summaryrefslogtreecommitdiff
path: root/arch/microblaze/boot
AgeCommit message (Collapse)Author
2019-09-19microblaze: Switch to standard restart handlerLinus Walleij
The microblaze uses the legacy APIs to dig out a GPIO pin defined in the root of the device tree to issue a hard reset of the platform. Asserting a hard reset should be done using the standard DT-enabled and fully GPIO descriptor aware driver in drivers/power/reset/gpio-restart.c using the bindings from Documentation/devicetree/bindings/power/reset/gpio-restart.txt To achieve this, first make sure microblaze makes use of the standard kernel restart path utilizing do_kernel_restart() from <linux/reboot.h>. Put in some grace time and an emergency print if the restart does not properly assert. As this is basic platform functionality we patch the DTS file and defconfig in one go for a lockstep change. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [ Michal: Move machine_restart back to reset.c ] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-14microblaze: remove the explicit removal of system.dtbMasahiro Yamada
I guess || (rm -f $@ && echo false) ... should be || (rm -f $@ && false) In fact, no Makefile needs to delete a target explicitly on error. It is automatically done since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"). I also reused equivalent cmd_shipped from scripts/Makefile.lib. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-14microblaze: fix multiple bugs in arch/microblaze/boot/MakefileMasahiro Yamada
This commit fixes some build issues. The first issue is the breakage of linux.bin.ub target since commit ece97f3a5fb5 ("microblaze: Fix simpleImage format generation") because the addition of UIMAGE_{IN,OUT} affected it. make ARCH=microblaze CROSS_COMPILE=microblaze-linux- linux.bin.ub [ snip ] OBJCOPY arch/microblaze/boot/linux.bin UIMAGE arch/microblaze/boot/linux.bin.ub.ub /usr/bin/mkimage: Can't open arch/microblaze/boot/linux.bin.ub: No such file or directory make[1]: *** [arch/microblaze/boot/Makefile;14: arch/microblaze/boot/linux.bin.ub] Error 1 make: *** [arch/microblaze/Makefile;83: linux.bin.ub] Error 2 The second issue is the use of the "if_changed" multiple times for the same target. As commit 92a4728608a8 ("x86/boot: Fix if_changed build flip/flop bug") pointed out, this never works properly. Moreover, generating multiple images as a side-effect is confusing. Let's split the build recipe for each image. simpleImage.<dt>*.unstrip is just a copy of vmlinux. simpleImage.<dt> and simpleImage.<dt>.ub are created in the same way as linux.bin and linux.bin.ub, respectively. I kept simpleImage.* recipes independent of linux.bin.* ones to not change the behavior. Lastly, this commit fixes "make ARCH=microblaze clean". Previously, it only cleaned up the unstrip image. Now, all the simpleImage files are cleaned. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-14microblaze: move "... is ready" messages to arch/microblaze/MakefileMasahiro Yamada
To prepare for more fixes, move this to arch/microblaze/Makefile. Otherwise, the same "... is ready" would be printed multiple times. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-02microblaze: enable building all dtbsRob Herring
Enable the 'dtbs' target for microblaze. As microblaze only has one dts file, always enable it. Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-02kbuild: consolidate Devicetree dtb build rulesRob Herring
There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Paul Burton <paul.burton@mips.com> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-23microblaze: dts: replace 'linux,stdout-path' with 'stdout-path'Rob Herring
'linux,stdout-path' has been deprecated for some time in favor of 'stdout-path'. Now dtc will warn on occurrences of 'linux,stdout-path'. Search and replace the one occurrence with 'stdout-path'. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michal Simek <monstr@monstr.eu> Cc: devicetree@vger.kernel.org Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23microblaze: Fix simpleImage format generationMichal Simek
simpleImage generation was broken for some time. This patch is fixing steps how simpleImage.*.ub file is generated. Steps are objdump of vmlinux and create .ub. Also make sure that there is striped elf version with .strip suffix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignoreMasahiro Yamada
Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-10microblaze: Remove *.dtb files in make cleanMichal Simek
dts/Makefile is called only for simpleImage target which is causing that *.dtb are not removed. This patch fix it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07microblaze: Move DTS file to common location at boot/dts folderMichal Simek
Preparation step for arch/microblaze/platform/ cleanup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-11-08microblaze: Remove incorrect file pathMichal Simek
Trivial. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-09-03microblaze: Add linux.bin.ub targetJason Wu
Currently the linux.bin target creates both linux.bin and linux.bin.ub. Add linux.bin.ub as separate target to generate linux.bin.ub. Signed-off-by: Jason Wu <huanyu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-12microblaze: Add .gitignore entries for auto-generated filesLars-Peter Clausen
Add .gitignore entries for files which are generated during the build process. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2012-12-03microblaze: use new common dtc ruleStephen Warren
The current rules have the .dtb files build in a different directory from the .dts files. This patch changes microblaze to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. This requires moving parts of arch/microblaze/boot/Makefile into newly created arch/microblaze/boot/dts/Makefile, and updating arch/microblaze/Makefile to call the new Makefile. linked_dtb.S is also moved into boot/dts/ since it's used by rules that were moved. Cc: Michal Simek <monstr@monstr.eu> Cc: microblaze-uclinux@itee.uq.edu.au Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-03-30Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - Unification of cmd_uimage among archs that use it - make headers_check tries harder before reporting a missing <linux/types.h> include - kbuild portability fix for shells that do not support echo -e - make clean descends into samples/ - setlocalversion grep fix - modpost typo fix - dtc warnings fix * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: setlocalversion: Use "grep -q" instead of piping output to "read dummy" modpost: fix ALL_INIT_DATA_SECTIONS Kbuild: centralize MKIMAGE and cmd_uimage definitions headers_check: recursively search for linux/types.h inclusion scripts/Kbuild.include: Fix portability problem of "echo -e" scripts: dtc: fix compile warnings kbuild: clean up samples directory kbuild: disable -Wmissing-field-initializers for W=1
2012-03-26Kbuild: centralize MKIMAGE and cmd_uimage definitionsStephen Warren
All ARCHs have the same definition of MKIMAGE. Move it to Makefile.lib to avoid duplication. All ARCHs have similar definitions of cmd_uimage. Place a sufficiently parameterized version in Makefile.lib to avoid duplication. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Mike Frysinger <vapier@gentoo.org> [Blackfin] Tested-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32] Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-03-19microblaze: Fix makefile to work with latest toolchainMichal Simek
When building with latest binutils, vmlinux includes some sections which need to be stripped out when building the binary image. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-01-15Kbuild: Use dtc's -d (dependency) optionStephen Warren
This hooks dtc into Kbuild's dependency system. Thus, for example, "make dtbs" will rebuild tegra-harmony.dtb if only tegra20.dtsi has changed yet tegra-harmony.dts has not. The previous lack of this feature recently caused me to have very confusing "git bisect" results. For ARM, it's obvious what to add to $(targets). I'm not familiar enough with other architectures to know what to add there. Powerpc appears to already add various .dtb files into $(targets), but the other archs may need something added to $(targets) to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> [mmarek: Dropped arch/c6x part to avoid merging commits from the middle of the merge window] Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-23microblaze/of: Use generic rule to build dtb'sDirk Brandewie
Modify arch/powerpc/boot/Makefile to use dtc command in scripts/Makefile.lib Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-04microblaze: Do not use _start in vmlinuxMichal Simek
_start symbol stores physical address where kernel is. Gdb uses this symbol for their purpose that's why we have to rename it. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04microblaze: Cleanup boot/MakefileMichal Simek
Remove spaces and use tabs instead. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: Makefile cleanupsArun Bhanu
If CONFIG_INITRAMFS_SOURCE is set, "scripts/gen_initramfs_list.sh" checks if the cpio image exists. Remove the duplicate check from the Makefile. Remove the "clean-kernel" variable which is unused in the Makefile and is not used by the Kbuild. Signed-off-by: Arun Bhanu <arun@bhanu.net> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: Fix Makefile to delete build generated filesArun Bhanu
'make clean' does not to delete the following build generated file: arch/microblaze/boot/linux.bin.ub 'make mrproper' does not to delete the following build generated files: arch/microblaze/boot/simpleImage.* Fix the Makefile to delete these build generated files. See [1] for a discussion on why simpleImage.* files are deleted with 'make mrproper' and not with 'make clean'. [1] http://lkml.org/lkml/2010/3/12/96 Signed-off-by: Arun Bhanu <arun@bhanu.net> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: support U-BOOT image formatMichal Simek
Two version are generated. linux.bin.ub which is created from linux.bin file and simpleImage.<dts>.ub which is created from stripped simpleImage.<dts> file Load address and entry point is for microblaze first instruction which is CONFIG_KERNEL_BASE_ADDR variable. There is possible for simpleImage format parse _start symbol too. simpleImage.<dts> is still stripped elf file I cleared simpleImage.<dts>.unstrip file because there are so big. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-24microblaze: Support simpleImage.dts make targetMichal Simek
Instead of remembering to specify DTB= on the make commandline, this commit allows the much friendlier make simpleImage.<dts> where <dts>.dts is expected to be found in arch/microblaze/boot/dts/ The resulting vmlinux, with the compiled DTS linked in, will be copied to boot/simpleImage.<dts> This mirrors the same functionality as on PowerPC, albeit achieving it in a slightly different way. + strip simpleImage file The size of output file is very similar to linux.bin. vmlinux - full elf without fdt blob simpleImage.<dtb name>.unstrip - full elf with fdt blob simpleImage.<dtb name> - stripped elf with fdt blob Add symlink to generic system.dts in platform folder Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-26microblaze_mmu_v2: MakefilesMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27microblaze_v8: Makefiles for Microblaze cpuMichal Simek
Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>