summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf538
AgeCommit message (Collapse)Author
2009-06-13Blackfin: define SPI IRQ in board resourcesYi Li
The Blackfin SPI driver can be driven by an IRQ now, so declare it in the board resources. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add support for gptimer0 as a tick sourceGraf Yang
For systems where the core cycles are not a usable tick source (like SMP or cycles gets updated), enable gptimer0 as an alternative. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add MDMA defines to make cross-variant coding easierGraf Yang
Add some defines to make the BF538/BF561 look like most other Blackfin parts in that it has a MDMA0 channel available for low level init. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: pull updated anomaly lists from toolchainMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12Blackfin: fix parentheses balance and convert some tab/space mixingMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-04-07tty: Blackin CTS/RTSSonic Zhang
Both software emulated and hardware based CTS and RTS are enabled in serial driver. The CTS RTS PIN connection on BF548 UART port is defined as a modem device not as a host device. In order to test it under Linux, please nake a cross UART cable to exchange CTS and RTS signal. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-06Blackfin arch: add stubs for anomalies 447 and 448Mike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-04Blackfin arch: update anomaly sheets to match latest public infoMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03Blackfin arch: fix bug - Error if one serial has hardware flow control and ↵Tom Parker
the other doesn't I have a system where UART0 is configured with hardware flow control, but UART1 doesn't have it enabled. Attempting to access UART1 in this configuration results in the following error in dmesg: <3>bfin-gpio: GPIO 0 is already reserved as Peripheral by bfin-uart ! <5>Stack from 0082bc7c: <5> 0082bc88 00404dd6 00000003 00000000 0054051e 004079da 0082bcb4 00000000 <5> 00000003 00000000 0052686c 0113f2a0 005fa3f0 00000032 20515249 00003035 <5> 00427228 00526e50 0113f2e0 005fa3f0 00000032 0113f2e0 0054b748 0000ffff <5> 22222222 22222222 004e1628 00427304 00000000 00000032 00000023 0054b748 <5> 00487a94 0054b7e8 0054b748 0000000b 00487fb8 0054b748 0054b748 00000001 <5> 0000000a 005fa3f0 009d4fe8 0101e3c0 0054b748 005fa3f0 0050b134 0054b748 <5> <5>Call Trace: <4>[<00485c16>] _uart_startup+0x56/0x178 <4>[<004865c8>] _uart_open+0x40/0x3e0 <4>[<0048661c>] _uart_open+0x94/0x3e0 <4>[<0047f1ce>] _init_dev+0x1fa/0x450 <4>[<004e1628>] ___mutex_unlock_slowpath+0x30/0xe8 <4>[<004815da>] _tty_open+0xf6/0x21c <4>[<0043dab0>] ___path_lookup_intent_open+0x34/0x7c <4>[<004375e4>] _chrdev_open+0x7c/0x134 <4>[<0043dc2c>] _open_namei+0x60/0x568 <4>[<00433fa2>] ___dentry_open+0x9e/0x188 <4>[<00437568>] _chrdev_open+0x0/0x134 <4>[<0043410c>] _nameidata_to_filp+0x30/0x3c <4>[<00434152>] _do_filp_open+0x3a/0x44 <4>[<00408826>] _task_running_tick+0x102/0x278 <4>[<0043418e>] _do_sys_open+0x32/0xac <4>[<0043ede4>] _sys_ioctl+0x28/0x50 <4>[<0043edbc>] _sys_ioctl+0x0/0x50 <4>[<00434224>] _sys_open+0x18/0x20 <4>[<0043420c>] _sys_open+0x0/0x20 <4>[<00418174>] _sys_setuid+0x0/0xc8 This is because the #ifdef's in bfin_serial_5xx.h are messed up. More specifically, they add/remove the uart_{rts,cts}_pin fields in bfin_serial_resources based on whether the particular port has rts/cts enabled, as opposed to when either port has it enabled. This patch fixed this. Signed-off-by: Tom Parker <blackfin@tevp.net> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03Blackfin arch: fix compile failure when missing the anomaly definitionMike Frysinger
make sure ANOMALY_05000278/ANOMALY_05000380 is defined for all parts Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrdSonic Zhang
[Mike Frysinger <vapier.adi@gmail.com>: - setup P_DEFAULT_BOOT_SPI_CS for every arch based on the default bootrom behavior and convert all our boards to it - revert previous anomaly change ... bf51x is not affected by anomaly 05000353] Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: merge adeos blackfin part to arch/blackfin/Yi Li
[Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: update anomaly headers to match latest sheetsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Remove wasted SIR header filesGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Modify bfin_sir device configuration to board fileGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add bfin_read_MDMA_S0_CONFIG compat for dma_memcpyMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: cleanup - use scm for changelog, not file headersMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: rename MAX_BLACKFIN_DMA_CHANNEL to MAX_DMA_CHANNELS to match ↵Mike Frysinger
everyone else Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: smp patch cleanup from LKML reviewGraf Yang
1. Use inline get_l1_... functions instead of macro 2. Fix compile issue about smp barrier functions Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: gpio.h split into machine subfolders like already done for BF54xMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: fix bugs and unify BFIN_KERNEL_CLOCK optionMichael Hennerich
- remove duplicated code and headers - add option allowing arbitrary SDRAM/DDR Timing parameters. - mark automatically calculated timings as EXPERIMENTAL - fix comment header block Related to BUGs: - kernel boot up fails with CONFIG_BFIN_KERNEL_CLOCK item on. - kernel does not boot if re-program clocks [ Mike Frysinger <vapier.adi@gmail.com> - fix comment header - mark do_sync static - document the DMA shutdown - simplify SIC_IWR handling - fix ANOMALY_05000265 handling to work as intended ] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add simple-gpio resources to all adi/tinyboardsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: add ANOMALY_05000435 to our headersMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: move out irq related functionsMike Frysinger
move irq related functions into asm/irq.h and out of the mondo asm/system.h Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: delay PLL_CTL/VR_CTL wrappersMike Frysinger
Delay PLL_CTL/VR_CTL wrappers as much as possible to avoid the inter-dependency problems with cdef and common headers Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: make ADI board names consistentMike Frysinger
Cc: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: SMP supporting patchset: some other misc codeGraf Yang
Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to some other misc code Singed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: update anomaly lists to match latest sheetsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: put quotes around error to silence a ton of warnings from gcc-4.3Mike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: BF538/9 Linux kernel SupportMichael Hennerich
Add supporing for Blackfin BF538 and BF539 processors. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-22 11:12:19 +0000