| Age | Commit message (Collapse) | Author |
|---|
|
After converting the bcm2836-l1-intc DT binding to YAML, the DT schema
checks gave warnings like:
'local_intc@40000000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
So fix them accordingly.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240812200358.4061-4-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Fix a recently introduced build failure.
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240805232026.65087-2-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to fsl,imx-dma.yaml, the node name must be dma-controller.
Change it accordingly to fix the following dt-schema warnings:
'dma@10001000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The davinci_init_ide() has been removed since
commit 2af4fcc0d357 ("ARM: davinci: remove unused board support"),
so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20240813071640.1047137-3-cuigaosheng1@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The davinci_cfg_reg_list() has been removed since
commit dec85a95167a ("ARM: davinci: clean up platform support"),
so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20240813071640.1047137-2-cuigaosheng1@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
On the imx6dl-yapp4 revision based boards, the RGB LED is not driven
directly by the LP5562 driver but through FET transistors. Hence the LED
current is not determined by the driver but by the LED series resistors.
On the imx6dl-yapp43 revision based boards, we removed the FET transistors
to drive the LED directly from the LP5562 but forgot to tune the output
current to match the previous HW design.
Set the LED current on imx6dl-yapp43 based boards to the same values
measured on the imx6dl-yapp4 boards and limit the maximum current to 20mA.
Fixes: 7da4734751e0 ("ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
It's not necessary to split display0 node. Merge it to save two lines.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
SII9022 and TVE are connected with IPU DI0 and IPU DI1 respectively, so
they are in two different display pipelines and may run simultaneously.
Keep TVE being enabled as imx53-qsb-common.dtsi does by not setting it's
status property to "disabled".
Fixes: eeb403df953f ("ARM: dts: imx53-qsb: add support for the HDMI expander")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect the LED and GPIO keys node names to follow certain
pattern, see dtbs_check warnings:
nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb: gpio-keys: 'uid' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)...
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20240701164915.577068-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Various nodes on the Arm Realview boards have missing or spurious
unit-addresses.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240528191510.1444068-1-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are three sets of patches for the soc tree:
- Marek Behún addresses multiple build time regressions caused by
changes to the cznic turris-omnia support
- Dmitry Torokhov fixes a regression in the legacy "gumstix" board
code he cleaned up earlier
- The TI K3 maintainers found multiple bugs in the in gpio, audio and
pcie devicetree nodes"
* tag 'arm-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa/gumstix: fix attaching properties to vbus gpio device
doc: platform: cznic: turris-omnia-mcu: Use double backticks for attribute value
doc: platform: cznic: turris-omnia-mcu: Fix sphinx-build warning
platform: cznic: turris-omnia-mcu: Make GPIO code optional
platform: cznic: turris-omnia-mcu: Make poweroff and wakeup code optional
platform: cznic: turris-omnia-mcu: Make TRNG code optional
platform: cznic: turris-omnia-mcu: Make watchdog code optional
arm64: dts: ti: k3-j784s4-main: Correct McASP DMAs
arm64: dts: ti: k3-j722s: Fix gpio-range for main_pmx0
arm64: dts: ti: k3-am62p: Fix gpio-range for main_pmx0
arm64: dts: ti: k3-am62p: Add gpio-ranges for mcu_gpio0
arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on
arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1
|
|
Bindings expect the LED node names to follow certain pattern, see
dtbs_check warnings:
at91sam9g15ek.dtb: leds: 'pb18', 'pd21' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20240701164952.577277-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
These properties are common for all i2c subnodes. Allows to add i2c device
nodes (like an rtc for example) in other .dts files including
sam9x60.dtsi without requiring to repeat these properties for each i2c
device again and again.
Found on a custom board after adding this in .dts:
&flx5 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
i2c5: i2c@600 {
pinctrl-0 = <&pinctrl_flx5_default>;
status = "okay";
pcf8523: rtc@68 {
compatible = "nxp,pcf8523";
reg = <0x68>;
};
};
};
… which created a warning like this:
[…]:236.4-17: Warning (reg_format): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
[…]: Warning (pci_device_reg): Failed prerequisite 'reg_format'
[…]: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
[…]: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
[…]/linux-6.6.25/arch/arm/boot/dts/microchip/sam9x60.dtsi:283.19-299.7: Warning (i2c_bus_bridge): /ahb/apb/flexcom@f0004000/i2c@600: incorrect #address-cells for I2C bus also defined at […]:228.16-238.4
[…]/linux-6.6.25/arch/arm/boot/dts/microchip/sam9x60.dtsi:283.19-299.7: Warning (i2c_bus_bridge): /ahb/apb/flexcom@f0004000/i2c@600: incorrect #size-cells for I2C bus also defined at […]:228.16-238.4
[…]: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
[…]: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge'
[…]: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
[…]:234.19-237.5: Warning (avoid_default_addr_size): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68: Relying on default #address-cells value
[…]:234.19-237.5: Warning (avoid_default_addr_size): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68: Relying on default #size-cells value
[…]: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
[…]: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
This probably should have been done with commit 84f23f3284d5 ("ARM: dts:
at91: sam9x60: move flexcom definitions") already, where those
address-cells and size-cells properties were left in the board .dts
files instead of moving them to the dtsi.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240528153109.439407-1-ada@thorsis.com
[claudiu.beznea: adjusted commit message as the properties are not
required anymore]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add config flag for sam9x7 SoC.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240729070916.1991370-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add SoC init config for sam9x7 family.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240729070705.1990557-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add support and pm init config for sam9x7 SoC.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20240729070659.1990506-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Enable config flags for SAM9X7 SoC for the sam9x7 SoC family.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240729070923.1991418-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The main boot sequence for Microchip AT91 devices is one of the
following:
1/ ROM BOOT -> AT91Bootstrap -> U-Boot -> Linux Kernel
2/ ROM BOOT -> AT91Bootstrap -> Linux Kernel
For case 1/ U-Boot is the stage where the Ethernet MAC addresses are set.
For case 2/ where U-Boot is skipped the Ethernet MAC addresses need to
be configured in Linux. For this add EEPROMs and nvmem-layout to describe
EUI48 MAC address regions.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[andrei.simion@microchip.com: Add nvmem-layout to describe eui48 mac
region. Align compatible name with datasheet. Reword commit message.]
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
[claudiu.beznea: adjusted the new commit message]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240703084704.197697-3-andrei.simion@microchip.com
|
|
Commit f1d6588af93b tried to convert GPIO lookup tables to software
properties for the vbus gpio device, bit forgot the most important
step: actually attaching the new properties to the device.
Also fix up the name of the property array to reflect the board name,
and add missing gpio/property.h and devices.h includes absence of which
causes compile failures on some configurations.
Switch "#ifdef CONFIG_USB_PXA25X" to "#if IS_ENABLED(CONFIG_USB_PXA25X)"
because it should not matter if the driver is buolt in or a module, it
still need vbus controls.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f1d6588af93b ("ARM: pxa/gumstix: convert vbus gpio to use software nodes")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Negate the values reported for the accelerometer z-axis in order to
match Documentation/devicetree/bindings/iio/mount-matrix.txt.
Fixes: 14a213dcb004 ("ARM: dts: n900: use iio driver for accelerometer")
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Reviewed-By: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20240722113137.3240847-1-absicsz@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The Ethernet refclock configuration is board specific and should
not be harcoded in machine code.
Remove it to align with the imx6ul commit e87f3be1c7f8 ("ARM: mach-imx:
imx6ul: remove not optional ethernet refclock overwrite").
Clearing bits 13 and 17 of GPR1 is the POR values, so this change
does not affect existing boards in mainline.
Tested on imx6sx-udoo-neo and imx6sx-sdb boards.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
By default, the ENET_REF is configured at 125MHz on i.MX6SX, which works
well for boards that operate in RGMII mode.
The imx6sx-udoo-neo has a KSZ8091 Ethernet PHY that is connected via
RMII interface, so a 50MHz ENET_REF clock is expected.
Describe the IMX6SX_CLK_ENET_REF accordingly.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and
regulator nodenames") renamed nodes and created 2 "clock-24000000" nodes
(at different paths).
The kernel can't handle these duplicate names even though they are at
different paths. Fix this by renaming one of the nodes to "clock-pclk".
This name is aligned with other Arm boards (those didn't have a known
frequency to use in the node name).
Fixes: 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and regulator nodenames")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Enable slab freelist metadata hardening, which in turn enables support
for allocation from separate kmalloc buckets. The latter is recommended
to be enabled, as per its help text.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/96fc3f0ed509b6364d8aeb297d5acf4abed18404.1722349907.git.geert+renesas@glider.be
|
|
A number of recent Broadcom STB SoCs utilize a GIC-600 interrupt
controller thus requiring the use of the GICv3 driver.
Link: https://lore.kernel.org/r/20240726233414.2305526-1-florian.fainelli@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Let the kmemdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://lore.kernel.org/r/20240606165104.3031737-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
I think the last use of this was removed somewhere
around the two:
Commit 755cbfd8cf89 ("ARM: OMAP2+: Drop sdma interrupt handling for
mach-omap2")
and
Commit 16630718ee46 ("ARM: omap1: move plat/dma.c to mach/omap-dma.c")
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://lore.kernel.org/r/20240505202214.623612-1-linux@treblig.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Bit clock and frame clock are provided by the mcasp. Change the
simple card settings regarding the clock provider and the mclk-fs for
usage with typical 44.1 kHz and 48 kHz sample rates.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://lore.kernel.org/r/20240730092353.10209-2-d.haller@phytec.de
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
RTS pin seems to have inverted behavior on am335x, other than expected
with default "rs485-rts-active-high" (instead of low on idle, high on send,
it is the opposite). Transceiver datasheet also suggests a pulldown.
Add includes to pin definitions that are used.
Signed-off-by: Steffen Hemer <s.hemer@phytec.de>
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://lore.kernel.org/r/20240730092353.10209-1-d.haller@phytec.de
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Use cleaner (and non-deprecated) bindings syntax. See commit
bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for
details.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240523042750.26238-1-zajec5@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Prior to commit df16c1c51d81 ("net: phy: mdio_device: Reset device only
when necessary") MDIO reset deasserts were performed twice during boot.
Now that the second deassert is no longer performed, device probe
failures happen due to the change in timing with the following error
message:
SMSC LAN8710/LAN8720: probe of 4a101000.mdio:00 failed with error -5
Restore the original effective timing, which resolves the probe
failures.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20240531183817.2698445-1-colin.foster@in-advantage.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The serial console settings in the chosen node are device-specific,
not SoC-specific. Move the chosen node out of bcm21664.dtsi and into
the only DTS that uses it, bcm21664-garnet.dts.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20240729-bcm21664-common-v2-1-ebc21a89bf63@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Use cleaner (and non-deprecated) bindings syntax. See commit
bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for
details.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240516084737.2789-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Due to inter-branch dependencies, it was necessary to add the rk3128
sfc controller with its hclk_sfc using the numeric clock id value
instead of the nicer constant from the binding.
Now that it's available, change over to this constant.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240623215631.440399-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Pull ARM updates from Russell King:
- ftrace: don't assume stack frames are contiguous in memory
- remove unused mod_inwind_map structure
- spelling fixes
- allow use of LD dead code/data elimination
- fix callchain_trace() return value
- add support for stackleak gcc plugin
- correct some reset asm function prototypes for CFI
[ Missed the merge window because Russell forgot to push out ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9408/1: mm: CFI: Fix some erroneous reset prototypes
ARM: 9407/1: Add support for STACKLEAK gcc plugin
ARM: 9406/1: Fix callchain_trace() return value
ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
ARM: 9403/1: Alpine: Spelling s/initialiing/initializing/
ARM: 9402/1: Kconfig: Spelling s/Cortex A-/Cortex-A/
ARM: 9400/1: Remove unused struct 'mod_unwind_map'
|
|
The wlf-gf-module driver doesn't use the driver_data member of struct
i2c_device_id, so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240708152530.19306-2-u.kleine-koenig@baylibre.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Correct the clock-names in the AHCI SATA controller node to adhere to
the bindings.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240717094914.17931-2-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Remove the reg-names property in the sata-phy node as it is not present
in the bindings and is not required by the driver.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240715130854.53501-3-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add pstore node to allow for retrieving crash logs.
Signed-off-by: Bingwu Zhang <xtexchooser@duck.com>
Link: https://lore.kernel.org/r/20240715122201.345426-2-xtex@envs.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pass dtbs_check for qcom,ipq4019-pinctrl.yaml.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240711110545.31641-7-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pass dtbs_check for qcom,ipq8064-pinctrl.yaml.
Also remove invalid "bias-none" property, which I have assumed to mean
"bias-disable".
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240711110545.31641-6-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pass dtbs_check for qcom,apq8064-pinctrl.yaml.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240711110545.31641-5-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Remove duplicate handle to i2c pins in the device tree, as they are
already set in qcom-apq8064.dtsi.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240711110545.31641-4-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The "drive-strength" property was incorrectly spelt as "drive-strengh".
Correct this.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240711110545.31641-3-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Wrap existing pwrkey node inside a pon node, to conform to dt schema.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Link: https://lore.kernel.org/r/20240725-pmic-bindings-v3-3-d7f6007b530d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
|
