summaryrefslogtreecommitdiff
path: root/arch/m68k/atari
AgeCommit message (Collapse)Author
2021-06-10m68k/q40: Replace q40ide driver with pata_falcon and falconideFinn Thain
This allows m68k q40 systems to switch from the deprecated IDE subsystem to libata. Enhance the byte-swapping falconide and pata_falcon platform drivers to accept an irq resource, for use on q40. Atari ST-DMA IRQ arrangements seem to co-exist with q40 IRQ arrangements without too much mess. The new IO resources were added solely for the purpose of making request_region() reservations identical to those made by q40ide: these regions aren't used for actual IO. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Richard Zidlicky <rz@linux-m68k.org> Reviewed-and-tested-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/eefb7e9c2291e09fb4e065ce06bc105f05bb9e06.1623287706.git.fthain@linux-m68k.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-07treewide: remove editor modelines and cruftMasahiro Yamada
The section "19) Editor modelines and other cruft" in Documentation/process/coding-style.rst clearly says, "Do not include any of these in source files." I recently receive a patch to explicitly add a new one. Let's do treewide cleanups, otherwise some people follow the existing code and attempt to upstream their favoriate editor setups. It is even nicer if scripts/checkpatch.pl can check it. If we like to impose coding style in an editor-independent manner, I think editorconfig (patch [1]) is a saner solution. [1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/ Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-11-02m68k: Remove unused mach_max_dma_addressLaurent Vivier
This information is unused since the discontinuous memory support has been introduced in 2007. Fixes: 12d810c1b8c2 ("m68k: discontinuous memory support") Signed-off-by: Laurent Vivier <laurent@vivier.eu> Link: https://lore.kernel.org/r/20201009095621.833192-1-laurent@vivier.eu Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-10-30m68k: remove timer_interrupt() functionArnd Bergmann
This gets passed to a number of init functions, but is ignored everywhere, so remove the function and change the mach_sched_init callback to take no arguments. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-30m68k: change remaining timers to legacy_timer_tickArnd Bergmann
There are nine more machines that each have their own timer interrupt calling the m68k timer_interrupt() function through an indirect pointer. This function is now the same as legacy_timer_tick, so just call that directly and select the corresponding Kconfig symbol. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-30m68k: split heartbeat out of timer functionArnd Bergmann
The heartbeat functionality is mostly separate from the actual timer interrupt handling, and it is only used on five platforms. Split it out into a separate function and call that directly from the timer irq on those platforms. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-18m68k/atari: Convert Falcon IDE drivers to platform driversMichael Schmitz
Autoloading of Falcon IDE driver modules requires converting these drivers to platform drivers. Add platform device for Falcon IDE interface in Atari platform setup code. Use this in the pata_falcon driver in place of the simple platform device set up on the fly. Convert falconide driver to use the same platform device that is used by pata_falcon also. (With the introduction of a platform device for the Atari Falcon IDE interface, the old Falcon IDE driver no longer loads (resource already claimed by the platform device)). Tested (as built-in driver) on my Atari Falcon. Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://lore.kernel.org/r/1573008449-8226-1-git-send-email-schmitzmic@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-08-19m68k: atari: Rename shifter to shifter_st to avoid conflictGeert Uytterhoeven
When test-compiling the BCM2835 pin control driver on m68k: In file included from arch/m68k/include/asm/io_mm.h:32:0, from arch/m68k/include/asm/io.h:8, from include/linux/io.h:13, from include/linux/irq.h:20, from include/linux/gpio/driver.h:7, from drivers/pinctrl/bcm/pinctrl-bcm2835.c:17: drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function 'bcm2711_pull_config_set': arch/m68k/include/asm/atarihw.h:190:22: error: expected identifier or '(' before 'volatile' # define shifter ((*(volatile struct SHIFTER *)SHF_BAS)) "shifter" is a too generic name for a global definition. As the corresponding definition for Atari TT is already called "shifter_tt", fix this by renaming the definition for Atari ST to "shifter_st". Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-25m68k: atari: Convert to clocksource APIFinn Thain
Add a platform clocksource by adapting the existing arch_gettimeoffset implementation. Normally the MFP timer C interrupt flag would be used to check for timer counter wrap-around. Unfortunately, that flag gets cleared by the MFP itself (due to automatic End-of-Interrupt mode). This means that mfp_timer_c_handler() and atari_read_clk() must race when accounting for counter wrap-around. That problem is avoided by effectively stopping the clock when it might otherwise jump backwards (due to interrupt latency). Note that this may affect clock accuracy. After the timer interrupt is asserted, wait for the counter to be reloaded so that atari_read_clk() will not see the intermediate state as that would cause the clock to jump backwards. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-03-25m68k: Drop ARCH_USES_GETTIMEOFFSETFinn Thain
The functions that implement arch_gettimeoffset are re-used by new clocksource drivers in subsequent patches. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-03-25m68k: Call timer_interrupt() with interrupts disabledFinn Thain
Some platforms execute their timer handler with the interrupt priority level set below 6. That means the handler could be interrupted by another driver and this could lead to re-entry of the timer core. Avoid this by use of local_irq_save/restore for timer interrupt dispatch. This provides mutual exclusion around the timer interrupt flag access which is needed later in this series for the clocksource conversion. Reported-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1811131407120.2697@nanos.tec.linutronix.de Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06Merge tag 'char-misc-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...
2019-01-22m68k: Dispatch nvram_ops calls to Atari or Mac functionsFinn Thain
A multi-platform kernel binary has to decide at run-time how to dispatch the arch_nvram_ops calls. Add a platform-independent arch_nvram_ops struct for this, to replace the atari-specific one. Enable CONFIG_HAVE_ARCH_NVRAM_OPS for Macs. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22m68k/atari: Implement arch_nvram_ops methods and enable ↵Finn Thain
CONFIG_HAVE_ARCH_NVRAM_OPS Atari RTC NVRAM uses a checksum so implement the remaining arch_nvram_ops methods for the set_checksum and initialize ioctls. Enable CONFIG_HAVE_ARCH_NVRAM_OPS. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22m68k/atari: Implement arch_nvram_ops structFinn Thain
By implementing an arch_nvram_ops struct, a platform can re-use the drivers/char/nvram.c module without needing any arch-specific code in that module. Atari does so here. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22nvram: Replace nvram_* function exports with static functionsFinn Thain
Replace nvram_* functions with static functions in nvram.h. These will become wrappers for struct nvram_ops method calls. This patch effectively disables existing NVRAM functionality so as to allow the rest of the series to be bisected without build failures. That functionality is gradually re-implemented in subsequent patches. Replace the sole validate-checksum-and-read-byte sequence with a call to nvram_read() which will gain the same semantics in subsequent patches. Remove unused exports. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22m68k/atari: Move Atari-specific code out of drivers/char/nvram.cFinn Thain
Move the m68k-specific code out of the driver to make the driver generic. I've used 'SPDX-License-Identifier: GPL-2.0+' for the new file because the old file is covered by MODULE_LICENSE("GPL"). Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-21m68k/atari: Avoid VLA use in atari_switches_setup()Geert Uytterhoeven
With gcc 7.3.0: arch/m68k/atari/config.c: In function ‘atari_switches_setup’: arch/m68k/atari/config.c:151:2: warning: ISO C90 forbids variable length array ‘switches’ [-Wvla] char switches[strlen(str) + 1]; ^~~~ Replace the variable size by the maximum kernel command line size (256 bytes), which is an upper limit for all suboptions. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: replace alloc_bootmem_low_pages with memblock_alloc_lowMike Rapoport
The alloc_bootmem_low_pages() function allocates PAGE_SIZE aligned regions from low memory. memblock_alloc_low() with alignment set to PAGE_SIZE does exactly the same thing. The conversion is done using the following semantic patch: @@ expression e; @@ - alloc_bootmem_low_pages(e) + memblock_alloc_low(e, PAGE_SIZE) Link: http://lkml.kernel.org/r/1536927045-23536-19-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-29m68k: Remove unused set_clock_mmss() helpersArnd Bergmann
Commit 397ac99c6cef ("m68k: remove dead timer code") removed set_rtc_mmss() because it was unused in 2012. However, this was itself the only user of the mach_set_clock_mmss() callback and the many implementations of that callback, which are equally unused. This removes all of those as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-02-12m68k/atari: Modernize printing of kernel messagesGeert Uytterhoeven
- Convert from printk() to pr_*(), - Add missing continuations, to fix user-visible breakage, - Drop useless WARNING prefix, - Move trailing spaces to start of continuations. Note that the "Keyboard overrun" message will now only be generated when the kernel has been compiled for debugging. Fixes: 4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation lines") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-12-09m68k/atari: Use seq_puts() in atari_get_hardware_list()Markus Elfring
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-09-19m68k: Use IS_ENABLED() instead of checking for built-in or moduleGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-01-10m68k/atari, m68k/sun3: Fix SCSI platform device registration when driver is ↵Finn Thain
modular Fixes: 3ff228af84b5 ("atari_scsi: Convert to platform device") Fixes: 0d31f8759109 ("sun3_scsi: Convert to platform device") Reported-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2015-01-15m68k/atari: Remove obsolete IRQ_TYPE_*Geert Uytterhoeven
IRQ_TYPE_SLOW, IRQ_TYPE_FAST, and IRQ_TYPE_PRIO are no longer used by the Atari platform interrupt code since commit 734085651c9b80aa ("[PATCH] m68k: convert atari irq code") in v2.6.18-rc1, so drop them. Note that their values have been reused for different purposes (IRQ_TYPE_NONE, IRQ_TYPE_EDGE_RISING, and IRQ_TYPE_EDGE_FALLING) since commit 6a6de9ef5850d063 ("[PATCH] genirq: core") in v2.6.18-rc1. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2015-01-13m68k/atari: Remove obsolete keyboard_tasklet schedulingGeert Uytterhoeven
If CONFIG_VT=n: arch/m68k/atari/built-in.o: In function `atari_keyboard_interrupt': atakeyb.c:(.text+0x1846): undefined reference to `keyboard_tasklet' atakeyb.c:(.text+0x1852): undefined reference to `keyboard_tasklet' I think the keyboard_tasklet scheduling is no longer needed, as I believe it's handled by drivers/tty/vt/keyboard.c based on events received from the input subsystem. So just remove it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Michael Schmitz <schmitz@debian.org>
2015-01-11m68k/atari: atakeyb.c - Remove some unused functionsRickard Strandqvist
Remove some functions that are not used anywhere: atari_kbd_leds() ikbd_exec() ikbd_mem_read() ikbd_mem_write() ikbd_clock_get() ikbd_clock_set() ikbd_pause() ikbd_resume() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-11-20atari_scsi: Convert to platform deviceFinn Thain
Convert atari_scsi to platform device and eliminate scsi_register(). Validate __setup options later on so that module options are checked as well. Remove the comment about the scsi mid-layer disabling the host irq as it is no longer true (AFAICT). Also remove the obsolete slow interrupt stuff (IRQ_TYPE_SLOW == 0 anyway). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20atari_scsi: Fix atari_scsi deadlocks on FalconFinn Thain
Don't disable irqs when waiting for the ST DMA "lock"; its release may require an interrupt. Introduce stdma_try_lock() for use in soft irq context. atari_scsi now tells the SCSI mid-layer to defer queueing a command if the ST DMA lock is not available, as per Michael's patch: http://marc.info/?l=linux-m68k&m=139095335824863&w=2 The falcon_got_lock variable is race prone: we can't disable IRQs while waiting to acquire the lock, so after acquiring it there must be some interval during which falcon_got_lock remains false. Introduce stdma_is_locked_by() to replace falcon_got_lock. The falcon_got_lock tests in the EH handlers are incorrect these days. It can happen that an EH handler is called after a command completes normally. Remove these checks along with falcon_got_lock. Also remove the complicated and racy fairness wait queues. If fairness is an issue (when SCSI competes with IDE for the ST DMA interrupt), the solution is likely to be a lower value for host->can_queue. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-14m68k/atari - stram: Add missing #include <linux/ioport.h>Geert Uytterhoeven
If CONFIG_BLOCK=n: arch/m68k/atari/stram.c:44: error: variable ‘stram_pool’ has initializer but incomplete type arch/m68k/atari/stram.c:45: error: unknown field ‘name’ specified in initializer arch/m68k/atari/stram.c:46: warning: excess elements in struct initializer arch/m68k/atari/stram.c:46: warning: (near initialization for ‘stram_pool’) arch/m68k/atari/stram.c: In function ‘atari_stram_reserve_pages’: arch/m68k/atari/stram.c:97: error: invalid use of undefined type ‘struct resource’ ... Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-05-26m68k/atari - stram: alloc ST-RAM pool even if kernel not in ST-RAMMichael Schmitz
With the kernel loaded to FastRAM (TT-RAM), none of the ST-RAM address range is mapped by init_mem, and ST-RAM is not accessible through the normal allocation pathways as a result. Implement ST-RAM pool allocation to be based on physical addresses always (it already was when the kernel was loaded in ST-RAM). Return kernel virtual addresses as per normal. The current test for the kernel residing in ST-RAM always returns true. Use the bootinfo memory chunk order instead - with the kernel in FastRAM, ST-RAM (phys. 0x0) is not the first chunk. In case the kernel is running from FastRAM, delay mapping of ST-RAM pool until after mem_init. Provide helper functions for those users of ST-RAM that need to be aware of the backing physical addresses. Kudos to Geert for his hints on getting this started. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-03-20m68k: atari: Fix the last kernel_stat.h falloutThomas Gleixner
Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-01-13m68k/irq - Use polled IRQ flag for MFP timer cascaded interruptsMichael Schmitz
Some Atari hardware has no capacity to raise interrupts (e.g. network or USB adapter hardware attached via ROM port). The driver interrupt routine is called from a timer interrupt (timer D) in these cases, using chained device specific pseudo interrupts (IRQ_MFP_TIMER1 ff.) These interrupts will more often than not, return IRQ_NONE as there is not always work for the device handler when called. Too many unhandled interrupts will result in the interrupt being disabled by the stuck interrupt watchdog. As preferred option to flag interrupts as needing exclusion from the watchdog mechanism, tglx added the IRQ_IS_POLLED flag for use in such a case. Currently, two interrupts need to use this flag. Add more users as needed. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-12-08m68k/amiga,atari: Fix specifying multiple debug= parametersGeert Uytterhoeven
Since commit d6713b4091a99fa2af2fabdcd2f3fb97f32ecf2e ("m68k: early parameter support"), the user can specify multiple debug consoles using the "debug=" kernel command line parameter. However, as there's only a single struct console object, which is reused, it would actually register the same console object multiple times, causing the following warning: WARNING: CPU: 0 PID: 0 at kernel/printk/printk.c:2233 register_console+0x36/ console 'debug0' already registered Make sure to register the console object only once, to avoid the warning. Note that still only one console (the one corresponding to the last "debug=" parameter) will be active at the same time, as the .write() method of the already registered console object is overwritten by a subsequent "debug=" parameter. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k/UAPI: Use proper types (endianness/size) in <asm/bootinfo*.h>Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k/UAPI: Disintegrate arch/m68k/include/asm/bootinfo.hGeert Uytterhoeven
Export the bootinfo definitions that are used by bootstrap loaders, and split them up in generic and platform-specific parts. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: USB - add platform devices for EtherNAT/NetUSBee ISP1160 HCDMichael Schmitz
Add platform devices used by the isp116x-hcd driver for EtherNAT and NetUSBee. Note that the NetUSBee also contains a RTL8019 Ethernet chip, so its platform device is used to cover the EtherNEC case, too. Register definitions thanks to David Galvez <dgalvez75@gmail.com> [Geert] Conditionalize isp1160_delay() definition Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNAT - add interrupt chip definition for CPLD interruptsMichael Schmitz
Add a dedicated interrupt chip definition for the EtherNAT CPLD interrupts. SMC91C111 and ISP1160 chips have separate interrupts that can be enabled and disabled in a CPLD register at offset 0x23 from the card base. Note the CPLD interrupt control register is mapped on demand, whenever any interrupt enable/disable action is requested. The EtherNAT USB driver still needs interrupts disabled around reset and start actions. In particular, we cannot entirely rely on the irq_startup being called first. The smc91x and isp116x-hcd drivers will use this feature. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNEC - add platform device supportMichael Schmitz
Add platform device for the Atari ROM port ethernet adapter, EtherNEC. This platform device will be used by the ne.c driver. [Geert] Conditionalize platform device data structures Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNAT - platform device and IRQ support codeMichael Schmitz
Add platform device and interrupt definitions necessary for the EtherNAT Ethernet/USB adapter for the Falcon extension port. EtherNAT interrupt numbers are 139/140 so the max. interrupt number for Atari has to be increased. [Geert] Conditionalize platform device data structures Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: use dedicated irq_chip for timer D interruptsMichael Schmitz
Add a special irq_chip for the Atari MFP timer D interrupt, which is used as a polling timer for EtherNEC and NetUSBee Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-12-24m68k: set arch_gettimeoffset directlyStephen Warren
remove m68k's mach_gettimeoffset function pointer, and instead directly set the arch_gettimeoffset function pointer. This requires multiplying all function results by 1000, since the removed m68k_gettimeoffset() did this. Also, s/unsigned long/u32/ just to make the function prototypes exactly match that of arch_gettimeoffset. Cc: Joshua Thompson <funaho@jurai.org> Cc: Sam Creasey <sammy@sammy.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Phil Blundell <philb@gnu.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-22m68k/atari: Change VME irq numbers from unsigned long to unsigned intGeert Uytterhoeven
Device interrupts numbers were changed to unsigned int in 1997, the year IRQ_MACHSPEC was killed as well. Also kill a related cast while we're at it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: netdev@vger.kernel.org
2012-03-28Disintegrate asm/system.h for M68KDavid Howells
Disintegrate asm/system.h for M68K. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org> cc: linux-m68k@lists.linux-m68k.org