will prevent the warning "No over current polarity defined" from being printed on boot. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: colibri-imx6ull: Disable usb over-currentPhilippe Schenker
Disable usb over-current of the chipidea driver on all Carrier-Boards used by Toradex. Do this as we don't want to use this functionality on our Carrier Boards and to leave it open to someone who includes our module-level device-trees. This will prevent the warning "No over current polarity defined" from being printed on boot. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: colibri-imx6: Disable usb over-currentPhilippe Schenker
Disable usb over-current of the chipidea driver on all Carrier-Boards used by Toradex. Do this as we don't want to use this functionality on our Carrier Boards and to leave it open to someone who includes our module-level device-trees. Remove the now obsolete disable-over-current flag from module-level device-tree imx6qdl-colibri.dtsi and leave it as already mentioned to the people actually implementing the carrier-board to implement this. This will prevent the warning "No over current polarity defined" from being printed on boot. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: apalis-imx6: Disable usb over-currentPhilippe Schenker
Disable usb over-current of the chipidea driver on all Carrier-Boards used by Toradex. Do this as we don't want to use this functionality on our Carrier Boards and to leave it open to someone who includes our module-level device-trees. Remove the now obsolete disable-over-current flag from module-level device-tree imx6qdl-apalis.dtsi and leave it as already mentioned to the people actually implementing the carrier-board to implement this. This will prevent the warning "No over current polarity defined" from being printed on boot. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: imx6qdl-gw560x: Remove incorrect 'uart-has-rtscts'Fabio Estevam
The following build warning is seen when running: make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml arch/arm/boot/dts/imx6dl-gw560x.dtb: serial@2020000: rts-gpios: False schema does not allow [[20, 1, 0]] From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml The imx6qdl-gw560x board does not expose the UART RTS and CTS as native UART pins, so 'uart-has-rtscts' should not be used. Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination detected by serial.yaml. Fix the problem by removing the incorrect 'uart-has-rtscts' property. Fixes: b8a559feffb2 ("ARM: dts: imx: add Gateworks Ventana GW5600 support") Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: imx7d-pico: Use 'clock-frequency'Fabio Estevam
'clock_frequency' is not a valid property. Use the correct 'clock-frequency' instead. Fixes: 8b646cfb84c3 ("ARM: dts: imx7d-pico: Add support for the dwarf baseboard") Fixes: 6418fd92417f ("ARM: dts: imx7d-pico: Add support for the nymph baseboard") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: imx6ul-pico-dwarf: Use 'clock-frequency'Fabio Estevam
'clock_frequency' is not a valid property. Use the correct 'clock-frequency' instead. Fixes: 47246fafef84 ("ARM: dts: imx6ul-pico: Add support for the dwarf baseboard") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: imx51: Fix sram.yaml warningsFabio Estevam
Add ranges, #address-cells and #size-cells properties to the sram node to fix the following warnings when checking sram.yaml: make dtbs_check DT_SCHEMA_FILES=sram.yaml ... arch/arm/boot/dts/imx51-apf51.dtb: sram@1ffe0000: '#address-cells' is a required property From schema: Documentation/devicetree/bindings/sram/sram.yaml arch/arm/boot/dts/imx51-apf51.dtb: sram@1ffe0000: '#size-cells' is a required property From schema: Documentation/devicetree/bindings/sram/sram.yaml arch/arm/boot/dts/imx51-apf51.dtb: sram@1ffe0000: 'ranges' is a required property From schema: Documentation/devicetree/bindings/sram/sram.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-31ARM: dts: imx53: Fix sram.yaml warningsFabio Estevam
Add ranges, #address-cells and #size-cells properties to the sram node to fix the following warnings when checking sram.yaml: make dtbs_check DT_SCHEMA_FILES=sram.yaml ... DTC_CHK arch/arm/boot/dts/imx53-qsb.dtb arch/arm/boot/dts/imx53-qsb.dtb: sram@f8000000: '#address-cells' is a required property From schema: Documentation/devicetree/bindings/sram/sram.yaml /home/fabio/linux-next/arch/arm/boot/dts/imx53-qsb.dtb: sram@f8000000: '#size-cells' is a required property From schema: Documentation/devicetree/bindings/sram/sram.yaml /home/fabio/linux-next/arch/arm/boot/dts/imx53-qsb.dtb: sram@f8000000: 'ranges' is a required property From schema: Documentation/devicetree/bindings/sram/sram.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-30crypto: arm/sha1 - Fix clang function cast warningsHerbert Xu
Instead of casting the function which upsets clang for some reason, change the assembly function siganture instead. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-29ARM: dts: qcom: msm8974: Add compat qcom,msm8974-dsi-ctrlBryan O'Donoghue
Add silicon specific compatible qcom,msm8974-dsi-ctrl to the mdss-dsi-ctrl block. This allows us to differentiate the specific bindings for msm8974 against the yaml documentation. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221223021025.1646636-10-bryan.odonoghue@linaro.org
2022-12-29ARM: dts: qcom: apq8064: add compat qcom,apq8064-dsi-ctrlBryan O'Donoghue
Append silicon specific compatible qcom,apq8064-dsi-ctrl to the mdss-dsi-ctrl block. This allows us to differentiate the specific bindings for apq8064 against the yaml documentation. Reviewed-by: David Heidelberg <david@ixit.cz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221223021025.1646636-9-bryan.odonoghue@linaro.org
2022-12-29ARM: dts: qcom: sdx65: add specific compatible for USB HS PHYKrzysztof Kozlowski
Add SoC-specific compatible to the USB HS PHY to match other devices and bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221223161835.112079-3-krzysztof.kozlowski@linaro.org
2022-12-29ARM: dts: qcom: sdx55: add specific compatible for USB HS PHYKrzysztof Kozlowski
Add SoC-specific compatible to the USB HS PHY to match other devices and bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221223161835.112079-2-krzysztof.kozlowski@linaro.org
2022-12-29ARM: dts: qcom: apq8026-samsung-matisse-wifi: Enable ADSPMatti Lehtimäki
Configure the reserved memory for ADSP and enable it. Delete nodes with reference to label. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221218211957.118473-1-matti.lehtimaki@gmail.com
2022-12-28ARM: dts: qcom: pm8226: add IADC nodeRayyan Ansari
Add a node for the current ADC (IADC) found in PM8226. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> [bjorn: Updated node name and added specific compatible, per request from Luca Weiss] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221223193403.781355-4-rayyan@ansari.sh
2022-12-28ARM: dts: qcom: pm8226: add PON device node along with resin sub-nodeRayyan Ansari
The PON (Power On) device in PM8226 supports both the power key and resin (reset input). The reset input is usually connected to a physical volume up/down button. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221223193403.781355-3-rayyan@ansari.sh
2022-12-28ARM: dts: qcom: pm8226: sort includes alphabetically and nodes by addressRayyan Ansari
Sort the includes and nodes for consistency. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221223193403.781355-2-rayyan@ansari.sh
2022-12-28ARM: dts: qcom: msm8974: add clocks and clock-names to mmcc deviceDmitry Baryshkov
Add clocks and clock-names nodes to the mmcc device to bind clocks using the DT links. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221204124508.1415713-12-dmitry.baryshkov@linaro.org
2022-12-28ARM: dts: qcom: msm8974: add clocks and clock-names to gcc deviceDmitry Baryshkov
Add clocks and clock-names nodes to the gcc device to bind clocks using the DT links. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221204124508.1415713-11-dmitry.baryshkov@linaro.org
2022-12-28ARM: dts: qcom: msm8974: add second DSI host and PHYDmitry Baryshkov
Add second DSI host and PHY available on the msm8974 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221204124508.1415713-10-dmitry.baryshkov@linaro.org
2022-12-28ARM: dts: qcom: apq8084-ifc6540: fix overriding SDHCIKrzysztof Kozlowski
While changing node names of APQ8084 SDHCI, the ones in IFC6540 board were not updated leading to disabled and misconfigured SDHCI. Cc: <stable@vger.kernel.org> Fixes: 2477d81901a2 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221204084614.12193-1-krzysztof.kozlowski@linaro.org
2022-12-27ARM: dts: qcom: msm8974-castor: Enable charging over USBJulian Weigt
Set usb-charge-current-limit to higher value so that the device can be charged over USB. Signed-off-by: Julian Weigt <juw@posteo.de> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221121213019.324558-2-luca@z3ntu.xyz
2022-12-27ARM: dts: qcom: msm8974-castor: Fix touchscreen initLuca Weiss
On some devices a higher delay is needed, otherwise touchscreen probe fails. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221121213019.324558-1-luca@z3ntu.xyz
2022-12-27ARM: dts: qcom: msm8974-*: re-add remoteproc suppliesLuca Weiss
As part of a recent cleanup commit, the remoteproc supplies for adsp and modem were removed from msm8974.dtsi and now need to be set in the device dts. Do so. Fixes: f300826d27be ("ARM: dts: qcom-msm8974: Sort and clean up nodes") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221121212226.321514-2-luca@z3ntu.xyz
2022-12-27ARM: dts: msm8974: castor: Define pm8841 regulatorsBjorn Andersson
Define the pm8841 regulators under SMD/RPM, to allow the modem remoteproc to set the voltage during boot of the remote processor. Entries are just copied from the Honami dts. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221121212226.321514-1-luca@z3ntu.xyz
2022-12-27ARM: dts: qcom: sdx55-mtp: add MPSS remoteproc memory-regionKrzysztof Kozlowski
The MPSS PAS remoteproc bindings require memory-region. The MPSS PAS device node is disabled, but schema still asks for it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118113747.56700-1-krzysztof.kozlowski@linaro.org
2022-12-27ARM: OMAP2+: Fix memory leak in realtime_counter_init()Chen Hui
The "sys_clk" resource is malloced by clk_get(), it is not released when the function return. Fixes: fa6d79d27614 ("ARM: OMAP: Add initialisation for the real-time counter.") Signed-off-by: Chen Hui <judy.chenhui@huawei.com> Message-Id: <20221108141917.46796-1-judy.chenhui@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-20 23:39:28 +0000