summaryrefslogtreecommitdiff
path: root/arch/m68k
AgeCommit message (Collapse)Author
2012-04-17m68knommu: make sure 2nd FEC eth interface pins are enabled on 5275 ColdFireGreg Ungerer
The CONFIG_FEC2 define was removed from the kernel many versions ago. But it is still being used to set the multi-function pins when compiling for a ColdFire 527[45] SoC that has 2 ethernet interfaces. Remove the last remaining uses of this define, and so fix the setting of the pins for the 2nd ethernet interface. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-17m68knommu: fix id number for second eth device on 5275 ColdFireGreg Ungerer
The second ColdFire FEC ethernet device should have an id number of 1, not 0. Otherwise it clashes with the first FEC ethernet device. On booting a kernel on a 5275 based board you will get messages out of the kernel like this: <4>------------[ cut here ]------------ <4>WARNING: at fs/sysfs/dir.c:508 0x0a8b50() <4>sysfs: cannot create duplicate filename 'fec.0' And likely you won't be able to completely boot up after this at all. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-16m68knommu: move and fix the 68VZ328 platform bootlogo.hGreg Ungerer
The 68EZ328/bootlogo.h is not actually used in the 68EZ328 platform code at all. It is used by the 68VZ328 platform code though, so move it to be with the rest of the 68VZ328 platform code. Commit c0e0c89c089f4bd66dbbd1a44da90abe74fe3f02 ("fix broken boot logo inclusion") modified the bootlogo code to not be included in asm code. Modify 68VZ328/bootlogo.h so that the bootlogo bit map is named correctly for direct use in the C code. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-16m68knommu: remove the unused bootlogo.h processing for 68EZ328 and 68VZ328Greg Ungerer
The 68EZ328 and 68VZ328 platforms currently try to process their bootlogo.h to make it clean to include in asm files. This is no longer used, the bootlogo.h file is now included only in C code, so remove all the processing code in the 68EZ328 and 68VZ328 Makefiles. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-01m68k/q40: Add missing platform check before registering platform devicesGeert Uytterhoeven
On multi-platform kernels, the Q40/Q60 platform devices should be registered when running on Q40/Q60 only. Else it may crash later. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-01m68k/mac: Add missing platform check before registering platform devicesGeert Uytterhoeven
On multi-platform kernels, the Mac platform devices should be registered when running on Mac only. Else it may crash later. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org
2012-04-01m68k: include asm/cmpxchg.h in our m68k atomic.hGreg Ungerer
After commit 9ffc93f203c18a70623f21950f1dd473c9ec48cd ("Remove all CC init/main.o In file included from include/linux/mm.h:15:0, from include/linux/ring_buffer.h:5, from include/linux/ftrace_event.h:4, from include/trace/syscall.h:6, from include/linux/syscalls.h:78, from init/main.c:16: include/linux/debug_locks.h: In function ‘__debug_locks_off’: include/linux/debug_locks.h:16:2: error: implicit declaration of function ‘xchg’ There is no indirect inclusions of the new asm/cmpxchg.h for m68k here. Looking at most other architectures they include asm/cmpxchg.h in their asm/atomic.h. M68k currently does not do this. Including this in atomic.h fixes all m68k build problems. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-03-29Merge branch 'x86-x32-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x32 support for x86-64 from Ingo Molnar: "This tree introduces the X32 binary format and execution mode for x86: 32-bit data space binaries using 64-bit instructions and 64-bit kernel syscalls. This allows applications whose working set fits into a 32 bits address space to make use of 64-bit instructions while using a 32-bit address space with shorter pointers, more compressed data structures, etc." Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c} * 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) x32: Fix alignment fail in struct compat_siginfo x32: Fix stupid ia32/x32 inversion in the siginfo format x32: Add ptrace for x32 x32: Switch to a 64-bit clock_t x32: Provide separate is_ia32_task() and is_x32_task() predicates x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls x86/x32: Fix the binutils auto-detect x32: Warn and disable rather than error if binutils too old x32: Only clear TIF_X32 flag once x32: Make sure TS_COMPAT is cleared for x32 tasks fs: Remove missed ->fds_bits from cessation use of fd_set structs internally fs: Fix close_on_exec pointer in alloc_fdtable x32: Drop non-__vdso weak symbols from the x32 VDSO x32: Fix coding style violations in the x32 VDSO code x32: Add x32 VDSO support x32: Allow x32 to be configured x32: If configured, add x32 system calls to system call tables x32: Handle process creation x32: Signal-related system calls x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h> ...
2012-03-28Delete all instances of asm/system.hDavid Howells
Delete all instances of asm/system.h as they should be redundant by this point. Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28Disintegrate asm/system.h for M68KDavid Howells
Disintegrate asm/system.h for M68K. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org> cc: linux-m68k@lists.linux-m68k.org
2012-03-28m68k: Fix xchg/cmpxchg to fail to link if given an inappropriate pointerDavid Howells
Fix the m68k versions of xchg() and cmpxchg() to fail to link if given an inappropriately sized pointer rather than BUG()'ing at runtime. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org> cc: linux-m68k@lists.linux-m68k.org
2012-03-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "- we finally merged driver for USB version of Synaptics touchpads (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo); - a bunch of new drivers for embedded platforms (Cypress touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x touchscreens, TI touchscreen); - input core allows clients to specify desired clock source for timestamps on input events (EVIOCSCLOCKID ioctl); - input core allows querying state of all MT slots for given event code via EVIOCGMTSLOTS ioctl; - various driver fixes and improvements." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: ili210x - add support for Ilitek ILI210x based touchscreens Input: altera_ps2 - use of_match_ptr() Input: synaptics_usb - switch to module_usb_driver() Input: convert I2C drivers to use module_i2c_driver() Input: convert SPI drivers to use module_spi_driver() Input: omap4-keypad - move platform_data to <linux/platform_data> Input: kxtj9 - who_am_i check value and initial data rate fixes Input: add driver support for MAX8997-haptic Input: tegra-kbc - revise device tree support Input: of_keymap - add device tree bindings for simple key matrices Input: wacom - fix physical size calculation for 3rd-gen Bamboo Input: twl4030-vibra - really switch from #if to #ifdef Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible Input: max8925_onkey - avoid accessing input device too early Input: max8925_onkey - allow to be used as a wakeup source Input: atmel-wm97xx - convert to dev_pm_ops Input: atmel-wm97xx - set driver owner Input: add cyttsp touchscreen maintainer entry Input: cyttsp - remove useless checks in cyttsp_probe() Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037 ...
2012-03-21Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu arch updates from Greg Ungerer: "Includes a cleanup of the non-MMU linker script (it now almost exclusively uses the well defined linker script support macros and definitions). Some more merging of MMU and non-MMU common files (specifically the arch process.c, ptrace and time.c). And a big cleanup of the massively duplicated ColdFire device definition code. Overall we remove about 2000 lines of code, and end up with a single set of platform device definitions for the serial ports, ethernet ports and QSPI ports common in most ColdFire SoCs. I expect you will get a merge conflict on arch/m68k/kernel/process.c, in cpu_idle(). It should be relatively strait forward to fixup." And cpu_idle() conflict resolution was indeed trivial (merging the nommu/mmu versions of process.c trivially conflicting with the conversion to use the schedule_preempt_disabled() helper function) * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (57 commits) m68knommu: factor more common ColdFire cpu reset code m68knommu: make 528x CPU reset register addressing consistent m68knommu: make 527x CPU reset register addressing consistent m68knommu: make 523x CPU reset register addressing consistent m68knommu: factor some common ColdFire cpu reset code m68knommu: move old ColdFire timers init from CPU init to timers code m68knommu: clean up init code in ColdFire 532x startup m68knommu: clean up init code in ColdFire 528x startup m68knommu: clean up init code in ColdFire 523x startup m68knommu: merge common ColdFire QSPI platform setup code m68knommu: make 532x QSPI platform addressing consistent m68knommu: make 528x QSPI platform addressing consistent m68knommu: make 527x QSPI platform addressing consistent m68knommu: make 5249 QSPI platform addressing consistent m68knommu: make 523x QSPI platform addressing consistent m68knommu: make 520x QSPI platform addressing consistent m68knommu: merge common ColdFire FEC platform setup code m68knommu: make 532x FEC platform addressing consistent m68knommu: make 528x FEC platform addressing consistent m68knommu: make 527x FEC platform addressing consistent ...
2012-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-20Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds
Pull TTY/serial patches from Greg KH: "tty and serial merge for 3.4-rc1 Here's the big serial and tty merge for the 3.4-rc1 tree. There's loads of fixes and reworks in here from Jiri for the tty layer, and a number of patches from Alan to help try to wrestle the vt layer into a sane model. Other than that, lots of driver updates and fixes, and other minor stuff, all detailed in the shortlog." * tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits) serial: pxa: add clk_prepare/clk_unprepare calls TTY: Wrong unicode value copied in con_set_unimap() serial: PL011: clear pending interrupts serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset. vt: NULL dereference in vt_do_kdsk_ioctl() tty: serial: vt8500: fix annotations for probe/remove serial: remove back and forth conversions in serial_out_sync serial: use serial_port_in/out vs serial_in/out in 8250 serial: introduce generic port in/out helpers serial: reduce number of indirections in 8250 code serial: delete useless void casts in 8250.c serial: make 8250's serial_in shareable to other drivers. serial: delete last unused traces of pausing I/O in 8250 pch_uart: Add module parameter descriptions pch_uart: Use existing default_baud in setup_console pch_uart: Add user_uartclk parameter pch_uart: Add Fish River Island II uart clock quirks pch_uart: Use uartclk instead of base_baud mpc5200b/uart: select more tolerant uart prescaler on low baudrates tty: moxa: fix bit test in moxa_start() ...
2012-03-09Merge commit 'v3.3-rc6' into nextDmitry Torokhov
2012-03-08TTY: remove re-assignments to tty_driver membersJiri Slaby
All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-05m68knommu: factor more common ColdFire cpu reset codeGreg Ungerer
Most of the more modern ColdFire cores use the same code to reset the CPU (but it is different to most of the earlier cores). Currently that is duplicated in each of the sub-arch files. Pull out this common code and out a single copy of it with the other common reset code. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 528x CPU reset register addressing consistentGreg Ungerer
If we make all MCF_RCR (CPU reset register) addressing consistent across all ColdFire CPU family members that use it then we will be able to remove the duplicated copies of the code that use it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 527x CPU reset register addressing consistentGreg Ungerer
If we make all MCF_RCR (CPU reset register) addressing consistent across all ColdFire CPU family members that use it then we will be able to remove the duplicated copies of the code that use it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 523x CPU reset register addressing consistentGreg Ungerer
If we make all MCF_RCR (CPU reset register) addressing consistent across all ColdFire CPU family members that use it then we will be able to remove the duplicated copies of the code that use it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: factor some common ColdFire cpu reset codeGreg Ungerer
A number of the early ColdFire cores use the same code to reset the CPU. Currently that is duplicated in each of the sub-arch files. Pull out this common code and use a single copy of it for all CPU types that use it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: move old ColdFire timers init from CPU init to timers codeGreg Ungerer
The original ColdFire timer interrupt setup is used by most of the users of the original ColdFire timer code. But the code is currently duplicated in each of the ColdFire CPU specific init files. Move it to the timers code that it is really part of. It is strait forward to make it conditional on also having the original interrupt engine that it needs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: clean up init code in ColdFire 532x startupGreg Ungerer
We can move all the init calls in the initcall code into the more general arch setup code (which is config_BSP() here). That makes the 532x consistent with other ColdFire CPUs setup code. It means we can get rid of the initcall setup here all together. Also make sure we set the arch mach_reset function pointer to get the local arch reset code called on reset. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: clean up init code in ColdFire 528x startupGreg Ungerer
We can move all the init calls in the initcall code into the more general arch setup code (which is config_BSP() here). That makes the 528x consistent with other ColdFire CPUs setup cod. It means we can get rif of the initcall setup here all together. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: clean up init code in ColdFire 523x startupGreg Ungerer
We can move the QSPI init call to the more general config_BSP() code on the 523x platorm setup code. Then we can remove the initcall code all together. We can also remove the un-needed include of mcfuart.h while we are cleaning up here too. Also I noticed that we are not calling the fec_init() code here, and we should be doing that. Put that back in too. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: merge common ColdFire QSPI platform setup codeGreg Ungerer
The ColdFire QSPI is common to quite a few ColdFire CPUs. No need to duplicate its platform setup code for every CPU family member that has it. Merge all the setup code into a single shared file. This also results in few platforms no longer needing any local platform setup code. In those cases remove the empty devices array and initcall code as well. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 532x QSPI platform addressing consistentGreg Ungerer
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and code and use a single setup for all. So modify the ColdFire 532x QSPI addressing so that: . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used . move chip select definitions (CS) to appropriate header Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 528x QSPI platform addressing consistentGreg Ungerer
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and code and use a single setup for all. So modify the ColdFire 528x QSPI addressing so that: . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used . move chip select definitions (CS) to appropriate header Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 527x QSPI platform addressing consistentGreg Ungerer
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and code and use a single setup for all. So modify the ColdFire 527x QSPI addressing so that: . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used . move chip select definitions (CS) to appropriate header Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 5249 QSPI platform addressing consistentGreg Ungerer
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and code and use a single setup for all. So modify the ColdFire 5249 QSPI addressing so that: . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used . move chip select definitions (CS) to appropriate header Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 523x QSPI platform addressing consistentGreg Ungerer
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and code and use a single setup for all. So modify the ColdFire 523x QSPI addressing so that: . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used . move chip select definitions (CS) to appropriate header Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 520x QSPI platform addressing consistentGreg Ungerer
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and code and use a single setup for all. So modify the ColdFire 520x QSPI addressing so that: . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used . move chip select definitions (CS) to appropriate header Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: merge common ColdFire FEC platform setup codeGreg Ungerer
The ColdFire FEC is common to quite a few ColdFire CPUs. No need to duplicate its platform setup code for every CPU family member that has it. Merge all the setup code into a single shared file. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 532x FEC platform addressing consistentGreg Ungerer
If we make all FEC (ethernet) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 532x FEC addressing so that: . FECs are numbered from 0 up . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 528x FEC platform addressing consistentGreg Ungerer
If we make all FEC (ethernet) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 528x FEC addressing so that: . FECs are numbered from 0 up . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 527x FEC platform addressing consistentGreg Ungerer
If we make all FEC (ethernet) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 527x FEC addressing so that: . FECs are numbered from 0 up . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 5272 FEC platform addressing consistentGreg Ungerer
If we make all FEC (ethernet) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 5272 FEC addressing so that: . FECs are numbered from 0 up . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 523x FEC platform addressing consistentGreg Ungerer
If we make all FEC (ethernet) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 523x FEC addressing so that: . FECs are numbered from 0 up . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: make 520x FEC platform addressing consistentGreg Ungerer
If we make all FEC (ethernet) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 520x FEC addressing so that: . FECs are numbered from 0 up . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: merge common ColdFire UART IRQ setupGreg Ungerer
Some ColdFire CPU UART hardware modules can configure the IRQ they use. Currently the same setup code is duplicated in the init code for each of these ColdFire CPUs. Merge all this code to a single instance. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: merge common ColdFire UART platform setup codeGreg Ungerer
The ColdFire UART is common to all ColdFire CPU's. No need to duplicate its platform setup code for every CPU family member. Merge all the setup code into a single shared file. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: simplify the 54xx UART setup codeGreg Ungerer
Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: simplify the 5407 UART setup codeGreg Ungerer
Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: simplify the 532x UART setup codeGreg Ungerer
Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: simplify the 5307 UART setup codeGreg Ungerer
Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: simplify the 528x UART setup codeGreg Ungerer
Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: simplify the 527x UART setup codeGreg Ungerer
Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: simplify the 5272 UART setup codeGreg Ungerer
Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05m68knommu: simplify the 5249 UART setup codeGreg Ungerer
Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>