summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-09-05Merge branch 'pnx4008-removal' of git://git.antcom.de/linux-2.6 into ↵Olof Johansson
next/cleanup Removes the pnx4008 platform support, which hasn't seen any active development since 2006 and seems to be unused these days. * 'pnx4008-removal' of git://git.antcom.de/linux-2.6: ARM: mach-pnx4008: Remove architecture
2012-09-05Merge branch 'ag5evm' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup * 'ag5evm' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: mach-shmobile: remove duplicated include from board-ag5evm.c
2012-09-05Merge tag 'ks8695-time-for-arm-soc' of ↵Olof Johansson
http://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/cleanup This cleans up the ks8695 timer driver and converts it to use generic time and clock events. * tag 'ks8695-time-for-arm-soc' of http://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ks8695: convert to generic time and clocksource ARM: ks8695: delete resume hook from timer ARM: ks8695: use [readl|writel]_relaxed() ARM: ks8695: merge the timer header into the timer driver
2012-09-05ARM: ks8695: convert to generic time and clocksourceLinus Walleij
Old platforms using ancient gettimeoffset() and other arcane APIs are standing in the way of cleaning up the ARM kernel. The gettimeoffset() was also broken: it would try to read out the timer counter value, while this would not work (the counter statically returns the initially programmed value) so the implementation would anyway fall back to a homebrew version of jiffie calculation. This is an attempt at blind-coding a generic time and clocksource driver for the platform by way of a datasheet and looking at the old code. Tested-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-05ARM: ks8695: delete resume hook from timerLinus Walleij
This system does not support suspend/resume so let's skip this hook altogether. Tested-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-05ARM: ks8695: use [readl|writel]_relaxed()Linus Walleij
I have no clue why __raw* macros are used here, but I strongly suspect there is no good reason at all for this, so removing another bad example. Tested-by: Greg Ungerer <gerg@snapgear.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-05ARM: ks8695: merge the timer header into the timer driverLinus Walleij
This <mach/regs-timer.h> is broadcasted in the entire kernel for no good reason, since it's only used by the timer driver. Merge it into the driver. Tested-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-04Merge tag 'arm-perf-3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into next/cleanup From Will Deacon: Bunch of perf updates for the ARM backend that pave the way for big.LITTLE support in the future. The separation of CPU and PMU code is also the start of being able to move some of this stuff under drivers/. * tag 'arm-perf-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: ARM: perf: move irq registration into pmu implementation ARM: perf: move CPU-specific PMU handling code into separate file ARM: perf: prepare for moving CPU PMU code into separate file ARM: perf: probe devicetree in preference to current CPU ARM: perf: remove mysterious compiler barrier ARM: pmu: remove arm_pmu_type enumeration ARM: pmu: remove unused reservation mechanism ARM: perf: add devicetree bindings for 11MPcore, A5, A7 and A15 PMUs ARM: PMU: Add runtime PM Support
2012-09-04Merge branch 'marco-prepare' of ↵Olof Johansson
git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/cleanup * 'marco-prepare' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel: ARM: SIRF: make sirf irqchip driver optional since new SoCs will have GIC ARM: PRIMA2: adjust Kconfig to support select SoC features ARM: PRIMA2: use DT_MACHINE_START and convert to generic board clk: prima2: move from arch/arm/mach to drivers/clk ARM: PRIMA2: convert to common clk and finish full clk tree
2012-09-04Merge branch 'cleanup/io-pci' into next/cleanupArnd Bergmann
The io-pci series has gained a merge to resolve a nontrivial conflict. * cleanup/io-pci: ARM: Fix ioremap() of address zero Also includes an update to Linux 3.6-rc3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-04Merge commit 'a849088aa1' from rmk/fixes into cleanup/io-pciArnd Bergmann
As Stephen Rothwell reports, a849088aa155 ("ARM: Fix ioremap() of address zero") from the arm-current tree and commit c2794437091a ("ARM: Add fixed PCI i/o mapping") from the arm-soc tree conflict in a nontrivial way in arch/arm/mm/mmu.c. Rob Herring explains: The PCI i/o reserved area has a dummy physical address of 0 and needs to be skipped by ioremap searches. So we don't set VM_ARM_STATIC_MAPPING to prevent matches by ioremap. The vm_struct settings don't really matter when we do the real mapping of the i/o space. Since commit a849088aa155 is at the start of the fixes branch in the arm tree, we can merge it into the branch that contains the other ioremap changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-31ARM: mach-shmobile: remove duplicated include from board-ag5evm.cWei Yongjun
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-28ARM: SIRF: make sirf irqchip driver optional since new SoCs will have GICBarry Song
New MARCO and POLO SoC use GIC, so make irq.c optional and enable it only if we enable ARCH_PRIMA2 in Kconfig Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-08-28ARM: PRIMA2: adjust Kconfig to support select SoC featuresBarry Song
Now we have primaII, but will include Marco and Polo in mach-prima2 as well. We add Kconfig menu so that we can select necessary SoC features. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-08-28ARM: PRIMA2: use DT_MACHINE_START and convert to generic boardBarry Song
we will have SiRFMarco and SiRFPolo, all of them will be in the generic board. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-08-26ARM: mach-pnx4008: Remove architectureRoland Stigge
This patch removes the ARM architecture mach-pnx4008. No direct support or user feedback since 2006. Acknowledgements from NXP/Philips and Linux arm-soc maintainers. Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-08-25ARM: Fix ioremap() of address zeroRussell King
Murali Nalajala reports a regression that ioremapping address zero results in an oops dump: Unable to handle kernel paging request at virtual address fa200000 pgd = d4f80000 [fa200000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-g3b5f728-00009-g638207a #13) PC is at msm_pm_config_rst_vector_before_pc+0x8/0x30 LR is at msm_pm_boot_config_before_pc+0x18/0x20 pc : [<c0078f84>] lr : [<c007903c>] psr: a0000093 sp : c0837ef0 ip : cfe00000 fp : 0000000d r10: da7efc17 r9 : 225c4278 r8 : 00000006 r7 : 0003c000 r6 : c085c824 r5 : 00000001 r4 : fa101000 r3 : fa200000 r2 : c095080c r1 : 002250fc r0 : 00000000 Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 25180059 DAC: 00000015 [<c0078f84>] (msm_pm_config_rst_vector_before_pc+0x8/0x30) from [<c007903c>] (msm_pm_boot_config_before_pc+0x18/0x20) [<c007903c>] (msm_pm_boot_config_before_pc+0x18/0x20) from [<c007a55c>] (msm_pm_power_collapse+0x410/0xb04) [<c007a55c>] (msm_pm_power_collapse+0x410/0xb04) from [<c007b17c>] (arch_idle+0x294/0x3e0) [<c007b17c>] (arch_idle+0x294/0x3e0) from [<c000eed8>] (default_idle+0x18/0x2c) [<c000eed8>] (default_idle+0x18/0x2c) from [<c000f254>] (cpu_idle+0x90/0xe4) [<c000f254>] (cpu_idle+0x90/0xe4) from [<c057231c>] (rest_init+0x88/0xa0) [<c057231c>] (rest_init+0x88/0xa0) from [<c07ff890>] (start_kernel+0x3a8/0x40c) Code: c0704256 e12fff1e e59f2020 e5923000 (e5930000) This is caused by the 'reserved' entries which we insert (see 19b52abe3c5d7 - ARM: 7438/1: fill possible PMD empty section gaps) which get matched for physical address zero. Resolve this by marking these reserved entries with a different flag. Cc: <stable@vger.kernel.org> Tested-by: Murali Nalajala <mnalajal@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-24clk: prima2: move from arch/arm/mach to drivers/clkBarry Song
Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-24ARM: PRIMA2: convert to common clk and finish full clk treeBinghua Duan
Commit 02c981c07bc95ac1e only implements a little part of primaII clk tree due to common clk framework was not ready at that time. This patch converts the old driver to common clk and finish the full clk tree. Signed-off-by: Binghua Duan <Binghua.Duan@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-23ARM: perf: move irq registration into pmu implementationSudeep KarkadaNagesha
This patch moves the CPU-specific IRQ registration and parsing code into the CPU PMU backend. This is required because a PMU may have more than one interrupt, which in turn can be either PPI (per-cpu) or SPI (requiring strict affinity setting at the interrupt distributor). Signed-off-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com> [will: cosmetic edits and reworked interrupt dispatching] Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23ARM: perf: move CPU-specific PMU handling code into separate fileWill Deacon
This patch moves the CPU-specific PMU handling code out of perf_event.c and into perf_event_cpu.c. Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23ARM: perf: prepare for moving CPU PMU code into separate fileWill Deacon
The CPU PMU code is tightly coupled with generic ARM PMU handling code. This makes it cumbersome when trying to add support for other ARM PMUs (e.g. interconnect, L2 cache controller, bus) as the generic parts of the code are not readily reusable. This patch cleans up perf_event.c so that reusable code is exposed via header files to other potential PMU drivers. The CPU code is consistently named to identify it as such and also to prepare for moving it into a separate file. Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23ARM: perf: probe devicetree in preference to current CPUWill Deacon
The CPU PMU is probed using the current cpuid information as part of the early_initcall initialising the architecture perf backend. For architectures without NMI (such as ARM), this does not need to be performed early and can be deferred to the driver probe callback. This also allows us to probe the devicetree in preference to parsing the current cpuid, which may be invalid on a big.LITTLE multi-cluster system. This patch defers the PMU probing and uses the devicetree information when available. Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23ARM: perf: remove mysterious compiler barrierWill Deacon
There's a rather strange compiler barrier in the PMU disabling code which was presumably placed there by aliens. There's no valid reason for the barrier and one can only suspect that it's up to no good. This patch removes it before it has a chance to spread. Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23ARM: pmu: remove arm_pmu_type enumerationSudeep KarkadaNagesha
The arm_pmu_type enumeration was initially introduced to identify different PMU types in the system, the usual one being that on the CPU (ARM_PMU_DEVICE_CPU). With the removal of the PMU reservation code and the introduction of devicetree bindings for the CPU PMU, the enumeration is no longer required. This patch removes the enumeration and updates the various CPU PMU platform devices so that they no longer pass an .id field referring to identify the PMU type. Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com> [will: cosmetic edits and actual removal of the enum type] Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23ARM: pmu: remove unused reservation mechanismWill Deacon
The PMU reservation mechanism was originally intended to allow OProfile and perf-events to co-ordinate over access to the CPU PMU. Since then, OProfile for ARM has moved to using perf as its backend, so the reservation code is no longer used. This patch removes the reservation code for the CPU PMU on ARM. Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23ARM: perf: add devicetree bindings for 11MPcore, A5, A7 and A15 PMUsWill Deacon
This patch adds separate devicetree bindings for 11MPcore and Cortex-{A5,A7,A15} PMUs in preparation for improved devicetree parsing in the ARM perf-event CPU PMU driver. Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23ARM: PMU: Add runtime PM SupportJon Hunter
Add runtime PM support to the ARM PMU driver so that devices such as OMAP supporting dynamic PM can use the platform->runtime_* hooks to initialise hardware at runtime. Without having these runtime PM hooks in place any configuration of the PMU hardware would be lost when low power states are entered and hence would prevent PMU from working. This change also replaces the PMU platform functions enable_irq and disable_irq added by Ming Lei with runtime_resume and runtime_suspend funtions. Ming had added the enable_irq and disable_irq functions as a method to configure the cross trigger interface on OMAP4 for routing the PMU interrupts. By adding runtime PM support, we can move the code called by enable_irq and disable_irq into the runtime PM callbacks runtime_resume and runtime_suspend. Cc: Ming Lei <ming.lei@canonical.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-18Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "The largest thing in this set of changes is bringing back some of the ARMv3 code to fix a compile problem noticed on RiscPC, which we still support, even though we only support ARMv4 there. (The reason is that the system bus doesn't support ARMv4 half-word accesses, so we need the ARMv3 library code for this platform.) The rest are all quite minor fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7490/1: Drop duplicate select for GENERIC_IRQ_PROBE ARM: Bring back ARMv3 IO and user access code ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems ARM: 7488/1: mm: use 5 bits for swapfile type encoding ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't present ARM: 7486/1: sched_clock: update epoch_cyc on resume ARM: 7484/1: Don't enable GENERIC_LOCKBREAK with ticket spinlocks ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology
2012-08-15Merge branch 'u300-cleanup' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/cleanup From Linus Walleij <linus.walleij@linaro.org> This patch set does a number of cleanups and a minor improvement to U300, paving the way for single zImage and device tree: - Deprecate ancient platforms to make the following patches easier to make... - Move out one header to platform data and one to the mach-u300 proper to depopulate <mach/*> - Consolidate core machine files - Convert to sparse IRQs * 'u300-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: u300: convert to sparse IRQs ARM: u300: move DMA channel header into mach-u300 ARM: u300: delete remnant clkdev.h file ARM: u300: merge u300.c into core.c and rid headers pinctrl/coh901: move header to platform data dir pinctrl/coh901: retire ancient GPIO block versions ARM: u300: retire ancient platforms Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-15ARM: 7490/1: Drop duplicate select for GENERIC_IRQ_PROBEStephen Boyd
Seems that Thomas' and my patches collided during the last merge window. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-13Merge branch 'testing/bcmring' into next/cleanupsArnd Bergmann
This attempts to get the bcmring platform better in line with the other platforms. Moving the header files below mach/ helps with the future reorganization for multiplatform kernels, and using MMIO accessors is generally the right thing. * testing/bcmring: ARM: bcmring: use proper MMIO accessors ARM: bcmring: remove include/csp/ subdir ARM: bcmring: move cfg_global header to mach/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-13Merge branch 'cleanup/io-pci' into next/cleanupsArnd Bergmann
From Rob Herring <robherring2@gmail.com>: This is the 2nd part of mach/io.h removals. This series removes io.h on platforms with PCI by creating a fixed virtual I/O mapping and a common __io() macro. This version has changed a bit to accommodate Tegra converting its PCIe host to a platform driver. Now the virtual space is only reserved during early boot before .map_io() is called. The mapping is not created until calling pci_ioremap_io which can be done at any point after vmalloc is initialized. I've gone back to fixed 64K windows for each PCI bus. This allows removing all the i/o resource setup from the individually platforms and placing it within the common ARM PCI code. I've only tested versatilepb under qemu (with the model hacked up to actually enable i/o space), so any testing is appreciated. iop3xx and mv78xx0 have some risk of breaking as the PCI bus addresses are moved to 0 from matching the cpu host bus addesss. * cleanup/io-pci: ARM: iop3xx: use fixed PCI i/o mapping ARM: mv78xx0: use fixed pci i/o mapping ARM: iop13xx: use fixed PCI i/o mapping iop13xx: use more regular PCI I/O space handling ARM: orion5x: use fixed PCI i/o mapping ARM: kirkwood: use fixed PCI i/o mapping ARM: dove: use fixed PCI i/o mapping ARM: footbridge: use fixed PCI i/o mapping ARM: shark: use fixed PCI i/o mapping ARM: integrator: remove trailing whitespace on pci_v3.c ARM: integrator: use fixed PCI i/o mapping ARM: tegra: use fixed PCI i/o mapping ARM: versatile: use fixed PCI i/o mapping ARM: move PCI i/o resource setup into common code ARM: Add fixed PCI i/o mapping i2c: iop3xx: use standard gpiolib functions i2c: iop3xx: clean-up trailing whitespace Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-13ARM: u300: convert to sparse IRQsLinus Walleij
This converts the U300 to use sparse IRQs, which is simple now that the number of machines are reduced. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-13ARM: u300: move DMA channel header into mach-u300Linus Walleij
We were broadcasting <mach/dma_channels.h> to the entire kernel for no reason at all, push this down into the machine folder where it belongs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-13ARM: u300: delete remnant clkdev.h fileLinus Walleij
The U300 now uses common clk, delete this leftover. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-13ARM: u300: merge u300.c into core.c and rid headersLinus Walleij
This gets rid of the separate u300.c file in mach-u300 since it can just as well live right in core.c, then we also get rid of the broadcasted <mach/platform.h> file that is not helping anyone. Put the interface to the system timer into a separate header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-13pinctrl/coh901: move header to platform data dirLinus Walleij
Move the platform-specific COH901 pin control header out of the ARM tree and down into the proper platform data include directory. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-13pinctrl/coh901: retire ancient GPIO block versionsLinus Walleij
As the non-U335 U300 variants are retired from the ARM tree, also delete the pinctrl driver codepaths for these variants. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-13ARM: u300: retire ancient platformsLinus Walleij
This retires the B26/S26, B330/S330 and B365/S365 boards from the U300 platform. The only board really used anywhere today is the S335 so let's concentrate any efforts on that one board. Also the board variants are selected at compile-time, which is strictly a no-no these days, if multi-board support is to be brought back it need to happen using run-time and device tree. My work on ARM Linux started on the B26/S26 so it's a bit sad to see it go, but there is a time to move on with all things in life. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-13ARM: Bring back ARMv3 IO and user access codeRussell King
This partially reverts 357c9c1f07d4546bc3fbc0fd1044d96b114d14ed (ARM: Remove support for ARMv3 ARM610 and ARM710 CPUs). Although we only support StrongARM on the RiscPC, we need to keep the ARMv3 user access code for this platform because the bus does not understand half-word load/stores. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-12Merge tag 'gpio-fixes-v3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: - Fix a resource leak in the SCH driver - Fix the register address calculation in the MSIC driver - Fix the PXA driver's devicetree functions - Delete redundant shadow variable leftovers in the MXC driver - Specify the GPIO base for the device tree probe in the MXC driver - Add a modalias for the i.MX driver - Fix off-by-one bug in the Samsung driver - Fix erroneous errorpath in the Langwell driver * tag 'gpio-fixes-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: drivers/gpio/gpio-langwell.c: fix error return code gpio: samsung: Fix off-by-one bug in gpio addresses ARM: dts: imx: add alias for gpio gpio/mxc: specify gpio base for device tree probe gpio/mxc: remove redundant shadow variables initialization GPIO: gpio-pxa: fix devicetree functions gpio: msic: Fix calculating register address in msic_gpio_to_oreg() gpio-sch: Fix leak of resource
2012-08-12Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc bug fixes from Arnd Bergmann: "These are a bunch of bug fixes that came in after the merge window and one update for the MAINTAINERS file. The largest part of the fixes are patches that address bugs found by building all the ARM defconfig files. There are a lot more warnings that we have patches for, but the others are either still under discussion or are harmless and do not cause actual problems besides making the build slightly noisy." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits) ARM: davinci: remove broken ntosd2_init_i2c ARM: s3c24xx: enable CONFIG_BUG for tct_hammer omap-rng: fix use of SIMPLE_DEV_PM_OPS spi/s3c64xx: improve error handling mtd/omap2: fix dmaengine_slave_config error handling gpio: em: do not discard em_gio_irq_domain_cleanup ARM: exynos: exynos_pm_add_dev_to_genpd may be unused ARM: imx: gpmi-nand depends on mxs-dma ARM: integrator: include <linux/export.h> ARM: s3c24xx: use new PWM driver ARM: sa1100: include linux/io.h in hackkit leds code Input: eeti_ts: pass gpio value instead of IRQ ARM: pxa: remove irq_to_gpio from ezx-pcap driver ARM: tegra: more regulator fixes for Harmony usb/ohci-omap: remove unused variable mfd/asic3: fix asic3_mfd_probe return value ARM: kirkwood: fix typo in Makefile.boot i.MX27: Fix emma-prp and csi clocks. ARM: integrator: use clk_prepare_enable() for timer MAINTAINERS: update entry for Linus Walleij ...
2012-08-11ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systemsWill Deacon
Commit 5a783cbc4836 ("ARM: 7478/1: errata: extend workaround for erratum #720789") added workarounds for erratum #720789 to the range TLB invalidation functions with the observation that the erratum only affects SMP platforms. However, when running an SMP_ON_UP kernel on a uniprocessor platform we must take care to preserve the ASID as the workaround is not required. This patch ensures that we don't set the ASID to 0 when flushing the TLB on such a system, preserving the original behaviour with the workaround disabled. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-11ARM: 7488/1: mm: use 5 bits for swapfile type encodingWill Deacon
Page migration encodes the pfn in the offset field of a swp_entry_t. For LPAE, we support physical addresses of up to 36 bits (due to sparsemem limitations with the size of page flags), requiring 24 bits to represent a pfn. A further 3 bits are used to encode a swp_entry into a pte, leaving 5 bits for the type field. Furthermore, the core code defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not get used. This patch reduces the width of the type field to 5 bits, allowing us to create up to 31 swapfiles of 64GB each. Cc: <stable@vger.kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-11ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't presentWill Deacon
Swap entries are encoding in ptes such that !pte_present(pte) and pte_file(pte). The remaining bits of the descriptor are used to identify the swapfile and offset within it to the swap entry. When writing such a pte for a user virtual address, set_pte_at unconditionally sets the nG bit, which (in the case of LPAE) will corrupt the swapfile offset and lead to a BUG: [ 140.494067] swap_free: Unused swap offset entry 000763b4 [ 140.509989] BUG: Bad page map in process rs:main Q:Reg pte:0ec76800 pmd:8f92e003 This patch fixes the problem by only setting the nG bit for user mappings that are actually present. Cc: <stable@vger.kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-11ARM: 7486/1: sched_clock: update epoch_cyc on resumeColin Cross
Many clocks that are used to provide sched_clock will reset during suspend. If read_sched_clock returns 0 after suspend, sched_clock will appear to jump forward. This patch resets cd.epoch_cyc to the current value of read_sched_clock during resume, which causes sched_clock() just after suspend to return the same value as sched_clock() just before suspend. In addition, during the window where epoch_ns has been updated before suspend, but epoch_cyc has not been updated after suspend, it is unknown whether the clock has reset or not, and sched_clock() could return a bogus value. Add a suspended flag, and return the pre-suspend epoch_ns value during this period. The new behavior is triggered by calling setup_sched_clock_needs_suspend instead of setup_sched_clock. Signed-off-by: Colin Cross <ccross@android.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-11ARM: 7484/1: Don't enable GENERIC_LOCKBREAK with ticket spinlocksStephen Boyd
Now that ARM has implemented its spinlocks with tickets we don't need to use the generic lockbreak algorithm. Remove the Kconfig from ARM so that we use the arch_spin_is_contended() definition from the asm header. This also saves a word in each lock because we don't need the break_lock member anymore. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-11ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabledWill Deacon
VFPv4 support depends on the VFPv3 context save/restore code, so only advertise support in the hwcaps if the kernel can actually handle it. Cc: <stable@vger.kernel.org> # 3.1+ Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-11ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topologyVenkatraman Sathiyamoorthy
Get rid of this warning.. arch/arm/kernel/built-in.o(.text+0xac78): Section mismatch in reference from the function init_cpu_topology() to the function .init.text:parse_dt_topology() The function init_cpu_topology() references the function __init parse_dt_topology(). This is often because init_cpu_topology lacks a __init annotation or the annotation of parse_dt_topology is wrong. Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-04-07 01:19:48 +0000