Age | Commit message (Collapse) | Author |
|
The ATMEL_ISC and ATMEL_XISC have been deprecated and moved to staging.
Use the new MICROCHIP_ISC/MICROCHIP_XISC symbols which are the
replacement drivers.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221125130646.454084-2-eugen.hristev@microchip.com
|
|
The ATMEL_ISC and ATMEL_XISC have been deprecated and moved to staging.
Use the new MICROCHIP_ISC/MICROCHIP_XISC symbols which are the
replacement drivers.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221125130646.454084-1-eugen.hristev@microchip.com
|
|
The arm architecture doesn't support CFI yet, and even if it did, the
new CFI implementation supports indirect calls to assembly functions.
Therefore, there's no need to use a wrapper function for nh_neon().
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add OTP (one time programmable) support.
The both lan966x SocS (lan9662 and lan9668) have the same OTP IP.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220916194946.2869510-1-horatiu.vultur@microchip.com
|
|
On this board SDMMC0 has a 1.8 signaled eMMC device powered at
3.3V. Hence, correctly describe the connected rails from the PMIC.
SDMMC1 is connected to a voltage switch that can change from
3.3V to 1.8V by a hardware controlled pin.
However SDMMC1 at the moment works only in 3.3V mode (default speed,
no UHS-I modes), thus connect the signaling to the 3.3V rail.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[claudiu.beznea: reshaped a bit the commit message]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221124154610.246790-1-eugen.hristev@microchip.com
|
|
Now that the driver has been updated to drop fetching the clk reference by
name we no longer need the clock-names property in the ov5645 sensor node.
This is in preparation for removal for clock-names property from the DT
binding.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that the driver has been updated to drop fetching the clk reference by
name we no longer need the clock-names property in the ov5645 sensor node.
This is in preparation for removal for clock-names property from the
DT binding.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a bunch of late fixes that just came in, in particular a
longer series for Rockchips devicetree files, but most of those just
address cosmetic errors that were found during the binding validation.
There are a couple of code changes:
- A regression fix to the IXP42x PCI bus
- A fix for a memory leak on optee, and another one for mach-mxs
- Two fixes for the sunxi rsb bus driver, to address problems with
the shutdown logic
The rest are small but important devicetree fixes for a number of
individual boards, addressing issues across all platforms:
- arm global timer on older rockchip SoCs is unstable and needs to be
disabled in favor of a more reliable clocksource
- Corrections to fix bluetooth, mmc, and networking on a few Rockchip
boards
- at91/sam9g20ek UDC needs a pin controller config change
- an omap board runs into mmc probe errors because of regulator nodes
in the wrong place
- imx8mp-evk has a minor inaccuracy with its pin config, but without
user visible impact
- The Allwinner H6 Hantro G2 video decoder needs an IOMMU reference
to prevent the driver from crashing"
* tag 'soc-fixes-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
bus: ixp4xx: Don't touch bit 7 on IXP42x
ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties
arm64: dts: imx8mp-evk: correct pcie pad settings
ARM: mxs: fix memory leak in mxs_machine_init()
ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl
tee: optee: fix possible memory leak in optee_register_device()
arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
bus: sunxi-rsb: Support atomic transfers
bus: sunxi-rsb: Remove the shutdown callback
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt
ARM: dts: am335x-pcm-953: Define fixed regulators in root node
ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name
arm64: dts: rockchip: fix ir-receiver node names
ARM: dts: rockchip: fix ir-receiver node names
arm64: dts: rockchip: fix adc-keys sub node names
ARM: dts: rockchip: fix adc-keys sub node names
arm: dts: rockchip: remove clock-frequency from rtc
arm: dts: rockchip: fix node name for hym8563 rtc
...
|
|
Pull ARM fixes from Russell King:
"Two fixes for 6.1:
- fix stacktraces for tracepoint events in Thumb2 mode
- fix for noMMU ZERO_PAGE() implementation"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation
ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Disabling of the unreliable arm-global-timer on earliest
Rockchip SoCs, due to its frequency being bound to the
changing cpu clock.
* tag 'v6.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
|
|
A new "shutdown" timer state is being added to the generic timer code. One
of the functions to change the timer into the state is called
"timer_shutdown()". This means that there can not be other functions called
"timer_shutdown()" as the timer code owns the "timer_*" name space.
Rename timer_shutdown() to spear_timer_shutdown() to avoid this conflict.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20221106212701.822440504@goodmis.org
Link: https://lore.kernel.org/all/20221105060155.228348078@goodmis.org/
Link: https://lore.kernel.org/r/20221110064146.810953418@goodmis.org
Link: https://lore.kernel.org/r/20221123201624.513863211@linutronix.de
|
|
The L2 cache is present on the newer SAMA5D2 and SAMA5D4 families, but
apparently not for the older SAMA5D3.
Solves a build-time regression with the following symptom:
sama5.c:(.init.text+0x48): undefined reference to `outer_cache'
Fixes: 3b5a7ca7d252 ("ARM: at91: setup outer cache .write_sec() callback if needed")
Signed-off-by: Peter Rosin <peda@axentia.se>
[claudiu.beznea: delete "At least not always." from commit description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/b7f8dacc-5e1f-0eb2-188e-3ad9a9f7613d@axentia.se
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/soc
ARM: keystone: TI Updates for v6.2
Updates:
* Switch over to standard PSCI for keystone2 platforms.
* tag 'ti-keystone-soc-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
ARM: keystone: Replace platform SMP with PSCI
Link: https://lore.kernel.org/r/20221122185650.nrh7s2g5obndj5vj@dental
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixes to make the automated binding tools happier (node-names,
undocumented + unneeded properties) and fixes for non-working
devices on some boards.
* tag 'v6.1-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt
ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name
arm64: dts: rockchip: fix ir-receiver node names
ARM: dts: rockchip: fix ir-receiver node names
arm64: dts: rockchip: fix adc-keys sub node names
ARM: dts: rockchip: fix adc-keys sub node names
arm: dts: rockchip: remove clock-frequency from rtc
arm: dts: rockchip: fix node name for hym8563 rtc
arm64: dts: rockchip: remove clock-frequency from rtc
arm64: dts: rockchip: fix node name for hym8563 rtc
arm64: dts: rockchip: lower rk3399-puma-haikou SD controller clock frequency
arm64: dts: rockchip: keep I2S1 disabled for GPIO function on ROCK Pi 4 series
arm64: dts: rockchip: fix quartz64-a bluetooth configuration
arm64: dts: rockchip: add enable-strobe-pulldown to emmc phy on nanopi4
arm64: dts: rockchip: remove i2c5 from rk3566-roc-pc
arm64: dts: rockchip: Fix i2c3 pinctrl on rk3566-roc-pc
arm64: dts: rockchip: Fix gmac failure of rgmii-id from rk3566-roc-pc
arm64: dts: rockchip: Drop RK3399-Scarlet's repeated ec_ap_int_l definition
Link: https://lore.kernel.org/r/6274427.GXAFRqVoOG@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
Nuvoton device tree updates for 6.2
- Update fix-partition syntax
- WPCM450 updates for SPI controller, clock, watchdog, serial
- GPIO line names for Supermicro X9SCI-LN4F BMC
* tag 'nuvoton-6.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: nuvoton: wpcm450: Add missing aliases for serial0/serial1
ARM: dts: wpcm450: Enable watchdog by default
ARM: dts: wpcm450: Add clock controller node
ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add SPI flash
ARM: dts: wpcm450: Add FIU SPI controller node
ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
ARM: dts: nuvoton,wpcm450-supermicro-x9sci-ln4f: Add GPIO line names
Link: https://lore.kernel.org/r/CACPK8XffL5_L5D_ZGQid0r4h0wfTc+XBGUO1-0QW7ErPPrrvEQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.2
- New machines
* IBM Bonnell AST2600 BMC, for a Power10 server
* Delta AHE-50DC AST1250 BMC, for a 1U Open19 power shelf
- Removed machines
* IBM Mihawk AST2500 BMC, a Power9 server similar to Witherspoon
- Fixes and updates for bletchley, mtjade/mtmitchell, rainier/everest
* tag 'aspeed-6.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: mtjade: Add SMPro nodes
ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
ARM: dts: aspeed: Add Delta AHE-50DC BMC
dt-bindings: arm: aspeed: document Delta AHE-50DC BMC
ARM: dts: aspeed: rainier: Fix pca9551 nodes
ARM: dts: aspeed: p10bmc: Add occ-hwmon nodes
ARM: dts: aspeed-g6: Add aliases for mdio nodes
ARM: dts: aspeed: Remove Mihawk
ARM: dts: aspeed: rainier,everest: Move reserved memory regions
ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree
ARM: dts: aspeed: bletchley: Enable emmc and ehci1
ARM: dts: aspeed: bletchley: Update and fix gpio-line-names
ARM: dts: aspeed: bletchley: Update fusb302 nodes
ARM: dts: aspeed: bletchley: Bind presence-sledX pins via gpio-keys
ARM: dts: aspeed: bletchley: Disable GPIOV2 pull-down
ARM: dts: aspeed: bletchley: Change LED sys_log_id to active low
Link: https://lore.kernel.org/r/CACPK8Xfsc8BaL_qAgV+3Rk-AFcQoDVfTpMzHvq_rR-UYqwpNNQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.2-rc1
This fixes various minor issues in device trees that are flagged by the
DT validation tools.
* tag 'tegra-for-6.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Remove duplicate pin entry in pinmux
ARM: tegra: Remove unused interrupt-parent properties
ARM: tegra: Fix nvidia,io-reset properties
ARM: tegra: Add missing power-supply for panels
ARM: tegra: Fixup pinmux node names
ARM: tegra: Use correct compatible string for ASUS TF101 panel
Link: https://lore.kernel.org/r/20221119012025.3968358-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM defconfig updates
This enables remaining Qualcomm TLMM pinctrl drivers in the
qcom_defconfig.
* tag 'qcom-defconfig-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: enable rest of ARMv7 SoCs pinctrl drivers
Link: https://lore.kernel.org/r/20221122203452.1855254-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If we don't provide the .map_io() callback, the LL debug
defines will kick in anyway, so delete the UART debug map
as well.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221121221015.1454948-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA dts updates for v6.2
- Use the "clk-phase-sd-hs" property for SDMMC
- Remove the "clk-phase" fom the sdmmc_clk that is no longer used
- Clean dtschema for mmc node
- Increase NAND partition for Arria10
* tag 'socfpga_dts_updates_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
arm: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
arm: dts: socfpga: remove "clk-phase" in sdmmc_clk
arm: dts: socfpga: align mmc node names with dtschema
ARM: dts: socfpga: arria10: Increase NAND boot partition size
Link: https://lore.kernel.org/r/20221121163259.341974-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is no reg property for pwm-omap-dmtimer.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
With complete devicetree data available to probe with ti-sysc interconnect
target module driver, we can now drop the related SoC data.
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can drop the legacy booting for the related musb driver if we update
the omap3 SoCs variants to boot using ti-sysc interconnect target module.
devicetree@vger.kernel.org
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Fix addressing in the NXP TDA998x HDMI transmitters' subnodes:
- Add missing #{address,size}-cells properties to ports capsule,
- Add missing reg properties to port child nodes,
- Drop bogus unit addresses from endpoint grandchildren nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-Id: <e9ac64d29bc18b3b394fd9a2abbfeafacc624f98.1669047037.git.geert+renesas@glider.be>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Without these, /chosen/stdout-path = "serial0:115200n8" does not work.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221008130822.1227104-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The watchdog timer is always usable, regardless of board design, so
there is no point in marking the watchdog device as disabled-by-default
in nuvoton-wpcm450.dtsi.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220609214830.127003-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This declares the clock controller and the necessary 48 Mhz reference
clock in the WPCM450 device. Switching devices over to the clock
controller is intentionally done in a separate patch to give time for
the clock controller driver to land.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221104161850.2889894-5-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add the BMC firmware flash to the devicetree, so that it can be accessed
from Linux.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221105185911.1547847-7-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add the SPI controller (FIU, Flash Interface Unit) to the WPCM450
devicetree, according to the newly defined binding, as well as the SHM
(shared memory interface) syscon.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221105185911.1547847-6-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Regulator changes for am335x-pcm-953
This is for deferred probe issue on am335x-pcm-953 sdhci-omap regulator.
* tag 'am335x-pcm-953-regulators' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-pcm-953: Define fixed regulators in root node
Link: https://lore.kernel.org/r/pull-1669036672-530717@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.2, round 1
Highlights:
----------
- MPU:
- ST boards:
- Add MCP23017 IO expander support on stm32mp135f-dk board.
- Add stm32g0 support for USB typeC on stm32mp135f-dk
- Add USB (EHCI / OTG) on stm32mp135f-dk
- Add ADC support on stm32mp135f-dk
- Add USB2514B onboard hub on stm32mp157c-ev1
- DH:
- Fix severals Yaml DT validation issues
* tag 'stm32-dt-for-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (28 commits)
ARM: dts: stm32: Rename mdio0 to mdio on DHCOR Testbench board
ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk
ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13
ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk
ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk
ARM: dts: stm32: add USB OTG HS support on stm32mp131
ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131
ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131
ARM: dts: stm32: add PWR fixed regulators on stm32mp131
ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
ARM: dts: stm32: add adc support on stm32mp135f-dk
ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk
ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk
ARM: dts: stm32: add adc support to stm32mp13
ARM: dts: stm32: Drop MMCI interrupt-names
ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1
...
Link: https://lore.kernel.org/r/3235e5be-d89f-f76c-5e25-5d1210feb857@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm device tree update for 6.2:
- New device tree for Kobo Aura 2 E-Boot reader which is built on i.MX6SL
SoC.
- Enable backlight and boost support for imx6sl-tolino-shine2hd.
- Enable CYTTSP5 touchscreen support for E60K02.
- Enable Silergy SY7636A EPD PMIC on imx7d-remarkable2 epaper tablet.
- Add watchdog property 'fsl,suspend-in-wait' for i.MX6UL Phytec Phycore
SoM to avoid watchdog triggering in 'freeze' low power mode.
- Correct the polarity of AT86RF233 reset line for vf610-zii-dev-rev-c
board.
- A bunch of Colibri device tree updates from Marcel Ziswiler and Philippe
Schenker, correct USBH_PEN property, remove spurious debounce property,
add USB dual-role switching, and some cosmetic change.
- Other small and random changes.
* tag 'imx-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: colibri-imx6ull: Enable dual-role switching
ARM: dts: imx: e60k02: Add touchscreen
ARM: dts: imx6qdl-sabre: Add mmc aliases
ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait mode
ARM: dts: imx7d-remarkable2: Enable silergy,sy7636a
ARM: dts: imx6sl-tolino-shine2hd: Add backlight boost
ARM: dts: imx6sl-tolino-shine2hd: Add backlight
ARM: dts: colibri-imx7: fix confusing naming
ARM: dts: colibri-imx6ull: add -hog to gpio hogs
ARM: dts: colibri-imx6ull: enable default peripherals
ARM: dts: colibri-imx6ull: keep peripherals disabled
ARM: dts: ls1021: correct indentation
ARM: dts: vf610-zii-dev-rev-c: fix polarity of at86rf233 reset line
ARM: dts: imx7-colibri: remove spurious debounce property
ARM: dts: colibri-imx6: specify usbh_pen gpio being active-low
ARM: dts: colibri-imx6: move vbus-supply to module level device tree
ARM: dts: colibri-imx6: usb dual-role switching
ARM: dts: imx: Add devicetree for Kobo Aura 2
Link: https://lore.kernel.org/r/20221119125733.32719-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc
i.MX SoC change for 6.2:
- A couple of cleanups from Geert Uytterhoeven to drop unneeded include
of pinctrl machine header from i.MX3 and MXS code.
* tag 'imx-soc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx3: Remove unneeded #include <linux/pinctrl/machine.h>
ARM: mxs: Remove unneeded #include <linux/pinctrl/consumer.h>
Link: https://lore.kernel.org/r/20221119125733.32719-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc
IXP4xx patches for v6.2:
- Dropped the final static mappings.
- Fixed some errors in the MAINTAINERS file.
* tag 'ixp4xx-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: ixp4xx: Remove unused static map
MAINTAINERS: adjust ARM/INTEL IXP4XX ARM ARCHITECTURE to ixp4xx clean-up
Link: https://lore.kernel.org/r/CACRpkdYNwyZ1FDM07MkUfYyYGtXFQfy1xP9Utc5+K2+gn_ZW9g@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.1, part 3:
- Fix a small memory leak in mach-mxs code.
- Correct PCIe pad configuration for imx8mp-evk board.
- Fix ref/tcxo clock frequency property for imx6q-prti6q board.
* tag 'imx-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties
arm64: dts: imx8mp-evk: correct pcie pad settings
ARM: mxs: fix memory leak in mxs_machine_init()
Link: https://lore.kernel.org/r/20221119073812.GQ16229@T480
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 6.1 #2
It contains:
- fix UDC on at91sam9g20ek boards by adding vbus pin
* tag 'at91-fixes-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl
Link: https://lore.kernel.org/r/20221118131205.301662-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- Added H616 USB node
- Enabled bluetooth on Pinebook A64
- Added f1c100s PWM, I2C, CIR and LRADC nodes
- Added USB HCI0 PHYs property to H3/H5
* tag 'sunxi-dt-for-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: H3/H5: Add phys property to USB HCI0
ARM: dts: suniv: f1c100s: add LRADC node
ARM: dts: suniv: f1c100s: add CIR DT node
dt-bindings: media: IR: Add F1C100s IR compatible string
ARM: dts: suniv: f1c100s: add I2C DT nodes
ARM: dts: suniv: f1c100s: add PWM node
dt-bindings: pwm: allwinner,sun4i-a10: Add F1C100s compatible
arm64: dts: allwinner: a64: enable Bluetooth on Pinebook
arm64: dts: allwinner: h616: X96 Mate: Add USB nodes
arm64: dts: allwinner: h616: OrangePi Zero 2: Add USB nodes
arm64: dts: allwinner: h616: Add USB nodes
dt-bindings: usb: Add H616 compatible string
ARM: dts: axp22x/axp809: Add GPIO controller nodes
ARM: dts: axp803/axp81x: Drop GPIO LDO pinctrl nodes
Link: https://lore.kernel.org/r/Y3fuAosinWbrj+Dy@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
AT91 DT for 6.2 #2
It contains:
- one typo fix for a SAMA7G5 pin; the pin is not used anywhere in the
device trees.
* tag 'at91-dt-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5: fix signal name of pin PD8
Link: https://lore.kernel.org/r/20221118131214.301678-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Initial version of devicetree sources for Pro5 EPCORE and ProEX boards.
These boards have UART, I2C, USB, eMMC and PCI endpoint in common.
Pro5 EPCORE board is a kind of Pro5 reference board with PCIe endpoint
card edge connector.
ProEX board shares peripherals with Linux and other systems, and some
of these ports are available in Linux.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221117163219.3673-3-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Exynos3250 and Exynos5420 are using same compatible string for MFC codec
device but they have different clock hierarchy and complexity. Add new
compatible string followed by mfc-v7 fallback for Exynos3250 SoC.
Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Link: https://lore.kernel.org/r/20221114115024.69591-4-aakarsh.jain@samsung.com
Link: https://lore.kernel.org/r/20221116093010.18515-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 6.2:
- Enable Renesas 9-series PCIe clock generator, SNVS LPGRP and i.MX8MP
interconnect driver support in arm64 defconfig.
- Enable Silergy SY7636A EPD PMIC, CYTTSP5 touchscreen and USB GPIO
extcon support in imx_v6_v7_defconfig.
* tag 'imx-defconfig-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Add Renesas 9-series PCIe clock generator
ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen
ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a
ARM: imx_v6_v7_defconfig: Enable USB GPIO extcon support
arm64: defconfig: enable i.mx 8m plus specific interconnect support
arm64: defconfig: enable snvs lpgpr support
Link: https://lore.kernel.org/r/20221119125733.32719-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the USB Type-C UCSI, and the STM32G0 UCSI drivers as modules, since
used on STM32MP13 board.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20221117103931.26174-1-alexandre.torgue@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
DMA allocations can never be turned back into a page pointer, so
requesting compound pages doesn't make sense and it can't even be
supported at all by various backends.
Reject __GFP_COMP with a warning in dma_alloc_attrs, and stop clearing
the flag in the arm dma ops and dma-iommu.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
The IXP4xx is just using the device tree now, only keep the
static UART map if and only if we are debugging.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The unit addresses do not correspond to the nodes' reg properties,
because they don't have any.
Fixes: e42b650f828d ("ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB")
Fixes: ee33e2fb3d70 ("ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree")
Fixes: 59f5abe09f0a ("ARM: dts: nuvoton: Add Quanta GSJ BMC")
Fixes: 14579c76f5ca ("ARM: dts: nuvoton: Add Fii Kudo system")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221031221553.163273-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
To make gpioinfo output more useful and enable gpiofind usage, add line
names for GPIOs where the function is known.
This patch follows the naming convention defined for OpenBMC, as much as
possible:
https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221101102916.440526-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add SMPro nodes to Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221118065109.2339066-1-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add BMC SSIF node to support IPMI in-band communication.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221024081115.3320584-1-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is a 1U Open19 power shelf with six PSUs and 50 12VDC outputs via
LM25066 efuses. It's managed by a pair of AST1250 BMCs in a redundant
active/active configuration using a PCA9541 on each I2C bus to
arbitrate access between the two.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20221108001551.18175-3-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The pca9551 compatible LED drivers are under the pca9546 mux
on Rainier pass > 1. On pass 1, they are directly connected to
the aspeed i2c.
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221102223554.1738642-1-joel@jms.id.au
|