summaryrefslogtreecommitdiff
path: root/arch/c6x/boot
AgeCommit message (Collapse)Author
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02c6x: enable building all dtbsRob Herring
Enable the 'dtbs' target for c6x. This allows building all the dts files in arch/c6x/boot/dts/ for enabled platforms or when COMPILE_TEST and OF_ALL_DTBS are enabled. Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: linux-c6x-dev@linux-c6x.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-02c6x: use common built-in dtb supportRob Herring
Using the common build support for built-in dtb files just requires adding a .dtb.o target to obj-y. The dtb now needs to be copied when unflattened because an init section is used now. Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: linux-c6x-dev@linux-c6x.org Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03c6x: use new common dtc ruleStephen Warren
The current rules have the .dtb files build in a different directory from the .dts files. This patch changes c6x to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. This requires moving parts of arch/c6x/boot/Makefile into newly created arch/c6x/boot/dts/Makefile, and updating arch/c6x/Makefile to call the new Makefile. linked_dtb.S is also moved into boot/dts/ since it's used by rules that were moved. Acked-by: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: linux-c6x-dev@linux-c6x.org Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-07-18C6X: add basic support for TMS320C6678 SoCKen Cox
This patch adds support for the TMS320C6678 SoC on an EVMC6678LE evaluation board. The 6678 is a C66x family CPU which is very similar to the already supported C64x CPUs with the addition of floating point instructions. Signed-off-by: Ken Cox <jkc@redhat.com> Signed-off-by: Mark Salter <msalter@redhat.com> CC: Aurelien Jacquiot <a-jacquiot@ti.com> CC: linux-c6x-dev@linux-c6x.org
2012-02-14Kbuild: Use dtc's -d (dependency) optionStephen Warren
This hooks dtc into Kbuild's dependency system. Thus, for example, "make dtbs" will rebuild tegra-harmony.dtb if only tegra20.dtsi has changed yet tegra-harmony.dts has not. The previous lack of this feature recently caused me to have very confusing "git bisect" results. For ARM, it's obvious what to add to $(targets). I'm not familiar enough with other architectures to know what to add there. Powerpc appears to already add various .dtb files into $(targets), but the other archs may need something added to $(targets) to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Mark Salter <msalter@redhat.com>
2011-10-06C6X: devicetree supportMark Salter
This is the basic devicetree support for C6X. Currently, four boards are supported. Each one uses a different SoC part. Two of the four supported SoCs are multicore. One with 3 cores and the other with 6 cores. There is no coherency between the core-level caches, so SMP is not an option. It is possible to run separate kernel instances on the various cores. There is currently no C6X bootloader support for device trees so we build in the DTB for now. There are some interesting twists to the hardware which are of note for device tree support. Each core has its own interrupt controller which is controlled by special purpose core registers. This core controller provides 12 general purpose prioritized interrupt sources. Each core is contained within a hardware "module" which provides L1 and L2 caches, power control, and another interrupt controller which cascades into the core interrupt controller. These core module functions are controlled by memory mapped registers. The addresses for these registers are the same for each core. That is, when coreN accesses a module-level MMIO register at a given address, it accesses the register for coreN even though other cores would use the same address to access the register in the module containing those cores. Other hardware modules (timers, enet, etc) which are memory mapped can be accessed by all cores. The timers need some further explanation for multicore SoCs. Even though all timer control registers are visible to all cores, interrupt routing or other considerations may make a given timer more suitable for use by a core than some other timer. Because of this and the desire to have the same image run on more than one core, the timer nodes have a "ti,core-mask" property which is used by the driver to scan for a suitable timer to use. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: build infrastructureAurelien Jacquiot
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>